We currently cannot use hamcrest 2.2 and assertj 3.20.2 (which requires
hamcrest 2.2) in egit tests since other Eclipse dependencies (e.g.
swtbot) require hamcrest 1.1.
Hence relax version range for these components in jgit so that jgit
tests also work when using the egit target platform.
Change-Id: I521e2ec4491bd8d790609b8a66a8f14511a865a1
and update
- assertj to 3.20.2.v20210706-1104
- hamcrest to 2.2.0.v20210711-0821
- classes which were in org.hamcrest.core 1.3 and org.hamcrest.library
1.3 were all moved to org.hamcrest in 2.2
- the annotation org.hamcrest.Factory was removed and is no longer
needed
- junit 4.13 requires hamcrest-core and hamcrest-library 1.3 therefore
keep them in the target platform
CQ: 23501
Change-Id: Ife871c0343b611be9203aed7f86577e85bbf5c95
Make the used KEX algorithms configurable via the ssh config. Also
implement adding algorithms not in the default set: since sshd 2.6.0
deprecated SHA1-based algorithms, it is possible that the default set
has not all available algorithms, so adding algorithms makes sense.
This enables users who have to use a git server that only supports
old SHA1-based key exchange methods to enable those methods in the
ssh config:
KexAlgorithms +diffie-hellman-group1-sha1
There are two more SHA1 algorithms that are not enabled by default:
diffie-hellman-group14-sha1 and diffie-hellman-group-exchange-sha1.
KeyAlgorithms accepts a comma-separated list of algorithm names.
Since adding algorithms is now supported, adapt the handling of
signature algorithms, too. Make sure that definitions for the KEX
exchange signature (HostKeyAlgorithms) don't conflict with the
definition for signatures for pubkey auth (PubkeyAcceptedAlgorithms).
HostKeyAlgorithms updates the signature factories set on the session
to include the default factories plus any that might have been added
via the SSH config. Move the handling of PubkeyAcceptedAlgorithms
from the client to the JGitPubkeyAuthentication, where it can be done
only if pubkey auth is attempted at all and where it can store its
adapted list of factories locally.
Bug: 574636
Change-Id: Ia5d5f174bbc8e5b41e10ec2c25216d861174e7c3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Update
- com.google.gson to 2.8.7.v20210624-1215
- javaewah to 1.1.12.v20210622-2206
- org.apache.sshd.osgi to 2.7.0.v20210623-0618
- org.apache.sshd.sftp to 2.7.0.v20210623-0618
- org.tukaani.xz to 1.9.0.v20210624-1259
- Apache MINA sshd to 2.7.0
- Remove work-arounds for problems resolved upstream since 2.6.0, and
adapt to upstream API changes.
- update DEPENDENCIES.
CQ: 23469
CQ: 23470
CQ: 23496
CQ: 23497
CQ: 23498
Bug: 574220
Change-Id: I898b216c3492f8488fbf25fa4b49f1250f86f3c8
Also-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.11:
Refactor CommitCommand to improve readability
CommitCommand: fix formatting
CommitCommand: remove unncessary comment
Ensure post-commit hook is called after index lock was released
sshd: try all configured signature algorithms for a key
sshd: modernize ssh config file parsing
sshd: implement ssh config PubkeyAcceptedAlgorithms
Change-Id: Ic3235ffd84c9d7537a1fe5ff4f216578e6e26724
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
For RSA keys, there may be several configured signature algorithms:
rsa-sha2-512, rsa-sha2-256, and ssh-rsa. Upstream sshd has bug
SSHD-1105 [1] and always and unconditionally uses only the first
configured algorithm. With the default order, this means that it cannot
connect to a server that knows only ssh-rsa, like for instance Apache
MINA sshd servers older than 2.6.0.
This affects for instance bitbucket.org or also AWS Code Commit.
Re-introduce our own pubkey authenticator that fixes this.
Note that a server may impose a penalty (back-off delay) for subsequent
authentication attempts with signature algorithms unknown to the server.
In such cases, users can re-order the signature algorithm list via the
PubkeyAcceptedAlgorithms (formerly PubkeyAcceptedKeyTypes) ssh config.
[1] https://issues.apache.org/jira/browse/SSHD-1105
Bug: 572056
Change-Id: I7fb9c759ab6532e5f3b6524e9084085ddb2f30d6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Apache MINA sshd 2.6.0 appears to use only the first appropriate
public key signature algorithm for a particular key. See [1]. For
RSA keys, that is rsa-sha2-512. This breaks authentication at servers
that only know the older (and deprecated) ssh-rsa algorithm.
With PubkeyAcceptedAlgorithms, users can re-order algorithms in
the ssh config file per host, if needed. Setting
PubkeyAcceptedAlgorithms ^ssh-rsa
will put "ssh-rsa" at the front of the list of algorithms, and then
authentication at such servers with RSA keys works again.
[1] https://issues.apache.org/jira/browse/SSHD-1105
Bug: 572056
Change-Id: I86c3b93f05960c68936e80642965815926bb2532
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Re-enable DSA, DSA_CERT, and RSA_CERT public key authentication.
DSA is discouraged for a long time already, but it might still be
way too disruptive to completely drop it. RSA is discouraged for
far less long, and dropping that would be really disruptive.
Adapt to the changed property handling. Remove work-arounds for
shortcomings of earlier sshd versions.
Use Orbit I20210203173513, which includes sshd 2.6.0. This also bumps
apache.httpclient to 4.5.13 and apache.httpcore to 4.4.14.
Change-Id: I2d24a1ce4cc9f616a94bb5c4bdaedbf20dc6638e
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (stateless protocol, simplified ACK handling,
delimiters, section headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. The SSH tests are much slower and much more
focused on the SSH protocol and SSH key handling. Factor out two
very simple cloning and pulling tests and make those run with
protocol V2.
Bug: 553083
Change-Id: I357c7f5daa7efb2872f1c64ee6f6d54229031ae1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
It seems Eclipse 4.18 reports them as error whereas earlier versions
ignored this maybe since we don't require javadoc comments for all the
test bundles.
Change-Id: I3f4d42ce681ea5c2b4b302991d2641290ac8561d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This reverts commit f802f06e7f.
I had misunderstood how protocol V2 works. This implementation only
works if the negotiation during fetch is done in one round.
Fixing this is substantial work in BasePackFetchConnection. Basically
I think I'd have to change back negotiate to the V0 version, and have
a doFetch() that does
if protocol V2
doFetchV2()
else
doFetchV0()
with doFetchV0 the old code, and doFetchV2 completely new.
Plus there would need to be a HTTP test case requiring several
negotiation rounds.
This is a couple of days work at least, and I don't know when I will
have the time to revisit this. So although the rest of the code is
fine I prefer to back this out completely and not leave a only half
working implementation in the code for an indeterminate time.
Bug: 553083
Change-Id: Icbbbb09882b3b83f9897deac4a06d5f8dc99d84e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (simplified ACK handling, delimiters, section
headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. Do the same for the SSH transport tests.
Bug: 553083
Change-Id: Ice9866aa78020f5ca8f397cde84dc224bf5d41b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This is useful to access git repositories behind a bastion server
(jump host).
Add a constant for the config; rewrite the whole connection initiation
to parse the value and (recursively) set up the chain of hops. Add
tests for a single hop and two different ways to configure a two-hop
chain.
The connection timeout applies to each hop in the chain individually.
Change-Id: Idd25af95aa2ec5367404587e4e530b0663c03665
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When exceptions occur very early in the SSH connection setup, it's
possible that an exception gets lost. A subsequent authentication
attempt may then never be notified of the failure, and then wait
indefinitely or until its timeout expires.
This is caused by race conditions in sshd. The issue has been reported
upstream as SSHD-1050,[1] but will be fixed at the earliest in sshd
2.6.0.
[1] https://issues.apache.org/jira/projects/SSHD/issues/SSHD-1050
Bug: 565394
Change-Id: If9b62839db38f9e59a5e1137c2257039ba82de98
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Improve the SshTestGitServer API for accessing the server properties.
Instead of returning the raw property map, return the proper sshd API
abstraction PropertyResolver.
This makes the interface more resilient against upstream changes.
Change-Id: Ie5b685bddc4e59f3eb6c121026d3658d57618ca4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
SSHD-1028:[1] server doesn't close server-side sessions properly when
client disconnects.
[1] https://issues.apache.org/jira/projects/SSHD/issues/SSHD-1028
Change-Id: I0d67f49e35abe8375cb1370a494dc01d0fb2c9b1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Motivation: JSch serves as 'default' implementations of the SSH
transport. If a client application does not use it then there is no need
to pull in this dependency.
Move the classes depending on JSch to an OSGi fragment extending the
org.eclipse.jgit bundle and keep them in the same package as before
since moving them to another package would break API. Defer moving them
to a separate package to the next major release.
Add a new feature org.eclipse.jgit.ssh.jsch feature to enable
installation. With that users can now decide which of the ssh client
integrations (JCraft JSch or Apache Mina SSHD) they want to install.
We will remove the JCraft JSch integration in a later step due to the
reasons discussed in bug 520927.
Bug: 553625
Change-Id: I5979c8a9dbbe878a2e8ac0fbfde7230059d74dc2
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Avoid using a key written to a file. This makes it clearer that
the test does not rely on files being present.
Change-Id: I31cf4f404aab5b891c32fc4bda906b7f8fe03777
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
A builder API provides a more convenient way to define a customized
SshdSessionFactory by hiding the subclassing.
Also provide a new interface SshConfigStore to abstract away the
specifics of reading a ssh config file, and provide a way to customize
the concrete ssh config implementation to be used. This facilitates
using an alternate ssh config implementation that may or may not be
based on files.
Change-Id: Ib9038e8ff2a4eb3a9ce7b3554d1450befec8e1e1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change target platforms to Orbit I20200319180910 and regenerate them.
Change package imports to [2.4.0,2.5.0); adapt code to upstream API
changes.
Maven build: update version in root pom.
Bazel build: update version & hash in WORKSPACE file.
Proxy functionality verified manually using 3proxy (HTTP & SOCKS,
with basic authentication) and ssh -vvv -D7020 localhost (SOCKS, no
authentication).
Bug: 561078
Change-Id: I582f6b98055b013c006f2c749890fe6db801cbaa
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Since version 4.13 JUnit has an assertThrows method. Remove the
implementation in MoreAsserts and use the one from JUnit.
CQ: 21439
Change-Id: I086baa94aa3069cebe87c4cbf91ed1534523c6cb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since [1] the gerrit project includes jgit as a submodule, and has this
warning enabled, resulting in 100s of warnings in the console.
Also enable the warning here, and fix them.
At the same time, add missing braces around adjacent and nearby one-line
blocks.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/227897
Change-Id: I81df3fc7ed6eedf6874ce1a3bedfa727a1897e4c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Add the constant, and implement hashing of known host names in
OpenSshServerKeyDatabase. Add a test verifying that the hashing
works.
Bug: 548492
Change-Id: Iabe82b666da627bd7f4d82519a366d166aa9ddd4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Provide a wrapper interface and change the implementation such that
a client can substitute its own database of known hosts keys instead
of the default file-based mechanism.
Bug: 547619
Change-Id: Ifc25a4519fa5bcf7bb8541b9f3e2de15215e3d66
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Matthias Sohn