From b9e818b556d15672ad589e1dbdf5f6f1ea557c78 Mon Sep 17 00:00:00 2001 From: Shawn Pearce Date: Sat, 22 Jul 2017 10:12:32 -0700 Subject: [PATCH] reftable: file format documentation Some repositories contain a lot of references (e.g. android at 866k, rails at 31k). The reftable format provides: - Near constant time lookup for any single reference, even when the repository is cold and not in process or kernel cache. - Near constant time verification a SHA-1 is referred to by at least one reference (for allow-tip-sha1-in-want). - Efficient lookup of an entire namespace, such as `refs/tags/`. - Support atomic push `O(size_of_update)` operations. - Combine reflog storage with ref storage. Change-Id: I29d0ff1eee475845660ac9173413e1407adcfbf2 --- Documentation/technical/reftable.md | 950 ++++++++++++++++++++++++++++ 1 file changed, 950 insertions(+) create mode 100644 Documentation/technical/reftable.md diff --git a/Documentation/technical/reftable.md b/Documentation/technical/reftable.md new file mode 100644 index 000000000..34f752950 --- /dev/null +++ b/Documentation/technical/reftable.md @@ -0,0 +1,950 @@ +# reftable + +[TOC] + +## Overview + +### Problem statement + +Some repositories contain a lot of references (e.g. android at 866k, +rails at 31k). The existing packed-refs format takes up a lot of +space (e.g. 62M), and does not scale with additional references. +Lookup of a single reference requires linearly scanning the file. + +Atomic pushes modifying multiple references require copying the +entire packed-refs file, which can be a considerable amount of data +moved (e.g. 62M in, 62M out) for even small transactions (2 refs +modified). + +Repositories with many loose references occupy a large number of disk +blocks from the local file system, as each reference is its own file +storing 41 bytes (and another file for the corresponding reflog). +This negatively affects the number of inodes available when a large +number of repositories are stored on the same filesystem. Readers can +be penalized due to the larger number of syscalls required to traverse +and read the `$GIT_DIR/refs` directory. + +### Objectives + +- Near constant time lookup for any single reference, even when the + repository is cold and not in process or kernel cache. +- Near constant time verification if a SHA-1 is referred to by at + least one reference (for allow-tip-sha1-in-want). +- Efficient lookup of an entire namespace, such as `refs/tags/`. +- Support atomic push with `O(size_of_update)` operations. +- Combine reflog storage with ref storage for small transactions. +- Separate reflog storage for base refs and historical logs. + +### Description + +A reftable file is a portable binary file format customized for +reference storage. References are sorted, enabling linear scans, +binary search lookup, and range scans. + +Storage in the file is organized into variable sized blocks. Prefix +compression is used within a single block to reduce disk space. Block +size and alignment is tunable by the writer. + +### Performance + +Space used, packed-refs vs. reftable: + +repository | packed-refs | reftable | % original | avg ref | avg obj +-----------|------------:|---------:|-----------:|---------:|--------: +android | 62.2 M | 36.1 M | 58.0% | 33 bytes | 5 bytes +rails | 1.8 M | 1.1 M | 57.7% | 29 bytes | 4 bytes +git | 78.7 K | 48.1 K | 61.0% | 50 bytes | 4 bytes +git (heads)| 332 b | 269 b | 81.0% | 33 bytes | 0 bytes + +Scan (read 866k refs), by reference name lookup (single ref from 866k +refs), and by SHA-1 lookup (refs with that SHA-1, from 866k refs): + +format | cache | scan | by name | by SHA-1 +------------|------:|--------:|---------------:|---------------: +packed-refs | cold | 402 ms | 409,660.1 usec | 412,535.8 usec +packed-refs | hot | | 6,844.6 usec | 20,110.1 usec +reftable | cold | 112 ms | 33.9 usec | 323.2 usec +reftable | hot | | 20.2 usec | 320.8 usec + +Space used for 149,932 log entries for 43,061 refs, +reflog vs. reftable: + +format | size | avg entry +--------------|------:|-----------: +$GIT_DIR/logs | 173 M | 1209 bytes +reftable | 5 M | 37 bytes + +## Details + +### Peeling + +References stored in a reftable are peeled, a record for an annotated +(or signed) tag records both the tag object, and the object it refers +to. + +### Reference name encoding + +Reference names are an uninterpreted sequence of bytes that must pass +[git-check-ref-format][ref-fmt] as a valid reference name. + +[ref-fmt]: https://git-scm.com/docs/git-check-ref-format + +### Network byte order + +All multi-byte, fixed width fields are in network byte order. + +### Ordering + +Blocks are lexicographically ordered by their first reference. + +### Directory/file conflicts + +The reftable format accepts both `refs/heads/foo` and +`refs/heads/foo/bar` as distinct references. + +This property is useful for retaining log records in reftable, but may +confuse versions of Git using `$GIT_DIR/refs` directory tree to +maintain references. Users of reftable may choose to continue to +reject `foo` and `foo/bar` type conflicts to prevent problems for +peers. + +## File format + +### Structure + +A reftable file has the following high-level structure: + + first_block { + header + first_ref_block + } + ref_block* + ref_index* + obj_block* + obj_index* + log_block* + log_index* + footer + +A log-only file omits the `ref_block`, `ref_index`, `obj_block` and +`obj_index` sections, containing only the file header and log block: + + first_block { + header + } + log_block* + log_index* + footer + +in a log-only file the first log block immediately follows the file +header, without padding to block alignment. + +### Block size + +The file's block size is arbitrarily determined by the writer, and +does not have to be a power of 2. The block size must be larger than +the longest reference name or log entry used in the repository, as +references cannot span blocks. + +Powers of two that are friendly to the virtual memory system or +filesystem (such as 4k or 8k) are recommended. Larger sizes (64k) can +yield better compression, with a possible increased cost incurred by +readers during access. + +The largest block size is `16777215` bytes (15.99 MiB). + +### Block alignment + +Writers may choose to align blocks at multiples of the block size by +including `padding` filled with NUL bytes at the end of a block to +round out to the chosen alignment. When alignment is used, writers +must specify the alignment with the file header's `block_size` field. + +Block alignment is not required by the file format. Unaligned files +must set `block_size = 0` in the file header, and omit `padding`. +Unaligned files with more than one ref block must include the +[ref index](#Ref-index) to support fast lookup. Readers must be +able to read both aligned and non-aligned files. + +Very small files (e.g. 1 only ref block) may omit `padding` and the +ref index to reduce total file size. + +### Header + +A 24-byte header appears at the beginning of the file: + + 'REFT' + uint8( version_number = 1 ) + uint24( block_size ) + uint64( min_update_index ) + uint64( max_update_index ) + +Aligned files must specify `block_size` to configure readers with the +expected block alignment. Unaligned files must set `block_size = 0`. + +The `min_update_index` and `max_update_index` describe bounds for the +`update_index` field of all log records in this file. When reftables +are used in a stack for [transactions](#Update-transactions), these +fields can order the files such that the prior file's +`max_update_index + 1` is the next file's `min_update_index`. + +### First ref block + +The first ref block shares the same block as the file header, and is +24 bytes smaller than all other blocks in the file. The first block +immediately begins after the file header, at position 24. + +If the first block is a log block (a log-only file), its block header +begins immediately at position 24. + +### Ref block format + +A ref block is written as: + + 'r' + uint24( block_len ) + ref_record+ + uint24( restart_offset )+ + uint16( restart_count ) + + padding? + +Blocks begin with `block_type = 'r'` and a 3-byte `block_len` which +encodes the number of bytes in the block up to, but not including the +optional `padding`. This is always less than or equal to the file's +block size. In the first ref block, `block_len` includes 24 bytes +for the file header. + +The 2-byte `restart_count` stores the number of entries in the +`restart_offset` list, which must not be empty. Readers can use +`restart_count` to binary search between restarts before starting a +linear scan. + +Exactly `restart_count` 3-byte `restart_offset` values precedes the +`restart_count`. Offsets are relative to the start of the block and +refer to the first byte of any `ref_record` whose name has not been +prefix compressed. Entries in the `restart_offset` list must be +sorted, ascending. Readers can start linear scans from any of these +records. + +A variable number of `ref_record` fill the middle of the block, +describing reference names and values. The format is described below. + +As the first ref block shares the first file block with the file +header, all `restart_offset` in the first block are relative to the +start of the file (position 0), and include the file header. This +forces the first `restart_offset` to be `28`. + +#### ref record + +A `ref_record` describes a single reference, storing both the name and +its value(s). Records are formatted as: + + varint( prefix_length ) + varint( (suffix_length << 3) | value_type ) + suffix + value? + +The `prefix_length` field specifies how many leading bytes of the +prior reference record's name should be copied to obtain this +reference's name. This must be 0 for the first reference in any +block, and also must be 0 for any `ref_record` whose offset is listed +in the `restart_offset` table at the end of the block. + +Recovering a reference name from any `ref_record` is a simple concat: + + this_name = prior_name[0..prefix_length] + suffix + +The `suffix_length` value provides the number of bytes available in +`suffix` to copy from `suffix` to complete the reference name. + +The `value` follows. Its format is determined by `value_type`, one of +the following: + +- `0x0`: deletion; no value data (see transactions, below) +- `0x1`: one 20-byte object id; value of the ref +- `0x2`: two 20-byte object ids; value of the ref, peeled target +- `0x3`: symbolic reference: `varint( target_len ) target` + +Symbolic references use `0x3`, followed by the complete name of the +reference target. No compression is applied to the target name. + +Types `0x4..0x7` are reserved for future use. + +### Ref index + +The ref index stores the name of the last reference from every ref +block in the file, enabling reduced disk seeks for lookups. Any +reference can be found by searching the index, identifying the +containing block, and searching within that block. + +The index may be organized into a multi-level index, where the 1st +level index block points to additional ref index blocks (2nd level), +which may in turn point to either additional index blocks (e.g. 3rd +level) or ref blocks (leaf level). Disk reads required to access a +ref go up with higher index levels. Multi-level indexes may be +required to ensure no single index block exceeds the file format's max +block size of `16777215` bytes (15.99 MiB). To acheive constant O(1) +disk seeks for lookups the index must be a single level, which is +permitted to exceed the file's configured block size, but not the +format's max block size of 15.99 MiB. + +If present, the ref index block(s) appears after the last ref block. + +If there are at least 4 ref blocks, a ref index block should be +written to improve lookup times. Cold reads using the index require +2 disk reads (read index, read block), and binary searching < 4 blocks +also requires <= 2 reads. Omitting the index block from smaller files +saves space. + +If the file is unaligned and contains more than one ref block, the ref +index must be written. + +Index block format: + + 'i' + uint24( block_len ) + index_record+ + uint24( restart_offset )+ + uint16( restart_count ) + + padding? + +The index blocks begin with `block_type = 'i'` and a 3-byte +`block_len` which encodes the number of bytes in the block, +up to but not including the optional `padding`. + +The `restart_offset` and `restart_count` fields are identical in +format, meaning and usage as in ref blocks. + +To reduce the number of reads required for random access in very large +files the index block may be larger than other blocks. However, +readers must hold the entire index in memory to benefit from this, so +it's a time-space tradeoff in both file size and reader memory. + +Increasing the file's block size decreases the index size. +Alternatively a multi-level index may be used, keeping index blocks +within the file's block size, but increasing the number of blocks +that need to be accessed. + +#### index record + +An index record describes the last entry in another block. +Index records are written as: + + varint( prefix_length ) + varint( (suffix_length << 3) | 0 ) + suffix + varint( block_position ) + +Index records use prefix compression exactly like `ref_record`. + +Index records store `block_position` after the suffix, specifying the +absolute position in bytes (from the start of the file) of the block +that ends with this reference. Readers can seek to `block_position` to +begin reading the block header. + +Readers must examine the block header at `block_position` to determine +if the next block is another level index block, or the leaf-level ref +block. + +#### Reading the index + +Readers loading the ref index must first read the footer (below) to +obtain `ref_index_position`. If not present, the position will be 0. +The `ref_index_position` is for the 1st level root of the ref index. + +### Obj block format + +Object blocks are optional. Writers may choose to omit object blocks, +especially if readers will not use the SHA-1 to ref mapping. + +Object blocks use unique, abbreviated 2-20 byte SHA-1 keys, mapping +to ref blocks containing references pointing to that object directly, +or as the peeled value of an annotated tag. Like ref blocks, object +blocks use the file's standard block size. The abbrevation length is +available in the footer as `obj_id_len`. + +To save space in small files, object blocks may be omitted if the ref +index is not present, as brute force search will only need to read a +few ref blocks. When missing, readers should brute force a linear +search of all references to lookup by SHA-1. + +An object block is written as: + + 'o' + uint24( block_len ) + obj_record+ + uint24( restart_offset )+ + uint16( restart_count ) + + padding? + +Fields are identical to ref block. Binary search using the restart +table works the same as in reference blocks. + +Because object identifiers are abbreviated by writers to the shortest +unique abbreviation within the reftable, obj key lengths are variable +between 2 and 20 bytes. Readers must compare only for common prefix +match within an obj block or obj index. + +#### obj record + +An `obj_record` describes a single object abbreviation, and the blocks +containing references using that unique abbreviation: + + varint( prefix_length ) + varint( (suffix_length << 3) | cnt_3 ) + suffix + varint( cnt_large )? + varint( position_delta )* + +Like in reference blocks, abbreviations are prefix compressed within +an obj block. On large reftables with many unique objects, higher +block sizes (64k), and higher restart interval (128), a +`prefix_length` of 2 or 3 and `suffix_length` of 3 may be common in +obj records (unique abbreviation of 5-6 raw bytes, 10-12 hex digits). + +Each record contains `position_count` number of positions for matching +ref blocks. For 1-7 positions the count is stored in `cnt_3`. When +`cnt_3 = 0` the actual count follows in a varint, `cnt_large`. + +The use of `cnt_3` bets most objects are pointed to by only a single +reference, some may be pointed to by a couple of references, and very +few (if any) are pointed to by more than 7 references. + +A special case exists when `cnt_3 = 0` and `cnt_large = 0`: there +are no `position_delta`, but at least one reference starts with this +abbreviation. A reader that needs exact reference names must scan all +references to find which specific references have the desired object. +Writers should use this format when the `position_delta` list would have +overflowed the file's block size due to a high number of references +pointing to the same object. + +The first `position_delta` is the position from the start of the file. +Additional `position_delta` entries are sorted ascending and relative +to the prior entry, e.g. a reader would perform: + + pos = position_delta[0] + prior = pos + for (j = 1; j < position_count; j++) { + pos = prior + position_delta[j] + prior = pos + } + +With a position in hand, a reader must linearly scan the ref block, +starting from the first `ref_record`, testing each reference's SHA-1s +(for `value_type = 0x1` or `0x2`) for full equality. Faster searching +by SHA-1 within a single ref block is not supported by the reftable +format. Smaller block sizes reduce the number of candidates this step +must consider. + +### Obj index + +The obj index stores the abbreviation from the last entry for every +obj block in the file, enabling reduced disk seeks for all lookups. +It is formatted exactly the same as the ref index, but refers to obj +blocks. + +The obj index should be present if obj blocks are present, as +obj blocks should only be written in larger files. + +Readers loading the obj index must first read the footer (below) to +obtain `obj_index_position`. If not present, the position will be 0. + +### Log block format + +Unlike ref and obj blocks, log blocks are always unaligned. + +Log blocks are variable in size, and do not match the `block_size` +specified in the file header or footer. Writers should choose an +appropriate buffer size to prepare a log block for deflation, such as +`2 * block_size`. + +A log block is written as: + + 'g' + uint24( block_len ) + zlib_deflate { + log_record+ + uint24( restart_offset )+ + uint16( restart_count ) + } + +Log blocks look similar to ref blocks, except `block_type = 'g'`. + +The 4-byte block header is followed by the deflated block contents +using zlib deflate. The `block_len` in the header is the inflated +size (including 4-byte block header), and should be used by readers to +preallocate the inflation output buffer. A log block's `block_len` +may exceed the file's block size. + +Offsets within the log block (e.g. `restart_offset`) still include +the 4-byte header. Readers may prefer prefixing the inflation output +buffer with the 4-byte header. + +Within the deflate container, a variable number of `log_record` +describe reference changes. The log record format is described +below. See ref block format (above) for a description of +`restart_offset` and `restart_count`. + +Because log blocks have no alignment or padding between blocks, +readers must keep track of the bytes consumed by the inflater to +know where the next log block begins. + +#### log record + +Log record keys are structured as: + + ref_name '\0' reverse_int64( update_index ) + +where `update_index` is the unique transaction identifier. The +`update_index` field must be unique within the scope of a `ref_name`. +See the update transactions section below for further details. + +The `reverse_int64` function inverses the value so lexographical +ordering the network byte order encoding sorts the more recent records +with higher `update_index` values first: + + reverse_int64(int64 t) { + return 0xffffffffffffffff - t; + } + +Log records have a similar starting structure to ref and index +records, utilizing the same prefix compression scheme applied to the +log record key described above. + +``` + varint( prefix_length ) + varint( (suffix_length << 3) | log_type ) + suffix + log_data { + old_id + new_id + varint( name_length ) name + varint( email_length ) email + varint( time_seconds ) + sint16( tz_offset ) + varint( message_length ) message + }? +``` + +Log record entries use `log_type` to indicate what follows: + +- `0x0`: deletion; no log data. +- `0x1`: standard git reflog data using `log_data` above. + +The `log_type = 0x0` is mostly useful for `git stash drop`, removing +an entry from the reflog of `refs/stash` in a transaction file +(below), without needing to rewrite larger files. Readers reading a +stack of reflogs must treat this as a deletion. + +For `log_type = 0x1`, the `log_data` section follows +[git update-ref][update-ref] logging, and includes: + +- two 20-byte SHA-1s (old id, new id) +- varint string of committer's name +- varint string of committer's email +- varint time in seconds since epoch (Jan 1, 1970) +- 2-byte timezone offset in minutes (signed) +- varint string of message + +`tz_offset` is the absolute number of minutes from GMT the committer +was at the time of the update. For example `GMT-0800` is encoded in +reftable as `sint16(-480)` and `GMT+0230` is `sint16(150)`. + +The committer email does not contain `<` or `>`, it's the value +normally found between the `<>` in a git commit object header. + +The `message_length` may be 0, in which case there was no message +supplied for the update. + +[update-ref]: https://git-scm.com/docs/git-update-ref#_logging_updates + +#### Reading the log + +Readers accessing the log must first read the footer (below) to +determine the `log_position`. The first block of the log begins at +`log_position` bytes since the start of the file. The `log_position` +is not block aligned. + +#### Importing logs + +When importing from `$GIT_DIR/logs` writers should globally order all +log records roughly by timestamp while preserving file order, and +assign unique, increasing `update_index` values for each log line. +Newer log records get higher `update_index` values. + +Although an import may write only a single reftable file, the reftable +file must span many unique `update_index`, as each log line requires +its own `update_index` to preserve semantics. + +### Log index + +The log index stores the log key (`refname \0 reverse_int64(update_index)`) +for the last log record of every log block in the file, supporting +bounded-time lookup. + +A log index block must be written if 2 or more log blocks are written +to the file. If present, the log index appears after the last log +block. There is no padding used to align the log index to block +alignment. + +Log index format is identical to ref index, except the keys are 9 +bytes longer to include `'\0'` and the 8-byte +`reverse_int64(update_index)`. Records use `block_position` to +refer to the start of a log block. + +#### Reading the index + +Readers loading the log index must first read the footer (below) to +obtain `log_index_position`. If not present, the position will be 0. + +### Footer + +After the last block of the file, a file footer is written. It begins +like the file header, but is extended with additional data. + +A 68-byte footer appears at the end: + +``` + 'REFT' + uint8( version_number = 1 ) + uint24( block_size ) + uint64( min_update_index ) + uint64( max_update_index ) + + uint64( ref_index_position ) + uint64( (obj_position << 5) | obj_id_len ) + uint64( obj_index_position ) + + uint64( log_position ) + uint64( log_index_position ) + + uint32( CRC-32 of above ) +``` + +If a section is missing (e.g. ref index) the corresponding position +field (e.g. `ref_index_position`) will be 0. + +- `obj_position`: byte position for the first obj block. +- `obj_id_len`: number of bytes used to abbreviate object identifiers + in obj blocks. +- `log_position`: byte position for the first log block. +- `ref_index_position`: byte position for the start of the ref index. +- `obj_index_position`: byte position for the start of the obj index. +- `log_index_position`: byte position for the start of the log index. + +#### Reading the footer + +Readers must seek to `file_length - 68` to access the footer. A +trusted external source (such as `stat(2)`) is necessary to obtain +`file_length`. When reading the footer, readers must verify: + +- 4-byte magic is correct +- 1-byte version number is recognized +- 4-byte CRC-32 matches the other 64 bytes (including magic, and version) + +Once verified, the other fields of the footer can be accessed. + +### Varint encoding + +Varint encoding is identical to the ofs-delta encoding method used +within pack files. + +Decoder works such as: + + val = buf[ptr] & 0x7f + while (buf[ptr] & 0x80) { + ptr++ + val = ((val + 1) << 7) | (buf[ptr] & 0x7f) + } + +### Binary search + +Binary search within a block is supported by the `restart_offset` +fields at the end of the block. Readers can binary search through the +restart table to locate between which two restart points the sought +reference or key should appear. + +Each record identified by a `restart_offset` stores the complete key +in the `suffix` field of the record, making the compare operation +during binary search straightforward. + +Once a restart point lexicographically before the sought reference has +been identified, readers can linearly scan through the following +record entries to locate the sought record, terminating if the current +record sorts after (and therefore the sought key is not present). + +#### Restart point selection + +Writers determine the restart points at file creation. The process is +arbitrary, but every 16 or 64 records is recommended. Every 16 may +be more suitable for smaller block sizes (4k or 8k), every 64 for +larger block sizes (64k). + +More frequent restart points reduces prefix compression and increases +space consumed by the restart table, both of which increase file size. + +Less frequent restart points makes prefix compression more effective, +decreasing overall file size, with increased penalities for readers +walking through more records after the binary search step. + +A maximum of `65535` restart points per block is supported. + +## Considerations + +### Lightweight refs dominate + +The reftable format assumes the vast majority of references are single +SHA-1 valued with common prefixes, such as Gerrit Code Review's +`refs/changes/` namespace, GitHub's `refs/pulls/` namespace, or many +lightweight tags in the `refs/tags/` namespace. + +Annotated tags storing the peeled object cost an additional 20 bytes +per reference. + +### Low overhead + +A reftable with very few references (e.g. git.git with 5 heads) +is 269 bytes for reftable, vs. 332 bytes for packed-refs. This +supports reftable scaling down for transaction logs (below). + +### Block size + +For a Gerrit Code Review type repository with many change refs, larger +block sizes (64 KiB) and less frequent restart points (every 64) yield +better compression due to more references within the block compressing +against the prior reference. + +Larger block sizes reduce the index size, as the reftable will +require fewer blocks to store the same number of references. + +### Minimal disk seeks + +Assuming the index block has been loaded into memory, binary searching +for any single reference requires exactly 1 disk seek to load the +containing block. + +### Scans and lookups dominate + +Scanning all references and lookup by name (or namespace such as +`refs/heads/`) are the most common activities performed on repositories. +SHA-1s are stored directly with references to optimize this use case. + +### Logs are infrequently read + +Logs are infrequently accessed, but can be large. Deflating log +blocks saves disk space, with some increased penalty at read time. + +Logs are stored in an isolated section from refs, reducing the burden +on reference readers that want to ignore logs. Further, historical +logs can be isolated into log-only files. + +### Logs are read backwards + +Logs are frequently accessed backwards (most recent N records for +master to answer `master@{4}`), so log records are grouped by +reference, and sorted descending by update index. + +## Repository format + +### Version 1 + +A repository must set its `$GIT_DIR/config` to configure reftable: + + [core] + repositoryformatversion = 1 + [extensions] + refStorage = reftable + +### Layout + +The `$GIT_DIR/refs` path is a file when reftable is configured, not a +directory. This prevents loose references from being stored. + +A collection of reftable files are stored in the `$GIT_DIR/reftable/` +directory: + + 00000001.log + 00000001.ref + 00000002.ref + +where reftable files are named by a unique name such as produced by +the function `${update_index}.ref`. + +Log-only files use the `.log` extension, while ref-only and mixed ref +and log files use `.ref`. extension. + +The stack ordering file is `$GIT_DIR/refs` and lists the current +files, one per line, in order, from oldest (base) to newest (most +recent): + + $ cat .git/refs + 00000001.log + 00000001.ref + 00000002.ref + +Readers must read `$GIT_DIR/refs` to determine which files are +relevant right now, and search through the stack in reverse order +(last reftable is examined first). + +Reftable files not listed in `refs` may be new (and about to be added +to the stack by the active writer), or ancient and ready to be pruned. + +### Readers + +Readers can obtain a consistent snapshot of the reference space by +following: + +1. Open and read the `refs` file. +2. Open each of the reftable files that it mentions. +3. If any of the files is missing, goto 1. +4. Read from the now-open files as long as necessary. + +### Update transactions + +Although reftables are immutable, mutations are supported by writing a +new reftable and atomically appending it to the stack: + +1. Acquire `refs.lock`. +2. Read `refs` to determine current reftables. +3. Select `update_index` to be most recent file's `max_update_index + 1`. +4. Prepare temp reftable `${update_index}_XXXXXX`, including log entries. +5. Rename `${update_index}_XXXXXX` to `${update_index}.ref`. +6. Copy `refs` to `refs.lock`, appending file from (5). +7. Rename `refs.lock` to `refs`. + +During step 4 the new file's `min_update_index` and `max_update_index` +are both set to the `update_index` selected by step 3. All log +records for the transaction use the same `update_index` in their keys. +This enables later correlation of which references were updated by the +same transaction. + +Because a single `refs.lock` file is used to manage locking, the +repository is single-threaded for writers. Writers may have to +busy-spin (with backoff) around creating `refs.lock`, for up to an +acceptable wait period, aborting if the repository is too busy to +mutate. Application servers wrapped around repositories (e.g. Gerrit +Code Review) can layer their own lock/wait queue to improve fairness +to writers. + +### Reference deletions + +Deletion of any reference can be explicitly stored by setting the +`type` to `0x0` and omitting the `value` field of the `ref_record`. +This serves as a tombstone, overriding any assertions about the +existence of the reference from earlier files in the stack. + +### Compaction + +A partial stack of reftables can be compacted by merging references +using a straightforward merge join across reftables, selecting the +most recent value for output, and omitting deleted references that do +not appear in remaining, lower reftables. + +A compacted reftable should set its `min_update_index` to the smallest of +the input files' `min_update_index`, and its `max_update_index` +likewise to the largest input `max_update_index`. + +For sake of illustration, assume the stack currently consists of +reftable files (from oldest to newest): A, B, C, and D. The compactor +is going to compact B and C, leaving A and D alone. + +1. Obtain lock `refs.lock` and read the `refs` file. +2. Obtain locks `B.lock` and `C.lock`. + Ownership of these locks prevents other processes from trying + to compact these files. +3. Release `refs.lock`. +4. Compact `B` and `C` into a temp file `${min_update_index}_XXXXXX`. +5. Reacquire lock `refs.lock`. +6. Verify that `B` and `C` are still in the stack, in that order. This + should always be the case, assuming that other processes are adhering + to the locking protocol. +7. Rename `${min_update_index}_XXXXXX` to `${min_update_index}_2.ref`. +8. Write the new stack to `refs.lock`, replacing `B` and `C` with the + file from (4). +9. Rename `refs.lock` to `refs`. +10. Delete `B` and `C`, perhaps after a short sleep to avoid forcing + readers to backtrack. + +This strategy permits compactions to proceed independently of updates. + +## Alternatives considered + +### bzip packed-refs + +`bzip2` can significantly shrink a large packed-refs file (e.g. 62 +MiB compresses to 23 MiB, 37%). However the bzip format does not support +random access to a single reference. Readers must inflate and discard +while performing a linear scan. + +Breaking packed-refs into chunks (individually compressing each chunk) +would reduce the amount of data a reader must inflate, but still +leaves the problem of indexing chunks to support readers efficiently +locating the correct chunk. + +Given the compression achieved by reftable's encoding, it does not +seem necessary to add the complexity of bzip/gzip/zlib. + +### Michael Haggerty's alternate format + +Michael Haggerty proposed [an alternate][mh-alt] format to reftable on +the Git mailing list. This format uses smaller chunks, without the +restart table, and avoids block alignment with padding. Reflog entries +immediately follow each ref, and are thus interleaved between refs. + +Performance testing indicates reftable is faster for lookups (51% +faster, 11.2 usec vs. 5.4 usec), although reftable produces a +slightly larger file (+ ~3.2%, 28.3M vs 29.2M): + +format | size | seek cold | seek hot | +---------:|-------:|----------:|----------:| +mh-alt | 28.3 M | 23.4 usec | 11.2 usec | +reftable | 29.2 M | 19.9 usec | 5.4 usec | + +[mh-alt]: https://public-inbox.org/git/CAMy9T_HCnyc1g8XWOOWhe7nN0aEFyyBskV2aOMb_fe+wGvEJ7A@mail.gmail.com/ + +### JGit Ketch RefTree + +[JGit Ketch][ketch] proposed [RefTree][reftree], an encoding of +references inside Git tree objects stored as part of the repository's +object database. + +The RefTree format adds additional load on the object database storage +layer (more loose objects, more objects in packs), and relies heavily +on the packer's delta compression to save space. Namespaces which are +flat (e.g. thousands of tags in refs/tags) initially create very +large loose objects, and so RefTree does not address the problem of +copying many references to modify a handful. + +Flat namespaces are not efficiently searchable in RefTree, as tree +objects in canonical formatting cannot be binary searched. This fails +the need to handle a large number of references in a single namespace, +such as GitHub's `refs/pulls`, or a project with many tags. + +[ketch]: https://dev.eclipse.org/mhonarc/lists/jgit-dev/msg03073.html +[reftree]: https://public-inbox.org/git/CAJo=hJvnAPNAdDcAAwAvU9C4RVeQdoS3Ev9WTguHx4fD0V_nOg@mail.gmail.com/ + +### LMDB + +David Turner proposed [using LMDB][dt-lmdb], as LMDB is lightweight +(64k of runtime code) and GPL-compatible license. + +A downside of LMDB is its reliance on a single C implementation. This +makes embedding inside JGit (a popular reimplemenation of Git) +difficult, and hoisting onto virtual storage (for JGit DFS) virtually +impossible. + +A common format that can be supported by all major Git implementations +(git-core, JGit, libgit2) is strongly preferred. + +[dt-lmdb]: https://public-inbox.org/git/1455772670-21142-26-git-send-email-dturner@twopensource.com/ + +## Future + +### Longer hashes + +Version will bump (e.g. 2) to indicate `value` uses a different +object id length other than 20. The length could be stored in an +expanded file header, or hardcoded as part of the version.