If RecursiveMerger finds multiple base commits, it tries to compute
the virtual ancestor to use as a base for the three way merge.
Currently, the content conflicts between ancestors are ignored (file
staged with the conflict markers). If the path is a file in one ancestor
and a dir in the other, it results in NoMergeBaseException
(CONFLICTS_DURING_MERGE_BASE_CALCULATION).
Allow these conflicts by ignoring this unmerged path in the virtual
base. The merger will compute diff in the children instead and it
can be further fixed manually if needed.
Change-Id: Id59648ae1d6bdf300b26fff513c3204317b755ab
Signed-off-by: Marija Savtchouk <mariasavtchouk@google.com>
DateRevQueue is expected to give out the commits that have higher
commit time. But in case of tie(same commit time), it should give
the commit that is inserted first. This is inferred from the
testInsertTie test case written for DateRevQueue. Also that test
case, right now uses just two commits which caused it not to fail
with the current implementation, so added another commit to make
the test more robust.
By fixing the DateRevQueue, we would also match the behaviour of
LogCommand.addRange(c1,c2) with git log c1..c2. A test case for
the same is added to show that current behaviour is not the
expected one.
By fixing addRange(), the order in which commits are applied during
a rebase is altered. Rebase logic should have never depended upon
LogCommand.addRange() since the intended order of addRange() is not
the order a rebase should use. So, modify the RebaseCommand to use
RevWalk directly with TopoNonIntermixSortGenerator.
Add a new LogCommandTest.addRangeWithMerge() test case which creates
commits in the following order:
A - B - C - M
\ /
-D-
Using git 2.30.0, git log B..M outputs: M C D
LogCommand.addRange(B, M) without this fix outputs: M D C
LogCommand.addRange(B, M) with this fix outputs: M C D
Change-Id: I30cc3ba6c97f0960f64e9e021df96ff276f63db7
Signed-off-by: Adithya Chakilam <achakila@codeaurora.org>
This would run into an endless loop if the offset given was not zero.
Fix the logic to exit the read loop when the buffer is full.
Luckily all existing uses of this method call it only with offset zero.
Change-Id: I0ec2a4fb43efe4a605d06ac2e88cf155d50e2f1e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Reachability checkers are retrieved from RevWalk and ObjectWalk objects:
* RevWalk.createReachabilityChecker()
* ObjectWalk.createObjectReachabilityChecker()
Since RevWalks and ObjectWalks are themselves directly instantiated
in hundreds of places (e.g. UploadPack...) overriding them in a
consistent way requires overloading 100s of methods, which isn't
feasible. Moving reachability checker generation to a more central
place solves that problem.
The ObjectReader object seems a good place from which to get
reachability checkers, because reachability checkers return
information about relationships between objects. ObjectDatabases
delegate many operations to ObjectReaders, and reachability bitmaps
are attached to ObjectReaders.
The Bitmapped and Pedestrian reachability checker objects were
package private in the org.eclipse.jgit.revwalk package. This change
makes them public and moves them to the
org.eclipse.jgit.internal.revwalk package. Corresponding tests are
also moved.
Motivation:
1) Reachability checking algorithms need to scale. One of the
internal Android repositories has ~2.4 million refs/changes/*
references, causing bad long tail performance in reachability
checks.
2) Reachability check performance is impacted by repository
topography: number of refs, number of objects, amounts of
related vs. unrelated history.
3) Reachability check performance is also affected by per-branch
access (Gerrit branch permissions) since different users can
see different branches.
4) Reachability check performance isn't affected by any state in a
RevWalk or ObjectWalk.
I don't yet know if a single algorithm will work for all cases in #2
and #3. We may need to evolve the ReachabilityChecker interfaces
over time to solve the Gerrit branch permissions case, or use
Gerrit-specific identity information to solve that in an efficient
way.
This change takes the existing public API and moves it to the
ObjectReader/whole repository level, which is where we can do
consistent customizations for #2 and #3. We intend to upstream the
best of whatever works, but anticipate the need for multiple rounds
of experimentation.
Change-Id: I9185feff43551fb387957c436112d5250486833d
Signed-off-by: Terry Parker <tparker@google.com>
Different archive formats support a compression level in the range
[0-9]. The value 0 is for lowest compressions and 9 for highest. Highest
levels produce output files of smaller sizes but require more memory to
do the compression.
This change allows passing a "compression-level" option to the git
archive command and implements using it for different file formats.
Change-Id: I5758f691c37ba630dbac24db67bb7da827bbc8e1
Signed-off-by: Youssef Elghareeb <ghareeb@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* changes:
Compare getting all refs except specific refs with seek and with filter
Add getsRefsByPrefixWithSkips (excluding prefixes) to ReftableDatabase
Add seekPastPrefix method to RefCursor
We sometimes want to get all the refs except specific prefixes,
similarly to getRefsByPrefix that gets all the refs of a specific
prefix.
We now create a new method that gets all refs matching a prefix except a
set of specific prefixes.
One use-case is for Gerrit to be able to get all the refs except
refs/changes; in Gerrit we often have lots of refs/changes, but very
little other refs. Currently, to get all the refs except refs/changes we
need to get all the refs and then filter the refs/changes, which is very
inefficient. With this method, we can simply skip the unneeded prefix so
that we don't have to go over all the elements.
RefDirectory still uses the inefficient implementation, since there
isn't a simple way to use Refcursor to achieve the efficient
implementation (as done in ReftableDatabase).
Signed-off-by: Gal Paikin <paiking@google.com>
Change-Id: I8c5db581acdeb6698e3d3a2abde8da32f70c854c
This method will be used by the follow-up change. This useful if we want
to go over all the changes after a specific ref.
For example, the new method allows us to create a follow-up that would
go over all the refs until we reach a specific ref (e.g refs/changes/),
and then we use seekPastPrefix(refs/changes/) to read the rest of the refs,
thus basically we return all refs except a specific prefix.
When seeking past a prefix, the previous condition that created the
RefCursor still applies. E.g, if the cursor was created by
seekRefsWithPrefix, we can skip some refs but we will not return refs
that are not starting with this prefix.
Signed-off-by: Gal Paikin <paiking@google.com>
Change-Id: I2c02e89c877fe90da8619cb8a4a9a0c865f238ef
Heap always copied whole blocks, which leads to AIOOBEs. LocalFile
didn't overwrite the method and thus caused NPEs.
Change-Id: Ia37d4a875df9f25d4825e6bc95fed7f0dff42afb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (stateless protocol, simplified ACK handling,
delimiters, section headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. The SSH tests are much slower and much more
focused on the SSH protocol and SSH key handling. Factor out two
very simple cloning and pulling tests and make those run with
protocol V2.
Bug: 553083
Change-Id: I357c7f5daa7efb2872f1c64ee6f6d54229031ae1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If a file exists in head, merge, and the working tree, but not in
the index, and we're doing a force checkout, the checkout must be
an "update", not a "keep".
This is a follow-up on If3a9b9e60064459d187c7db04eb4471a72c6cece.
Bug: 569962
Change-Id: I59a7ac41898ddc1dd90e86b09b621a41fdf45667
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
We want complete control over clone behavior and don't want to use
Object's clone implementation.
Change-Id: I34a4e967f8aa3879c69a4978768bd35712c4105c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Path#getFileName can return null. Fix the warning by asserting the file
name isn't null.
Change-Id: I7f2fe75b46113d8be1d14e3f18dd77da27df25ed
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File#listFiles can return null. Use Files#list instead to fix the
problem.
Change-Id: I74e0b49aa6dae370219507c64aa43be4d8aa7b82
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Path#getParent can return null. Fix the warning by implementing a helper
method which asserts the parent is not null.
Change-Id: Ib4f8dff0674b74bc891f15f08bd9755c5ea728dc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File#listFiles can return null, assert it is not null to fix the
warning.
Change-Id: I28fc668fee760d39965e6e039003ac9f85fd461b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This was experimental code and never used in production.
Change-Id: Ia3da7f2b82d9e365cec2ccf9397cbc47439cd150
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Some clients may wish to allow NO_CHANGE lightweight tag updates
without setting the force flag. (For instance EGit does so.)
Command-line git does not allow this.
Propagate the RefUpdate result via the RefAlreadyExistsException.
That way a client has the possibility to catch it and check the
failure reason without having to parse the exception message, and
take appropriate action, like ignoring the exception on NO_CHANGE.
Change-Id: I60e7a15a3c309db4106cab87847a19b6d24866f6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
JGit treated a NO_CHANGE RefUpdate as an error in all cases. But when
updating a lightweight tag, this is a successful result if -f was
specified.
Change-Id: Iddfa6d6a6dc8bf8fed81138a008ebc32d5f960bd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add the two config constants from C git that can switch on signing
of annotated tags. Add them to the GpgConfig, and implement actually
signing a tag in TagCommand.
The interactions between command line options for "git tag" and config
options is a bit murky in C git. There are two config settings for it:
* tag.gpgSign is the main option, if set to true, it kicks in if
neither -s nor -u are given on the command line.
* tag.forceSignAnnotated signs only tags created via "git tag -m",
but only if command-line option "-a" is not present. It applies
even if tag.gpgSign is set explicitly to false.
Giving -s or -u on the command line also forces an annotated tag
since lightweight tags cannot be signed.
Bug: 386908
Change-Id: Ic8a1a44b5f12f47d5cdf3aae2456c1f6ca9ef057
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Factor out a common ObjectBuilder as super class of CommitBuilder
and TagBuilder, and make the GpgSigner work on ObjectBuilder.
In order not to break API, add the new method for signing an
ObjectBuilder in a new interface GpgObjectSigner.
The signature for a tag is just tacked onto the end of the tag
message. The message of a signed tag must end in LF.
Bug: 386908
Change-Id: I5e021e3c927f4051825cd7355b129113b949455e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Observed the error when trying to force checkout from a branch
that had no changes on it. When the 'keep()' method from 'DirCacheCheckout'
method was called the 'DirCacheEntry e' was null and was passed like
this to the 'checkoutEntry()' method where the 'getObjectId()' is
being called on the 'e' object
Change-Id: If3a9b9e60064459d187c7db04eb4471a72c6cece
Explicitly test that END and DELIM can be distinguished. If not, the
wire protocol V2 breaks down.
Bug: 568950
Change-Id: I5f3496168244303c68893f1c756831dd27440aeb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This would allow other JGit users to access and reuse the constants.
Change-Id: I1608802f45586af5f8582afa592e26679e9cebe3
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It seems Eclipse 4.18 reports them as error whereas earlier versions
ignored this maybe since we don't require javadoc comments for all the
test bundles.
Change-Id: I3f4d42ce681ea5c2b4b302991d2641290ac8561d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A SymbolicRef is added to the advertised refs for any symref in
capabilities whose target is an advertised ref; this may replace an
existing entry, such as HEAD.
When cloning, if any advertised HEAD is symbolic then use the target
rather than looking for an advertised ref with a matching objectId.
Add --symref option to LsRemote command.
Bug: 514052
Change-Id: Idfb48e6f6e8dcfe57a6896883fe6d84d533aa9d0
Signed-off-by: Lee Worrall <worrall.la@gmail.com>
If pack or index files are guarded by a pack lock (.keep file)
deleteOrphans() should not touch the respective files protected by the
lock file. Otherwise it may interfere with PackInserter concurrently
inserting a new pack file and its index.
The problem was caused by the following race.
All mentioned files are located in "objects/pack/".
File endings relevant in "pack" dir:
.pack
.keep
.idx
.bitmap
When ReceivePack receives a pack file it executes the following steps:
ReceivePack.service():
receivePackAndCheckConnectivity():
receivePack():
receive the pack
parse the pack, returns packLock (.keep file)
PackInserter.flush():
write tmpPck file: "insert_<random>.pack"
write tmpIdx file: "insert_<random>.idx"
real pack name: "pack-<SHA1>.pack"
real index name: "pack-<SHA1>.idx"
atomic rename tmpPack to realPack
atomic rename tmpIdx to tmpIdx
execute commands
unlock pack by removing .keep file
trigger auto gc if enabled
When PackInserter.flush() renames the temporary pack to the final
"pack-xxx.pack" file the temporary pack index file "insert_xxx.idx"
has no matching .pack file with the same base name for a short interval.
If deleteOrphans() ran during that interval it deduced the pack index
file was orphaned. Subsequently the missing pack index caused
MissingObjectExceptions since objects contained in the pack couldn't be
looked up anymore.
Bug: https://bugs.chromium.org/p/gerrit/issues/detail?id=13544
Change-Id: I559c81e4b1d7c487f92a751bd78b987d32c98719
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Marija Savtchouk