Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (stateless protocol, simplified ACK handling,
delimiters, section headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. The SSH tests are much slower and much more
focused on the SSH protocol and SSH key handling. Factor out two
very simple cloning and pulling tests and make those run with
protocol V2.
Bug: 553083
Change-Id: I357c7f5daa7efb2872f1c64ee6f6d54229031ae1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
On Android, the co-variant override of ConcurrentHashMap.keySet()
introduced in Java 8 was undone. [1] If compiled Java code calls that
co-variant override directly, one gets a NoSuchMethodError exception
at run-time on Android.
Making the code call that method via Map.keySet() side-steps this
problem.
This is similar to bug 496262, where the same problem cropped up when
compiling with Java 8 against a Java 7 target, but here we cannot use
bootclasspath. We build against Java 8, not against the Android version
of it.
Recent Android versions should have some bytecode "magic" that adds the
co-variant override in bytecode (see the commit referenced in [1]), but
on older Android version this problem may still occur. (Or perhaps the
"magic" is ineffective...) There are two pull requests on Github for
this problem, both from 2020, [2][3] while the Android commit [1] is
from March 2018. Apparently people still occasionally run into this
problem in the wild.
[1] 0e8b937ded/ojluni/src/main/java/java/util/concurrent/ConcurrentHashMap.java (1244)
[2] https://github.com/eclipse/jgit/pull/104
[3] https://github.com/eclipse/jgit/pull/100
Change-Id: I7c07e0cc59871cb7fe60795e22867827fa9c2458
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If a file exists in head, merge, and the working tree, but not in
the index, and we're doing a force checkout, the checkout must be
an "update", not a "keep".
This is a follow-up on If3a9b9e60064459d187c7db04eb4471a72c6cece.
Bug: 569962
Change-Id: I59a7ac41898ddc1dd90e86b09b621a41fdf45667
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This fixes two warnings of type LI_LAZY_INIT_STATIC.
Change-Id: I26a7a48aed9d0a0547e908a56b7014a7620fadd8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use a dedicated Lock object to lock the scheduler in
RepositoryCache#configureEviction to fix spotbugs warning
JLM_JSR166_UTILCONCURRENT_MONITORENTER.
Change-Id: I003dcf0ed1a0a3f4eea5d8a2f51a07473d28a928
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Path#getParent can return null, return fallback filestore attributes in
that case.
Change-Id: Ic09484d527bc87b27964b625e07373b82412f2da
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes spotbugs warning NP_EQUALS_SHOULD_HANDLE_NULL_ARGUMENT.
This implementation violated the contract defined by
java.lang.Object.equals() because it did not check for null being passed
as the argument. All equals() methods should return false if passed a
null value.
Change-Id: I607f6979613d390aae2f3546b587f63133d6d73c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes UL_UNRELEASED_LOCK_EXCEPTION_PATH raised by spotbugs in
#compactFully.
Change-Id: I370578ad9a027c5c9709d60a1dfafdac0cfca908
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes UL_UNRELEASED_LOCK_EXCEPTION_PATH raised by spotbugs in
#DfsReftableDatabase and #clearCache.
Change-Id: Ifd3189288d2a8e64139c02cd105eb335fa2f68cf
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also mark the return value @Nullable to enable null analysis in Eclipse.
Change-Id: I5b286d657d432f4b32afd4dd370f76892b115422
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This reverts commit 022b02dea1.
Removing this API warning filter was wrong since we intentionally
removed the config constant CONFIG_REFSTORAGE_REFTREE.
Change-Id: Ie068e539157cc2312efc8a07feabeb0dd2f75096
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File#list can return null. Fix the potential NPE by using Files#list
which is also faster since it retrieves directory entries lazily while
File#list retrieves them eagerly.
Change-Id: Idf4bda398861c647587e357326b8bc8b587a2584
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File#listFiles can return null. Use Files#list which does not return
null and should be faster since it's returning directory entries lazily
while File#listFiles fetches them eagerly.
Change-Id: I3bfe2a52278244fc469143692c06b05d9af0d0d4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If TransportException is thrown in the finally block of execute()
ensure that the exception handled in the previous catch block isn't
suppressed.
Change-Id: I670acdfb4d36e7a419a9a79ae9faab2e085a43ee
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If TransportException is thrown in the finally block of
downloadPackedObject() ensure that the exception handled in the previous
catch block isn't suppressed.
Change-Id: I23982a2b215e38f681cc1719788985e60232699a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This was experimental code and never used in production.
Change-Id: Ia3da7f2b82d9e365cec2ccf9397cbc47439cd150
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The ObjectDirectory class manages the interactions for the entire object
database, this includes loose objects, packfiles, alternates, and
shallow commits. To help reduce the complexity of this class, abstract
some of the loose object specific details into a class which understands
just this, leaving the ObjectDirectory to focus more on the interactions
between the different mechanisms.
Change-Id: I39f3a74d6308f042a2a2baa57769f4acde5ba5e0
Signed-off-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.9:
Fix stamping to produce stable file timestamps
Change-Id: Icd092cd9b883556fcbd115c17346a9d88dc172ce
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The ObjectDirectory class manages the interactions for the entire object
database, this includes loose objects, packfiles, alternates, and
shallow commits. To help reduce the complexity of this class, abstract
some of the packfile specific details into a class which understands
just this, leaving the ObjectDirectory to focus more on the interactions
between the different mechanisms.
Change-Id: I5cc87b964434b0afa860b3fe23867a77b3c3a4f2
Signed-off-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Some clients may wish to allow NO_CHANGE lightweight tag updates
without setting the force flag. (For instance EGit does so.)
Command-line git does not allow this.
Propagate the RefUpdate result via the RefAlreadyExistsException.
That way a client has the possibility to catch it and check the
failure reason without having to parse the exception message, and
take appropriate action, like ignoring the exception on NO_CHANGE.
Change-Id: I60e7a15a3c309db4106cab87847a19b6d24866f6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
JGit treated a NO_CHANGE RefUpdate as an error in all cases. But when
updating a lightweight tag, this is a successful result if -f was
specified.
Change-Id: Iddfa6d6a6dc8bf8fed81138a008ebc32d5f960bd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add the two config constants from C git that can switch on signing
of annotated tags. Add them to the GpgConfig, and implement actually
signing a tag in TagCommand.
The interactions between command line options for "git tag" and config
options is a bit murky in C git. There are two config settings for it:
* tag.gpgSign is the main option, if set to true, it kicks in if
neither -s nor -u are given on the command line.
* tag.forceSignAnnotated signs only tags created via "git tag -m",
but only if command-line option "-a" is not present. It applies
even if tag.gpgSign is set explicitly to false.
Giving -s or -u on the command line also forces an annotated tag
since lightweight tags cannot be signed.
Bug: 386908
Change-Id: Ic8a1a44b5f12f47d5cdf3aae2456c1f6ca9ef057
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Factor out a common ObjectBuilder as super class of CommitBuilder
and TagBuilder, and make the GpgSigner work on ObjectBuilder.
In order not to break API, add the new method for signing an
ObjectBuilder in a new interface GpgObjectSigner.
The signature for a tag is just tacked onto the end of the tag
message. The message of a signed tag must end in LF.
Bug: 386908
Change-Id: I5e021e3c927f4051825cd7355b129113b949455e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Observed the error when trying to force checkout from a branch
that had no changes on it. When the 'keep()' method from 'DirCacheCheckout'
method was called the 'DirCacheEntry e' was null and was passed like
this to the 'checkoutEntry()' method where the 'getObjectId()' is
being called on the 'e' object
Change-Id: If3a9b9e60064459d187c7db04eb4471a72c6cece
We are running several servers with jGit. We need to run repack from
time to time to keep the repos performant. I.e. after push we test how
many small packs are in the repo and when a threshold is reached we run
the repack.
After upgrading jGit version we've found that if someone does the clone
at the time repack is running the clone sometimes (not always) fails
because the repack removes .pack file used by the clone. Server
exception and client error attached.
I've tracked down the cause and it seems to be introduced between jGit
5.2 (which we upgraded from) and 5.3 and being caused by this commit:
Move throw of PackInvalidException outside the catch -
afef866a44
The problem is that when the throw was inside of the try block the last
catch block catched the exception and called openFailed(false) method.
It is true that it called it with invalidate = false, which is wrong.
The real problem though is that with the throw outside of the try block
the openFail is not called at all and the fields activeWindows and
activeCopyRawData are not set to 0. Which affects the later called tests
like: if (++activeCopyRawData == 1 && activeWindows == 0).
The fix for this is relatively simple keeping the throw outside of the
try block and still having the invalid field set to true. I did
exhaustive testing of the change running concurrent clones and pushes
indefinitely and with the patch applied it never fails while without the
patch it takes relatively short to get the error.
See: https://www.eclipse.org/lists/jgit-dev/msg04014.html
Bug: 569349
Change-Id: I9dbf8801c8d3131955ad7124f42b62095d96da54
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This would allow other JGit users to access and reuse the constants.
Change-Id: I1608802f45586af5f8582afa592e26679e9cebe3
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A SymbolicRef is added to the advertised refs for any symref in
capabilities whose target is an advertised ref; this may replace an
existing entry, such as HEAD.
When cloning, if any advertised HEAD is symbolic then use the target
rather than looking for an advertised ref with a matching objectId.
Add --symref option to LsRemote command.
Bug: 514052
Change-Id: Idfb48e6f6e8dcfe57a6896883fe6d84d533aa9d0
Signed-off-by: Lee Worrall <worrall.la@gmail.com>
- log an error
- either there is no list or it is incomplete hence return immediately
Change-Id: Ieee5378ca06304056b9ccc30c1acd5f52360052d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If pack or index files are guarded by a pack lock (.keep file)
deleteOrphans() should not touch the respective files protected by the
lock file. Otherwise it may interfere with PackInserter concurrently
inserting a new pack file and its index.
The problem was caused by the following race.
All mentioned files are located in "objects/pack/".
File endings relevant in "pack" dir:
.pack
.keep
.idx
.bitmap
When ReceivePack receives a pack file it executes the following steps:
ReceivePack.service():
receivePackAndCheckConnectivity():
receivePack():
receive the pack
parse the pack, returns packLock (.keep file)
PackInserter.flush():
write tmpPck file: "insert_<random>.pack"
write tmpIdx file: "insert_<random>.idx"
real pack name: "pack-<SHA1>.pack"
real index name: "pack-<SHA1>.idx"
atomic rename tmpPack to realPack
atomic rename tmpIdx to tmpIdx
execute commands
unlock pack by removing .keep file
trigger auto gc if enabled
When PackInserter.flush() renames the temporary pack to the final
"pack-xxx.pack" file the temporary pack index file "insert_xxx.idx"
has no matching .pack file with the same base name for a short interval.
If deleteOrphans() ran during that interval it deduced the pack index
file was orphaned. Subsequently the missing pack index caused
MissingObjectExceptions since objects contained in the pack couldn't be
looked up anymore.
Bug: https://bugs.chromium.org/p/gerrit/issues/detail?id=13544
Change-Id: I559c81e4b1d7c487f92a751bd78b987d32c98719
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Just allocate the two string objects directly. The previously used
new StringBuilder(0).toString() returns the same object for both END
and DELIM when run on Java 15, which breaks the wire protocol since
then END and DELIM cannot be distinguished anymore.
Bug: 568950
Change-Id: I9d54d7bf484948c24b51a094256bd9d38b085f35
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
(cherry picked from commit 7da0f0a8f3)
Just allocate the two string objects directly. The previously used
new StringBuilder(0).toString() returns the same object for both END
and DELIM when run on Java 15, which breaks the wire protocol since
then END and DELIM cannot be distinguished anymore.
Bug: 568950
Change-Id: I9d54d7bf484948c24b51a094256bd9d38b085f35
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
(cherry picked from commit 7da0f0a8f3)
Just allocate the two string objects directly. The previously used
new StringBuilder(0).toString() returns the same object for both END
and DELIM when run on Java 15, which breaks the wire protocol since
then END and DELIM cannot be distinguished anymore.
Bug: 568950
Change-Id: I9d54d7bf484948c24b51a094256bd9d38b085f35
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
DirCacheEditor unconditionally applied a PathEdit to all stages in the
index. This gives wrong results if one wants to check out a file from
some commit to resolve a conflict: JGit would update the working tree
file multiple times (once per stage), and set all stages to point to
the checked-out blob.
C git replaces the stages by the entry for the checked-out file.
To support this, add a DirCacheEntry.setStage() method so that
CheckoutCommand can force the stage to zero. In DirCacheEditor, keep
only the zero stage if the PathEdit re-set the stage.
Bug: 568038
Change-Id: Ic7c635bb5aaa06ffaaeed50bc5e45702c56fc6d1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Due to Java bug JDK-8220793 [1] Java cannot set timestamps of a symlink
but only of the symlink target. This bug was fixed in Java 13. Since we
don't have a use case to set the timestamp of the symlink itself simply
document the current behavior of setLastModified methods.
[1] https://bugs.openjdk.java.net/browse/JDK-8220793
Change-Id: Ibc28c1702a1b9845602bd257606fbd44803a43fb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
PerformanceLogContext threw NullPointerException when multiple threads
tried to add an event to the PerformanceLogContext. The cause for this
is that the ThreadLocal was initialized only in the class constructor
for the first thread; for subsequent threads it was null.
To fix this initialize eventRecords for each thread.
Change-Id: I18ef67dff8f0488e3ad28c9bbc18ce73d5168cf9
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix IOException occurring when calling
GC on a repository with absent objects/pack folder.
Change-Id: I5be1333a0726f4d7491afd25ddac85451686c30a
Signed-off-by: Nail Samatov <sanail@yandex.ru>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This reverts commit f802f06e7f.
I had misunderstood how protocol V2 works. This implementation only
works if the negotiation during fetch is done in one round.
Fixing this is substantial work in BasePackFetchConnection. Basically
I think I'd have to change back negotiate to the V0 version, and have
a doFetch() that does
if protocol V2
doFetchV2()
else
doFetchV0()
with doFetchV0 the old code, and doFetchV2 completely new.
Plus there would need to be a HTTP test case requiring several
negotiation rounds.
This is a couple of days work at least, and I don't know when I will
have the time to revisit this. So although the rest of the code is
fine I prefer to back this out completely and not leave a only half
working implementation in the code for an indeterminate time.
Bug: 553083
Change-Id: Icbbbb09882b3b83f9897deac4a06d5f8dc99d84e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (simplified ACK handling, delimiters, section
headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. Do the same for the SSH transport tests.
Bug: 553083
Change-Id: Ice9866aa78020f5ca8f397cde84dc224bf5d41b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This problem occurred when calling SubmoduleWalk#getModuleName if the
first submodule processed has a name and a path which do not match
SubmoduleWalk#getModuleName returned the module path instead of the
module name. In order to fix this SubmoduleWalk#getModuleName needs to
ensure that the modules config is loaded.
Bug: 565776
Change-Id: I36ce1fbc64c4849f9d8e39864b825c6e28d344f8
Signed-off-by: John Dallaway <john@dallaway.org.uk>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add new performance logging to register events of type duration.
The proposed logging is similar to the performance logging
in OS Gerrit https://gerrit-review.googlesource.com/c/gerrit/+/225628:
a global Singleton (LoggingContext in Gerrit) is
collecting the performance logs in a thread-safe events list,
and at the end of the monitored command the list of events is
retrieved and written to a log, after which it is cleared.
What this patch does:
The main component is the Singleton (PerformanceLogContext), which
is used to collect the records (PerformanceLogRecord) in one place
(ThreadLocal eventsList) from anywhere using
PerformanceLogContext.getInstance().addEvent().
Reason why this change is needed:
The current monitoring in JGit has several issues:
1. git fetch and git push events are handled separately
(PackStatistics and ReceivedPackStatistics), with no unified way
of writing or reading the statistics.
2. PostUploadHook is only invoked on the event of sending the
pack, which means that the PackStatistics is not available for
the fetch requests that did not end with sending the pack
(negotiation requests).
3. The way the logs are created is different from the performance
log approach, so the long-running operations need to be collected
from both performance log (for JGit DFS overridden operations and
Gerrit operations) and gitlog (for JGit ones).
The proposed performance logging is going to solve the above
mentioned issues: it collects all of the performance logs in one
place, thus accounting for the commands that do not result in
sending a pack. The logs are compatible with the ones on Gerrit.
Moreover, the Singleton is accessible anywhere in the call stack,
which proved to be successful in other projects like Dapper
(https://research.google/pubs/pub36356/).
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Change-Id: Iabfe667a3412d8a9db94aabb0f39b57f43469c41
This enables jgit to use any refs in the refs/ namespace when describing
commits.
Signed-off-by: Jason Yeo <jasonyeo88@gmail.com>
Change-Id: I1fa22d1c39c0e2f5e4c2938c9751d8556494ac26
Reason why this change is needed:
Currently the durations of fetch events are computed by
registering time instants with System.currentTimeMillis()
and calculating the differences with simple minus operation,
but multiple sources suggest that the best practice is to use
the Java 8 Duration and Instant objects.
What this patch does:
Get time measurements with Instant.now() instead of
System.currentTimeMillis() and calculate the duration of fetch
events (Reachability checks and Negotiation) using
Duration.between().toMillis().
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Change-Id: I573a0a0562070083cf5a5a196d9710f69a7fa587
Building with Bazel is failing with this error message:
HttpSupport.java:480: error: [OperatorPrecedence] Use grouping
parenthesis to make the operator precedence explicit
if (c >= 'a' && c <= 'z' || c >= 'A' && c <= 'Z') {
^
(see https://errorprone.info/bugpattern/OperatorPrecedence)
Did you mean 'if ((c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')) {'?
Change-Id: I96089d3158d06ba981cfdf2b03865261b328de23
Validate the extra headers and log but otherwise ignore invalid
headers. An empty http.extraHeader starts the list afresh.
The http.userAgent is restricted to printable 7-bit ASCII, other
characters are replaced by '.'.
Moves a support method from the ssh.apache bundle to HttpSupport in
the main JGit bundle.
Bug:541500
Change-Id: Id2d8df12914e2cdbd936ff00dc824d8f871bd580
Signed-off-by: James Wynn <james@jameswynn.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This enables EGit to override with a lenient variant that logs the
problem and continues with the default value. EGit needs this because
otherwise a corrupt core.excludesFile entry can render the whole UI
unusable (until the git config is fixed) because any use of the
WorkingTreeIterator will throw an InvalidPathException.
This is not a problem on OS X, where all characters are allowed in
file names. But on Windows some characters are forbidden... see bug
567296. The message of the InvalidPathException is not helpful since
it doesn't point to the origin of the problem. EGit can log a much
better message indicating the offending config file and entry in the
Eclipse error log, where the user can see it.
Bug: 567309
Change-Id: I4e57afa715ff3aaa52cd04b5733f69e53af5b1e0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Reason why this change is needed:
Getting this metric will help estimate how much time will be saved once
the reachability checks get optimized
What this patch does:
Measure time spent by requestValidator.checkWants() in parseWants() and save
it in an instance of PackStatistics.Accumulator.
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Change-Id: Id7fe4016f96549d9511a2c24052dad93cfbb31a4
Reason why this change is needed:
Getting this metric will help estimate how much time is spent
on negotiation in fetch V2.
What this patch does:
Measure time spent on negotiation rounds in UploadPack.fetchV2()
and save it in an instance of PackStatistics.Accumulator.
This is the same way the statistics are already gathered for
protocol V0/V1.
Change-Id: I14e55dd6ff743cb0b21b4953b533269ef069abb1
When comparing git directory paths to check whether one is a prefix
of another, one must add a slash to avoid false prefix matches when
one directory name is a prefix of another. The path "audio" is not
a prefix of the path "audio-new", but would be a prefix of a path
"audio/new".
Bug: 566799
Change-Id: I6f671ca043c7c2c6044eb05a71dc8cca8d0ee040
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This is useful to access git repositories behind a bastion server
(jump host).
Add a constant for the config; rewrite the whole connection initiation
to parse the value and (recursively) set up the chain of hops. Add
tests for a single hop and two different ways to configure a two-hop
chain.
The connection timeout applies to each hop in the chain individually.
Change-Id: Idd25af95aa2ec5367404587e4e530b0663c03665
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Since there is no negotiation for a push, the client is probably sending
redundant objects and bytes which already exist in the server.
Add more metrics in the stats to quantify it. Duplicated size and number
to measure the size and the number of duplicated objects which should
not be pushed.
Change-Id: Iaacd4761ee9366a0a7ec4e26c508eff45c8744de
Signed-off-by: Yunjie Li <yunjieli@google.com>
* stable-5.9:
Prepare 5.9.1-SNAPSHOT builds
JGit v5.9.0.202009080501-r
[releng] Enable japicmp for the fragments added in 5.8.0
GitlinkMergeTest: fix boxing warnings
Remove unused API problem filters
Add missing since tag on BundleWriter#addObjectsAsIs
GPG: include signer's user ID in the signature
Change-Id: Iaa96f9228752540f446fc232a49f31a738fd8d30
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* master:
SshdSession: close channel gracefully
jgit: Add DfsBundleWriter
Prepare 5.10.0-SNAPSHOT builds
ResolveMerger: do not content-merge gitlinks on del/mod conflicts
ResolveMerger: Adding test cases for GITLINK deletion
ResolveMerger: choose OURS on gitlink when ignoreConflicts
ResolveMerger: improving content merge readability
ResolveMerger: extracting createGitLinksMergeResult method
ResolveMerger: Adding test cases for GITLINK merge
Back out the version change to 5.10.0-SNAPSHOT which was done on master
already.
Change-Id: I1a6b1f0b8f5773be47823d74f593d13b16a601d5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
DfsBundleWriter writes out the entire repository to a Git bundle file.
It packs all objects included in the packfile by concatenating all pack
files. This makes the bundle creation fast and cheap. Useful for backing
up a repository as-is.
Change-Id: Iee20e4b1ab45b2a178dde8c72093c0dd83f04805
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
* changes:
ResolveMerger: do not content-merge gitlinks on del/mod conflicts
ResolveMerger: Adding test cases for GITLINK deletion
ResolveMerger: choose OURS on gitlink when ignoreConflicts
ResolveMerger: improving content merge readability
ResolveMerger: extracting createGitLinksMergeResult method
ResolveMerger: Adding test cases for GITLINK merge
* stable-5.9:
Upgrade maven-resources-plugin to 3.2.0
Upgrade plexus-compiler version to 2.8.8
[bazel] Add missing dependency to slf4j-api
[errorprone] DirCacheEntry: make clear operator precedence
[errorprone] PackWriter#parallelDeltaSearch: avoid suppressed exception
[errorprone] Declare DirCache#version final
Add jgit-4.17-staging target platform for 2020-09
Update target platform to R20200831200620
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Change-Id: I2e2f41cf6ebbcb45b8978b519db3f1c8f7afb5f4
Previously ResolveMerger tried to make a fulltext merge entry in case
one of sides got deleted regardless of file mode. This is not
applicable for GITLINK type of entry. After this change it is
rendering appropriate merge result.
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: Ibdb4557bf8781bdb48bcee6529e37dc80582ed7e
Option ignoreConflicts is used when a caller want to create a virtual
commit and use it in a future merge (recursive merge) or show it on
UI (e.g. Gerrit). According to contract in case of ignoreConflicts
ResolveMerger should populate only stage 0 for entries with merge
conflicts as if there is no conflict. Current implementation breaks
this contract for cases when gitlink revision is ambiguous.
Therefore, always select 'ours' when we merge in ignoreConflicts mode.
This will satisfy the contract contract, so recursive merge can
succeed, however it is an arbitrary decision, so it is not guaranteed
to select best GITLINK in all cases.
GITLINK merging is a special case of recursive merge because of
limitations of GITLINK type of entry. It can't contain more than 1 sha-1
so jgit can't write merge conflicts in place like it can with a blob.
Ideally we could signal the conflict with a special value (like
'0000...'), but that must be supported by all tooling (git fsck, c-git)."
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: Id4e9bebc8e828f7a1ef9f83259159137df477d89
Due to an integer overflow bug, the current "Index file is too large
for jgit" check did not work properly and subsequently a
NegativeArraySizeException was raised.
Change-Id: I2736efb28987c29e56bc946563b7fa781898a94a
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Previous code used a minimum granularity of 1 microsecond and would
iterate 233 times on a system where the resolution is 1 second (for
instance, Java 8 on Mac APFS).
New code uses a binary search between the maximum we care about (2
seconds) and zero, with a minimum granularity of also 1 microsecond.
This takes at most 19 iterations (guaranteed). For a file system with 1
second resolution, it takes 4 iterations (1s, 0.5s, 0.8s, 0.9s). With
an up-front check at 1 microsecond and at 1 millisecond this performs
equally well as the old code on file systems with a fine resolution.
(For instance, Java 11 on Mac APFS.)
Also handle obscure cases where the file timestamp implementation may
yield bogus values (as observed on HP NonStop). If such an error case
occurs, log a warning and abort the measurement at the last good value.
Bug: 565707
Change-Id: I82a96729b50c284be7c23fbdf3d0df1bddf60e41
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
LockFile.lock() will create it anyway when the config file is created.
Bug: 565637
Change-Id: I078b89a695193fd76f130f6de7ac1cf26d2f8f0f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Otherwise locking problems may ensue if the JGit config itself is
on a different file system. Since the internal is already updated,
it is not really important when exactly the value gets persisted.
By queueing up separate Runnables executed by a single thread we
avoid concurrent write access to the JGit config, and nested calls
to getFileStoreAttributes(Path) result in serialized attempts to
write.
The thread for writing the config must not be a daemon thread. If
it were, JVM shutdown might kill it anytime, which may lead to
the config not being written, or worse, a config.lock file being
left behind.
Bug: 566170
Change-Id: I07e3d4c5e029d3cec9ab5895002fc4e0c7948c40
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If the background job is a little late, the true result might
arrive and be cached later. So make sure we don't cache the large
fallback resolution in the per-directory cache. Otherwise we'd work
with the large fallback until the next restart.
Bug: 566170
Change-Id: I7354a6cfddfc0c05144bb0aa41c23029bd4f6af0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git never converts line endings if the version in the repository is a
text file with CR/LF and text=auto. See [1]: "When the file has been
committed with CRLF, no conversion is done."
Because the sentence just before is about converting line endings on
check-in, I had understood that in commit 60cf85a [2] to mean that no
conversion on check-in was to be done. However, as bug 565048 and a
code inspection of the C git code showed it really means no conversion
is done on check-in *or check-out*.
If the text attribute is not set but core.autocrlf = true, this is
the same as text=auto eol=crlf. C git does not convert on check-out
even on text=auto eol=lf if the index version is a text file with
CR/LF.
For check-in, one has to look at the intended target, which is done
in WorkingTreeIterator since commit 60cf85a. For check-out, it can
be done by looking at the source and can thus be done in the
AutoLFOutputStream.
Additionally, provide a constructor for AutoLFInputStream to do
the same; for cases where the equivalent of a check-out is done via
an input stream obtained from a blob. (EGit does that in its
GitBlobStorage for the Eclipse compare framework; it's more efficient
than using a TemporaryBuffer and DirCacheCheckout.getContent(), and
it avoids the need for a temporary file.)
Adapt existing tests, and add new checkout and merge tests to verify
the resulting files have the correct line endings.
EGit's GitBlobStorage will need to call the new version of
EolStreamTypeUtil.wrapInputStream().
[1] https://git-scm.com/docs/gitattributes#Documentation/gitattributes.txt-Settostringvalueauto
[2] https://git.eclipse.org/r/c/jgit/jgit/+/127324
Bug: 565048
Change-Id: If1282ef43e2abd00263541bd10a01fe1f5c619fc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The WindowCache is configured statically with a default
WindowCacheConfig. The default config says (for backwards
compatibility reasons) to publish the MBean. As a result,
the MBean always gets published.
By delaying the MBean registration until the first call to
getInstance() or get(PackFile, long) we can avoid the forced
registration and do it only if not re-configured in the meantime
not to publish the bean. (As is done by Egit, to avoid a very
early costly access to the user and system config during plug-in
activation.)
Bug: 563740
Change-Id: I8a941342c0833acee2107515e64299aada7e0520
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Index format version 4 was introduced in C git in 2012. It's about
time that JGit can deal with it.
Version 4 added prefix path compression. Instead of writing the full
path for each index entry to disk, only the difference to the previous
entry's path is written: a variable-encoded int telling how many bytes
to remove from the previous entry's path to get the common prefix,
followed by the new suffix.
Also, cache entries in a version 4 index are not padded anymore.
Internally, version 3 and version 4 index entries are identical; it's
only the stored format that changes.
Implement this path compression, and make sure we write an index file
that we read previously in the same format. (Only changing from version
2 to version 3 if there are extended flags.)
Add support for the "feature.manyFiles" and the "index.version" git
configs, and honor them when writing a new index file.
Add tests, including a compatibility test that verifies that JGit can
read a version 4 index generated by C git and write an identical
version 4 index.
Bug: 565774
Change-Id: Id83241cf009e50f950eb42f8d56b834fb47da1ed
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The timeout on RemoteSession.exec() cannot be a timeout for the
whole command. It can only be a timeout for setting up the process;
after that it's the application's responsibility to implement some
timeout for the execution of the command, for instance by calling
Process.waitFor(int, TimeUnit) or through other means.
Sessions returned by an SshSessionFactory are already connected and
authenticated -- they must be, because RemoteSession offers no
operations for connecting or authenticating a session.
Change the implementation of SshdExecProcess.waitFor() to wait
indefinitely. The original implementation used the timeout from
RemoteSession.exec() because of that erroneous javadoc.
Change-Id: I3c7ede24ab66d4c81f72d178ce5012d383cd826e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
SshSupport.runSshCommand() had a comment that wait with time-out
could not be used because JSchProcess.exitValue() threw the wrong
unchecked exception when the process was still running.
Fix this and make JSchProcess.exitValue() throw the right exception,
then wait with a time-out in SshSupport.
The Apache sshd client's SshdExecProcess has always used the correct
IllegalThreadStateException.
Add tests for SshSupport.runCommand().
Change-Id: Id30893174ae8be3b9a16119674049337b0cf4381
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If I create a repository containing an empty file and clone it
with
git clone --no-checkout --filter=blob:none \
https://url/of/repository
then I would expect no blobs to be transferred over the wire. Alas,
JGit rewrites filter=blob:none to filter=blob:limit=0, so if the
repository contains an empty file then the empty blob gets
transferred.
Fix it by teaching JGit about filters based on object type to
complement the existing filters based on object size. This prepares
us for other future filters such as object:none.
In particular, this means we do not need to look up the size of the
filtered blobs, which should speed up clones. Noticed by Anna
Pologova and Terry Parker.
Change-Id: Id4b234921a190c108d8be2c87f54dcbfa811602a
Signed-off-by: Jonathan Nieder <jrn@google.com>
Teach the FilterSpec serialization code about tree filters so they can
be communicated over the wire and understood by the server.
While we're here, harden the FilterSpec serialization code to throw
IllegalStateException if we encounter a FilterSpec that cannot be
expressed as a "filter" line. The only public API for creating a
Filterspec is to pass in a "filter" line to be parsed, so these should
not appear in practice.
Change-Id: I9664844059ffbc9c36eb829e2d860f198b9403a0
Signed-off-by: Jonathan Nieder <jrn@google.com>
OS X ships with a default /usr/bin/git that is just a wrapper that
at run-time delegates to the selected XCode toolchain, and that
prompts the user to install the XCode command line tools if not
already installed.
This is annoying for people who don't want to do so, since they'll
be prompted on each Eclipse start. Also, since on OS X the $PATH for
applications started via the GUI is not the same as the $PATH as set
via the shell profile, just using /usr/bin/git (which will normally
be found when JGit runs inside Eclipse) may give slightly surprising
results if the user has installed a non-Apple git and changed his
$PATH in the shell such that the non-Apple git is used in the shell.
(For instance by placing /usr/local/bin earlier on the path.) Eclipse
and the shell will use different git executables, and thus different
git system configs.
Therefore, try to find git via bash --login -c 'which git' not only
if we couldn't find it on $PATH but also if we found the default git
/usr/bin/git. If that finds some other git, use that. If the bash
approach also finds /usr/bin/git, double check via xcode-select -p
that an XCode git is present. If not, assume there is no git installed,
and work without any system config.
Bug: 564372
Change-Id: Ie9d010ebd9437a491ba5d92b4ffd1860c203f8ca
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Using a fixed thread pool with unbounded LinkedBlockingQueue fixes the
RejectedExecutionException thrown if too many threads try to
concurrently determine filesystem attributes.
Comparing that to an alternative implementation using an unbounded
thread pool instead showed similar performance with the reproducer (in
range of 100-1000 threads in reproducer) on my mac:
threads time
fixed threadpool up to 5 threads with LinkedBlockingQueue of unlimited
queue size
100 1103 ms
200 1602 ms
300 2369 ms
500 4002 ms
1000 11071 ms
unbounded cached threadpool
100 1108 ms
200 1591 ms
300 2299 ms
500 4577 ms
1000 11196 ms
Bug: 564202
Change-Id: I773da7414a1dca8e548349442dca9b56643be946
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Include implementation version in jgit library. This version is used
by other products that depend on JGit, and built using Bazel and not
consume officially released artifact from Central or Eclipse own Maven
repository.
Most notably, in Gerrit Code Review JGit agent that was previously
reported as "unknown", is now reported as:
JGit/v5.8.0.202006091008-r-16-g14c43828d
using this change [1].
[1] https://gerrit-review.googlesource.com/c/gerrit/+/272505
Change-Id: Ia50de9ac35b8dbe9e92d8ad7d0d14cd00f057863
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
In JGit 5.0, the FileTreeIterator was changed to skip ignored folders
by default. To catch tracked files inside ignored folders, the tree
walk needs to have a DirCacheIterator, and the FileTreeIterator has
to know about that DirCacheIterator via setDirCacheIterator(). (Or
the optimization has to be switched off explicitly via
setWalkIgnoredDirectories(true).)
Skipping ignored directories is an important optimization in some
cases, for instance in node.js/npm projects, where we'd otherwise
traverse the whole huge and deep hierarchy of the typically ignored
node_modules folder.
While all uses of WorkingTreeIterator in JGit had been adapted,
DiffFormatter was forgotten. To make it work correctly (again) also
for such cases, make it set up a WorkingTreeeIterator automatically,
and make sure the WorkingTreeSource can find such files, too. Also
pass the repository to the TreeWalks used inside the DiffFormatter
to pick up the correct attributes, filters, and line-ending settings.
Bug: 565081
Change-Id: Ie88ac81166dc396ba28b83313964c1712b6ca199
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make sure we don't produce a spurious empty line at the end.
Bug: 564428
Change-Id: Ib991d93fbd052baca65d32a7842f07f9ddeb8130
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The message "Too many commands" implies there is a hard limit on the
number of commands, which isn't the case. The limit is on the total
size of the received data, as explained in change I84317d396 which
introduced the configuration setting receive.maxCommandBytes:
shorter reference names allow for more commands, longer reference
names permit fewer commands per batch.
Change the message to:
Commands size exceeds limit defined in receive.maxCommandBytes
Change-Id: I678b78f919b2fec8f8058f3403f2541c26a5d00e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>