A compaction of reftables is just copying the results of a
MergedReftable into a ReftableWriter. Wrap this up into a utility.
Change-Id: I6f5677d923e9628993a2d8b4b007a9b8662c9045
MergedReftable combines multiple reference tables together in a stack,
allowing higher/later tables to shadow earlier/lower tables. This
forms the basis of a transaction system, where each transaction writes
a new reftable containing only the modified references, and readers
perform a merge on the fly to get the latest value.
Change-Id: Ic2cb750141e8c61a8b2726b2eb95195acb6ddc83
ReftableReader provides sequential scanning support over all
references, a range of references within a subtree (such as
"refs/heads/"), and lookup of a single reference. Reads can be
accelerated by an index block, if it was created by the writer.
The BlockSource interface provides an abstraction to read from the
reftable's backing storage, supporting a future commit to connect
to JGit DFS and the DfsBlockCache.
Change-Id: Ib0dc5fa937d0c735f2a9ff4439d55c457fea7aa8
This is a simple writer to create reftable formatted files. Follow-up
commits will add support for reading from reftable, debugging
utilities, and tests.
Change-Id: I3d520c3515c580144490b0b45433ea175a3e6e11
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] 6628eb41db
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Currently there is no way to determine the precise changes done
to the working tree by a JGit command. Only the CheckoutCommand
actually provides access to the lists of modified, deleted, and
to-be-deleted files, but those lists may be inaccurate (since they
are determined up-front before the working tree is modified) if
the actual checkout then fails halfway through. Moreover, other
JGit commands that modify the working tree do not offer any way to
figure out which files were changed.
This poses problems for EGit, which may need to refresh parts of the
Eclipse workspace when JGit has done java.io file operations.
Provide the foundations for better file change tracking: the working
tree is modified exclusively in DirCacheCheckout. Make it emit a new
type of RepositoryEvent that lists all files that were modified or
deleted, even if the checkout failed halfway through. We update the
'updated' and 'removed' lists determined up-front in case of file
system problems to reflect the actual state of changes made.
EGit thus can register a listener for these events and then knows
exactly which parts of the Eclipse workspace may need to be refreshed.
Two commands manage checking out individual DirCacheEntries themselves:
checkout specific paths, and applying a stash with untracked files.
Make those two also emit such a new WorkingTreeModifiedEvent.
Furthermore, merges may modify files, and clean, rm, and stash create
may delete files.
CQ: 13969
Bug: 500106
Change-Id: I7a100aee315791fa1201f43bbad61fbae60b35cb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When creating a new PackFile instance it is specified whether this pack
has an associated bitmap index file or not. This information is cached
and the public method getBitmapIndex() will always assume a bitmap index
file must exist if the cached data tells so. But it may happen that the
packfiles are repacked during a gc in a different process causing the
packfile, bitmap-index and index file to be deleted. Since JGit still
has an open FileHandle on the packfile this file is not really deleted
and can still be accessed. But index and bitmap index file are deleted.
Fix getBitmapIndex() to invalidate the cached packfile instance if such
a situation occurs.
This problem showed up when a gerrit server was serving repositories
which where garbage collected with native git regularly. Fetch and
clone commands for certain repositories failed permanently after a
native git gc had deleted old bitmap index files.
Change-Id: I8e620bec74dd3f310ba42024f9a657062f868f0e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Per the git config documentation[1], pushInsteadOf is ignored when
a remote has explicit pushUris.
Implement this, and adapt tests.
Up to now JGit mistakenly applied pushInsteadOf also to existing
pushUris. If some repositories had relied on this mis-feature,
pushes may newly suddenly fail (the uncritical case; the config
just needs to be fixed) or even still succeed but push to unexpected
places, namely to the non-rewritten pushUrls (the critical case).
The release notes should point out this change.
[1] https://git-scm.com/docs/git-config
Bug: 393170
Change-Id: I38c83204d2ac74f88f3d22d0550bf5ff7ee86daf
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
According to [1], pushInsteadOf is
1. applied to the uris, not to the pushUris
2. ignored if a remote has an explicit pushUri
JGit applied it only to the pushUris. As a result, pushInsteadOf was
ignored for remotes having only a uri, but no pushUri.
This commit implements (1) if there are no pushUris. I did not dare
implement (2) because:
* there are explicit tests for it that expect that pushInsteadOf gets
applied to existing pushUrls, and
* people may actually use and rely on this JGit behavior.
[1] https://git-scm.com/docs/git-config
Bug: 393170
Change-Id: I6dacbf1768a105190c2a8c5272e7880c1c9c943a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This matches the proposal that has been discussed at length on
git-core mailing list and seems to be the accepted convention.
Change-Id: I9f6ab15144826893d1e2a4b48a2d657d6dd445ec
Otherwise fancy combinations of attributes (binary or -text in
combination with crlf or eol) may result in the corruption of binary
data.
Bug: 520910
Change-Id: I3ffc666c13d1b9d2ed987b69a67bfc7f42ccdbfc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Attribute rules must match against the entry path relative to the
attribute node containing the rule. The global entry path is to be
used only for the init and the global node (and of course the root
node).
Bug: 520677
Change-Id: I80389a2dc272a72312729ccd5358d7c75e1ea20a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Happily, most anonymous SectionParser implementations can be replaced
with FooConfig::new, as long as the constructor takes a single Config
arg. Many of these, the non-public ones, can in turn be inlined. A few
remaining SectionParsers can be lambdas.
Change-Id: I3f563e752dfd2007dd3a48d6d313d20e2685943a
This avoids executing mergeAlgorithm.merge on binary data, which is
unlikely to be useful.
Arguably, binary data should not make it to
ResolveMerger#contentMerge, but this approach has the following
advantages:
* binary detection is exact, since it doesn't only look at the start
of the blob.
* it is cheap, as we have to iterate over the bytes anyway to find
'\n'.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: I424295df1dc60a719859d9d7c599067891b15792
Very short abbreviations that are under 8 hex digits do not
have values in w2. Use w1 as the Java hashCode() instead, so
that the prefix of the abbreviation is always included in the
hashing function used by any java.util.Collection type.
Change-Id: Idaf69f86b62630ba4a022d31b4c293c6d138f557
SpotBugs [1] is the spiritual successor of FindBugs, carrying on from
the point where it left off with support of its community.
[1] http://spotbugs.readthedocs.io/
Change-Id: I127f2c54b04265b6565e780116617ffa8a4d7eaf
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In a server scenario such as Gerrit Code Review, there may be many
atomic BatchRefUpdates contending for locks on both the packed-refs file
and some subset of loose refs. We already retry lock acquisition to
improve this situation slightly, but we can do better by using an
in-process lock. This way, instead of retrying and potentially exceeding
their timeout, different threads sharing the same Repository instance
can wait on a fair lock without having to touch the disk lock. Since a
server is probably already using RepositoryCache anyway, there is a high
likelihood of reusing the Repository instance.
Change-Id: If5dd1dc58f0ce62f26131fd5965a0e21a80e8bd3
If a repo frequently uses PackedBatchRefUpdates, there is likely to be
contention on the packed-refs file, so it's not appropriate to fail
immediately the first time we fail to acquire a lock. Add some logic to
RefDirectory to support general retrying of lock acquisition.
Currently, there is a hard-coded wait starting at 100ms and backing off
exponentially to 1600ms, for about 3s of total wait. This is no worse
than the hard-coded backoff that JGit does elsewhere, e.g. in
FileUtils#delete. One can imagine a scheme that uses per-repository
configuration of backoff, and the current interface would support this
without changing any callers.
Change-Id: I4764e11270d9336882483eb698f67a78a401c251
Make sure all objects referenced by references are reachable. Stop at
the first missing object.
Change-Id: Ifcd7392c4321b17d9290bd87f038bc62bc10dabb
Signed-off-by: Zhen Chen <czhen@google.com>
JGit already had some fsck-like classes like ObjectChecker which can
check for an individual object.
The read-only FsckPackParser which will parse all objects within a pack
file and check it with ObjectChecker. It will also check the pack index
file against the object information from the pack parser.
Change-Id: Ifd8e0d28eb68ff0b8edd2b51b2fa3a50a544c855
Signed-off-by: Zhen Chen <czhen@google.com>
On-disk reflogs are not stored in the packed-refs file, so we cannot
ensure atomic updates. We choose the lesser evil of dropping failed
reflog updates on the floor, rather than throwing an exception even
though the underlying ref updates succeeded.
Add tests for reflogs to BatchRefUpdateTest.
Change-Id: Ia456ba9e36af8e01fde81b19af46a72378e614cd
The existing packed-refs file provides a mechanism for implementing
atomic multi-ref updates without any changes to the on-disk format or
lockfile protocol. We just need to make sure that there are no loose
refs involved in the transaction, which we can achieve by packing the
refs while holding locks on all loose refs. Full details of the
algorithm are in the PackedBatchRefUpdate javadoc.
This change does not implement reflog support, which will come in a
later change.
Change-Id: I09829544a0d4e8dbb141d28c748c3b96ef66fee1
ReceiveCommand.Result has a slightly richer set of possibilities, so it
makes sense for RefUpdate.Result to have more values in order to match.
In particular, this allows us to return REJECTED_MISSING_OBJECT from
RefUpdate when an object is missing.
The comment in RefUpdate#safeParse about expecting some old objects to be
missing is only applicable to the old ID, not the new ID. A missing new
ID is a bug or programmer error, and we should not update a ref to point
to one.
Fix various tests that started failing because they depended for no good
reason on setting refs to point to nonexistent objects; it's always easy
to create a real object when necessary.
It is possible that some downstream users of RefUpdate.Result might
choose to handle one of the new statuses differently, for example by
providing a more user-readable error message; that is not done in this
change.
Change-Id: I734b1c32d5404752447d9e20329471436ffe05fc
Fix patch matching for patterns of form a/b/** : this should not match
paths like a/b but still match a/b/ and a/b/c.
Change-Id: Iacbf496a43f01312e7d9052f29c3f9c33807c85d
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* changes:
Add tests for updating single refs to missing objects
Fix deleting symrefs
RefDirectory: Throw exception if CAS of packed ref list fails
ReceiveCommand: Explicitly check constructor preconditions
BatchRefUpdate: Document when getPushOptions is null
This change makes it possible to configure the 'inCoreLimit' of LocalFile
used in ResolveMerger#insertMergeResult. Since LocalFile itself has some
risks, e.g. it may be left behind as garbage in case of failure. It should
be good to be able to control the size limit for using LocalFile.
Change-Id: I3dc545ade370b2bbdb7c610ed45d5dd4d39b9e8e
Signed-off-by: Changcheng Xiao <xchangcheng@google.com>
Allow a DFS implementation to report blockSize to DfsPackFile,
bypassing alignment errors and corrections in the DfsBlockCache when
the blockSize of a specific file differs from the cache's configured
blockSize.
Change-Id: Ic376314d4a86a0bd528c033e169d93eef035b233
When a file uses a different block size (e.g. 500) than the cache
(e.g. 512), and the DfsPackFile's blockSize field has not been
initialized, the cache misaligns block loads. The cache uses its
default of 512 to compute the block alignment instead of the file's
500.
This causes DfsReader try to set an empty range into an Inflater,
resulting in an object being unable to load.
Change-Id: I7d6352708225f62ef2f216d1ddcbaa64be113df6
Holding the current DfsBlock in a local variable 'b' may prevent the
Java GC from reclaiming it while loading the next block. Remove the
local variable and rely only on the field.
Change-Id: Ibfc8394cac717b485fdc94d5c8479c3f8ca78ee4
In the future with reftable a DFS implementation may choose to create
a PackDescription that contains only a REFTABLE extension. Filter
these out by only creating a DfsPackFile if the PackDescription as the
expected PackExt.PACK.
Change-Id: I4c831622378156ae6b68f82c1ee1db5e150893be
Not all DFS implementations use globally unique pack names in the
DfsPackDescription. Most require the DfsRepositoryDescription to
qualify the pack. Include DfsRepositoryDescription in the default
DfsStreamKey implementation, to prevent cache collisions.
Change-Id: I9ebf0c76bf2b414a702ae050b32e42588067bc44
Using a HashMap is overkill for this storage. PackExt is a
constrained type that permits no more than 32 unique values in the JVM.
Each is assigned a unique index (getPosition), which can be used as
indexes in a simple long[].
Change-Id: Ib8e3b2db15d3fde28989b6f4b9897f8a7bb36f3b
When 07f98a8b71 ("Derive DfsStreamKey from DfsPackDescription")
stopped caching DfsPackFile in the DfsBlockCache, the DfsPackFile began
to always load the idx, bitmap, or compute reverse index, as the cache
handles were no longer populated by prior requests.
Rework caching to lookup the objects from the DfsBlockCache if the
local DfsPackFile handle is invalid. This allows the DfsPackFile to
be more of a flyweight instance across requests.
Change-Id: Ic7b42ce2d90692cccea36deb30c2c76ccc81638b
While implementing a custom subclass of DfsStreamKey it became obvious
the required derive(String) was making it impossible to construct an
efficient key in all cases.
Instead, use a special wrapper type ForReverseIndex around the INDEX's
own DfsStreamKey to denote the reverse index stream in the
DfsBlockCache. This adds a smaller layer of boxing, but eliminates
weird issues for DFS implementors using specialized DfsStreamKey
implementations for space efficiency reasons.
Now that DfsStreamKey is reasonably light-weight, avoid allocating the
index and reverse index keys until necessary. DfsPackFile mostly
holds the DfsBlockCache.Ref handle to the object, and only needs the
DfsStreamKey when its looking up the handle.
Change-Id: Icea78e8f7f1514087b94ef5f525d9573ea2913f2
By making this a deterministic function, DfsBlockCache can stop
retaining a map of every DfsPackDescription it has ever seen. This
fixes a long standing memory leak in DfsBlockCache.
This refactoring also simplifies the idea of setting up more
lightweight objects around streams.
Change-Id: I051e7b96f5454c6b0a0e652d8f4a69c0bed7f6f4
The RefDirectory implementation of doDelete never considered whether to
delete a symref or its leaf, because the detachingSymbolicRef bit was
never exposed from RefUpdate. The behavior was thus incorrectly to
always delete the symref, never the leaf.
There was no test for this behavior. The only thing that attempted to be
a test was testDeleteHeadInBareRepo, but this test was broken for
reasons unrelated to this bug. Specifically, it set the leaf to point to
a completely nonexistent object, and then asserted that deleting HEAD
resulted in NO_CHANGE. The only reason this test ever passed is because
of a quirk of updateImpl, which treats a missing object as the same as
null. This quirk aside, the test wasn't really testing the right thing.
Turn this into a real test by writing out a real object and pointing the
leaf at that.
Also, add a test for the detachingSymbolicRef case, i.e. deleting the
symref and leaving the leaf alone.
Change-Id: Ib96d2a35b4f99eba0734725486085fc6f9d78aa5
The contents of the packedRefList AtomicReference should never differ
from what we expect prior to writing, because this segment of the code
is protected by the packed-refs lock file on disk. If it does happen,
whether due to programmer error or a rogue process not respecting the
locking protocol, it's better to let the caller know than to silently
drop the whole commit operation on the floor.
The existing concurrentOnlyOneWritesPackedRefs test is inherently
nondeterministic as written, and was already about 6% flaky as measured
by bazel:
$ bazel test --runs_per_test=200 //org.eclipse.jgit.test:org_eclipse_jgit_internal_storage_file_GcPackRefsTest
...
INFO: Elapsed time: 42.608s, Critical Path: 10.35s
//org.eclipse.jgit.test:org_eclipse_jgit_internal_storage_file_GcPackRefsTest FAILED in 12 out of 200 in 1.6s
Stats over 200 runs: max = 1.6s, min = 1.1s, avg = 1.3s, dev = 0.1s
This flakiness was caused by the assumption that exactly one of the 2
threads would fail, when both might actually succeed in practice due to
racing on the compare-and-swap.
For whatever reason, this change affected the interleaving behavior in
such a way that the flakiness jumped to around 50%. Making the
interleaving of the test fully deterministic is beyond the scope of this
change, but a simple tweak to the assertion is enough to make it pass
consistently 200+ times both before and after this change.
Change-Id: I5ff4dc39ee05bda88d47909acb70118f3d0c8f74
Some downstream code checks whether a ReceiveCommand is a create or a
delete based on the type field. Other downstream code (in particular a
good chunk of Gerrit code I wrote) checks the same thing by comparing
oldId/newId to zeroId. Unfortunately, there were no strict checks in the
constructor that ensures that zeroId is only set for oldId/newId if the
type argument corresponds, so a caller that passed mismatched IDs and
types would observe completely undefined behavior as a result. This is
and always has been a misuse of the API; throw IllegalArgumentException
so the caller knows that it is a misuse.
Similarly, throw from the constructor if oldId/newId are null. The
non-nullness requirement was already documented. Fix RefDirectoryTest to
not do the wrong thing.
Change-Id: Ie2d0bfed8a2d89e807a41925d548f0f0ce243ecf
This new base class has the minimum set of properties and methods
necessary for DfsBlockCache to manage blocks of a file in the cache.
Subclasses can use DfsBlockCache for any content.
This refactoring opens the door for additional PackExt types other
than PACK to be stored on a block-by-block basis by the DfsBlockCache.
Change-Id: I307228fc805c3ff0c596783beb24fd52bec35ba8
Instead of overloading the pack's DfsStreamKey with negative positions
for the idx, reverse idx and bitmap, assign a unique DfsStreamKey for
each of these related streams.
Change-Id: Ie048036c74a1d1bbf5ea7e888452dc0c1adf992f
This renaming supports reusing DfsStreamKey in a future commit
to index other PackExt type streams inside of the DfsBlockCache.
Change-Id: Ib52d374e47724ccb837f4fbab1fc85c486c5b408
* changes:
RefList: Support capacity <= 0 on new builders
Short-circuit writing packed-refs if no refs were packed
BatchRefUpdate: Clarify some ref prefix calls
Right now, PackParser relies on the object count from the pack header.
However, when creating Dfs INSERT packs, the object count is not known
at the beginning of the operation. And when we append the base to a
RECEIVE pack, we can't modify the pack header for object count in most
Dfs implementations.
Make it possible to tell PackParser the expected object count by adding
a setter for expectedObjectCount, implementation can overwrite the
object count in onPackHeader function.
Change-Id: I646ca33ab2b843de84edc287abfb65803a56a927
Signed-off-by: Zhen Chen <czhen@google.com>
Callers may estimate the size, and their estimate may be zero. Silently
allow this, rather than throwing IndexOutOfBoundsException later during
add.
Change-Id: Ife236f9f4ce469c57b18e76cf4fad6feb52cb2b0
Inline the old addRefToPrefixes, since it was just a glorified addAll.
Split getPrefixes into a variant, addPrefixesTo, that doesn't allocate a
small Collection on every invocation. Use this in the tight loop of
getTakenPrefixes.
Change-Id: I25cc7feef0c8e312820d85b7ed48559da49b83d2
If a block is missing from the block cache, open the pack stream,
retain the ReadableChannel, and turn on read-ahead. This should help
to load a medium sized pack into a cold cache more quickly from a
slower IO stream, as the pack is scanned sequentially and missing
blocks are more likely to be available through the read-ahead.
Change-Id: I3300d936b9299be6d9eb642992df7c04bb439cde
The merger is now able to react to the use of the merge attribute.
The value unset and the custom value 'binary' are handled (-merge
and merge=binary)
Since the specification of the merge attribute states that when the
attribute is unset, ours version must be kept in case of a conflict, we
don't overwrite the file but keep the local version.
Bug: 517128
Change-Id: Ib5fbf17bdaf727bc5d0e106ce88f2620d9f87a6f
Signed-off-by: Mathieu Cartaud <mathieu.cartaud@obeo.fr>
These config options allow overriding the message type (error, warn or
ignore) of a specific message ID such as missingEmail.
The supported fsck message IDs are defined in ObjectChecker.ErrorType.
Since TransferConfig.FsckMode wasn't public parsing fsck configuration
options like e.g. fsck.missingEmail=ignore failed with an
IllegalAccessException. Fix this by declaring this enum public.
Change-Id: I3f41ff7a76a846250a63ce92a9fd111eb347269f
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In the case of multiple tags on the same commit, jgit previously
only ever looked at the last of those tags; git behaviour is to
return the first tag (or first matching one if --match is
specified).
Bug: 518377
Change-Id: I3b6b58ad9f8aa3879ae35b84542b7bddc74a27d6
Signed-off-by: Oliver Lockwood <oliver.lockwood@cantab.net>
A `match()` method has been added to the DescribeCommand, allowing
users to specify one or more `glob(7)` matchers as per Git convention.
Bug: 518377
Change-Id: Ib4cf34ce58128eed0334adf6c4a052dbea62c601
Signed-off-by: Oliver Lockwood <oliver.lockwood@cantab.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When the configuration entry 'pull.ff' exists the merge of the pull will
use the value as fast forward option.
Bug: 474174
Change-Id: Ic8db2f00095ed81528667b064ff523911e6c122e
Signed-off-by: Mattias Neuling <neuling@dakosy.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Annotate the `recurse` parameter as @Nullable and expand the
Javadoc to clarify the precedence of options.
Change-Id: I7aee800cdbf8243133a0d353ef79b97b67ce011e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
- mark parameter to be nullable
- explain that we fallback to value of merge.ff if set to null and to
--ff if also not configured there
Change-Id: Id077763b95195d21543ac637f9939a6d4179e982
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If set, "singlePack" will create a single GC pack file for all
objects reachable from refs/*. If not set, the GC pack will contain
object reachable from refs/heads/* and refs/tags/*, and the GC_REST
pack will contain all other reachable objects.
Change-Id: I56bcb6a9da2c10a0909c2f940c025db6f3acebcb
Signed-off-by: Terry Parker <tparker@google.com>
* stable-4.8:
Use a dedicated executor to run auto-gc in command line interface
Allow to use an external ExecutorService for background auto-gc
Fetch: Add --recurse-submodules and --no-recurse-submodules options
Fix capitalization of command help summaries
Change-Id: I7c85f11daa34c11c7f6389de885a2183a686197e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If set use the external executor, otherwise use JGit's own simple
WorkQueue. Move WorkQueue to an internal package so we can reuse it
without exposing it in the public API.
Change-Id: I060d62ffd6692362a88b4bf13ee07b0dc857abe9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add options to control recursion into submodules on fetch.
Add a callback interface on FetchCommand, to allow Fetch to display
an update "Fetching submodule XYZ" for each submodule.
Change-Id: Id805044b57289ee0f384b434aba1dbd2fd317e5b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.8:
SubmoduleUpdateCommand#setCallback should return 'this'
CloneCommand#setCallback should return 'this'
Prepare 4.7.2-SNAPSHOT builds
JGit v4.7.1.201706071930-r
ArchiveCommand: Create prefix entry with commit time
Run auto GC in the background
Update Orbit to the Oxygen version R20170516192513
Change-Id: Ibf90b4899d097474e7836e6baab8829e66fca524
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The other methods in this class follow the builder pattern, and
return 'this', allowing multiple method calls to be chained in a
single statement.
Update the setCallback method to do the same.
Change-Id: I4ddaacd6d50601f47f61eb6be8b62c8d59cce062
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Object collision check requires read from local storage which may be
slow. We already delay this check for blobs, this change will also delay
other objects until the pack stream is closed. In this way, there is no
readCurs call until the pack stream is closed.
Change-Id: I3c8c4720dd19a5f64f8c7ddf07d815ed6877b6aa
Signed-off-by: Zhen Chen <czhen@google.com>
The other methods in this class follow the builder pattern, and
return 'this', allowing multiple method calls to be chained in a
single statement.
Update the setCallback method to do the same.
Change-Id: I0366d28bf66ba47f08ee7eee636d613c9fe079f5
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The cgit archive command creates a prefix (root) directory entry
in the archive file. That entry's time is set to the commit time.
This patch makes jgit's behavior consistent with with cgit:
prefix: hoge/ -> creates prefix directory "hoge/" entry.
prefix: hoge//// -> creates prefix directory "hoge/" entry.
prefix: hoge/foo -> does not create prefix directory entry, but for
each file/directory entry, prefix is added.
Change-Id: I2610e40ce37972c5f7456fdca6337e7fb07176e5
Signed-off-by: Yasuhiro Takagi <ytakagi@bea.hi-ho.ne.jp>
When running an automatic GC on a FileRepository, when the caller
passes a NullProgressMonitor, run the GC in a background thread. Use a
thread pool of size 1 to limit the number of background threads spawned
for background gc in the same application. In the next minor release we
can make the thread pool configurable.
In some cases, the auto GC limit is lower than the true number of
unreachable loose objects, so auto GC will run after every (e.g) fetch
operation. This leads to the appearance of poor fetch performance.
Since these GCs will never make progress (until either the objects
become referenced, or the two week timeout expires), blocking on them
simply reduces throughput.
In the event that an auto GC would make progress, it's still OK if it
runs in the background. The progress will still happen.
This matches the behavior of regular git.
Git (and now jgit) uses the lock file for gc.log to prevent simultaneous
runs of background gc. Further, it writes errors to gc.log, and won't
run background gc if that file is present and recent. If gc.log is too
old (according to the config gc.logexpiry), it will be ignored.
Change-Id: I3870cadb4a0a6763feff252e6eaef99f4aa8d0df
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Allow fetch to accept a SHA-1 on the left hand side of a RefSpec,
enabling callers to pass a specific SHA-1 they want that may not have
been advertised by the remote repository. This can be passed along to
the network protocol to be sent in a "want" line.
Rest of the plumbing only cares about the ObjectId of the Ref in
the askFor map, so make up a fake name using ObjectId.name() to
pass the desired ObjectId into the network code.
Change-Id: I620a189f3de005c403aa68b7d0442d6aa94e6056
When a command invoked from readPipe fails to launch (i.e. the exec call
fails due to a missing command executable), Process.start() throws,
which gets caught by the generic IOException handler, resulting in a
null return. This change detects this case and rethrows a
CommandFailedException instead.
Additionally, this change uses /bin/sh instead of bash for its posix
command failure test, to accomodate building in environments where bash
is unavailable.
Change-Id: Ifae51e457e5718be610c0a0914b18fe35ea7b008
Signed-off-by: Bryan Donlan <bdonlan@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Compute how much disk IO a DfsReader is performing, and how long the
sum of those operations took on this reader instance. Implementations
of DFS and interested applications can get the stats by calling the
new DfsReader.getIoStats() method at or after close().
Change-Id: If585741301f29182617933d6406d4a70497f2ca7
The API exception should have the same javadoc like the internal
exception org.eclipse.jgit.errors.TooLargeObjectInPackException
Change-Id: Ia7508c77609e53c8e808412ac523a93194648e49
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Commit db77610 ensured that all refs/tags commits are added to the
primary GC pack. It did that by adding all of the refs/tags commits
to the primary GC pack PackWriter's "interesting" object set.
Unfortunately, all commit objects in the "interesting" set are
selected as commits for which bitmap indices will be built. In a
repository like chromium with lots of tags, this changed the number of
bitmaps created from <700 to >10000. That puts huge memory pressure on
the GC task.
This change restores the original behavior of ignoring tags when
selecting commits for bitmaps.
In the "uninteresting" set, commits for refs/heads and refs/tags for
unannotated tags can not be differentiated. We instead identify
refs/tags commits by passing their ObjectIds as a new "noBitmaps"
parameter to the PackWriter.preparePack() methods.
PackWriterBitmapPreparer.setupTipCommitBitmaps() can then use that
"noBitmaps" parameter to exclude those commits.
Change-Id: Icd287c6b04fc1e48de773033fe432a9b0e904ac5
Signed-off-by: Terry Parker <tparker@google.com>
CloneCommand.call() has three stages: preparation, then the actual
clone (init/fetch), and finally maybe checking out the working
directory.
Restructure such that if we fail or are cancelled during the actual
clone (middle phase), we do clean up the disk again. This prevents
leaving behind a partial clone in an inconsistent state: either we
have a fully successfully built clone, or nothing at all.
Bug: 516303
Change-Id: I9b18c60f8f99816d42a3deb7d4a33a9f22eeb709
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
DirCacheCheckout is generating names for temporary files. It was not checking
the length of this filenames. It may happen that a generated filename is
longer than 255 chars which causes problems on certain platforms. Make sure
that filenames for temporary files do not exceed 255 chars.
Bug: 508823
Change-Id: I9475c04351ce3faebdc6ad40ea4faa3c326815f4
The ObjectWalker in PackWriterBitmapWalker needs to be reset whenever it
starts a new walk. Move this responsibility from the caller to the
method when the new walk starts.
Change-Id: Ib66003be1b5bdc80f46b9bbbb17d45e616714912
Signed-off-by: Zhen Chen <czhen@google.com>
Some repository topologies can cause carryOntoHistory to overflow the
thread stack, due to its strategy of recursing into the 2nd+ parents
of a merge commit. This can easily happen if a project maintains a
local fork, and frequently pulls from the upstream repository, which
itself may have a branchy history.
Rewrite the carryOntoHistory algorithm to use a fixed amount of thread
stack, pushing the save points onto the heap. By using heap space the
thread stack depth is no longer a concern. Repositories are instead
limited by available memory.
The algorithm is now structured as two loops:
carryOntoHistory: This outer loop pops saved commits off the top of
the stack, allowing the inner loop algorithm to dive down that path
and carry bits onto commits along that part of the graph. The loop
ends when there are no more stack elements.
carryOntoHistoryInner: The inner loop walks along a single path of
the graph. For a string of pearls (commits with one parent each)
r <- s <- t <- u
the algorithm walks backwards from u to r by iteratively updating
its local variable 'c'. This avoids heap allocation along a simple
path that does not require remembering state.
The inner loop breaks in the HAVE_ALL case, when all bits have been
found to be previously set on the commit. This occurs when a prior
iteration of the outer loop (carryOntoHistory) explored a different
path to this same commit, and copied the bits onto it.
When the inner loop encounters a merge commit, it pushes all parents
onto the heap based stack by allocating individual CarryStack
elements for each parent. Parents are pushed in order, allowing
side branches to be explored first.
A small optimization is taken for the last parent, avoiding pushing
it and instead updating 'c', allowing the side branch to be entered
without allocating a CarryStack.
Change-Id: Ib7b67d90f141c497fbdc61a31b0caa832e4b3c04
Add the --recurse-submodules option on the command, which causes
submodules to also be initialized and updated.
Add a callback interface on CloneCommand and SubmoduleUpdateCommand to
them to provide progress feedback for clone operations.
Change-Id: I41b1668bc0d0bdfa46a9a89882c9657ea3063fc1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Delete the condition to check whether the garbage pack creation time
is older than the last GC operation, because it's not possible to
find the last GC operation time when there is no GC pack.
Add additional tests to make sure the contents of the expired garbage
packs are considered during the GC operation and any actively
referenced objects from the garbage packs are copied successfully
into the GC pack before deleting the garbage pack.
Change-Id: I09e8b2656de8ba7f9b996724ad1961d908e937b6
Signed-off-by: Thirumala Reddy Mutchukota <thirumala@google.com>
It is quite common to want to parse a commit without already having a
RevWalk. Provide a shortcut to do so to make it more convenient, and to
ensure that the RevWalk is released afterwards.
Signed-off-by: Martin Fick<mfick@codeaurora.org>
Change-Id: I9528e80063122ac318f115900422a24ae49a920e
Android wants them to work, and we're only interested in them for bare
repos, so add them just for that.
Make sure to use symlinks instead of just using the copyfile
implementation. Some scripts look up where they're actually located in
order to find related files, so they need the link back to their
project.
Change-Id: I929b69b2505f03036f69e25a55daf93842871f30
Signed-off-by: Dan Willemsen <dwillemsen@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jeff Gaston <jeffrygaston@google.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Because objects described by the client using "have" lines do not need
to be reachable by any ref on the server, it is possible for them to
point to missing objects in the reachability graph. When such an
object is encountered, I1097a2defa4a9dcf502ca8baca5d32880378818f (Only
throw MissingObjectException when necessary, 2017-03-29) aborts the
"have" walk early to salvage the fetch. The downside of that change
is that remaining "have"s are ignored unless they pointed directly to
an object with a bitmap. In the worst case this can increase the
bandwidth cost of a fetch to the cost of a clone because most "have"s
are ignored.
Avoid this cost by bypassing the failed "have" completely and moving
on to the remaining "have"s.
Change-Id: Iac236b6d05f735078c9935abfa6e58d1eb47f388
When looping through alternates, prevent visiting the same object
directory twice. This could happen when the objects/info/alternates file
includes itself directly or indirectly via a another repo and its
alternates file.
Change-Id: I79bb3da099ebc3c262d2e6c61ed4578eb1aa3474
Signed-off-by: James Melvin <jmelvin@codeaurora.org>
Signed-off-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Generating the src list with an unrestricted wildcard causes all
files in the source tree to be included. This results in junk files
such as .orig (generated during merge conflict resolution) to be
included, which causes in a build error:
in srcs attribute of java_library rule //org.eclipse.jgit:jgit:
file '//org.eclipse.jgit:src/org/eclipse/jgit/gitrepo/RepoCommand.java.orig'
is misplaced here (expected .java, .srcjar or .properties).
Modify the globs to only include Java source files.
Change-Id: Iaef3db33ac71d71047cd28acb0378e15cb09ece9
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This is necessary for deploying submodules on android.googlesource.com.
* Allow an empty base URL. This is useful if the 'fetch' field is "."
and all names are relative to some host root.
* The URLs in the resulting superproject are relative to the
superproject's URL. Add RepoCommand#setDestinationURI to
set this. If unset, the existing behavior is maintained.
* Add two tests for the Android and Gerrit case, checking the URL
format in .gitmodules; the tests use a custom RemoteReader which is
representative of the use of this class in Gerrit's Supermanifest
plugin.
Change-Id: Ia75530226120d75aa0017c5410fd65d0563e91b
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.7:
Cleanup and test trailing slash handling in ManifestParser
ManifestParser: Throw exception if remote does not have fetch attribute
Change-Id: Ia9dc3110bcbdae05175851ce647ffd11c542f4c0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This is a workaround for
https://bugs.openjdk.java.net/browse/JDK-4666701.
Change-Id: Idd04657e8d95a841d72230f8881b6b899daadbc2
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In the repo manifest documentation [1] the fetch attribute is marked
as "#REQUIRED".
If the fetch attribute is not specified, this would previously result in
NullPointerException. Throw a SAXException instead.
[1] https://gerrit.googlesource.com/git-repo/+/master/docs/manifest-format.txt
Change-Id: Ib8ed8cee6074fe6bf8f9ac6fc7a1664a547d2d49
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
OSGi semantic versioning rules allow to break implementors of an API in
a minor version.
Change-Id: I4ada3e6455e8e8e1bb8fb71affa0a1b36bd46fc4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Shawn Pearce