Use Character.isWhitespace() instead of Character.isSpaceChar() to
treat TABs as whitespace, too.
Change-Id: Iffc59c13357d981ede6a1e0feb6ea6ff03fb3064
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Negated patterns were handled wrongly. According to the OpenBSD
ssh_config man page,[1] a negated pattern never matches. Negated
patterns make only sense if there are positive patterns; the
negated pattern then can define exceptions for the positive
patterns.
OpenSshConfigFile did this wrongly. It handled "!foo" as "matching
everything but foo", but actually the semantics is "if the input is
"foo", this entry doesn't apply. If the input is anything else,
other patterns determine whether the entry may apply.".
[1] https://man.openbsd.org/ssh_config
Change-Id: I50f6e46581b7ece4c949eddf62f4a265573ec29e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.12:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I1c936183e1fa17ea95ada7849a75bc76af275fa3
* stable-5.11:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I6184772bdeca1b9ccecf6e400ae15604ab4f5a69
* stable-5.10:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I0f1511be5375716d41565e72b271cb956c3e847b
* stable-5.9:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: Ifa135077d8d07d2317df3b479822e30d87eca950
* stable-5.8:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I9ca7a0237f87d1d4bcaba81e709eaa67902f27e5
* stable-5.7:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I7ed3f47cb46e6c1bf483702c8925a24e88658e47
* stable-5.6:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I45d444b360485564744bf3dfad2c2f5a5e7fcdf6
* stable-5.9:
LockFile: create OutputStream only when needed
Remove ReftableNumbersNotIncreasingException
Fix stamping to produce stable file timestamps
Change-Id: I056382d1d93f3e0a95838bdd1f0be89711c8a722
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a constant in ConfigConstants, and a ConflictStyle enum in
MergeCommand.
Change-Id: Idf8e036b6b6953bec06d6923a39e5ff30c2da562
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git has different conflict resolution strategies:
* There is a tree merge strategy "ours" which just ignores any changes
from theirs ("-s ours"). JGit also has the mirror strategy "theirs"
ignoring any changes from "ours". (This doesn't exist in C git.)
Adapt StashApplyCommand and CherrypickCommand to be able to use those
tree merge strategies.
* For the resolve/recursive tree merge strategies, there are content
conflict resolution strategies "ours" and "theirs", which resolve
any conflict hunks by taking the "ours" or "theirs" hunk. In C git
those correspond to "-Xours" or -Xtheirs". Implement that in
MergeAlgorithm, and add API to set and pass through such a strategy
for resolving content conflicts.
* The "ours/theirs" content conflict resolution strategies also apply
for binary files. Handle these cases in ResolveMerger.
Note that the content conflict resolution strategies ("-X ours/theirs")
do _not_ apply to modify/delete or delete/modify conflicts. Such
conflicts are always reported as conflicts by C git. They do apply,
however, if one side completely clears a file's content.
Bug: 501111
Change-Id: I2c9c170c61c440a2ab9c387991e7a0c3ab960e07
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Similar to https://git.eclipse.org/r/c/jgit/jgit/+/175166, ignore
path that have conflicts on attributes, so that the virtual base could
be used by RecursiveMerger.
Change-Id: I99c95445a305558d55bbb9c9e97446caaf61c154
Signed-off-by: Marija Savtchouk <mariasavtchouk@google.com>
o.e.j.ssh.apache produces passphrase prompts containing
InformationalMessage items to show the fingerprint of the key
the passphrase is being asked for. Allow this so that the credentials
provider can be used with o.e.j.ssh.apache.
Change-Id: Ibc2ffd3a987d3118952726091b9b80442972dfd8
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
OpenSSH 8.4 has introduced simple environment variable substitution
for some keys. Implement that feature in our ssh config file parser,
too.
Bug: 572103
Change-Id: I360f2c5510eea4ec3329aeedf3d29dfefc9163f0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.11:
Refactor CommitCommand to improve readability
CommitCommand: fix formatting
CommitCommand: remove unncessary comment
Ensure post-commit hook is called after index lock was released
sshd: try all configured signature algorithms for a key
sshd: modernize ssh config file parsing
sshd: implement ssh config PubkeyAcceptedAlgorithms
Change-Id: Ic3235ffd84c9d7537a1fe5ff4f216578e6e26724
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
OpenSSH has changed some things in ssh config files. Update our parser
to implement some of these changes:
* ignore trailing comments on a line
* rename PubkeyAcceptedKeyTypes to PubkeyAcceptedAlgorithms
Note that for the rename, openSSH still accepts both names. We do the
same, translating names whenever we get or set values.
Change-Id: Icccca060e6a4350a7acf05ff9e260f2c8c60ee1a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Apache MINA sshd 2.6.0 appears to use only the first appropriate
public key signature algorithm for a particular key. See [1]. For
RSA keys, that is rsa-sha2-512. This breaks authentication at servers
that only know the older (and deprecated) ssh-rsa algorithm.
With PubkeyAcceptedAlgorithms, users can re-order algorithms in
the ssh config file per host, if needed. Setting
PubkeyAcceptedAlgorithms ^ssh-rsa
will put "ssh-rsa" at the front of the list of algorithms, and then
authentication at such servers with RSA keys works again.
[1] https://issues.apache.org/jira/browse/SSHD-1105
Bug: 572056
Change-Id: I86c3b93f05960c68936e80642965815926bb2532
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
In [1], improved RevWalk.getMergedInto() is introduced to avoid repeated
work while performing RevWalk.isMergedInto() on many refs. Modify
findBranchesReachableFrom() to use it.
[1] I65de9873dce67af9c415d1d236bf52d31b67e8fe
Change-Id: I81d615241638d4093df64b449637af601843a5ed
Signed-off-by: Adithya Chakilam <quic_achakila@quicinc.com>
In cases where we need to determine if a given commit is merged
into many refs, using isMergedInto(base, tip) for each ref would
cause multiple unwanted walks.
getMergedInto() marks the unreachable commits as uninteresting
which would then avoid walking that same path again.
Using the same api, also introduce isMergedIntoAny() and
isMergedIntoAll()
Change-Id: I65de9873dce67af9c415d1d236bf52d31b67e8fe
Signed-off-by: Adithya Chakilam <quic_achakila@quicinc.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There are two code paths for detecting renames: one on tree diffs
(using DiffFormatter#scan) and the other on single file diffs (using
DiffFormatter#format). The latter skips binary and large files
for rename detection - check [1], but the former doesn't.
This change skips content rename detection for the tree diffs case for
large files. This is essential to avoid expensive computations while
reading the file, especially for callers who don't want to pay that
cost. Content renames are those which involve files with slightly
modified content. Exact renames will still be identified.
The default threshold for file sizes is reused from
PackConfig.DEFAULT_BIG_FILE_THRESHOLD: 50 MB.
[1] 232876421d/org.eclipse.jgit/src/org/eclipse/jgit/diff/RawText.java (386)
Change-Id: Idbc2c29bd381c6e387185204638f76fda47df41e
Signed-off-by: Youssef Elghareeb <ghareeb@google.com>
Git config http.cookieFile must have ~ expansion, compare [1].
It also should be an absolute path. While a relative path is allowed,
C git just passes the value on to libcurl, so it'll be relative to the
current working directory and thus not work in all directories.
Log a warning if the path is relative.
(Alternatives would be to throw an exception, or to resolve the path
relative to the .git directory, or relative to the working tree root,
or relative to the config file it occurs in. But C git does not seem
to do either.)
[1] https://github.com/git/git/commit/e5a39ad8e
Bug: 571798
Change-Id: I5cdab6061d0613ac7d8cb7977e5b97f5b88f562d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add new constructors to PackFile to improve a common use case where
callers know the directory, id, and extension, but previously needed to
construct a valid file name (with prefix, '.', etc) to create a
PackFile. Most callers can use the variant that has id as an ObjectId,
but provide an id as String variant too.
Change-Id: I39e4466abe8c9509f5916d5bfe675066570b8585
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
It's easier to follow the logic here when we can use our own objects
instead of Strings.
Change-Id: I6a166edcc67903fc1ca3544f458634c4cef8fde7
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
This class already looked very much like an Enum, but wasn't one.
As an Enum, we can use PackExt in EnumMaps and EnumSets. Convert the
Map key usage in PackDirectory to an EnumMap.
Change-Id: Ice097fd468a05805f914e6862fbd1d96ec8c45d1
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Provide a recovery path for objects being referenced during the pack
pruning race. Due to the pack pruning race, it is possible for objects
to become referenced after a pack has been deemed safe to prune, but
before it actually gets pruned. If this happened previously, the newly
referenced objects would be missing and potentially result in a
corrupted ref.
Add the ability to recover from this situation when an object is missing
but happens to still be available in a pack in the "preserved"
directory. This is likely only useful when used in conjunction with the
--preserve-old-packs GC option, which prunes packs by hard-linking to
the preserved directory. If an object is missing and found in a pack in
the preserved directory, immediately recover that pack and its
associated files (idx, bitmaps...) by moving them back to the original
pack directory, and then retry the operation that would have failed due
to the missing object. This retry can now succeed and the repository
may avoid corruption. This approach should drastically reduce the
chance of a corrupt repository during pack pruning at very little extra
cost. This extra cost should only be incurred when objects are missing
and a failure would normally occur.
Change-Id: I2a704e3276b88cc892159d9bfe2455c6eec64252
Signed-off-by: Martin Fick <quic_mfick@quicinc.com>
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
The only extension that was ever consulted from the bitmap was the
bitmap index. We can simplify the Pack code as well as the code of
all the callers if we focus on just that usage.
Change-Id: I799ddfdee93142af67ce5081d14a430d36aa4c15
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Update scanPacksImpl and listPackDirectory (renamed to
getPackFilesByExtById) to use the new PackFile functionality to
validate file names and complete pack file sets (.pack, .idx, etc).
Most importantly, this allows a later change to rely on scanPacks() to
complete a packList that contains packs with the 'old-' prefix in their
extension.
This also eliminates duplication of logic for how to identify and
construct pack files.
Change-Id: I7175e5fefb187a29e0a7cf53c392aee922314f31
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
GC has several places where it tries to build files names for packs that
we can use the PackFile class for instead.
Change-Id: I99e5ceff9050f8583368fca35279251955e4644d
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
The PackFile class is intended to be a central place to do all
common pack filename manipulation and parsing to help reduce repeated
code and bugs. Use the PackFile class in the Pack class and in many
tests to ensure it works well in a variety of situations. Later changes
will expand use of PackFiles to even more areas.
Change-Id: I921b30f865759162bae46ddd2c6d669de06add4a
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A cookie file stores the expiration in seconds since the Linux Epoch,
not in milliseconds. Correct reading and writing cookie files; with
a backwards-compatibility hack to read files that contain a millisecond
timestamp.
Add a test, and fix tests not to rely on the actual current time so
that they will also run successfully after 2030-01-01 noon.
Bug: 571574
Change-Id: If3ba68391e574520701cdee119544eedc42a1ff2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
In a distributed setting, one can have multiple datacenters use
reftables for serving, while the ground truth for the Ref database is
administered centrally. In this setting, replication delays combined
with compaction can cause update-index ranges to overlap.
Such a setting is used at Google, and the JGit code already handles
this correctly (modulo a bugfix that applied in change I8f8215b99a).
Remove the restriction that was applied at FileReftableDatabase.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: I6f9ed0fbd7fbc5220083ab808b22a909215f13a9
Include the full file path of the .gitignore file and the line number
of the invalid pattern. Also include the pattern itself.
.gitignore files inside the repository are reported with their
repository-relative path; files outside (from git config
core.excludesFile or .git/info/exclude) are reported with their
full absolute path.
Bug: 571143
Change-Id: Ibe5969679bc22cff923c62e3ab9801d90d6d06d1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When a .gitignore pattern cannot be parsed include the pattern in the
log message. Just reporting "not closed bracket" isn't helpful if the
user doesn't know in which pattern the problem occurred.
Even better would be to include the full path of the .gitignore file
that contained the offending pattern. This is not implemented in this
change; it may need new API and needs more thought.
Bug: 571143
Change-Id: Id5b16d9cf550544ba3ad409a02041946fa8516ab
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
We introduced the option --initial-branch=<branch-name> to allow
initializing a new repository with a different initial branch.
To allow users to override the initial branch name more permanently
(i.e. without having to specify the name manually for each 'git init'),
introduce the 'init.defaultBranch' option.
This option was added to git in 2.28.0.
See https://git-scm.com/docs/git-config#Documentation/git-config.txt-initdefaultBranch
Bug: 564794
Change-Id: I679b14057a54cd3d19e44460c4a5bd3a368ec848
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add option --initial-branch/-b to InitCommand and the CLI init command.
This is the first step to implement support for the new option
init.defaultBranch. Both were added to git in release 2.28.
See https://git-scm.com/docs/git-init#Documentation/git-init.txt--bltbranch-namegt
Bug: 564794
Change-Id: Ia383b3f90b5549db80f99b2310450a7faf6bce4c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
jgit clone --branch foo <url>
did not fail if the remote branch "foo" didn't exist in the remote
repository being cloned.
Bug: 546580
Change-Id: I55648ad3a39da4a5711dfa8e6d6682bb8190a6d6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
`copy` is documented as possibly returning a smaller number of bytes
than requested. In practice, this can occur if a block is cached and the
reader never pulls in the file to check its size.
Bug: 565874
Change-Id: I1e53b3d2f4ab09334178934dc0ef74ea99045cd3
Signed-off-by: wh <wh9692@protonmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add a GpgSignatureVerifier interface, plus a factory to create
instances thereof that is provided via the ServiceLoader mechanism.
Implement the new interface for BouncyCastle. A verifier maintains
an internal LRU cache of previously found public keys to speed up
verifying multiple objects (tag or commits). Mergetags are not handled.
Provide a new VerifySignatureCommand in org.eclipse.jgit.api together
with a factory method Git.verifySignature(). The command can verify
signatures on tags or commits, and can be limited to accept only tags
or commits. Provide a new public WrongObjectTypeException thrown when
the command is limited to either tags or commits and a name resolves
to some other object kind.
In jgit.pgm, implement "git tag -v", "git log --show-signature", and
"git show --show-signature". The output is similar to command-line
gpg invoked via git, but not identical. In particular, lines are not
prefixed by "gpg:" but by "bc:".
Trust levels for public keys are read from the keys' trust packets,
not from GPG's internal trust database. A trust packet may or may
not be set. Command-line GPG produces more warning lines depending
on the trust level, warning about keys with a trust level below
"full".
There are no unit tests because JGit still doesn't have any setup to
do signing unit tests; this would require at least a faked .gpg
directory with pre-created key rings and keys, and a way to make the
BouncyCastle classes use that directory instead of the default. See
bug 547538 and also bug 544847.
Tested manually with a small test repository containing signed and
unsigned commits and tags, with signatures made with different keys
and made by command-line git using GPG 2.2.25 and by JGit using
BouncyCastle 1.65.
Bug: 547751
Change-Id: If7e34aeed6ca6636a92bf774d893d98f6d459181
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
As the post commit hook is run after a commit is finished, it can not
abort the commit and the exit code of this hook should not have any
effect.
This can be achieved by not throwing a AbortedByHookException exception.
The stderr output is not lost thanks to contributions for bug 553471.
Bug: 553428
Change-Id: I451a76e04103e632ff44e045561c5a41f7b7d558
Signed-off-by: Tim Neumann <Tim.Neumann@advantest.com>
Signed-off-by: Fabian Pfaff <fabian.pfaff@vogella.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
EGit wants to add gitflow specific hooks in org.eclipse.egit.gitflow.
Make GitHook public to allow sub-classing outside of the
org.eclipse.jgit.hooks package.
Change-Id: I439575ec901e3610b5cf9d66f7641c8324faa865
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
External scripts most probably expect the default charset.
Change-Id: I318a5e1d9f536a95e70c06ffb5b6f408cd40f73a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Pack better represents the purpose of the object and paves the way to
add a PackFile object that extends File.
Change-Id: I39b4f697902d395e9b6df5e8ce53078ce72fcea3
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
If RecursiveMerger finds multiple base commits, it tries to compute
the virtual ancestor to use as a base for the three way merge.
Currently, the content conflicts between ancestors are ignored (file
staged with the conflict markers). If the path is a file in one ancestor
and a dir in the other, it results in NoMergeBaseException
(CONFLICTS_DURING_MERGE_BASE_CALCULATION).
Allow these conflicts by ignoring this unmerged path in the virtual
base. The merger will compute diff in the children instead and it
can be further fixed manually if needed.
Change-Id: Id59648ae1d6bdf300b26fff513c3204317b755ab
Signed-off-by: Marija Savtchouk <mariasavtchouk@google.com>
Subclasses can use the corresponding getter methods.
Change-Id: Iaa9ab01f5a9731a264b28608d2418a9405b601d7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add it to the GpgConfig. Change GpgConfig to load the values once only.
Add a parameter to the GpgObjectSigner interface's operations to pass
in a GpgConfig. Update CommitCommand and TagCommand to pass the value
to the signer. Let the signer decide whether it can actually produce
the wanted signature type (openpgp or x509).
No behavior change. But this makes it possible to implement different
signers that might support x509 signatures, or use gpg.program and
shell out to an external GPG executable for signing.
Change-Id: I427f83eb1ece81c310e1cddd85315f6f88cc99ea
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
DateRevQueue is expected to give out the commits that have higher
commit time. But in case of tie(same commit time), it should give
the commit that is inserted first. This is inferred from the
testInsertTie test case written for DateRevQueue. Also that test
case, right now uses just two commits which caused it not to fail
with the current implementation, so added another commit to make
the test more robust.
By fixing the DateRevQueue, we would also match the behaviour of
LogCommand.addRange(c1,c2) with git log c1..c2. A test case for
the same is added to show that current behaviour is not the
expected one.
By fixing addRange(), the order in which commits are applied during
a rebase is altered. Rebase logic should have never depended upon
LogCommand.addRange() since the intended order of addRange() is not
the order a rebase should use. So, modify the RebaseCommand to use
RevWalk directly with TopoNonIntermixSortGenerator.
Add a new LogCommandTest.addRangeWithMerge() test case which creates
commits in the following order:
A - B - C - M
\ /
-D-
Using git 2.30.0, git log B..M outputs: M C D
LogCommand.addRange(B, M) without this fix outputs: M D C
LogCommand.addRange(B, M) with this fix outputs: M C D
Change-Id: I30cc3ba6c97f0960f64e9e021df96ff276f63db7
Signed-off-by: Adithya Chakilam <achakila@codeaurora.org>
Keeping the field updateDate is unecessary, as it is set and used only
in the doRename method.
Change-Id: I1cdd1adf759b75c103480db7a74cec8c2d78b794
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
Deleting non-existing files when converting to reftable without backup
caused convertToReftable to fail. Observed this on a mirrored repository
which had no reflogs. Fix this by skipping missing files during
deletion.
Change-Id: I3bb913d5bfddccc6813677b873006efb849a6ebc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
before connecting.
A socket gets bound on connect in the next line.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: I69a423c592e2fdd582b3c40099137b4ef3d05b39
This would run into an endless loop if the offset given was not zero.
Fix the logic to exit the read loop when the buffer is full.
Luckily all existing uses of this method call it only with offset zero.
Change-Id: I0ec2a4fb43efe4a605d06ac2e88cf155d50e2f1e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Reachability checkers are retrieved from RevWalk and ObjectWalk objects:
* RevWalk.createReachabilityChecker()
* ObjectWalk.createObjectReachabilityChecker()
Since RevWalks and ObjectWalks are themselves directly instantiated
in hundreds of places (e.g. UploadPack...) overriding them in a
consistent way requires overloading 100s of methods, which isn't
feasible. Moving reachability checker generation to a more central
place solves that problem.
The ObjectReader object seems a good place from which to get
reachability checkers, because reachability checkers return
information about relationships between objects. ObjectDatabases
delegate many operations to ObjectReaders, and reachability bitmaps
are attached to ObjectReaders.
The Bitmapped and Pedestrian reachability checker objects were
package private in the org.eclipse.jgit.revwalk package. This change
makes them public and moves them to the
org.eclipse.jgit.internal.revwalk package. Corresponding tests are
also moved.
Motivation:
1) Reachability checking algorithms need to scale. One of the
internal Android repositories has ~2.4 million refs/changes/*
references, causing bad long tail performance in reachability
checks.
2) Reachability check performance is impacted by repository
topography: number of refs, number of objects, amounts of
related vs. unrelated history.
3) Reachability check performance is also affected by per-branch
access (Gerrit branch permissions) since different users can
see different branches.
4) Reachability check performance isn't affected by any state in a
RevWalk or ObjectWalk.
I don't yet know if a single algorithm will work for all cases in #2
and #3. We may need to evolve the ReachabilityChecker interfaces
over time to solve the Gerrit branch permissions case, or use
Gerrit-specific identity information to solve that in an efficient
way.
This change takes the existing public API and moves it to the
ObjectReader/whole repository level, which is where we can do
consistent customizations for #2 and #3. We intend to upstream the
best of whatever works, but anticipate the need for multiple rounds
of experimentation.
Change-Id: I9185feff43551fb387957c436112d5250486833d
Signed-off-by: Terry Parker <tparker@google.com>
* changes:
Compare getting all refs except specific refs with seek and with filter
Add getsRefsByPrefixWithSkips (excluding prefixes) to ReftableDatabase
Add seekPastPrefix method to RefCursor
We sometimes want to get all the refs except specific prefixes,
similarly to getRefsByPrefix that gets all the refs of a specific
prefix.
We now create a new method that gets all refs matching a prefix except a
set of specific prefixes.
One use-case is for Gerrit to be able to get all the refs except
refs/changes; in Gerrit we often have lots of refs/changes, but very
little other refs. Currently, to get all the refs except refs/changes we
need to get all the refs and then filter the refs/changes, which is very
inefficient. With this method, we can simply skip the unneeded prefix so
that we don't have to go over all the elements.
RefDirectory still uses the inefficient implementation, since there
isn't a simple way to use Refcursor to achieve the efficient
implementation (as done in ReftableDatabase).
Signed-off-by: Gal Paikin <paiking@google.com>
Change-Id: I8c5db581acdeb6698e3d3a2abde8da32f70c854c
Adds a new FileUtils.hasFiles(Path) helper method to correctly handle
the Files.list returned Stream.
These errors were found by compiling the code using JDK11's
javac compiler.
Change-Id: Ie8017fa54eb56afc2e939a2988d8b2c5032cd00f
Signed-off-by: Terry Parker <tparker@google.com>
This method will be used by the follow-up change. This useful if we want
to go over all the changes after a specific ref.
For example, the new method allows us to create a follow-up that would
go over all the refs until we reach a specific ref (e.g refs/changes/),
and then we use seekPastPrefix(refs/changes/) to read the rest of the refs,
thus basically we return all refs except a specific prefix.
When seeking past a prefix, the previous condition that created the
RefCursor still applies. E.g, if the cursor was created by
seekRefsWithPrefix, we can skip some refs but we will not return refs
that are not starting with this prefix.
Signed-off-by: Gal Paikin <paiking@google.com>
Change-Id: I2c02e89c877fe90da8619cb8a4a9a0c865f238ef
In some circumstances (eg. compacting a stack that has deletions), the
result may have a {min, max} range that already exists. In these
cases, we would rename onto an already existing file, which does not
work on Windows. By adding a random suffix, we disambiguate the files,
and avoid this failure scenario.
Change-Id: I0273f99bb845cfbdbd8cdd582b55d3c310505d29
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Heap always copied whole blocks, which leads to AIOOBEs. LocalFile
didn't overwrite the method and thus caused NPEs.
Change-Id: Ia37d4a875df9f25d4825e6bc95fed7f0dff42afb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If the caller knows already HTTP Basic authentication will be needed
and if it also already has the username and password, preemptive
authentication is a little bit more efficient since it avoids the
initial 401 response.
Add a setPreemptiveBasicAuthentication(username, password) method
to TransportHttp. Client code could call this for instance in a
TransportConfigCallback. The method throws an IllegalStateException
if it is called after an HTTP request has already been made.
Additionally, a URI can include userinfo. Although it is not
recommended to put passwords in URIs, JGit's URIish and also the
Java URL and URI classes still allow it. The underlying HTTP
connection may omit these fields though. If present, take these
fields as additional source for preemptive Basic authentication if
setPreemptiveBasicAuthentication() has not been called.
No preemptive authentication will be done if the connection is
redirected to a different host.
Add tests.
Bug: 541327
Change-Id: Id00b975e56a15b532de96f7bbce48106d992a22b
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
TransportHttp makes several HTTP requests. The SSLContext and socket
factory must be shared over these requests, otherwise authentication
information may not be propagated correctly from one request to the
next. This is important for authentication mechanisms that rely on
client-side state, like NEGOTIATE (either NTLM, if the underlying HTTP
library supports it, or Kerberos). In particular, SPNEGO cannot
authenticate on a POST request; the authentication must come from the
initial GET request, which implies that the POST request must use the
same SSLContext and socket factory that was used for the GET.
Change the way HTTPS connections are configured. Introduce the concept
of a GitSession, which is a client-side HTTP session over several HTTPS
requests. TransportHttp creates such a session and uses it to configure
all HTTP requests during that session (fetch or push). This gives a way
to abstract away the differences between JDK and Apache HTTP connections
and to configure SSL setup outside.
A GitSession can maintain state and thus give all HTTP requests in a
session the same socket factory.
Introduce an extension interface HttpConnectionFactory2 that adds a
method to obtain a new GitSession. Implement this for both existing
HTTP connection factories. Change TransportHttp to use the new
GitSession to configure HTTP connections.
The old methods for disabling SSL verification still exist to support
possibly external connection and connection factory implementations
that do not make use of the new GitSession yet.
Bug: 535850
Change-Id: Iedf67464e4e353c1883447c13c86b5a838e678f1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Previously, TransportHttp always used the globally set connection
factory. This is problematic if that global factory is changed in
the middle of a fetch or push operation. Initialize the factory to
use in the constructor, then use that factory for all HTTP requests
made through this transport. Provide a setter and a getter for it
so that client code can customize the factory, if needed, in a
TransportConfigCallback.
Once a factory has been used on a TransportHttp instance it cannot
be changed anymore.
Make the global static factory reference volatile.
Change-Id: I7c6ee16680407d3724e901c426db174a3125ba1c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
UploadPack may log ACKs in protocol V2 that it doesn't send (if it
got a "done" from the client), or may log ACKs twice. That makes
packet log analysis difficult.
Add a new constructor to PacketLineOut to omit all logging from an
instance, and use it in UploadPack.
Change-Id: Ic29ef5f9a05cbcf5f4858a4e1b206ef0e6421c65
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This fixes errorprone error [SynchronizeOnNonFinalField]: Synchronizing
on non-final fields is not safe: if the field is ever updated, different
threads may end up locking on different objects.
Change-Id: I42fe5bde825151693e2da2d5b6cd6e1d34038dbc
File#getParent can return null which caused this spotbugs warning.
FS.FileStoreAttributes#get already gets the parent directory if the
passed File is not a directory and checks for null. Hence there is no
need to get the parent directory in the FileSnapshot constructor.
Change-Id: I77f71503cffb05970ab8d9ba55b69c96c53098b9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If file doesn't exist set state to MISSING_FILE immediately. Doing that
by calling File#lastModified and File#length effectively does the same
since they set the value to 0 if the file doesn't exist.
Log an error if a different exception than NoSuchFileException is
caught.
Change-Id: I0d4396b9f80446692a088d17522d64f735ce6708
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (stateless protocol, simplified ACK handling,
delimiters, section headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. The SSH tests are much slower and much more
focused on the SSH protocol and SSH key handling. Factor out two
very simple cloning and pulling tests and make those run with
protocol V2.
Bug: 553083
Change-Id: I357c7f5daa7efb2872f1c64ee6f6d54229031ae1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
On Android, the co-variant override of ConcurrentHashMap.keySet()
introduced in Java 8 was undone. [1] If compiled Java code calls that
co-variant override directly, one gets a NoSuchMethodError exception
at run-time on Android.
Making the code call that method via Map.keySet() side-steps this
problem.
This is similar to bug 496262, where the same problem cropped up when
compiling with Java 8 against a Java 7 target, but here we cannot use
bootclasspath. We build against Java 8, not against the Android version
of it.
Recent Android versions should have some bytecode "magic" that adds the
co-variant override in bytecode (see the commit referenced in [1]), but
on older Android version this problem may still occur. (Or perhaps the
"magic" is ineffective...) There are two pull requests on Github for
this problem, both from 2020, [2][3] while the Android commit [1] is
from March 2018. Apparently people still occasionally run into this
problem in the wild.
[1] 0e8b937ded/ojluni/src/main/java/java/util/concurrent/ConcurrentHashMap.java (1244)
[2] https://github.com/eclipse/jgit/pull/104
[3] https://github.com/eclipse/jgit/pull/100
Change-Id: I7c07e0cc59871cb7fe60795e22867827fa9c2458
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If a file exists in head, merge, and the working tree, but not in
the index, and we're doing a force checkout, the checkout must be
an "update", not a "keep".
This is a follow-up on If3a9b9e60064459d187c7db04eb4471a72c6cece.
Bug: 569962
Change-Id: I59a7ac41898ddc1dd90e86b09b621a41fdf45667
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This fixes two warnings of type LI_LAZY_INIT_STATIC.
Change-Id: I26a7a48aed9d0a0547e908a56b7014a7620fadd8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use a dedicated Lock object to lock the scheduler in
RepositoryCache#configureEviction to fix spotbugs warning
JLM_JSR166_UTILCONCURRENT_MONITORENTER.
Change-Id: I003dcf0ed1a0a3f4eea5d8a2f51a07473d28a928
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Path#getParent can return null, return fallback filestore attributes in
that case.
Change-Id: Ic09484d527bc87b27964b625e07373b82412f2da
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes spotbugs warning NP_EQUALS_SHOULD_HANDLE_NULL_ARGUMENT.
This implementation violated the contract defined by
java.lang.Object.equals() because it did not check for null being passed
as the argument. All equals() methods should return false if passed a
null value.
Change-Id: I607f6979613d390aae2f3546b587f63133d6d73c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes UL_UNRELEASED_LOCK_EXCEPTION_PATH raised by spotbugs in
#compactFully.
Change-Id: I370578ad9a027c5c9709d60a1dfafdac0cfca908
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes UL_UNRELEASED_LOCK_EXCEPTION_PATH raised by spotbugs in
#DfsReftableDatabase and #clearCache.
Change-Id: Ifd3189288d2a8e64139c02cd105eb335fa2f68cf
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also mark the return value @Nullable to enable null analysis in Eclipse.
Change-Id: I5b286d657d432f4b32afd4dd370f76892b115422
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This reverts commit 022b02dea1.
Removing this API warning filter was wrong since we intentionally
removed the config constant CONFIG_REFSTORAGE_REFTREE.
Change-Id: Ie068e539157cc2312efc8a07feabeb0dd2f75096
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File#list can return null. Fix the potential NPE by using Files#list
which is also faster since it retrieves directory entries lazily while
File#list retrieves them eagerly.
Change-Id: Idf4bda398861c647587e357326b8bc8b587a2584
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File#listFiles can return null. Use Files#list which does not return
null and should be faster since it's returning directory entries lazily
while File#listFiles fetches them eagerly.
Change-Id: I3bfe2a52278244fc469143692c06b05d9af0d0d4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If TransportException is thrown in the finally block of execute()
ensure that the exception handled in the previous catch block isn't
suppressed.
Change-Id: I670acdfb4d36e7a419a9a79ae9faab2e085a43ee
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If TransportException is thrown in the finally block of
downloadPackedObject() ensure that the exception handled in the previous
catch block isn't suppressed.
Change-Id: I23982a2b215e38f681cc1719788985e60232699a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This was experimental code and never used in production.
Change-Id: Ia3da7f2b82d9e365cec2ccf9397cbc47439cd150
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The ObjectDirectory class manages the interactions for the entire object
database, this includes loose objects, packfiles, alternates, and
shallow commits. To help reduce the complexity of this class, abstract
some of the loose object specific details into a class which understands
just this, leaving the ObjectDirectory to focus more on the interactions
between the different mechanisms.
Change-Id: I39f3a74d6308f042a2a2baa57769f4acde5ba5e0
Signed-off-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.9:
Fix stamping to produce stable file timestamps
Change-Id: Icd092cd9b883556fcbd115c17346a9d88dc172ce
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The ObjectDirectory class manages the interactions for the entire object
database, this includes loose objects, packfiles, alternates, and
shallow commits. To help reduce the complexity of this class, abstract
some of the packfile specific details into a class which understands
just this, leaving the ObjectDirectory to focus more on the interactions
between the different mechanisms.
Change-Id: I5cc87b964434b0afa860b3fe23867a77b3c3a4f2
Signed-off-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Some clients may wish to allow NO_CHANGE lightweight tag updates
without setting the force flag. (For instance EGit does so.)
Command-line git does not allow this.
Propagate the RefUpdate result via the RefAlreadyExistsException.
That way a client has the possibility to catch it and check the
failure reason without having to parse the exception message, and
take appropriate action, like ignoring the exception on NO_CHANGE.
Change-Id: I60e7a15a3c309db4106cab87847a19b6d24866f6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
JGit treated a NO_CHANGE RefUpdate as an error in all cases. But when
updating a lightweight tag, this is a successful result if -f was
specified.
Change-Id: Iddfa6d6a6dc8bf8fed81138a008ebc32d5f960bd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add the two config constants from C git that can switch on signing
of annotated tags. Add them to the GpgConfig, and implement actually
signing a tag in TagCommand.
The interactions between command line options for "git tag" and config
options is a bit murky in C git. There are two config settings for it:
* tag.gpgSign is the main option, if set to true, it kicks in if
neither -s nor -u are given on the command line.
* tag.forceSignAnnotated signs only tags created via "git tag -m",
but only if command-line option "-a" is not present. It applies
even if tag.gpgSign is set explicitly to false.
Giving -s or -u on the command line also forces an annotated tag
since lightweight tags cannot be signed.
Bug: 386908
Change-Id: Ic8a1a44b5f12f47d5cdf3aae2456c1f6ca9ef057
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Factor out a common ObjectBuilder as super class of CommitBuilder
and TagBuilder, and make the GpgSigner work on ObjectBuilder.
In order not to break API, add the new method for signing an
ObjectBuilder in a new interface GpgObjectSigner.
The signature for a tag is just tacked onto the end of the tag
message. The message of a signed tag must end in LF.
Bug: 386908
Change-Id: I5e021e3c927f4051825cd7355b129113b949455e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Observed the error when trying to force checkout from a branch
that had no changes on it. When the 'keep()' method from 'DirCacheCheckout'
method was called the 'DirCacheEntry e' was null and was passed like
this to the 'checkoutEntry()' method where the 'getObjectId()' is
being called on the 'e' object
Change-Id: If3a9b9e60064459d187c7db04eb4471a72c6cece
We are running several servers with jGit. We need to run repack from
time to time to keep the repos performant. I.e. after push we test how
many small packs are in the repo and when a threshold is reached we run
the repack.
After upgrading jGit version we've found that if someone does the clone
at the time repack is running the clone sometimes (not always) fails
because the repack removes .pack file used by the clone. Server
exception and client error attached.
I've tracked down the cause and it seems to be introduced between jGit
5.2 (which we upgraded from) and 5.3 and being caused by this commit:
Move throw of PackInvalidException outside the catch -
afef866a44
The problem is that when the throw was inside of the try block the last
catch block catched the exception and called openFailed(false) method.
It is true that it called it with invalidate = false, which is wrong.
The real problem though is that with the throw outside of the try block
the openFail is not called at all and the fields activeWindows and
activeCopyRawData are not set to 0. Which affects the later called tests
like: if (++activeCopyRawData == 1 && activeWindows == 0).
The fix for this is relatively simple keeping the throw outside of the
try block and still having the invalid field set to true. I did
exhaustive testing of the change running concurrent clones and pushes
indefinitely and with the patch applied it never fails while without the
patch it takes relatively short to get the error.
See: https://www.eclipse.org/lists/jgit-dev/msg04014.html
Bug: 569349
Change-Id: I9dbf8801c8d3131955ad7124f42b62095d96da54
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This would allow other JGit users to access and reuse the constants.
Change-Id: I1608802f45586af5f8582afa592e26679e9cebe3
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A SymbolicRef is added to the advertised refs for any symref in
capabilities whose target is an advertised ref; this may replace an
existing entry, such as HEAD.
When cloning, if any advertised HEAD is symbolic then use the target
rather than looking for an advertised ref with a matching objectId.
Add --symref option to LsRemote command.
Bug: 514052
Change-Id: Idfb48e6f6e8dcfe57a6896883fe6d84d533aa9d0
Signed-off-by: Lee Worrall <worrall.la@gmail.com>
- log an error
- either there is no list or it is incomplete hence return immediately
Change-Id: Ieee5378ca06304056b9ccc30c1acd5f52360052d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If pack or index files are guarded by a pack lock (.keep file)
deleteOrphans() should not touch the respective files protected by the
lock file. Otherwise it may interfere with PackInserter concurrently
inserting a new pack file and its index.
The problem was caused by the following race.
All mentioned files are located in "objects/pack/".
File endings relevant in "pack" dir:
.pack
.keep
.idx
.bitmap
When ReceivePack receives a pack file it executes the following steps:
ReceivePack.service():
receivePackAndCheckConnectivity():
receivePack():
receive the pack
parse the pack, returns packLock (.keep file)
PackInserter.flush():
write tmpPck file: "insert_<random>.pack"
write tmpIdx file: "insert_<random>.idx"
real pack name: "pack-<SHA1>.pack"
real index name: "pack-<SHA1>.idx"
atomic rename tmpPack to realPack
atomic rename tmpIdx to tmpIdx
execute commands
unlock pack by removing .keep file
trigger auto gc if enabled
When PackInserter.flush() renames the temporary pack to the final
"pack-xxx.pack" file the temporary pack index file "insert_xxx.idx"
has no matching .pack file with the same base name for a short interval.
If deleteOrphans() ran during that interval it deduced the pack index
file was orphaned. Subsequently the missing pack index caused
MissingObjectExceptions since objects contained in the pack couldn't be
looked up anymore.
Bug: https://bugs.chromium.org/p/gerrit/issues/detail?id=13544
Change-Id: I559c81e4b1d7c487f92a751bd78b987d32c98719
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Just allocate the two string objects directly. The previously used
new StringBuilder(0).toString() returns the same object for both END
and DELIM when run on Java 15, which breaks the wire protocol since
then END and DELIM cannot be distinguished anymore.
Bug: 568950
Change-Id: I9d54d7bf484948c24b51a094256bd9d38b085f35
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
(cherry picked from commit 7da0f0a8f3)
Just allocate the two string objects directly. The previously used
new StringBuilder(0).toString() returns the same object for both END
and DELIM when run on Java 15, which breaks the wire protocol since
then END and DELIM cannot be distinguished anymore.
Bug: 568950
Change-Id: I9d54d7bf484948c24b51a094256bd9d38b085f35
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
(cherry picked from commit 7da0f0a8f3)
Just allocate the two string objects directly. The previously used
new StringBuilder(0).toString() returns the same object for both END
and DELIM when run on Java 15, which breaks the wire protocol since
then END and DELIM cannot be distinguished anymore.
Bug: 568950
Change-Id: I9d54d7bf484948c24b51a094256bd9d38b085f35
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
DirCacheEditor unconditionally applied a PathEdit to all stages in the
index. This gives wrong results if one wants to check out a file from
some commit to resolve a conflict: JGit would update the working tree
file multiple times (once per stage), and set all stages to point to
the checked-out blob.
C git replaces the stages by the entry for the checked-out file.
To support this, add a DirCacheEntry.setStage() method so that
CheckoutCommand can force the stage to zero. In DirCacheEditor, keep
only the zero stage if the PathEdit re-set the stage.
Bug: 568038
Change-Id: Ic7c635bb5aaa06ffaaeed50bc5e45702c56fc6d1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Due to Java bug JDK-8220793 [1] Java cannot set timestamps of a symlink
but only of the symlink target. This bug was fixed in Java 13. Since we
don't have a use case to set the timestamp of the symlink itself simply
document the current behavior of setLastModified methods.
[1] https://bugs.openjdk.java.net/browse/JDK-8220793
Change-Id: Ibc28c1702a1b9845602bd257606fbd44803a43fb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
PerformanceLogContext threw NullPointerException when multiple threads
tried to add an event to the PerformanceLogContext. The cause for this
is that the ThreadLocal was initialized only in the class constructor
for the first thread; for subsequent threads it was null.
To fix this initialize eventRecords for each thread.
Change-Id: I18ef67dff8f0488e3ad28c9bbc18ce73d5168cf9
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix IOException occurring when calling
GC on a repository with absent objects/pack folder.
Change-Id: I5be1333a0726f4d7491afd25ddac85451686c30a
Signed-off-by: Nail Samatov <sanail@yandex.ru>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This reverts commit f802f06e7f.
I had misunderstood how protocol V2 works. This implementation only
works if the negotiation during fetch is done in one round.
Fixing this is substantial work in BasePackFetchConnection. Basically
I think I'd have to change back negotiate to the V0 version, and have
a doFetch() that does
if protocol V2
doFetchV2()
else
doFetchV0()
with doFetchV0 the old code, and doFetchV2 completely new.
Plus there would need to be a HTTP test case requiring several
negotiation rounds.
This is a couple of days work at least, and I don't know when I will
have the time to revisit this. So although the rest of the code is
fine I prefer to back this out completely and not leave a only half
working implementation in the code for an indeterminate time.
Bug: 553083
Change-Id: Icbbbb09882b3b83f9897deac4a06d5f8dc99d84e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (simplified ACK handling, delimiters, section
headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. Do the same for the SSH transport tests.
Bug: 553083
Change-Id: Ice9866aa78020f5ca8f397cde84dc224bf5d41b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This problem occurred when calling SubmoduleWalk#getModuleName if the
first submodule processed has a name and a path which do not match
SubmoduleWalk#getModuleName returned the module path instead of the
module name. In order to fix this SubmoduleWalk#getModuleName needs to
ensure that the modules config is loaded.
Bug: 565776
Change-Id: I36ce1fbc64c4849f9d8e39864b825c6e28d344f8
Signed-off-by: John Dallaway <john@dallaway.org.uk>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add new performance logging to register events of type duration.
The proposed logging is similar to the performance logging
in OS Gerrit https://gerrit-review.googlesource.com/c/gerrit/+/225628:
a global Singleton (LoggingContext in Gerrit) is
collecting the performance logs in a thread-safe events list,
and at the end of the monitored command the list of events is
retrieved and written to a log, after which it is cleared.
What this patch does:
The main component is the Singleton (PerformanceLogContext), which
is used to collect the records (PerformanceLogRecord) in one place
(ThreadLocal eventsList) from anywhere using
PerformanceLogContext.getInstance().addEvent().
Reason why this change is needed:
The current monitoring in JGit has several issues:
1. git fetch and git push events are handled separately
(PackStatistics and ReceivedPackStatistics), with no unified way
of writing or reading the statistics.
2. PostUploadHook is only invoked on the event of sending the
pack, which means that the PackStatistics is not available for
the fetch requests that did not end with sending the pack
(negotiation requests).
3. The way the logs are created is different from the performance
log approach, so the long-running operations need to be collected
from both performance log (for JGit DFS overridden operations and
Gerrit operations) and gitlog (for JGit ones).
The proposed performance logging is going to solve the above
mentioned issues: it collects all of the performance logs in one
place, thus accounting for the commands that do not result in
sending a pack. The logs are compatible with the ones on Gerrit.
Moreover, the Singleton is accessible anywhere in the call stack,
which proved to be successful in other projects like Dapper
(https://research.google/pubs/pub36356/).
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Change-Id: Iabfe667a3412d8a9db94aabb0f39b57f43469c41
This enables jgit to use any refs in the refs/ namespace when describing
commits.
Signed-off-by: Jason Yeo <jasonyeo88@gmail.com>
Change-Id: I1fa22d1c39c0e2f5e4c2938c9751d8556494ac26
Reason why this change is needed:
Currently the durations of fetch events are computed by
registering time instants with System.currentTimeMillis()
and calculating the differences with simple minus operation,
but multiple sources suggest that the best practice is to use
the Java 8 Duration and Instant objects.
What this patch does:
Get time measurements with Instant.now() instead of
System.currentTimeMillis() and calculate the duration of fetch
events (Reachability checks and Negotiation) using
Duration.between().toMillis().
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Change-Id: I573a0a0562070083cf5a5a196d9710f69a7fa587
Building with Bazel is failing with this error message:
HttpSupport.java:480: error: [OperatorPrecedence] Use grouping
parenthesis to make the operator precedence explicit
if (c >= 'a' && c <= 'z' || c >= 'A' && c <= 'Z') {
^
(see https://errorprone.info/bugpattern/OperatorPrecedence)
Did you mean 'if ((c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')) {'?
Change-Id: I96089d3158d06ba981cfdf2b03865261b328de23
Validate the extra headers and log but otherwise ignore invalid
headers. An empty http.extraHeader starts the list afresh.
The http.userAgent is restricted to printable 7-bit ASCII, other
characters are replaced by '.'.
Moves a support method from the ssh.apache bundle to HttpSupport in
the main JGit bundle.
Bug:541500
Change-Id: Id2d8df12914e2cdbd936ff00dc824d8f871bd580
Signed-off-by: James Wynn <james@jameswynn.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Thomas Wolf