Add streams that can encode or decode git binary patch data on the fly.
Git writes binary patches base-85 encoded, at most 52 un-encoded bytes,
with the unencoded data length prefixed in a one-character encoding, and
suffixed with a newline character.
Add a test for both the new input and the output stream. The test
roundtrips binary data of different lengths in different ways.
Bug: 371725
Change-Id: Ic3faebaa4637520f5448b3d1acd78d5aaab3907a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add an implementation for base-85 encoding and decoding [1]. Git binary
patches use this format.
Base-85 encoding assembles bytes as 32-bit MSB values, then converts
these values to base-85 numbers (always 5 bytes) encoded as printable
ASCII characters. Decoding base-85 is the reverse operation. Note
that decoding may overflow on invalid input as 85^5 > 2^32. Encodings
always have a length that is a multiple of 5. If input length is not
divisible by 4, padding bytes are (logically) added, which are ignored
when decoding. The encoding for n bytes has thus always exactly length
(n + 3) / 4 * 5 in integer arithmetic (truncating division).
Includes tests.
[1] https://datatracker.ietf.org/doc/html/rfc1924
Bug: 371725
Change-Id: Ib5b9a503cd62cf70e080a4fb38c8cd1eeeaebcfe
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Rather than getting all ref names and prefixes and saving them
in memory to perform the check for conflicting names, rely on
RefDirectory.isNameConflicting as it is no longer an expensive
call after it was optimized in Ie994fc.
The old optimization to save ref names and prefixes in memory
was targeted towards making clones faster. With this change,
the clone performance is unaffected when tests were done with
repos containing many(~500k) refs.
Here are few recorded elapsed times for creating 10 branches
using BatchRefUpdate on NFS based repositories with varying
loose refs count. As seen here, this change helps improve the
BatchRefUpdate performance from O(n^2) to O(1).
loose_refs_count with_change without_change
50 241 ms 310 ms
300 263 ms 1502 ms
1k 181 ms 4241 ms
2k 204 ms 6440 ms
9k 158 ms 25930 ms
20k 154 ms 60443 ms
50k 171 ms 135199 ms
110k 157 ms 329450 ms
160k 209 ms 396328 ms
This update improves the Gerrit notedb migration performance
as it uses BatchRefUpdate to write change meta refs similar to
the test performed above.
Change-Id: I853ac6c7feb4b39c3156c01876b38cbd182accfe
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Update tests to record the number of events fired post-setup and only
assert for events fired during BatchRefUpdate.execute. For tests which
use writeLooseRef to setup refs, create new tests which assert the
number of RefsChangedEvent(s) rather than updating the existing ones
to call RefDirectory.exactRef as it changes the code path.
Change-Id: I0187811628d179d9c7e874c9bb8a7ddb44dd9df4
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Avoid having to scan over ALL loose refs to determine if the
name is nested within or is a container of an existing reference.
This can get really expensive if there are too many loose refs.
Instead use exactRef and getRefsByPrefix which scan based on a
prefix.
With a simple shell script(like below) using jgit client to create
1k refs in a new repository on NFS, this change brings down the time
from 12mins to 7mins.
for ref in $(seq 1 1000); do
jgit branch "$ref"
done
Here are few recorded elapsed times to create a new branch on NFS
based repositories with varying loose refs count. As we see here,
this change improves the name conflicting check from O(n^2) to O(1).
loose_refs_count with_change without_change
50 44 ms 164 ms
300 45 ms 1193 ms
1k 38 ms 2610 ms
2k 44 ms 6003 ms
9k 46 ms 27860 ms
20k 45 ms 48591 ms
50k 51 ms 135471 ms
110k 43 ms 294252 ms
160k 52 ms 430976 ms
Change-Id: Ie994fc184b8f82811bfb37b111eb9733dbe3e6e0
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Applying a patch on Windows failed if the patch had the (normal)
single-LF line endings, but the file on disk had the usual Windows
CR-LF line endings.
Git (and JGit) compute diffs on the git-internal blob, i.e., after
CR-LF transformation and clean filtering. Applying patches to files
directly is thus incorrect and may fail if CR-LF settings don't
match, or if clean/smudge filtering is involved.
Change ApplyCommand to run the file content through the check-in
filters before applying the patch, and run the result through the
check-out filters. This makes patch application succeed even if the
patch has single-LFs, but the file has CR-LF and core.autocrlf is
true.
Add tests for various combinations of line endings in the file and in
the patch, and a test to verify the clean/smudge handling.
See also [1].
Running the file though clean/smudge may give strange results with
LFS-managed files. JGit's DiffFormatter has some extra code and
applies the smudge filter again after having run the file through
the check-in filters (CR-LF and clean). So JGit can actually produce
a diff on LFS-managed files using the normal diff machinery. (If it
doesn't run out of memory, that is. After all, LFS is intended for
_large_ files.) How such a diff would be applied with either C git
or JGit is entirely unclear; neither has any code for this special
case. Compare also [2].
Note that C git just doesn't know about LFS and always diffs after
the check-in filter chain, so for LFS files, it'll produce a diff
of the LFS pointers.
[1] https://github.com/git/git/commit/c24f3abac
[2] https://github.com/git-lfs/git-lfs/issues/440
Bug: 571585
Change-Id: I8f71ff26313b5773ff1da612b0938ad2f18751f5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Use Character.isWhitespace() instead of Character.isSpaceChar() to
treat TABs as whitespace, too.
Change-Id: Iffc59c13357d981ede6a1e0feb6ea6ff03fb3064
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Negated patterns were handled wrongly. According to the OpenBSD
ssh_config man page,[1] a negated pattern never matches. Negated
patterns make only sense if there are positive patterns; the
negated pattern then can define exceptions for the positive
patterns.
OpenSshConfigFile did this wrongly. It handled "!foo" as "matching
everything but foo", but actually the semantics is "if the input is
"foo", this entry doesn't apply. If the input is anything else,
other patterns determine whether the entry may apply.".
[1] https://man.openbsd.org/ssh_config
Change-Id: I50f6e46581b7ece4c949eddf62f4a265573ec29e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
- bazlets need to be updated to react on Maven central no longer
supporting http protocol but only https
- update bazel to 2.0
Change-Id: I07f5f050f3b1db2014a5198a28b6bbf893434814
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit d74daad1e0)
* master: (34 commits)
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
LockFile: create OutputStream only when needed
Add a cgit interoperability test for LockFile
Add TemporaryBuffer.toString(int limit)
LockFile: create OutputStream only when needed
Prepare 5.12.0-SNAPSHOT builds
JGit v5.12.0.202105051250-m2
Update jetty to 9.4.40.v20210413
[releng] Update eclipse-jarsigner-plugin to 1.3.1
Implement ours/theirs content conflict resolution
ssh: ensure list is modifiable before using Iterator.remove().
Update orbit to S20210406213021 and add 4.20-staging target
Fix typo in test method name
Allow file mode conflicts in virtual base commit on recursive merge.
sshd: don't lock the known_hosts files on reading
Allow info messages in UsernamePasswordCredentialsProvider
ssh config: do environment variable replacement
sshd: implement server-sig-algs SSH extension (client side)
Upgrade ecj to 3.25.0
...
Change-Id: Ibc39a9c4e431d15b67ab4a307241f47a7f3740a9
* stable-5.12:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I1c936183e1fa17ea95ada7849a75bc76af275fa3
* stable-5.11:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I6184772bdeca1b9ccecf6e400ae15604ab4f5a69
* stable-5.10:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I0f1511be5375716d41565e72b271cb956c3e847b
* stable-5.9:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: Ifa135077d8d07d2317df3b479822e30d87eca950
* stable-5.8:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I9ca7a0237f87d1d4bcaba81e709eaa67902f27e5
* stable-5.7:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I7ed3f47cb46e6c1bf483702c8925a24e88658e47
* stable-5.6:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I45d444b360485564744bf3dfad2c2f5a5e7fcdf6
* stable-5.9:
LockFile: create OutputStream only when needed
Remove ReftableNumbersNotIncreasingException
Fix stamping to produce stable file timestamps
Change-Id: I056382d1d93f3e0a95838bdd1f0be89711c8a722
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a constant in ConfigConstants, and a ConflictStyle enum in
MergeCommand.
Change-Id: Idf8e036b6b6953bec06d6923a39e5ff30c2da562
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git has different conflict resolution strategies:
* There is a tree merge strategy "ours" which just ignores any changes
from theirs ("-s ours"). JGit also has the mirror strategy "theirs"
ignoring any changes from "ours". (This doesn't exist in C git.)
Adapt StashApplyCommand and CherrypickCommand to be able to use those
tree merge strategies.
* For the resolve/recursive tree merge strategies, there are content
conflict resolution strategies "ours" and "theirs", which resolve
any conflict hunks by taking the "ours" or "theirs" hunk. In C git
those correspond to "-Xours" or -Xtheirs". Implement that in
MergeAlgorithm, and add API to set and pass through such a strategy
for resolving content conflicts.
* The "ours/theirs" content conflict resolution strategies also apply
for binary files. Handle these cases in ResolveMerger.
Note that the content conflict resolution strategies ("-X ours/theirs")
do _not_ apply to modify/delete or delete/modify conflicts. Such
conflicts are always reported as conflicts by C git. They do apply,
however, if one side completely clears a file's content.
Bug: 501111
Change-Id: I2c9c170c61c440a2ab9c387991e7a0c3ab960e07
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Similar to https://git.eclipse.org/r/c/jgit/jgit/+/175166, ignore
path that have conflicts on attributes, so that the virtual base could
be used by RecursiveMerger.
Change-Id: I99c95445a305558d55bbb9c9e97446caaf61c154
Signed-off-by: Marija Savtchouk <mariasavtchouk@google.com>
Similar to git config file reading lock the file only when writing.
There may still be lock conflicts on writing, but those in the worst
case result in an entry not being added and thus being asked for later
again.
Because the OpenSshServerkeyDatabase and its HostKeyFiles may be (and
usually are) shared between different SSH sessions, we still need to
ensure in-process mutual exclusion.
Bug: 559548
Change-Id: I4af97628deff9eaac2520576917c856949f2680d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
o.e.j.ssh.apache produces passphrase prompts containing
InformationalMessage items to show the fingerprint of the key
the passphrase is being asked for. Allow this so that the credentials
provider can be used with o.e.j.ssh.apache.
Change-Id: Ibc2ffd3a987d3118952726091b9b80442972dfd8
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
OpenSSH 8.4 has introduced simple environment variable substitution
for some keys. Implement that feature in our ssh config file parser,
too.
Bug: 572103
Change-Id: I360f2c5510eea4ec3329aeedf3d29dfefc9163f0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Thomas Wolf