The intent with the setCompressionLevel and checkExisting methods (which
are already public) is for callers to be able to call them, but they
can't do that if the class itself is not public.
Change-Id: I014044fec3bfa1d33775500345efd60eb5d45bde
When interleaving reads and writes from an unflushed pack, we forgot to
reset the file pointer back to the end of the file before writing more
new objects. This had at least two unfortunate effects:
* The pack data was potentially corrupt, since we could overwrite
previous portions of the file willy-nilly.
* The CountingOutputStream would report more bytes read than the size
of the file, which stored the wrong PackedObjectInfo, which would
cause EOFs during reading.
We already had a test in PackInserterTest which was supposed to catch
bugs like this, by interleaving reads and writes. Unfortunately, it
didn't catch the bug, since as an implementation detail we always read a
full buffer's worth of data from the file when inflating during
readback. If the size of the file was less than the offset of the object
we were reading back plus one buffer (8192 bytes), we would completely
accidentally end up back in the right place in the file.
So, add another test for this case where we read back a small object
positioned before a large object. Before the fix, this test exhibited
exactly the "Unexpected EOF" error reported at crbug.com/gerrit/7668.
Change-Id: I74f08f3d5d9046781d59e5bd7c84916ff8225c3b
When we are cloning we have no refs at all yet, and there cannot
(or at least should not) be any other thread doing something with
refs yet.
Locking loose refs is thus not needed, since there are no loose
refs yet and nothing should be trying to create them concurrently.
Let's skip the whole loose ref locking when we are cloning a repository.
As a result, JGit will write the refs directly to the packed-refs
file, and will not create the refs/remotes/ directories nor the
lock files underneath when cloning and packed refs are used. Since
no lock files are created, any problems on case-insensitive file
systems with tag or branch names that differ only in case are avoided
during cloning.
Detect if we are cloning based on the following heuristics:
* HEAD is a dangling symref
* There is no loose ref
* There is no packed-refs file
Note, however, that there may still be problems with such tag or
branch names later on. This is primarily a five-minutes-past-twelve
stop-gap measure to resolve the referenced bug, which affects the
Oxygen.2 release.
Bug: 528497
Change-Id: I57860c29c210568165276a123b855e462b6a107a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review.
This was fixed on master [1] by making "readIncludedConfig" a noop
by default. This allows only FileBasedConfig, which originated from
local disk, to read local system paths.
However, the "readIncludedConfig" method was only introduced in [2]
which was needed by [3], both of which are only on the master branch.
On the stable branch only Config supports includes. Therefore this
commit simply disables the include functionality.
[1] https://git.eclipse.org/r/#/c/113371/
[2] https://git.eclipse.org/r/#/c/111847/
[3] https://git.eclipse.org/r/#/c/111848/
Bug: 528781
Change-Id: I9a3be3f1d07c4b6772bff535a2556e699a61381c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
FindBugs reports:
This class is an inner class, but does not use its embedded reference
to the object which created it. This reference makes the instances
of the class larger, and may keep the reference to the creator object
alive longer than necessary. If possible, the class should be made
static.
Change-Id: I9f49de32b4cd81b7ef1239b390353689263bf66e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If some process executed by FS#readPipe lived for a while after
closing stderr, FS#GobblerThread#run failed with an
IllegalThreadStateException exception when accessing p.exitValue()
for the process which is still alive.
Add Process#waitFor calls to wait for the process completion.
Bug: 528335
Change-Id: I87e0b6f9ad0b995dbce46ddfb877e33eaf3ae5a6
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The message is formatted as:
Invalid pathInfo '/abc' does not match '/{SHA-256}'
but should be:
Invalid pathInfo: '/abc' does not match '/{SHA-256}'
(i.e. including a colon) to be consistent with other messages.
Change-Id: Ic38aa7d33dd02d7954b95c331a73919a90c69991
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The message is formatted as:
Invalid id: : abcde...
but should be:
Invalid id: abcde...
Change-Id: Ie15cacdcf2f168edaee262e6cf8061ebfe9d998d
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Pretty printing the response is useful for human readers, but most
(if not all) of the time, the response will be read by programs.
Remove it to avoid the additional overhead of the formatting and
extra bytes in the response. Adjust the test accordingly.
Note that LfsProtocolServlet already doesn't use pretty printing,
so this change makes FileLfsServlet's behavior consistent. In fact,
both classes now have duplicate Gson handling; this will be cleaned
up in a separate change.
Change-Id: I113a23403f9222f16e2c0ddf39461398b721d064
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
FindBugs reports:
This class is an inner class, but does not use its embedded reference
to the object which created it. This reference makes the instances
of the class larger, and may keep the reference to the creator object
alive longer than necessary. If possible, the class should be made
static.
Change-Id: I245e44678166176de0cfb275e22ddd159f88e0bd
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This was silenced before but suppression was unintentionally lost in
merge commit 6858339c1e.
This method was removed in 4.9.0 and reintroduced in 4.9.1 to avoid
breaking EMF compare versions which were built against older versions.
See: abf420302b
Change-Id: I152d58ac885e044bcab682b9423f6cc83b667989
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a GC operation is interrupted, temporary packs and indexes can be
left on the pack folder. In big, busy repositories this can lead to
significant amounts of wasted disk space if this interruption is done
with a certain frequency.
Remove stale temporary packs and indexes at the end of the GC process so
they do not accumulate. To avoid interfering with a possible concurrent
JGit GC process in the same repository, only delete temporary files that
are older than one day.
Change-Id: If9b6c1e57fac8a6a0ecc0a703089634caba4caae
Signed-off-by: Hector Caballero <hector.caballero@ericsson.com>
- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When running on NFS there was a chance that JGits LockFile
semantic is broken because File#createNewFile() may allow
multiple clients to create the same file in parallel. This
change provides a fix which is only used when the new config
option core.supportsAtomicCreateNewFile is set to false. The
default for this option is true. This option can only be set in the
global or the system config file. The repository config file is not
taken into account in this case.
If the config option core.supportsAtomicCreateNewFile is true
then File#createNewFile() is trusted and the behaviour doesn't
change.
But if core.supportsAtomicCreateNewFile is set to false then after
successful creation of the lock file a hardlink to that lock file is
created and the attribute nlink of the lock file is checked to be 2. If
multiple clients manage to create the same lock file nlink would be
greater than 2 showing the error.
This expensive workaround is described in
https://www.time-travellers.org/shane/papers/NFS_considered_harmful.html
section III.d) "Exclusive File Creation"
Change-Id: I3d2cc48d8eb280d5f7039eb94da37804f903be6a
Then list of packed refs was cached in RefDirectory based on mtime of
the packed-refs file. This may fail on NFS when attributes are cached.
A cached mtime of the packed-refs file could cause JGit to trust the
cached content of this file and to overlook that the file is modified.
Honor the config option trustFolderStats and always read the packed-refs
content if the option is false. By default this option is set to true
and this fix is not active.
Change-Id: I2b65cfaa8f4aba2efbf8a5e865d3f09f927e2eec
Jsch 0.1.54 passes on the values from ~/.ssh/config for
"ServerAliveInterval" and "ConnectTimeout" as read from
the config file to java.net.Socket.setSoTimeout(). That
method expects milliseconds, but the values in the config
file are seconds!
The missing conversion in Jsch means that the timeout is
set way too low, and if the server doesn't respond within
that very short time frame, Jsch kills the connection and
then throws an exception with a message such as "session is
down" or "timeout in waiting for rekeying process".
As a work-around, do the conversion to milliseconds in the
Jsch-facing Config interface of OpenSshConfig. That way Jsch
already gets these values as milliseconds.
Bug: 526867
Change-Id: Ibc9b93f7722fffe10f3e770dfe7fdabfb3b97e74
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Args4J does no longer allow to use final fields to reference
arguments or options [1]. Change RevParse to be compatibel with this
change.
[1] 6e11f89d40
See-also: a0558b7094
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Change-Id: I33b233f195c06855d9e094c8c9ba804fbe7b1438
JSch unconditionally overrides the user name given in the connection
URI by the one found in ~/.ssh/config (if that does specify one for
the used host). If the SSH config file has a different user name,
we'll end up using the wrong name, which typically results in an
authentication failure or in Eclipse/EGit asking for a password for
the wrong user.
Unfortunately there is no way to prevent or circumvent this Jsch
behavior up front; it occurs already in the Session constructor at
com.jcraft.jsch.Session() and the Session.applyConfig() method. And
while there is a Session.setUserName() that would enable us to correct
this, that latter method has package visibility only.
So resort to reflection to invoke that setUserName() method to ensure
that Jsch uses the user name from the URI, if there is one.
Bug: 526778
Change-Id: Ia327099b5210a037380b2750a7fd76ff25c41a5a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Applications that use ObjectInserters to create lots of individual
objects may prefer to avoid cluttering up the object directory with
loose objects. Add a specialized inserter implementation that produces a
single pack file no matter how many objects. This inserter is loosely
based on the existing DfsInserter implementation, but is simpler since
we don't need to buffer blocks in memory before writing to storage.
An alternative for such applications would be to write out the loose
objects and then repack just those objects later. This operation is not
currently supported with the GC class, which always repacks existing
packs when compacting loose objects. This in turn requires more
CPU-intensive reachability checks and extra I/O to copy objects from old
packs to new packs.
So, the choice was between implementing a new variant of repack, or not
writing loose objects in the first place. The latter approach is likely
less code overall, and avoids unnecessary I/O at runtime.
The current implementation does not yet support newReader() for reading
back objects.
Change-Id: I2074418f4e65853b7113de5eaced3a6b037d1a17
GC explicitly handles the case where a new pack has the same name as an
existing pack due to it containing the exact same set of objects. In
this case, the pack passed to insertPack will have the same name as an
existing pack, but it will also almost certainly have a later mtime than
the existing pack.
The loop in insertPack tried to short-circuit when inserting a new pack,
to avoid walking more of the pack list than necessary. Unfortunately,
this means it will never get to the check for an identical name,
resulting in a duplicate entry for the same PackFile in the pack list.
Remove the short-circuit so that insertPack does not insert a duplicate
entry.
Change-Id: I00711b28594622ad3bd104332334e8a3592cda7f
So far we follow OSGi semantic versioning [1] which says the following:
"A change in the second (minor) part of the version signals that the
change is backward compatible with consumers of the API package but not
with the providers of that API. That is, when the API package goes from
version 1.5 to 1.6 it is no longer compatible with a provider of that
API but consumers of that API are backward compatible with that API
package."
The change Ib5fbf17bdaf727bc5d0e106ce88f2620d9f87a6f broke EMF Compare
which subclasses ResolveMerger since we added a new parameter to the
protected ResolveMerger.processEntry() method. According to the above
cited OSGi semantic versioning this is ok, implementers should expect
that they break on minor version changes of the API they implement.
This change reintroduces the old processEntry() method in order to help
avoid breakage for existing EMF Compare versions which expect breakage
also for the implementer case only for major version change (in this
case from JGit 4.x to 5.x).
[1] http://www.osgi.org/wp-content/uploads/SemanticVersioning1.pdf
See: https://dev.eclipse.org/mhonarc/lists/jgit-dev/msg03431.html
Change-Id: I48ba4308dee73925fa32d6c2fd6b5fd89632c571
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Round first, then calculate the labels. This avoids "x years, 12 months"
and instead produces "x+1 years".
One test case has been added for the original example the bug was found
with, and one assertion has been moved from an existing test case to the
new test case, since it also triggered the bug.
Bug: 525907
Change-Id: I3270af3850c4fb7bae9123a0a6582f93055c9780
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Do tilde replacement for values from the ssh config file that are
file names in all cases to make sure that they are already replaced
when Jsch tries to get the values.
Previously, OpenSshConfig did tilde replacement only for the
IdentityFile in the JGit-facing "Host" interface and left the
replacement in the Jsch-facing "Config" interface to Jsch.
But on Windows the JGit notion of what should be used to replace the
tilde differs from Jsch's replacement. Jsch always replaces the tilde
by the value of the system property "user.home", whereas JGit also
considers some environment variables like %HOME%. This can lead to
rather surprising failures as in the case of bug 526175 where
%HOME% != user.home.
Prior to commit 9d24470 (i.e.,prior to JGit 4.9.0) this problem never
occurred because Jsch was completely unaware of the ssh config file
and all host and IdentityFile handling happened exclusively in JGit.
Bug: 526175
Change-Id: I1511699664ffea07cb58ed751cfdb79b15e3a99e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Shadow commits in the RevWalk in the UploadPack object may cause the
UNINTERESTING flag not being carried over to their parents commits since
they were marked NO_PARENTS during the assumeShallow or
initializeShallowCommits call.
A new RevWalk needs to be created for this reason, but instead of
creating a new RevWalk from Repository, we can reuse the ObjectReader in
the RevWalk of UploadPack to load objects.
Change-Id: Ic3fee0512d35b4f555c60e696a880f8b192e4439
Signed-off-by: Zhen Chen <czhen@google.com>
Checkout sometimes throws an exception, and
other times it writes an error message to outw
and returns normally, even though the command
failed. This commit now reports all failures
through a die() exception.
Change-Id: I038a5d976d95020fea3faac68e9178f923c25b28
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
Dave Borowitz