If LsRemoteCommand is used without repository, the remote URI was not
translated. If the git user config contains e.g.
[url "ssh://git@github.com/"]
insteadOf = https://github.com/
and LsRemoteCommand is called with an HTTPS GitHub repository URL, the
command should actually rewrite this to an SSH URI and use the SSH
transport.
Actually this same problem may exist everywhere Transport is used with
an URIish instead of with a remote name. However, doing this translation
in Transport.open(URIish) and in Transport.open(Repository, URIish,
String) if no remote name is given would change the behavior and might
break assumptions made in existing clients. For instance, EGit's
PushOperation assumes that the URI obtained from PushResult.getURI()
was the same as was passed in to Transport.open(Repository, URIish).
URIs obtained from a RemoteConfig have this translation applied
transparently, and in Transport we cannot know for sure whether or
not a URI has already been translated, if needed. So doing this in
Transport might also lead to translating URIs twice.
Therefore this commit does the translation in LsRemoteCommand, where
we can be sure that it won't affect other use cases. If other cases
besides LsRemoteCommand are found where such a URI translation is
missing, it'll have to be done at higher levels, possibly even in
client code directly.
Bug: 544769
Change-Id: I5df54a925d30b55d98e21f37f2851fe79649b064
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-6.1:
Prepare 6.1.1-SNAPSHOT builds
JGit v6.1.0.202203080745-r
[checkout] Use .gitattributes from the commit to be checked out
Don't use final for method parameters
[push] support the "matching" RefSpecs ":" and "+:"
[push] Call the pre-push hook later in the push process
IndexDiff: use tree filter also for SubmoduleWalk
Run license check with option -Ddash.projectId=technology.jgit
Exclude transitive dependencies of sshd-sftp
Update DEPENDENCIES for 6.1.0 release
Add dependency to dash-licenses
Fix typos of some keys in LfsText
Sort LfsText entries alphabetically
Support for "lfs.url" from ".lfsconfig"
Change-Id: I1b9f0c0ed647837e00b9640d235dbfab2329c5a6
JGit used only one set of attributes constructed from the global and
info attributes, plus the attributes from working tree, index, and
HEAD.
These attributes must be used to determine whether the working tree is
dirty.
But for actually checking out a file, one must use the attributes from
global, info, and *the commit to be checked out*. Otherwise one may not
pick up definitions that are only in the .gitattributes of the commit
to be checked out or that are changed in that commit with respect to
the attributes currently in HEAD, the index, or the working tree.
Maintain in TreeWalk different Attributes per tree, and add operations
to determine EOL handling and smudge filters per tree.
Use the new methods in DirCacheCheckout and ResolveMerger. Note that
merging in JGit actually used the attributes from the base, not those
from ours, which looks dubious at least. It now uses those from ours,
and for checking out the ones from theirs.
The canBeContentMerged() determination was also done from the base
attributes, and is newly done from the ours attributes. Possibly this
should take into account all three attributes, and only if all three
agree the item can be content merged, a content merge should be
attempted? (What if the binary/text setting changes between base, ours,
or theirs?)
Also note that JGit attempts to perform content merges on non-binary
LFS files; there it used the filter attribute from base, too, even for
the ours and theirs versions. Newly it takes the filter attribute from
the correct tree. I'm not convinced doing content merges on potentially
huge files like LFS files is really a good idea.
Add tests in FilterCommandsTest and LfsGitTest to verify the behavior.
Open question: using index and working tree as fallback for the
attributes of ours (assuming it is HEAD) is OK. But does it also make
sense for base and theirs in merging?
Bug: 578707
Change-Id: I0bf433e9e3eb28479b6272e17c0666e175e67d08
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The implementation of push.default=matching was not correct.
It used the RefSpec "refs/heads/*:refs/heads/*", which would push
_all_ local branches. But "matching" must push only those local
branches for which a remote branch with the same name already exists
at the remote.
This RefSpec can be expanded only once the advertisement from the
remote has been received.
Enhance RefSpec so that ":" and "+:" can be represented. Introduce a
special RemoteRefUpdate for such a RefSpec; it must carry through the
fetch RefSpecs to be able to fill in the remote tracking updates as
needed. Implement the expansion in PushProcess.
Bug: 353405
Change-Id: I54a4bfbb0a6a7d77b9128bf4a9c951d6586c3df4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Call the pre-push hook only after having received the remote
advertisement and having determined rejections, like C git does.
Also similar to C git, don't pass rejected or up-to-date updates
to the pre-push hook.
Bug: 578852
Change-Id: I51d379ea7bd8234ec815f8f4a9fa325816f476cf
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The only uses of IndexDiff.setFilter() in JGit and EGit set a path
filter. Passing the filter on to the SubmoduleWalk gives the desired
result, which is consistent with command-line git.
Bug: 565251
Change-Id: I8eca1ed73eb1d237b8785f369352f72af9e0e168
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If core.abbrev is unset or "auto" estimate abbreviation length like C
git does:
- Estimate repository's object count by only considering packed objects,
round up to next power of 2
- With the order of 2^len objects, we expect a collision at 2^(len/2).
But we also care about hex chars, not bits, and there are 4 bits per
hex. So all together we need to divide by 2; but we also want to round
odd numbers up, hence adding one before dividing.
- For small repos use at least 7 hexdigits
- If object database fails to determine object count use 7 hexdigits as
fallback
If it is set to "no" do not abbreviate object-ids.
Otherwise set it to the configured value capped to the range between 4
and length of an unabbreviated object-id.
Change-Id: I425f9724b69813dbb57872466bf2d2e1d6dc72c6
Error Prone is flagging Date-API as obsolete and recommends to migrate
to Instant and LocalDate. Given that more JGit users starting to migrate
to new Time API, offer ctors that accept Instant type and also add new
getter that returns when attribute as Instant type.
Change-Id: I64a36bf40f191495c6889c1dff314ede06848880
potentiallyUnclosedCloseable currently is not checked and it creates
a warning when compiling with Maven.
Change-Id: I0715ead433270937f77f56a19aa203f8d6f5322f
The following warning was raised by Eclipse:
"At least one of the problems in category
'unused' is not analysed due to a compiler option being ignored"
The org.eclipse.jdt.core.compiler.problem.unusedTypeParameter compiler
option is set to ignore, hence the warning suppression is redundant.
Change-Id: I5fd6efc9968be133c71e95c53803c44310d75e85
Add ConfigConstants and expose branch.<name>.pushRemote in the
BranchConfig. Use the branch configuration and remote.pushDefault
if no remote is given explicitly. If nothing is configured, fall
back to "origin".
Bug: 578676
Change-Id: I6bb141ff02c8b04980ec34b26ef248b72614c3c9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When no RefSpecs are given, PushCommand until now simply fell back to
pushing the current branch to an upstream branch of the same name. This
corresponds to push.default=current. Any setting from the git config
for push.default was simply ignored.
Implement the other modes (nothing, matching, upstream, and simple),
too. Add a setter and getter for the PushDefault so that an application
can force a particular mode to be used. For backwards compatibility,
use "current" as the default setting; to figure out the value from the
git config, which defaults to "simple", call setPushDefault(null).
Bug: 351314
Change-Id: I86c5402318771e47d80b137e99947762e1150bb4
Signed-off-by: Rolf Theunissen <rolf.theunissen@gmail.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Enhance the (unused!?) PushConfig; include a PushDefault enumeration.
Add simple tests for this PushConfig.
Bug: 351314
Change-Id: Ibc5656a2a1fccf70d00c5e15de8ed3dd8add6337
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
BasePackConnection::readAdvertisedRefsImpl was creating an exception by
calling `noRepository`, and then blindly calling `initCause` on it. As
`noRepository` can be overridden, it's not guaranteed to be missing a
cause.
BasePackPushConnection overrides `noRepository` and initiates a fetch,
which may throw a `NoRemoteRepositoryException` with a cause.
In this case calling `initCause` threw an `IllegalStateException`.
In order to throw the correct exception, we now return the
BasePackPushConnection exception and suppress the one thrown by
BasePackConnection
Bug: 578511
Change-Id: Ic1018b214be1e83d895979ee6c7cbce3f6765f6f
Set the string encoding when converting a byte array into String,
avoiding the build-time warning on platform-dependent encoding.
See https://errorprone.info/bugpattern/DefaultCharset
Change-Id: I1f920043a8f303da43a8278793c38453e8773d69
Repository wasn't closed in FetchAndPullCommandsRecurseSubmodulesTest.
This caused a "Resource leak: 'g' is never closed" warning during
compilation.
Bug: 578546
Change-Id: I591ef1e286bcd9a7103c016fd47015e77fa95cbb
CancellableDigestOutputStream resources are never closed in the tests.
This causes a "Resource leak: 'out' is never closed" warning
at compile time.
Suppress it by using a try with resources.
Bug: 578544
Change-Id: I0dc7de9162b8e3ac6fcaabe3002423f545baddb8
JGit accumulated in MESSAGE_FIXUP commit messages of a fixup sequence,
just like it did in MESSAGE_SQUASH, and on the last step of a sequence
of fixups used that file, after stripping all comment lines, as the
commit message. That also stripped any lines from the original commit
message that happened to start with the comment character.
This is not how this is supposed to work. MESSAGE_FIXUP must contain
the original commit message of the base commit that is amended, and
the file contains the verbatim commit message for the final fixup.[1]
Change the implementation accordingly, and add new tests.
[1] https://github.com/git/git/blob/df3c41adeb/sequencer.c#L86 ff.
Bug: 513726
Change-Id: I885a2b7f10d6c74460a8693aa6cbf867ee0494a1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Reload the stack _before_ trying to delete the files. This ensures we
don't trip over our own open file handles when deleting compacted
tables.
If there is another process reading the file, it may be impossible to
delete the compacted tables. In this case, ignore the failure.
For cleaning the garbage in this case, the protocol as described in
https://www.git-scm.com/docs/reftable#_windows should be implemented.
This is left for another commit.
Bug: 578454
Change-Id: I7aa43508450041eb9376d9f67a0262ff7cc53c73
* changes:
RepoCommand: Offer to set extra files in the destination repository
RepoCommand: Move bare/regular superproject writing to their own classes
On Windows eol=native, which is also the default if nothing else
overrides it, means convert text files to CRLF on checkout.
Adapt tests for this. Also don't fiddle with the real system property
"line.separator", use the mocked SystemReader for this.
Bug: 550111
Change-Id: Ie19b80fc543fa4970d6d9f181041c5f4d6ef3ed4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Escape paths when writing them to a config file to ensure they work
with backslashes and unusual characters.
Bug: 550111
Change-Id: Iedc5c0f2c0c02ac6cadf43cdae0f0d19578aed91
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Ensure that this test works on Windows.
Bug: 550111
Change-Id: Ib3ca803f4d9521a5f2a0e1344bfbc0d2beccc9cc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
On Windows, java.io.File.canExecute is always true. Guard assertions
testing the executable bit with FS.DETECTED.supportsExecute().
Bug: 550111
Change-Id: I2704d122f5b1086d01a0503a8c047a02ecbc1d4a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
We want to save in the destination repository what manifest created its
structure. This helps to detect and debug failures in the manifest ->
superproject translations. The src commit should be easily readable from
the superproject tip.
Offer an API to write a file in the destination repository. RepoCommand
callers (e.g. gerrit supermanifest plugin) can use this to add a
file with the repo/ref/hash of the manifest.
Alternatives considered to write the source repo/ref/hash:
* .gitattributes of the .gitmodules file. Some updates in the manifest
don't touch the .gitmodules (e.g. a linkfile change), so it can fall
out of sync.
* commit message. Caller would need to follow the commit history to
find the latest modification by repo command. This is not helpful
e.g. for build bots that want to get the value in one call.
Change-Id: I113662734a7ccd39cbc60b46ad3f73038c807682
RepoCommand parses the manifest to get a list of projects, clears up
conflicts and then writes to the superproject. The first steps are
common but the writing is completely different for bare or "regular"
(with working dir) repository.
Split writing to bare and regular repos into its own classes. This
simplifies RepoCommand class and makes clearer what happens on each side
(e.g. many options apply only to bare repos).
Change-Id: I256e15729bd53ee15fc56de88bce86a2edb2417a
C git also does so. Note that currently the comment character is
hard-coded as the hash '#' throughout JGit.
Bug: 548529
Change-Id: I4a5597694082a9e5b07412b365cfaf41fa034cfa
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Use CommitConfig.CleanupMode to implement git commit --cleanup. Add
setters for the clean-up mode, the comment character, and for the
default default clean-up mode.
Behavior of existing client code is unchanged as the default clean-up
mode is set to "verbatim". To use git config defaults, one can call
setCleanupMode(CleanupMode.DEFAULT). The default comment character
is hard-coded as '#' for now, as in other parts of JGit. Implementing
full support for core.commentChar shall be done in a separate change.
Bug: 553065
Change-Id: I470785e464a762d3f409f163f1cbdbb98dd81aaf
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add an enumeration for the possible values, and a method to resolve the
"default" value. Give CommitConfig a static method to process a text
according to a given clean-up mode and comment character.
(The core.commentChar is not yet handled by JGit; it's hard-coded as #.)
Bug: 553065
Change-Id: If6e384522275f73b713fbc29ffcaa1753c239dea
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Fix tests failing on Windows because Repository instance is created but
not closed on tear down.
Fix repositories closed twice, except in tests that test this behavior
explicitly.
Name the temporary directories the tests run in after the test method;
that makes it easier to figure out in which tests repositories are
closed twice if it should occur again in the future.
Bug: 550111
Change-Id: I9398b58f0f36d2c29236d2a9a8599117d9083980
Signed-off-by: Nail Samatov <sanail@yandex.ru>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
With eol=native, we expect LF on Unixes, and CR-LF on Windows. One test
didn't account for this and always expected LF, and thus failed on
Windows.
Bug: 550111
Change-Id: I69354ac691c464d1b6003812ddb4510c5ab5e77a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Test.txt should not be in the "removed" list if it can't be deleted
but only in the "not deleted" list. The test was wrong.
Bug: 550111
Change-Id: I3ecede4278014c15015c8c24089647fa3db3742f
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Some tests checked whether or not a file is executable via
java.io.File.canExecute(). But that always returns true on Windows.
Use FS.DETECTED.canExecute() instead, and guard all such assertions to
run only of file systems that do support the "execute" flag.
Bug: 550111
Change-Id: Iacb9e414b612359fcecb61312c3dfb830801cd36
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The tests assumed that a path like "/tmp" was an absolute path, and
also compared against strings with forward slashes. On Windows, "/tmp"
is not an absolute path and thus resolved against the current directory,
and the separator is a backslash.
Change the tests to use ~/ notation, and test paths resolved against
the (mocked) user home directory. That way, the tests are independent
of the file system used.
Bug: 550111
Change-Id: I1c31608ca83c8d8586256d1586a792e4a33cfaa4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add parsing of the config. Implement the SSH agent protocol for adding
a key. In the pubkey authentication, add keys to the agent as soon as
they've been loaded successfully, before even attempting to use them
for authentication. OpenSSH does the same.
Bug: 577052
Change-Id: Id1c08d9676a74652256b22281c2f8fa0b6508fa6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
OpenSSH has (for legacy reasons?) the option of specifying the default
environment variable directly, instead of using ${SSH_AUTH_SOCK}. Make
sure the plain variable name is not taken as a relative path name.
Bug: 577053
Change-Id: If8f550dffc43887254f71aa0b487c50fa14d0627
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Handle the 'none' value, and change the value to select Pageant to
something that looks like an absolute UNC path name to avoid it's
handled as an relative path name.
Bug: 577053
Change-Id: I4ccf047abbc1def50e2782319e4fa7c744069401
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Checking the cancelled status and keeping a digest of the written data
is useful for other output streams. e.g. to write commit-graphs.
Pull up that functionality to a superclass, so it can be reused.
Change-Id: I177b50be09c4ea631e7a144cc6127085ec2ca411
Signed-off-by: kylezhao <kylezhao@tencent.com>
Enhance cache performance monitoring for large data such as pack and
bitmap indexes. Provide details about what is loaded and evicted from
cache like total number of cache hits, time in cache before eviction.
Add a custom consumer to report loading events and eviction events when
enabled.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: I5739325db7ff7ec370e4defd8f7e46f1c3f5d2dd
Move this test to another class and skip it when running tests with
bazel since the bazel test runner does not allow to create files in the
home directory.
FS#userHome retrieves the home directory on the first call and caches it
for subsequent calls to avoid overhead in case path translation is
required (currently on cygwin). This prevents that the test can mock the
home directory using MockSystemReader like SshTestHarness does.
Change-Id: I6a22f37f4a19eb4b4935509eae508a23e56db7aa
The fetch of a single orphan ref (for example Gerrit meta ref:
refs/changes/21/21/meta) did not stop the negotiation so client
had to advertise all refs. This impacts the fetch performance
on repositories with a large number of refs (for example on
Gerrit repository it takes 20 seconds to fetch meta ref
comparing to 1.2 second to fetch ref with parent).
To avoid this issue UploadPack, used on the server side,
now checks if all `want` refs have parents, if not this
means that client doesn't need any extra objects, hence
the server responds with `ready` and finishes the
negotiation phase.
Bug: 577937
Change-Id: Ia3001b400b415d5cf6aae45e72345ca08d3af058
* stable-6.0:
Use slf4j-simple instead of log4j for logging
Update orbit to R20211213173813
Change-Id: I746b7fb71571020ce49f7b50fd675c9864327719
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.13:
Use slf4j-simple instead of log4j for logging
Update orbit to R20211213173813
Change-Id: I219ef3901c1d908b91bf9c8f00431b22686ff7a5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
JGit uses slf4j-api as logging API.
The libraries
- org.eclipse.jgit.http.test
- org.eclipse.jgit.pgm
- org.eclipse.jgit.ssh.apache.test
- org.eclipse.jgit.test
used the outdated log4j 1.2.15 which is EOL since years.
Since both jgit command line and also the tests don't need sophisticated
logging features replace log4j with the much simpler slf4j-simple log
implementation. The org.slf4j.binding.simple 1.7.30 archive has only
25kB instead of 429kB for log4j 1.2.15
Applications using jgit are free to choose any other log implementation
supporting slf4j API.
Change-Id: I89e85cd3c76e954c3434622510975ce65dc227d4
FileBasedConfig should not rely on auto-detection of
the file-snapshot attribute computation based on config.
The check was already performed when a new FileBasedConfig
is created at L158:
// don't use config in this snapshot to avoid endless recursion
newSnapshot = FileSnapshot.saveNoConfig(getFile());
The check was missing though when the FileBasedConfig is saved
to disk and the new snapshot is obtained from the associated
LockFile.
This change fixes the issue by keeping a non-config based
FileSnapshot also after a FileBasedConfig is saved.
Bug: 577983
Change-Id: Id1e410ba687e683ff2b2643af31e1110b103b356
* stable-6.0:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
TreeRevFilter: fix wrong stop when the given path disappears
Change-Id: Id7540d03991cdcf6f405e946b8cbbcc6a9696a31
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.13:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
TreeRevFilter: fix wrong stop when the given path disappears
Change-Id: Ibd69e9d941ad9262b61dd0c4368e48cb82597a12
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When chgs[i] == adds[i], it indicated that a commit added some files
that pList[i] did not have, but didn't mean pList[i] is "empty tree
root".
Follow the example below:
. .
└── src └── src
└── d1 ==> └── d1
└─ file1 ├─ file1
└── file2
c.parents[i] c
The variable chg[i] equals to variable add[i],
but commit c.parents[i] is not "empty tree root".
We should add an additional check for no paths matching the filter.
Bug: 577227
Change-Id: I834e9ddd0de86b108b280a1139519ea962913b38
Signed-off-by: kylezhao <kylezhao@tencent.com>
Speed up bitmap creation by loading reverse index in parallel
to reading bitmap from storage. Latency changes from
(time_to_read_bitmap + time_to_load_reverse_index) to
max(time_to_read_bitmap, time_to_load_reverse_index).
Add new option to DfsReaderOptions to control parallel reverse index
loading. Static cached thread pool is added to PackBitmapIndexV1 for
reverse index loading, and when not in use consumes minimal resources.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: Ia37a1d739631d053e8bddb925ac8b0b81d22379e
Let GC#gc return collection of newly created packs as CompletableFuture
to enable using gc() asynchronously.
Change-Id: I3627014fd458c738cfe54225e631d6f7d9cfb1a7
* stable-6.0:
FS: debug logging only if system config file cannot be found
FS: debug logging only if system config file cannot be found
Update .factorypath used by annotation processor for benchmarks
Use maven-compiler-plugin's release tag instead of source and target
Don't use deprecated Repository#getAllRefs in Repository
Don't use deprecated Repository#getAllRefs in FileRepository
RevListTest: fix warning that method parameter hides field 'git'
Implement RecordingLogger based on org.slf4j.Logger
Let ObjectDatabase implement AutoClosable
Change-Id: Ie6b3cfa66b319033d4448dcf20362b753c0e9d7c
see: http://git-scm.com/docs/git-difftool
* add command line support for "jgit difftool"
* show supported commands with "jgit difftool --help"
* added "git difftool --tool-help" to show the tools (empty now)
* prepare for all other commands
Bug: 356832
Change-Id: Ice0c13ef7953a20feaf25e7746d62b94ff4e89e5
Signed-off-by: Andre Bossert <andre.bossert@siemens.com>
Signed-off-by: Simeon Andreev <simeon.danailov.andreev@gmail.com>
Also expose the potentially IOException thrown by RefDatabase#getRefs.
Hence the following methods now potentially throw IOException:
- AdvertiseRefsHook#advertiseRefs
- ReceivePack#setAdvertisedRefs
- Repository#getAdditionalHaves
Bug: 534731
Change-Id: I85bc6ce5815d40be5f80042c53f4663072d96be5
Provide a public interface PackLock exposing only the unlock() method.
Rename the internal PackLock class to PackLockImpl and have it implement
the new interface.
This way PackParser doesn't expose an internal class via its API
anymore, and client can still unlock pack locks that were created.
Bug: 576340
Change-Id: I976739f4ab28fe1f9ba7f35653a69a913aa68841
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Fixes an issue that commit template file could not be found if it has a
relative path instead of absolute path.
Relative path is probably common if git config --local is used.
Bug: 446355
Change-Id: I8ddf2be672647be825fd9c01af82809d31bb8356
With change https://git.eclipse.org/r/c/jgit/jgit/+/186455 a thread
loading a bitmap index could hold two ref locks at the same time (one
for bitmap and one for either index or reverse index). So it is possible
that two threads loading bitmaps end up in a deadlock for ref locks e.g.
threadA has refLock[1] (for bitmap) and wants refLock[2] (for index or
revIndex) and threadB has refLock[2] (for bitmap) and wants refLock[1].
This change introduces separate pools of locks per pack extension
instead of a shared pool. So threads loading bitmap can hold two
locks but with different extensions and no overlap, e.g. threadA holds
refLock[BITMAP_INDEX][1] and refLock[INDEX][2] and threadB holds
refLock[BITMAP_INDEX][2] and refLock[INDEX][1].
More unit tests were added to cover various paralell loading scenarios.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: I89704b4721c21548929608d3798ef60925280755
Bring our SSH config parser up-to-date with respect to changes in
OpenSSH. In particular, they fixed[1] the handling of line comments
such that #-characters inside strings are not considered. This means
that we have to parse strings with escaped quotes correctly.
[1] https://bugzilla.mindrot.org/show_bug.cgi?id=3288
Change-Id: Ifbd9014127e8d51e7c8792e237f3fc2a9a0719d2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This is a prerequisite for removing the JSch support bundle; otherwise
OpenSshConfigFile would be left without tests.
Copy OpenSshConfigTest from the JSch support bundle and adapt all tests
to perform the equivalent checks on OpenSshConfigFile directly. Add a
new lookupDefault() method to the SshConfigStore interface and implement
it so that it behaves the same and the tests work identically.
Change-Id: I046abd9197a8484003e77005024e5d973456f1a3
C git considers not only files containing NUL bytes as binary but also
files containing lone CRs. Implement this also for JGit.
C git additionally counts printable vs. non-printable characters and
considers files that have non_printable_count > printable_count / 128
also as binary. This is not implemented because such counting probably
only makes sense if one looks at the full file or blob content. The
Auto[CR]LF* streams in JGit look only at the first few KiB of a stream
in order not to buffer too much.
For the C git implementation, see [1].
[1] https://github.com/git/git/blob/7e27bd589d/convert.c#L35
Bug: 576971
Change-Id: Ia169b59bdbf1477f32ee2014eeb8406f81d4b1ab
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Move the code to parse numbers with an optional 'k', 'm', or 'g' suffix
from the config file handling to StringUtils. This enables me to re-use
it in EGit, which has duplicate code in StorageSizeFieldEditor.
As this is generally useful functionality, providing it in the library
makes sense.
Change-Id: I86e4f5f62e14f99b35726b198ba3bbf1669418d9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The various streams used in JGit for text/binary and CR-LF detection
used different buffer sizes. Most used 8000, but one used 8KiB, and one
used 8096 (SIC!) bytes.
Considering only the first 8kB of a file/blob is not sufficient; it
may give behavior incompatible with C git. C git considers the whole
blob; since it uses memory-mapped files it can do so with acceptable
performance. Doing this in JGit would most likely incur a noticeable
performance penalty. But 8kB is a bit small; in the file in bug 576971
the limit was hit before the first CR-LF, which occurred on line 155
at offset 9759 in the file.
Make RawText.FIRST_FEW_BYTES only a default and minimum setting, and
set it to 8KiB. Make the actual buffer size configurable: provide
static methods getBufferSize() and setBuffersize(), and use
getBufferSize() throughout instead of the constant.
This enables users of the JGit library to set their own possibly larger
buffer size.
Bug: 576971
Change-Id: I447762c9a5147a521f73d2864ba59ed89f555d54
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add tests for files having been checked in with mixed LF and CR-LF
line endings, and then being checked out with text or text=auto and
eol=lf or eol=crlf. These test cases were missing, and thus commit
efd1cc05 missed that AutoCRLFOutputStream needs the same detection
as AutoLFOutputStream.
Fix AutoCRLFOutputStream to not convert line endings if the blob in
the repository contains CR-LF.
Bug: 575393
Change-Id: Id0c7ae772e282097e95fddcd3f1f9d82aae31e43
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
JEP 400 (Java 18) will change the default character set to UTF-8
unconditionally.[1] Introduce SystemReader.getDefaultCharset() that
provides the locale-dependent charset the way JEP 400 recommends.
Change all code locations using Charset.defaultCharset() to use the
new SystemReader method instead.
[1] https://openjdk.java.net/jeps/400
Change-Id: I986f97a410d2fc70748b6f93228a2d45ff100b2c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This change is a fix to http://git.eclipse.org/r/c/jgit/jgit/+/183562
that was reverted in http://git.eclipse.org/r/c/jgit/jgit/+/184978
due to deadlocks. Separate locks in DfsBlockFile are removed to rely
on getting value from DfsBlockCache with region locking in place.
With this change bitmap index creation is not blocked on index and
reverse index full initialization in DfsPackFile. Now bitmap index
and index could be read from storage in parallel in separate threads.
A unit test is added for parallel index loading.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: Ic6d9c5a4a254628636aa98a5008447a27a003f69
* stable-5.13:
Fix missing peel-part in lsRefsV2 for loose annotated tags
Fix RevWalk.getMergedInto() ignores annotated tags
Optimize RevWalk.getMergedInto()
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Add org.bouncycastle.bcutil to p2 repository
Change-Id: I789e3c84045cc9dcd8a26de34d09fc1e3ccc41e7
* stable-5.12:
Fix missing peel-part in lsRefsV2 for loose annotated tags
Fix RevWalk.getMergedInto() ignores annotated tags
Optimize RevWalk.getMergedInto()
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: Ie5da8d2d07f39ab5aaeca560040637635d4eb04c
* stable-5.11:
Fix missing peel-part in lsRefsV2 for loose annotated tags
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I2122b3966bddb10d43d439eb8c5d6cc4583c6ba6
* stable-5.10:
Fix missing peel-part in lsRefsV2 for loose annotated tags
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I23ccb89306263ce042ce782d881812d4b5187672
* stable-5.9:
Fix missing peel-part in lsRefsV2 for loose annotated tags
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I4e7c7727ebfa9a7748477f2300bd66d775548ad6
We observed the following issue:
$ git tag -a v1.0 -m v1.0
$ git push origin tag v1.0
$ git ls-remote origin v1.0^{}
... empty result ...
On the server (Gerrit) side run git-gc to pack the refs:
$ git gc
Repeat the ls-remote from the client and the result is correct:
$ git ls-remote origin v1.0^{}
7ad85c810de3ae922903d4bdd17c53cd627260ba refs/tags/v1.0^{}
Unfortunately, the existing UploadPackTest didn't reveal this issue
although it provided the test case needed to do so: testV2LsRefsPeel.
This is because The UploadPackTest uses InMemoryRepository which
internally uses Dfs* implementations. The issue is only reproducible
when using the FileRepository.
It is a non-trivial task to refactor the UploadPackTest to work against
both InMemoryRepository and FileRepository and this change is not trying
to do that. This change creates a new test:
UploadPackLsRefsFileRepositoryTest and copies the necesssary code from
the UploadPackTest.
Change-Id: Icfc7d0ca63f1524bafe24c9626ce12ea72aa3718
Signed-off-by: Saša Živkov <sasa.zivkov@sap.com>
Let certain pack extensions that are expensive to load from storage
(e.g. pack index, bitmap index) stay in DFS block cache longer than
others by overriding default cache count through DfsBlockCacheConfig
Don't change default behavior when cache override map is empty. Use int
cacheCount instead of boolean hot for Ref<T>
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: I18062784ec9cc14dbba3e4bb8d9509440cf2d44f
If an annotated tag refers to a commit, we should not ignore it.
Change-Id: I77504f93636e9e984540e7d8535ef301adce6a80
Signed-off-by: kylezhao <kylezhao@tencent.com>
Transitive Relation Definition:
On the DAG of commit history, if A can reach B, C can reach A, then C
can reach B.
Example:
As is shown in the graph below:
1 - 2 - 3 - 4 (side)
\
5 - 6^ (master) - 7 (topic)
Find out which branches is 2 merged into:
After we calculated that master contains 2, we can mark 6 as TEMP_MARK
to avoid unwanted walks.
When we want to figure out if 2 is merge into the topic, the traversal
path would be [7, 6] instead of [7, 6, 5, 3, 2].
Test:
This change can significantly improve performance for tags.
On a copy of the Linux repository, the command 'git tag --contains
<commit>' had the following performance improvement:
commit | Before | After | Rel %
47a44d27ca | 29251ms | 6687ms | -77%
90327e7dff | 21388ms | 6256ms | -70%
f85fac0efa | 11150ms | 7338ms | -34%
The current version ignores tags, even though the tag is a type of
the ref.
Follow-up commits I'll fix it.
Change-Id: Ie6295ca4d16070499912af462239e679a97cce47
Signed-off-by: kylezhao <kylezhao@tencent.com>
Reviewed-by: Christian Halstrick <christian.halstrick@sap.com>
Reviewed-by: Martin Fick <mfick@codeaurora.org>
* stable-5.8:
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I9e66ef90dc9a65bac47b35705d679bf992bd72b9
* stable-5.7:
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I88c47ff57f4829baec5b19aad3d8d6bd21f31a86
* stable-5.6:
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I1c18f5f435f4a4a86e0548a310dbfc74191e1ed5
In Java 11 type arguments for anonymous subclasses can be inferred
and don't need to be specified. This resolves a number of compiler
warnings.
Change-Id: I55eff3babb7628aa0627085e65a1b45eb12c2cd3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
On Java 16 this test throws InaccessibleObjectException, handle and
ignore it similar to IllegalAccessException.
Change-Id: I19b4f577579694a146516861a7ec567141f3464b
This ensures the compiler compiles against the public, supported and
documented API for a specific VM version (here 11) [1]. This also means
that
we don't need EE descriptors in Eclipse anymore in order to ensure that
only supported APIs of the selected Java version can be used.
According to [2] if option --release is used --source and --target
options can't be used.
While we are at it also add default value for all new jdt core options
added in Eclipse 4.21.
[1] https://docs.oracle.com/en/java/javase/11/tools/javac.html
[2] https://docs.oracle.com/en/java/javase/14/docs/specs/man/javac.html#option-release
Change-Id: I852a5d7b0a3210751c15d79ec91915b4c01c41e2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The reftable format is a block based format, but allows for variably
sized blocks. This obviously happens for reflog blocks (which are zlib
compressed), but is also accepted for index blocks: In the spec, this
is motivated as
To achieve constant O(1) disk seeks for lookups the index must be
a single level, which is permitted to exceed the file's
configured block size, but not the format's max block size of
15.99 MiB.
Hence, when parsing a block, one cannot be sure of its exact size:
after reading a default-size block (eg. 4kb), the block header may
state that the block is in fact larger.
Before, the code would mark the block as `truncated`, noting
// Its OK during sequential scan for an index block to have been
// partially read and be truncated in-memory. This happens when
// the index block is larger than the file's blockSize. Caller
// will break out of its scan loop once it sees the blockType.
This looks like either
* a remnant of never-implemented functionality. There is no reason to
ever sequentially scan an index block.
* alluding to sequential scan of the data blocks before the index
blocks (eg. scanning refs, which ends when we find the first ref index
block, and we can then ignore the index block).
This comment is followed by code that populates the
restartTbl/restartCnt fields relative to the (possibly truncated)
buffer. If the buffer is truncated, this essentially reads garbage,
leading to OOB array access when using the index block.
Fix this by dropping the truncated logic and issuing a second read if
the first read was short.
Add a test.
We have never observed this failure scenario at Google. We use 64kb
blocksize, which requires us to need fewer index entries. The reftable
spec mentions an Android repo of size 36M. With 64kb blocks, that's
just 562 index entries. Even with historical growth, we are long from
requiring an index whose size exceeds a single block.
When adding the analogous test for seeking refs, there was no failure.
This points to another possibility which is that the code tries to
avoid writing large index blocks for refs.
I did not investigate further which one it is.
Fixes https://bugs.eclipse.org/bugs/show_bug.cgi?id=576250
Bug: 576250
Change-Id: I41ec21fac9e526ef57b3d6fb57b988bd353ee338
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Before, while trying to determine if an object ID was a tag or not,
the reftable conversion would yield an exception.
Change-Id: I3688a0ffa9e774ba27f320e3840ff8cada21ecf0
* master: (38 commits)
Revert "DFS block cache: Refactor to enable parallel index loading"
GitServlet: allow to override default error handlers
Silence API error for new interface method ProtocolV2Hook#onObjectInfo
transport: add object-info capability
Ignore IllegalStateException if JVM is already shutting down
Update orbit to R20210825222808 for 2021-09
Update spotbugs-maven-plugin to 4.3.0
Update ant to 1.10.11 also in pom.xml
DFS block cache: add additional stats to DfsReaderIoStats
Update Orbit to S20210817231813
[gpg] Better GPG home directory determination
FS: cleanup use of final modifier
Ensure FS#searchPath only selects executable files
RevWalk: getMergedInto's result is wrong on the second call
DFS block cache: Refactor to enable parallel index loading
[test] Create keystore with the keytool of the running JDK
[gpg] Update to Bouncy Castle 1.69
[test] Create keystore with the keytool of the running JDK
[sshd] Minor code clean-up
Support commit.template config property
...
Change-Id: I9f99e9a513a23c0c0d252334e79c351512d7355e
Sometimes it is useful to obtain metadata associated with an object
without the need to first download it locally. This is specially useful
when using partial clones.
This change implements the object-info capability that allows clients to
query the remote server for object metadata (currently only size). This
is a backport of the same capability that was recently added to the Git
project a2ba162cda (object-info: support for retrieving object info,
2021-04-20).
Signed-off-by: Bruno Albuquerque <bga@google.com>
Change-Id: I4dc9828e1c247f08b0976b8810be92d124366165
Make sure the future user can reset all UNINTERESTING commmits after
this operation.
Signed-off-by: kylezhao <kylezhao@tencent.com>
Change-Id: I7549b9ff67bd31acd5dfc92331cb9a30b47b8278
* stable-5.12:
[test] Create keystore with the keytool of the running JDK
Fix garbage collection failing to delete pack file
ReachabilityCheckerTestCase: fix reachable from self test case
Change-Id: I4b54f4850819736144edb784617ee902f491ffd6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.11:
[test] Create keystore with the keytool of the running JDK
ReachabilityCheckerTestCase: fix reachable from self test case
Change-Id: Ie8db450a1fad05bddb812a55b2ceb03b2805403a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.10:
[test] Create keystore with the keytool of the running JDK
ReachabilityCheckerTestCase: fix reachable from self test case
Change-Id: I55f4dd19e9fa3b789bd9a79d256fe9abb55ee7f4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.9:
[test] Create keystore with the keytool of the running JDK
ReachabilityCheckerTestCase: fix reachable from self test case
Change-Id: Ic37426211905d987ddd11480a54d95b86143c94c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.8:
[test] Create keystore with the keytool of the running JDK
ReachabilityCheckerTestCase: fix reachable from self test case
Change-Id: If09cbb877c674f15261715cecef7a2393bf66fa3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.7:
[test] Create keystore with the keytool of the running JDK
ReachabilityCheckerTestCase: fix reachable from self test case
Change-Id: I32010c6bf45d5138e17143d6c284ac56434eade1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.6:
[test] Create keystore with the keytool of the running JDK
ReachabilityCheckerTestCase: fix reachable from self test case
Change-Id: I1f6b4fc26f6ee6f22cc0aacd032c1e73ba246dbc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Adds functionality to read the git commit.template property. The
template content is read either via a default encoding or, if present,
via encoding specified by i18n.commitEncoding property.
Bug: 446355
Change-Id: I0c45db98e324ddff26a7e0262835f259d6528a86
Signed-off-by: Julian Ruppel <julian.ruppel@sap.com>
We currently cannot use hamcrest 2.2 and assertj 3.20.2 (which requires
hamcrest 2.2) in egit tests since other Eclipse dependencies (e.g.
swtbot) require hamcrest 1.1.
Hence relax version range for these components in jgit so that jgit
tests also work when using the egit target platform.
Change-Id: I521e2ec4491bd8d790609b8a66a8f14511a865a1
and update
- assertj to 3.20.2.v20210706-1104
- hamcrest to 2.2.0.v20210711-0821
- classes which were in org.hamcrest.core 1.3 and org.hamcrest.library
1.3 were all moved to org.hamcrest in 2.2
- the annotation org.hamcrest.Factory was removed and is no longer
needed
- junit 4.13 requires hamcrest-core and hamcrest-library 1.3 therefore
keep them in the target platform
CQ: 23501
Change-Id: Ife871c0343b611be9203aed7f86577e85bbf5c95
* master:
searchForReuse might impact performance in large repositories
Retry loose object read upon "Stale file handle" exception
Ignore missing javadoc in test bundles
Upgrade maven-dependency-plugin to 3.2.0
Upgrade jacoco-maven-plugin to 0.8.7
Upgrade maven-jxr-plugin to 3.1.1
Fix garbage collection failing to delete pack file
Fix PathSuffixFilter: can decide only on full paths
Update jetty to 9.4.42.v20210604
[sshd] Log the full KEX negotiation result
[releng] japicmp: update last release version
CONTRIBUTING: add explicit link to ECA
CONTRIBUTING: Use standard markdown format
Add Eclipse code of conduct and security policy
Change-Id: I9e31cb6e22f5398db6e220f71693e87475c598bd
The search for reuse phase for *all* the objects scans *all*
the packfiles, looking for the best candidate to serve back to the
client.
This can lead to an expensive operation when the number of
packfiles and objects is high.
Add parameter "pack.searchForReuseTimeout" to limit the time spent
on this search.
Change-Id: I54f5cddb6796fdc93ad9585c2ab4b44854fa6c48
When reading loose objects over NFS it is possible that the OS syscall
would fail with ESTALE errors: This happens when the open file
descriptor no longer refers to a valid file.
Notoriously it is possible to hit this scenario when git data is shared
among multiple clients, for example by multiple gerrit instances in HA.
If one of the two clients performs a GC operation that would cause the
packing and then the pruning of loose objects, the other client might
still hold a reference to those objects, which would cause an exception
to bubble up the stack.
The Linux NFS FAQ[1] (at point A.10), suggests that the proper way to
handle such ESTALE scenarios is to:
"[...] close the file or directory where the error occurred, and reopen
it so the NFS client can resolve the pathname again and retrieve the new
file handle."
In case of a stale file handle exception, we now attempt to read the
loose object again (up to 5 times), until we either succeed or encounter
a FileNotFoundException, in which case the search can continue to
Packfiles and alternates.
The limit of 5 provides an arbitrary upper bounds that is consistent to
the one chosen when handling stale file handles for packed-refs
files (see [2] for context).
[1] http://nfs.sourceforge.net/
[2] https://git.eclipse.org/r/c/jgit/jgit/+/54350
Bug: 573791
Change-Id: I9950002f772bbd8afeb9c6108391923be9d0ef51
On a subtree, a PathSuffixFilter must return -1 ("indeterminate"),
not 0 ("include"), otherwise negation goes wrong: an indeterminate
result (-1) is passed on, but a decision (0/1) is inverted.
As a result a negated PathSuffixFilter would skip all folders.
Bug: 574253
Change-Id: I27fe785c0d772392a5b5efe0a7b1c9cafcb6e566
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
From Git commit 9c1e657a8f:
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at
least one application wherein this is useful - push negotiation.
Therefore, make it possible for this negotiation step to be done
independently.
This feature is for protocol v2 only.
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for
the client to say "done". In practice, the client will never say it;
instead it will cease requests once it is satisfied.
Advertising the server capability option "wait-for-done" is behind the
transport config: uploadpack.advertisewaitfordone, which by default is
false.
Change-Id: I5ebd3e99ad76b8943597216e23ced2ed38eb5224
This is similar to change Idbc2c29bd that skipped detecting content
renames for large files. With this change, we added a new option in
RenameDetector called "skipContentRenamesForBinaryFiles", that when set,
causes binary files with any slight modification to be identified as
added/deleted. The default for this boolean is false, so preserving
current behaviour.
Change-Id: I4770b1f69c60b1037025ddd0940ba86df6047299
The "branch" field in the .gitmodules is the signal for gerrit to keep
the superproject autoupdated. Tags are immutable and there is no need to
track them, plus the cgit client requires the field to be a "remote
branch name" but not a tag.
Do not set the "branch" field if the revision is a tag. Keep those tags
in another field ("ref") as they help other tools to find the commit in
the destination repository.
We can still have false negatives when a refname is not fully qualified,
but this check covers e.g. the most common case in android.
Note that the javadoc of #setRecordRemoteBranch already mentions that
"submodules that request a tag will not have branch name recorded".
Change-Id: Ib1c321a4d3b7f8d51ca2ea204f72dc0cfed50c37
Signed-off-by: Ivan Frade <ifrade@google.com>
Check the last line of the last hunk of a file, not the last line of
the whole patch.
Note that C git only checks that this line starts with "\ " and is at
least 12 characters long because of possible different texts when non-
English messages are used.
Change-Id: I0db81699eb3e99ed7b536a3e2b8dc97df1f58a89
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
C git treats completely empty lines as empty context lines (which
traditionally have a single blank). Apparently newer GNU diff may
produce such lines; see [1]. ("Newer" meaning "since 2006"...)
[1] https://github.com/git/git/commit/b507b465f7831
Change-Id: I80c1f030edb17a46289b1dabf11a2648d2660d38
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Instead of converting the patch bytes to strings apply the patch on
byte level, like C git does. Converting the input lines and the hunk
lines from bytes to strings and then applying the patch based on
strings may give surprising results if a patch converts a text file
from one encoding to another. Moreover, in the end we don't know which
encoding to use to write the result.
Previous code just wrote the result as UTF-8, which forcibly changed
the encoding if the original input had some other encoding (even if the
patch had the same non-UTF-8 encoding). It was also wrong if the input
was UTF-8, and the patch should have changed the encoding to something
else.
So use ByteBuffers instead of Strings. This has the additional advantage
that all these ByteBuffers can share the underlying byte arrays of the
input and of the patch, so it also reduces memory consumption.
Change-Id: I450975f2ba0e7d0bec8973e3113cc2e7aea187ee
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Implement applying binary patches. Handles both literal and delta
patches. Note that C git also runs binary files through the clean
and smudge filters. Implement the same safeguards against corrupted
patches as in C git: require the full OIDs to be present in the patch
file, and apply a binary patch only if both pre- and post-image hashes
match.
Add tests for applying literal and delta patches.
Bug: 371725
Change-Id: I71dc214fe4145d7cc8e4769384fb78c7d0d6c220
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a new BinaryDeltaInputStream that applies a delta provided by
another InputStream to a given base. Because delta application needs
random access to the base, the base itself cannot be yet another
InputStream. But at least this enables streaming of the result.
Add a simple test using delta hunks generated by C git.
Bug: 371725
Change-Id: Ibd26fa2f49860737ad5c5387f7f4870d3e85e628
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add streams that can encode or decode git binary patch data on the fly.
Git writes binary patches base-85 encoded, at most 52 un-encoded bytes,
with the unencoded data length prefixed in a one-character encoding, and
suffixed with a newline character.
Add a test for both the new input and the output stream. The test
roundtrips binary data of different lengths in different ways.
Bug: 371725
Change-Id: Ic3faebaa4637520f5448b3d1acd78d5aaab3907a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add an implementation for base-85 encoding and decoding [1]. Git binary
patches use this format.
Base-85 encoding assembles bytes as 32-bit MSB values, then converts
these values to base-85 numbers (always 5 bytes) encoded as printable
ASCII characters. Decoding base-85 is the reverse operation. Note
that decoding may overflow on invalid input as 85^5 > 2^32. Encodings
always have a length that is a multiple of 5. If input length is not
divisible by 4, padding bytes are (logically) added, which are ignored
when decoding. The encoding for n bytes has thus always exactly length
(n + 3) / 4 * 5 in integer arithmetic (truncating division).
Includes tests.
[1] https://datatracker.ietf.org/doc/html/rfc1924
Bug: 371725
Change-Id: Ib5b9a503cd62cf70e080a4fb38c8cd1eeeaebcfe
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Update tests to record the number of events fired post-setup and only
assert for events fired during BatchRefUpdate.execute. For tests which
use writeLooseRef to setup refs, create new tests which assert the
number of RefsChangedEvent(s) rather than updating the existing ones
to call RefDirectory.exactRef as it changes the code path.
Change-Id: I0187811628d179d9c7e874c9bb8a7ddb44dd9df4
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Applying a patch on Windows failed if the patch had the (normal)
single-LF line endings, but the file on disk had the usual Windows
CR-LF line endings.
Git (and JGit) compute diffs on the git-internal blob, i.e., after
CR-LF transformation and clean filtering. Applying patches to files
directly is thus incorrect and may fail if CR-LF settings don't
match, or if clean/smudge filtering is involved.
Change ApplyCommand to run the file content through the check-in
filters before applying the patch, and run the result through the
check-out filters. This makes patch application succeed even if the
patch has single-LFs, but the file has CR-LF and core.autocrlf is
true.
Add tests for various combinations of line endings in the file and in
the patch, and a test to verify the clean/smudge handling.
See also [1].
Running the file though clean/smudge may give strange results with
LFS-managed files. JGit's DiffFormatter has some extra code and
applies the smudge filter again after having run the file through
the check-in filters (CR-LF and clean). So JGit can actually produce
a diff on LFS-managed files using the normal diff machinery. (If it
doesn't run out of memory, that is. After all, LFS is intended for
_large_ files.) How such a diff would be applied with either C git
or JGit is entirely unclear; neither has any code for this special
case. Compare also [2].
Note that C git just doesn't know about LFS and always diffs after
the check-in filter chain, so for LFS files, it'll produce a diff
of the LFS pointers.
[1] https://github.com/git/git/commit/c24f3abac
[2] https://github.com/git-lfs/git-lfs/issues/440
Bug: 571585
Change-Id: I8f71ff26313b5773ff1da612b0938ad2f18751f5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* master: (34 commits)
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
LockFile: create OutputStream only when needed
Add a cgit interoperability test for LockFile
Add TemporaryBuffer.toString(int limit)
LockFile: create OutputStream only when needed
Prepare 5.12.0-SNAPSHOT builds
JGit v5.12.0.202105051250-m2
Update jetty to 9.4.40.v20210413
[releng] Update eclipse-jarsigner-plugin to 1.3.1
Implement ours/theirs content conflict resolution
ssh: ensure list is modifiable before using Iterator.remove().
Update orbit to S20210406213021 and add 4.20-staging target
Fix typo in test method name
Allow file mode conflicts in virtual base commit on recursive merge.
sshd: don't lock the known_hosts files on reading
Allow info messages in UsernamePasswordCredentialsProvider
ssh config: do environment variable replacement
sshd: implement server-sig-algs SSH extension (client side)
Upgrade ecj to 3.25.0
...
Change-Id: Ibc39a9c4e431d15b67ab4a307241f47a7f3740a9
* stable-5.9:
LockFile: create OutputStream only when needed
Remove ReftableNumbersNotIncreasingException
Fix stamping to produce stable file timestamps
Change-Id: I056382d1d93f3e0a95838bdd1f0be89711c8a722
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git has different conflict resolution strategies:
* There is a tree merge strategy "ours" which just ignores any changes
from theirs ("-s ours"). JGit also has the mirror strategy "theirs"
ignoring any changes from "ours". (This doesn't exist in C git.)
Adapt StashApplyCommand and CherrypickCommand to be able to use those
tree merge strategies.
* For the resolve/recursive tree merge strategies, there are content
conflict resolution strategies "ours" and "theirs", which resolve
any conflict hunks by taking the "ours" or "theirs" hunk. In C git
those correspond to "-Xours" or -Xtheirs". Implement that in
MergeAlgorithm, and add API to set and pass through such a strategy
for resolving content conflicts.
* The "ours/theirs" content conflict resolution strategies also apply
for binary files. Handle these cases in ResolveMerger.
Note that the content conflict resolution strategies ("-X ours/theirs")
do _not_ apply to modify/delete or delete/modify conflicts. Such
conflicts are always reported as conflicts by C git. They do apply,
however, if one side completely clears a file's content.
Bug: 501111
Change-Id: I2c9c170c61c440a2ab9c387991e7a0c3ab960e07
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Similar to https://git.eclipse.org/r/c/jgit/jgit/+/175166, ignore
path that have conflicts on attributes, so that the virtual base could
be used by RecursiveMerger.
Change-Id: I99c95445a305558d55bbb9c9e97446caaf61c154
Signed-off-by: Marija Savtchouk <mariasavtchouk@google.com>
* master: (27 commits)
Optimize RevWalkUtils.findBranchesReachableFrom()
Introduce getMergedInto(RevCommit commit, Collection<Ref> refs)
Skip detecting content renames for large files
Remove unused API problem filters
Document http options supported by JGit
HTTP cookies: do tilde expansion on http.cookieFile
Prepare 5.12.0-SNAPSHOT builds
Update Orbit to R20210223232630
Prepare 5.11.1-SNAPSHOT builds
JGit v5.11.0.202103091610-r
Manually set status of jmh dependencies
Update DEPENDENCIES report for 5.11.0
Add dependency to dash-licenses
PackFile: Add id + ext based constructors
GC: deleteOrphans: Use PackFile
PackExt: Convert to Enum
Restore preserved packs during missing object seeks
Pack: Replace extensions bitset with bitmapIdx PackFile
PackDirectory: Use PackFile to ensure we find preserved packs
GC: Use PackFile to de-dup logic
...
Change-Id: I2326d4d728fbde3090a5b87b0e273db46e0c5f62
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In cases where we need to determine if a given commit is merged
into many refs, using isMergedInto(base, tip) for each ref would
cause multiple unwanted walks.
getMergedInto() marks the unreachable commits as uninteresting
which would then avoid walking that same path again.
Using the same api, also introduce isMergedIntoAny() and
isMergedIntoAll()
Change-Id: I65de9873dce67af9c415d1d236bf52d31b67e8fe
Signed-off-by: Adithya Chakilam <quic_achakila@quicinc.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There are two code paths for detecting renames: one on tree diffs
(using DiffFormatter#scan) and the other on single file diffs (using
DiffFormatter#format). The latter skips binary and large files
for rename detection - check [1], but the former doesn't.
This change skips content rename detection for the tree diffs case for
large files. This is essential to avoid expensive computations while
reading the file, especially for callers who don't want to pay that
cost. Content renames are those which involve files with slightly
modified content. Exact renames will still be identified.
The default threshold for file sizes is reused from
PackConfig.DEFAULT_BIG_FILE_THRESHOLD: 50 MB.
[1] 232876421d/org.eclipse.jgit/src/org/eclipse/jgit/diff/RawText.java (386)
Change-Id: Idbc2c29bd381c6e387185204638f76fda47df41e
Signed-off-by: Youssef Elghareeb <ghareeb@google.com>
Add new constructors to PackFile to improve a common use case where
callers know the directory, id, and extension, but previously needed to
construct a valid file name (with prefix, '.', etc) to create a
PackFile. Most callers can use the variant that has id as an ObjectId,
but provide an id as String variant too.
Change-Id: I39e4466abe8c9509f5916d5bfe675066570b8585
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Provide a recovery path for objects being referenced during the pack
pruning race. Due to the pack pruning race, it is possible for objects
to become referenced after a pack has been deemed safe to prune, but
before it actually gets pruned. If this happened previously, the newly
referenced objects would be missing and potentially result in a
corrupted ref.
Add the ability to recover from this situation when an object is missing
but happens to still be available in a pack in the "preserved"
directory. This is likely only useful when used in conjunction with the
--preserve-old-packs GC option, which prunes packs by hard-linking to
the preserved directory. If an object is missing and found in a pack in
the preserved directory, immediately recover that pack and its
associated files (idx, bitmaps...) by moving them back to the original
pack directory, and then retry the operation that would have failed due
to the missing object. This retry can now succeed and the repository
may avoid corruption. This approach should drastically reduce the
chance of a corrupt repository during pack pruning at very little extra
cost. This extra cost should only be incurred when objects are missing
and a failure would normally occur.
Change-Id: I2a704e3276b88cc892159d9bfe2455c6eec64252
Signed-off-by: Martin Fick <quic_mfick@quicinc.com>
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
The only extension that was ever consulted from the bitmap was the
bitmap index. We can simplify the Pack code as well as the code of
all the callers if we focus on just that usage.
Change-Id: I799ddfdee93142af67ce5081d14a430d36aa4c15
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
The PackFile class is intended to be a central place to do all
common pack filename manipulation and parsing to help reduce repeated
code and bugs. Use the PackFile class in the Pack class and in many
tests to ensure it works well in a variety of situations. Later changes
will expand use of PackFiles to even more areas.
Change-Id: I921b30f865759162bae46ddd2c6d669de06add4a
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A cookie file stores the expiration in seconds since the Linux Epoch,
not in milliseconds. Correct reading and writing cookie files; with
a backwards-compatibility hack to read files that contain a millisecond
timestamp.
Add a test, and fix tests not to rely on the actual current time so
that they will also run successfully after 2030-01-01 noon.
Bug: 571574
Change-Id: If3ba68391e574520701cdee119544eedc42a1ff2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* master: (143 commits)
Prepare 5.11.0-SNAPSHOT builds
JGit v5.11.0.202102240950-m3
[releng] japicmp: update last release version
IgnoreNode: include path to file for invalid .gitignore patterns
FastIgnoreRule: include bad pattern in log message
init: add config option to set default for the initial branch name
init: allow specifying the initial branch name for the new repository
Fail clone if initial branch doesn't exist in remote repository
GPG: fix reading unprotected old-format secret keys
Update Orbit to S20210216215844
Add missing bazel dependency for o.e.j.gpg.bc.test
GPG: handle extended private key format
dfs: handle short copies
[GPG] Provide a factory for the BouncyCastleGpgSigner
Fix boxing warnings
GPG: compute the keygrip to find a secret key
GPG signature verification via BouncyCastle
Post commit hook failure should not cause commit failure
Allow to define additional Hook classes outside JGit
GitHook: use default charset for output and error streams
...
Change-Id: I689f4070e79f4a0ac1c02b35698ccaab68ad2f34
We introduced the option --initial-branch=<branch-name> to allow
initializing a new repository with a different initial branch.
To allow users to override the initial branch name more permanently
(i.e. without having to specify the name manually for each 'git init'),
introduce the 'init.defaultBranch' option.
This option was added to git in 2.28.0.
See https://git-scm.com/docs/git-config#Documentation/git-config.txt-initdefaultBranch
Bug: 564794
Change-Id: I679b14057a54cd3d19e44460c4a5bd3a368ec848
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add option --initial-branch/-b to InitCommand and the CLI init command.
This is the first step to implement support for the new option
init.defaultBranch. Both were added to git in release 2.28.
See https://git-scm.com/docs/git-init#Documentation/git-init.txt--bltbranch-namegt
Bug: 564794
Change-Id: Ia383b3f90b5549db80f99b2310450a7faf6bce4c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Pack better represents the purpose of the object and paves the way to
add a PackFile object that extends File.
Change-Id: I39b4f697902d395e9b6df5e8ce53078ce72fcea3
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
If RecursiveMerger finds multiple base commits, it tries to compute
the virtual ancestor to use as a base for the three way merge.
Currently, the content conflicts between ancestors are ignored (file
staged with the conflict markers). If the path is a file in one ancestor
and a dir in the other, it results in NoMergeBaseException
(CONFLICTS_DURING_MERGE_BASE_CALCULATION).
Allow these conflicts by ignoring this unmerged path in the virtual
base. The merger will compute diff in the children instead and it
can be further fixed manually if needed.
Change-Id: Id59648ae1d6bdf300b26fff513c3204317b755ab
Signed-off-by: Marija Savtchouk <mariasavtchouk@google.com>
DateRevQueue is expected to give out the commits that have higher
commit time. But in case of tie(same commit time), it should give
the commit that is inserted first. This is inferred from the
testInsertTie test case written for DateRevQueue. Also that test
case, right now uses just two commits which caused it not to fail
with the current implementation, so added another commit to make
the test more robust.
By fixing the DateRevQueue, we would also match the behaviour of
LogCommand.addRange(c1,c2) with git log c1..c2. A test case for
the same is added to show that current behaviour is not the
expected one.
By fixing addRange(), the order in which commits are applied during
a rebase is altered. Rebase logic should have never depended upon
LogCommand.addRange() since the intended order of addRange() is not
the order a rebase should use. So, modify the RebaseCommand to use
RevWalk directly with TopoNonIntermixSortGenerator.
Add a new LogCommandTest.addRangeWithMerge() test case which creates
commits in the following order:
A - B - C - M
\ /
-D-
Using git 2.30.0, git log B..M outputs: M C D
LogCommand.addRange(B, M) without this fix outputs: M D C
LogCommand.addRange(B, M) with this fix outputs: M C D
Change-Id: I30cc3ba6c97f0960f64e9e021df96ff276f63db7
Signed-off-by: Adithya Chakilam <achakila@codeaurora.org>
This would run into an endless loop if the offset given was not zero.
Fix the logic to exit the read loop when the buffer is full.
Luckily all existing uses of this method call it only with offset zero.
Change-Id: I0ec2a4fb43efe4a605d06ac2e88cf155d50e2f1e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Reachability checkers are retrieved from RevWalk and ObjectWalk objects:
* RevWalk.createReachabilityChecker()
* ObjectWalk.createObjectReachabilityChecker()
Since RevWalks and ObjectWalks are themselves directly instantiated
in hundreds of places (e.g. UploadPack...) overriding them in a
consistent way requires overloading 100s of methods, which isn't
feasible. Moving reachability checker generation to a more central
place solves that problem.
The ObjectReader object seems a good place from which to get
reachability checkers, because reachability checkers return
information about relationships between objects. ObjectDatabases
delegate many operations to ObjectReaders, and reachability bitmaps
are attached to ObjectReaders.
The Bitmapped and Pedestrian reachability checker objects were
package private in the org.eclipse.jgit.revwalk package. This change
makes them public and moves them to the
org.eclipse.jgit.internal.revwalk package. Corresponding tests are
also moved.
Motivation:
1) Reachability checking algorithms need to scale. One of the
internal Android repositories has ~2.4 million refs/changes/*
references, causing bad long tail performance in reachability
checks.
2) Reachability check performance is impacted by repository
topography: number of refs, number of objects, amounts of
related vs. unrelated history.
3) Reachability check performance is also affected by per-branch
access (Gerrit branch permissions) since different users can
see different branches.
4) Reachability check performance isn't affected by any state in a
RevWalk or ObjectWalk.
I don't yet know if a single algorithm will work for all cases in #2
and #3. We may need to evolve the ReachabilityChecker interfaces
over time to solve the Gerrit branch permissions case, or use
Gerrit-specific identity information to solve that in an efficient
way.
This change takes the existing public API and moves it to the
ObjectReader/whole repository level, which is where we can do
consistent customizations for #2 and #3. We intend to upstream the
best of whatever works, but anticipate the need for multiple rounds
of experimentation.
Change-Id: I9185feff43551fb387957c436112d5250486833d
Signed-off-by: Terry Parker <tparker@google.com>
Different archive formats support a compression level in the range
[0-9]. The value 0 is for lowest compressions and 9 for highest. Highest
levels produce output files of smaller sizes but require more memory to
do the compression.
This change allows passing a "compression-level" option to the git
archive command and implements using it for different file formats.
Change-Id: I5758f691c37ba630dbac24db67bb7da827bbc8e1
Signed-off-by: Youssef Elghareeb <ghareeb@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* changes:
Compare getting all refs except specific refs with seek and with filter
Add getsRefsByPrefixWithSkips (excluding prefixes) to ReftableDatabase
Add seekPastPrefix method to RefCursor
We sometimes want to get all the refs except specific prefixes,
similarly to getRefsByPrefix that gets all the refs of a specific
prefix.
We now create a new method that gets all refs matching a prefix except a
set of specific prefixes.
One use-case is for Gerrit to be able to get all the refs except
refs/changes; in Gerrit we often have lots of refs/changes, but very
little other refs. Currently, to get all the refs except refs/changes we
need to get all the refs and then filter the refs/changes, which is very
inefficient. With this method, we can simply skip the unneeded prefix so
that we don't have to go over all the elements.
RefDirectory still uses the inefficient implementation, since there
isn't a simple way to use Refcursor to achieve the efficient
implementation (as done in ReftableDatabase).
Signed-off-by: Gal Paikin <paiking@google.com>
Change-Id: I8c5db581acdeb6698e3d3a2abde8da32f70c854c
This method will be used by the follow-up change. This useful if we want
to go over all the changes after a specific ref.
For example, the new method allows us to create a follow-up that would
go over all the refs until we reach a specific ref (e.g refs/changes/),
and then we use seekPastPrefix(refs/changes/) to read the rest of the refs,
thus basically we return all refs except a specific prefix.
When seeking past a prefix, the previous condition that created the
RefCursor still applies. E.g, if the cursor was created by
seekRefsWithPrefix, we can skip some refs but we will not return refs
that are not starting with this prefix.
Signed-off-by: Gal Paikin <paiking@google.com>
Change-Id: I2c02e89c877fe90da8619cb8a4a9a0c865f238ef
Heap always copied whole blocks, which leads to AIOOBEs. LocalFile
didn't overwrite the method and thus caused NPEs.
Change-Id: Ia37d4a875df9f25d4825e6bc95fed7f0dff42afb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (stateless protocol, simplified ACK handling,
delimiters, section headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. The SSH tests are much slower and much more
focused on the SSH protocol and SSH key handling. Factor out two
very simple cloning and pulling tests and make those run with
protocol V2.
Bug: 553083
Change-Id: I357c7f5daa7efb2872f1c64ee6f6d54229031ae1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If a file exists in head, merge, and the working tree, but not in
the index, and we're doing a force checkout, the checkout must be
an "update", not a "keep".
This is a follow-up on If3a9b9e60064459d187c7db04eb4471a72c6cece.
Bug: 569962
Change-Id: I59a7ac41898ddc1dd90e86b09b621a41fdf45667
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
We want complete control over clone behavior and don't want to use
Object's clone implementation.
Change-Id: I34a4e967f8aa3879c69a4978768bd35712c4105c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Path#getFileName can return null. Fix the warning by asserting the file
name isn't null.
Change-Id: I7f2fe75b46113d8be1d14e3f18dd77da27df25ed
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File#listFiles can return null. Use Files#list instead to fix the
problem.
Change-Id: I74e0b49aa6dae370219507c64aa43be4d8aa7b82
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Path#getParent can return null. Fix the warning by implementing a helper
method which asserts the parent is not null.
Change-Id: Ib4f8dff0674b74bc891f15f08bd9755c5ea728dc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File#listFiles can return null, assert it is not null to fix the
warning.
Change-Id: I28fc668fee760d39965e6e039003ac9f85fd461b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This was experimental code and never used in production.
Change-Id: Ia3da7f2b82d9e365cec2ccf9397cbc47439cd150
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Some clients may wish to allow NO_CHANGE lightweight tag updates
without setting the force flag. (For instance EGit does so.)
Command-line git does not allow this.
Propagate the RefUpdate result via the RefAlreadyExistsException.
That way a client has the possibility to catch it and check the
failure reason without having to parse the exception message, and
take appropriate action, like ignoring the exception on NO_CHANGE.
Change-Id: I60e7a15a3c309db4106cab87847a19b6d24866f6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
JGit treated a NO_CHANGE RefUpdate as an error in all cases. But when
updating a lightweight tag, this is a successful result if -f was
specified.
Change-Id: Iddfa6d6a6dc8bf8fed81138a008ebc32d5f960bd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add the two config constants from C git that can switch on signing
of annotated tags. Add them to the GpgConfig, and implement actually
signing a tag in TagCommand.
The interactions between command line options for "git tag" and config
options is a bit murky in C git. There are two config settings for it:
* tag.gpgSign is the main option, if set to true, it kicks in if
neither -s nor -u are given on the command line.
* tag.forceSignAnnotated signs only tags created via "git tag -m",
but only if command-line option "-a" is not present. It applies
even if tag.gpgSign is set explicitly to false.
Giving -s or -u on the command line also forces an annotated tag
since lightweight tags cannot be signed.
Bug: 386908
Change-Id: Ic8a1a44b5f12f47d5cdf3aae2456c1f6ca9ef057
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Factor out a common ObjectBuilder as super class of CommitBuilder
and TagBuilder, and make the GpgSigner work on ObjectBuilder.
In order not to break API, add the new method for signing an
ObjectBuilder in a new interface GpgObjectSigner.
The signature for a tag is just tacked onto the end of the tag
message. The message of a signed tag must end in LF.
Bug: 386908
Change-Id: I5e021e3c927f4051825cd7355b129113b949455e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Observed the error when trying to force checkout from a branch
that had no changes on it. When the 'keep()' method from 'DirCacheCheckout'
method was called the 'DirCacheEntry e' was null and was passed like
this to the 'checkoutEntry()' method where the 'getObjectId()' is
being called on the 'e' object
Change-Id: If3a9b9e60064459d187c7db04eb4471a72c6cece
Explicitly test that END and DELIM can be distinguished. If not, the
wire protocol V2 breaks down.
Bug: 568950
Change-Id: I5f3496168244303c68893f1c756831dd27440aeb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This would allow other JGit users to access and reuse the constants.
Change-Id: I1608802f45586af5f8582afa592e26679e9cebe3
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It seems Eclipse 4.18 reports them as error whereas earlier versions
ignored this maybe since we don't require javadoc comments for all the
test bundles.
Change-Id: I3f4d42ce681ea5c2b4b302991d2641290ac8561d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* master:
Remove unused imports
Silence API warnings
Remove erraneously merged source features
Add support for reading symrefs from pack capabilities
Prepare 5.3.9-SNAPSHOT builds
JGit v5.3.8.202011260953-r
Prepare 5.1.15-SNAPSHOT builds
JGit v5.1.14.202011251942-r
GC#deleteOrphans: log warning for deleted orphaned files
GC#deleteOrphans: handle failure to list files in pack directory
Ensure that GC#deleteOrphans respects pack lock
Prepare 5.10.0-SNAPSHOT builds
JGit v5.10.0.202011251205-m3
PacketLineIn: ensure that END != DELIM
Update Orbit to S20201118210000 and add target for 4.18
PacketLineIn: ensure that END != DELIM
PacketLineIn: ensure that END != DELIM
Allow to resolve a conflict by checking out a file
Update Orbit to I20201111205634
Document that setLastModified sets time of symlink target
Fix bug in PerformanceLogContext
Fix IOException occurring during gc
Prepare 5.10.0-SNAPSHOT builds
JGit v5.10.0.202011041322-m2
Revert "Client-side protocol V2 support for fetching"
Close Repository to fix tests failing on Windows
Client-side protocol V2 support for fetching
Update slf4j to 1.7.30
Update Orbit to S20201027182932 (2020-12 M2)
Fix formatting of config option values
Document options in core section supported by JGit
Ensure .gitmodules is loaded when accessing submodule name
Export new package org.eclipse.jgit.logging and import it where used
Ensure GC.deleteOrphans() can delete read-only orphaned files on Windows
Add new performance logging
Implement git describe --all
Compute time differences with Duration
Override config http.userAgent from environment GIT_HTTP_USER_AGENT
Upgrade spotbugs-maven-plugin to 4.1.3
Fix OperatorPrecedence warning flagged by error prone
UploadPackTest#testUploadRedundantBytes: ensure test repo is closed
ObjectDirectory#selectObjectRepresentation: fix formatting
Upgrade ecj to 3.23.0
Support "http.userAgent" and "http.extraHeader" from the git config
sshd: better error report when user cancels authentication
API filters for PackStatistics.Accumulator
Add TypedConfigGetter.getPath()
Make Javadoc consistent for PackStatistics fields
Measure time taken for reachability checks
Measure time taken for negotiation in protocol V2
IndexDiffFilter: handle path prefixes correctly
sshd: support the ProxyJump ssh config
Upgrade jacoco-maven-plugin to 0.8.6
ReceivePackStats: Add size and count of unnecessary pushed objects
Upgrade maven-project-info-reports-plugin to 3.1.1
Prepare 5.9.1-SNAPSHOT builds
JGit v5.9.0.202009080501-r
[releng] Enable japicmp for the fragments added in 5.8.0
GitlinkMergeTest: fix boxing warnings
Remove unused API problem filters
Add missing since tag on BundleWriter#addObjectsAsIs
SshdSession: close channel gracefully
GPG: include signer's user ID in the signature
jgit: Add DfsBundleWriter
Bump Bazel version to 3.5.0
Upgrade maven-resources-plugin to 3.2.0
Upgrade plexus-compiler version to 2.8.8
[bazel] Add missing dependency to slf4j-api
[errorprone] DirCacheEntry: make clear operator precedence
[errorprone] PackWriter#parallelDeltaSearch: avoid suppressed exception
[errorprone] Declare DirCache#version final
Add jgit-4.17-staging target platform for 2020-09
Update target platform to R20200831200620
Prepare 5.10.0-SNAPSHOT builds
Prepare 5.9.0-SNAPSHOT builds
ResolveMerger: do not content-merge gitlinks on del/mod conflicts
ResolveMerger: Adding test cases for GITLINK deletion
ResolveMerger: choose OURS on gitlink when ignoreConflicts
ResolveMerger: improving content merge readability
ResolveMerger: extracting createGitLinksMergeResult method
ResolveMerger: Adding test cases for GITLINK merge
JGit v5.9.0.202008260805-m3
Fix possible NegativeArraySizeException in PackIndexV1
FS: use binary search to determine filesystem timestamp resolution
Do not prematurely create directory of jgit's XDG config file
FS: write to JGit config in a background thread
FS: don't cache fallback if running in background
Keep line endings for text files committed with CR/LF on text=auto
Delay WindowCache statistics JMX MBean registration
[releng] Update plexus-compiler to 2.8.7
DirCache: support index V4
Update javadoc for RemoteSession and SshSessionFactory
Fix JSchProcess.waitFor() with time-out
sshd: work around a race condition in Apache MINA sshd 2.4.0/2.5.x
sshd: store per-session data on the sshd session object
FilterSpec: Use BigInteger.ZERO instead of valueOf(0)
Do not send empty blob in response to blob:none filter
Add support for tree filters when fetching
sshd: use PropertyResolver in test
FS_POSIX: avoid prompt to install the XCode tools on OS X
Remove dependency on JSch from SSH test framework
Use LinkedBlockingQueue for executor determining filesystem attributes
Update API warning filters
Remove unused imports
Bazel: Add workspace status command to stamp final artifact
DiffFormatter: correctly deal with tracked files in ignored folders
Prepare 5.8.2-SNAPSHOT builds
JGit v5.8.1.202007141445-r
Update Jetty to 9.4.30.v20200611
Fix writing GPG signatures with trailing newline
Rename a test method
Add a test for upstream bug SSHD-1028
Improve error message when receive.maxCommandBytes is exceeded
LfsConnectionFactory#getLfsUrl: Fix unconditional break in for-loop
DiffFormatterTest: Add a test to confirm the default rename detection settings
Upgrade maven-site-plugin to 3.9.1
Upgrade build-helper-maven-plugin to 3.2.0
Upgrade spotbugs to 4.0.4
MergedReftable: Include the last reftable in determining minUpdateIndex
Add new osgi fragments to maven-central deploy scripts
PackBitmapIndex: Not buffer inflated bitmap during bitmap creation.
Do not require org.assertj.core.annotations
Upgrade ecj to 3.22.0
Remove workaround for signing jars using Tycho plugins
Use https for URL of jgit website
Fix CI information in pom.xml
Use gitiles as scm url in pom.xml for browsing source code
Update API baseline to 5.8.0.202006091008-r
Remove trailing whitespace
Change-Id: Ie6bc6954741a47cfbd32c0886bdbd7b594f08b31
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A SymbolicRef is added to the advertised refs for any symref in
capabilities whose target is an advertised ref; this may replace an
existing entry, such as HEAD.
When cloning, if any advertised HEAD is symbolic then use the target
rather than looking for an advertised ref with a matching objectId.
Add --symref option to LsRemote command.
Bug: 514052
Change-Id: Idfb48e6f6e8dcfe57a6896883fe6d84d533aa9d0
Signed-off-by: Lee Worrall <worrall.la@gmail.com>
If pack or index files are guarded by a pack lock (.keep file)
deleteOrphans() should not touch the respective files protected by the
lock file. Otherwise it may interfere with PackInserter concurrently
inserting a new pack file and its index.
The problem was caused by the following race.
All mentioned files are located in "objects/pack/".
File endings relevant in "pack" dir:
.pack
.keep
.idx
.bitmap
When ReceivePack receives a pack file it executes the following steps:
ReceivePack.service():
receivePackAndCheckConnectivity():
receivePack():
receive the pack
parse the pack, returns packLock (.keep file)
PackInserter.flush():
write tmpPck file: "insert_<random>.pack"
write tmpIdx file: "insert_<random>.idx"
real pack name: "pack-<SHA1>.pack"
real index name: "pack-<SHA1>.idx"
atomic rename tmpPack to realPack
atomic rename tmpIdx to tmpIdx
execute commands
unlock pack by removing .keep file
trigger auto gc if enabled
When PackInserter.flush() renames the temporary pack to the final
"pack-xxx.pack" file the temporary pack index file "insert_xxx.idx"
has no matching .pack file with the same base name for a short interval.
If deleteOrphans() ran during that interval it deduced the pack index
file was orphaned. Subsequently the missing pack index caused
MissingObjectExceptions since objects contained in the pack couldn't be
looked up anymore.
Bug: https://bugs.chromium.org/p/gerrit/issues/detail?id=13544
Change-Id: I559c81e4b1d7c487f92a751bd78b987d32c98719
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
DirCacheEditor unconditionally applied a PathEdit to all stages in the
index. This gives wrong results if one wants to check out a file from
some commit to resolve a conflict: JGit would update the working tree
file multiple times (once per stage), and set all stages to point to
the checked-out blob.
C git replaces the stages by the entry for the checked-out file.
To support this, add a DirCacheEntry.setStage() method so that
CheckoutCommand can force the stage to zero. In DirCacheEditor, keep
only the zero stage if the PathEdit re-set the stage.
Bug: 568038
Change-Id: Ic7c635bb5aaa06ffaaeed50bc5e45702c56fc6d1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
PerformanceLogContext threw NullPointerException when multiple threads
tried to add an event to the PerformanceLogContext. The cause for this
is that the ThreadLocal was initialized only in the class constructor
for the first thread; for subsequent threads it was null.
To fix this initialize eventRecords for each thread.
Change-Id: I18ef67dff8f0488e3ad28c9bbc18ce73d5168cf9
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix IOException occurring when calling
GC on a repository with absent objects/pack folder.
Change-Id: I5be1333a0726f4d7491afd25ddac85451686c30a
Signed-off-by: Nail Samatov <sanail@yandex.ru>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This problem occurred when calling SubmoduleWalk#getModuleName if the
first submodule processed has a name and a path which do not match
SubmoduleWalk#getModuleName returned the module path instead of the
module name. In order to fix this SubmoduleWalk#getModuleName needs to
ensure that the modules config is loaded.
Bug: 565776
Change-Id: I36ce1fbc64c4849f9d8e39864b825c6e28d344f8
Signed-off-by: John Dallaway <john@dallaway.org.uk>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add new performance logging to register events of type duration.
The proposed logging is similar to the performance logging
in OS Gerrit https://gerrit-review.googlesource.com/c/gerrit/+/225628:
a global Singleton (LoggingContext in Gerrit) is
collecting the performance logs in a thread-safe events list,
and at the end of the monitored command the list of events is
retrieved and written to a log, after which it is cleared.
What this patch does:
The main component is the Singleton (PerformanceLogContext), which
is used to collect the records (PerformanceLogRecord) in one place
(ThreadLocal eventsList) from anywhere using
PerformanceLogContext.getInstance().addEvent().
Reason why this change is needed:
The current monitoring in JGit has several issues:
1. git fetch and git push events are handled separately
(PackStatistics and ReceivedPackStatistics), with no unified way
of writing or reading the statistics.
2. PostUploadHook is only invoked on the event of sending the
pack, which means that the PackStatistics is not available for
the fetch requests that did not end with sending the pack
(negotiation requests).
3. The way the logs are created is different from the performance
log approach, so the long-running operations need to be collected
from both performance log (for JGit DFS overridden operations and
Gerrit operations) and gitlog (for JGit ones).
The proposed performance logging is going to solve the above
mentioned issues: it collects all of the performance logs in one
place, thus accounting for the commands that do not result in
sending a pack. The logs are compatible with the ones on Gerrit.
Moreover, the Singleton is accessible anywhere in the call stack,
which proved to be successful in other projects like Dapper
(https://research.google/pubs/pub36356/).
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Change-Id: Iabfe667a3412d8a9db94aabb0f39b57f43469c41
This enables jgit to use any refs in the refs/ namespace when describing
commits.
Signed-off-by: Jason Yeo <jasonyeo88@gmail.com>
Change-Id: I1fa22d1c39c0e2f5e4c2938c9751d8556494ac26
Validate the extra headers and log but otherwise ignore invalid
headers. An empty http.extraHeader starts the list afresh.
The http.userAgent is restricted to printable 7-bit ASCII, other
characters are replaced by '.'.
Moves a support method from the ssh.apache bundle to HttpSupport in
the main JGit bundle.
Bug:541500
Change-Id: Id2d8df12914e2cdbd936ff00dc824d8f871bd580
Signed-off-by: James Wynn <james@jameswynn.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Reason why this change is needed:
Getting this metric will help estimate how much time will be saved once
the reachability checks get optimized
What this patch does:
Measure time spent by requestValidator.checkWants() in parseWants() and save
it in an instance of PackStatistics.Accumulator.
Signed-off-by: Alexa Panfil <alexapizza@google.com>
Change-Id: Id7fe4016f96549d9511a2c24052dad93cfbb31a4
When comparing git directory paths to check whether one is a prefix
of another, one must add a slash to avoid false prefix matches when
one directory name is a prefix of another. The path "audio" is not
a prefix of the path "audio-new", but would be a prefix of a path
"audio/new".
Bug: 566799
Change-Id: I6f671ca043c7c2c6044eb05a71dc8cca8d0ee040
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Since there is no negotiation for a push, the client is probably sending
redundant objects and bytes which already exist in the server.
Add more metrics in the stats to quantify it. Duplicated size and number
to measure the size and the number of duplicated objects which should
not be pushed.
Change-Id: Iaacd4761ee9366a0a7ec4e26c508eff45c8744de
Signed-off-by: Yunjie Li <yunjieli@google.com>
* stable-5.9:
Prepare 5.9.1-SNAPSHOT builds
JGit v5.9.0.202009080501-r
[releng] Enable japicmp for the fragments added in 5.8.0
GitlinkMergeTest: fix boxing warnings
Remove unused API problem filters
Add missing since tag on BundleWriter#addObjectsAsIs
GPG: include signer's user ID in the signature
Change-Id: Iaa96f9228752540f446fc232a49f31a738fd8d30
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* master:
SshdSession: close channel gracefully
jgit: Add DfsBundleWriter
Prepare 5.10.0-SNAPSHOT builds
ResolveMerger: do not content-merge gitlinks on del/mod conflicts
ResolveMerger: Adding test cases for GITLINK deletion
ResolveMerger: choose OURS on gitlink when ignoreConflicts
ResolveMerger: improving content merge readability
ResolveMerger: extracting createGitLinksMergeResult method
ResolveMerger: Adding test cases for GITLINK merge
Back out the version change to 5.10.0-SNAPSHOT which was done on master
already.
Change-Id: I1a6b1f0b8f5773be47823d74f593d13b16a601d5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
DfsBundleWriter writes out the entire repository to a Git bundle file.
It packs all objects included in the packfile by concatenating all pack
files. This makes the bundle creation fast and cheap. Useful for backing
up a repository as-is.
Change-Id: Iee20e4b1ab45b2a178dde8c72093c0dd83f04805
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
* changes:
ResolveMerger: do not content-merge gitlinks on del/mod conflicts
ResolveMerger: Adding test cases for GITLINK deletion
ResolveMerger: choose OURS on gitlink when ignoreConflicts
ResolveMerger: improving content merge readability
ResolveMerger: extracting createGitLinksMergeResult method
ResolveMerger: Adding test cases for GITLINK merge
Previously ResolveMerger tried to make a fulltext merge entry in case
one of sides got deleted regardless of file mode. This is not
applicable for GITLINK type of entry. After this change it is
rendering appropriate merge result.
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: Ibdb4557bf8781bdb48bcee6529e37dc80582ed7e
Option ignoreConflicts is used when a caller want to create a virtual
commit and use it in a future merge (recursive merge) or show it on
UI (e.g. Gerrit). According to contract in case of ignoreConflicts
ResolveMerger should populate only stage 0 for entries with merge
conflicts as if there is no conflict. Current implementation breaks
this contract for cases when gitlink revision is ambiguous.
Therefore, always select 'ours' when we merge in ignoreConflicts mode.
This will satisfy the contract contract, so recursive merge can
succeed, however it is an arbitrary decision, so it is not guaranteed
to select best GITLINK in all cases.
GITLINK merging is a special case of recursive merge because of
limitations of GITLINK type of entry. It can't contain more than 1 sha-1
so jgit can't write merge conflicts in place like it can with a blob.
Ideally we could signal the conflict with a special value (like
'0000...'), but that must be supported by all tooling (git fsck, c-git)."
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: Id4e9bebc8e828f7a1ef9f83259159137df477d89
Add test cases which cover content-merge resolve logic.
Git clients try to agressively merge blobs by content, but GITLINK types
of entries can't be merged with each other or with blobs. This change
ensures all possible permutations which can trigger blob and GITLINK
content merge are covered.
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: I7e83a28a14d4d2f9e0ba2b1cffbf3224fb7f3fef
Due to an integer overflow bug, the current "Index file is too large
for jgit" check did not work properly and subsequently a
NegativeArraySizeException was raised.
Change-Id: I2736efb28987c29e56bc946563b7fa781898a94a
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Git never converts line endings if the version in the repository is a
text file with CR/LF and text=auto. See [1]: "When the file has been
committed with CRLF, no conversion is done."
Because the sentence just before is about converting line endings on
check-in, I had understood that in commit 60cf85a [2] to mean that no
conversion on check-in was to be done. However, as bug 565048 and a
code inspection of the C git code showed it really means no conversion
is done on check-in *or check-out*.
If the text attribute is not set but core.autocrlf = true, this is
the same as text=auto eol=crlf. C git does not convert on check-out
even on text=auto eol=lf if the index version is a text file with
CR/LF.
For check-in, one has to look at the intended target, which is done
in WorkingTreeIterator since commit 60cf85a. For check-out, it can
be done by looking at the source and can thus be done in the
AutoLFOutputStream.
Additionally, provide a constructor for AutoLFInputStream to do
the same; for cases where the equivalent of a check-out is done via
an input stream obtained from a blob. (EGit does that in its
GitBlobStorage for the Eclipse compare framework; it's more efficient
than using a TemporaryBuffer and DirCacheCheckout.getContent(), and
it avoids the need for a temporary file.)
Adapt existing tests, and add new checkout and merge tests to verify
the resulting files have the correct line endings.
EGit's GitBlobStorage will need to call the new version of
EolStreamTypeUtil.wrapInputStream().
[1] https://git-scm.com/docs/gitattributes#Documentation/gitattributes.txt-Settostringvalueauto
[2] https://git.eclipse.org/r/c/jgit/jgit/+/127324
Bug: 565048
Change-Id: If1282ef43e2abd00263541bd10a01fe1f5c619fc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Index format version 4 was introduced in C git in 2012. It's about
time that JGit can deal with it.
Version 4 added prefix path compression. Instead of writing the full
path for each index entry to disk, only the difference to the previous
entry's path is written: a variable-encoded int telling how many bytes
to remove from the previous entry's path to get the common prefix,
followed by the new suffix.
Also, cache entries in a version 4 index are not padded anymore.
Internally, version 3 and version 4 index entries are identical; it's
only the stored format that changes.
Implement this path compression, and make sure we write an index file
that we read previously in the same format. (Only changing from version
2 to version 3 if there are extended flags.)
Add support for the "feature.manyFiles" and the "index.version" git
configs, and honor them when writing a new index file.
Add tests, including a compatibility test that verifies that JGit can
read a version 4 index generated by C git and write an identical
version 4 index.
Bug: 565774
Change-Id: Id83241cf009e50f950eb42f8d56b834fb47da1ed
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If I create a repository containing an empty file and clone it
with
git clone --no-checkout --filter=blob:none \
https://url/of/repository
then I would expect no blobs to be transferred over the wire. Alas,
JGit rewrites filter=blob:none to filter=blob:limit=0, so if the
repository contains an empty file then the empty blob gets
transferred.
Fix it by teaching JGit about filters based on object type to
complement the existing filters based on object size. This prepares
us for other future filters such as object:none.
In particular, this means we do not need to look up the size of the
filtered blobs, which should speed up clones. Noticed by Anna
Pologova and Terry Parker.
Change-Id: Id4b234921a190c108d8be2c87f54dcbfa811602a
Signed-off-by: Jonathan Nieder <jrn@google.com>
Teach the FilterSpec serialization code about tree filters so they can
be communicated over the wire and understood by the server.
While we're here, harden the FilterSpec serialization code to throw
IllegalStateException if we encounter a FilterSpec that cannot be
expressed as a "filter" line. The only public API for creating a
Filterspec is to pass in a "filter" line to be parsed, so these should
not appear in practice.
Change-Id: I9664844059ffbc9c36eb829e2d860f198b9403a0
Signed-off-by: Jonathan Nieder <jrn@google.com>
In JGit 5.0, the FileTreeIterator was changed to skip ignored folders
by default. To catch tracked files inside ignored folders, the tree
walk needs to have a DirCacheIterator, and the FileTreeIterator has
to know about that DirCacheIterator via setDirCacheIterator(). (Or
the optimization has to be switched off explicitly via
setWalkIgnoredDirectories(true).)
Skipping ignored directories is an important optimization in some
cases, for instance in node.js/npm projects, where we'd otherwise
traverse the whole huge and deep hierarchy of the typically ignored
node_modules folder.
While all uses of WorkingTreeIterator in JGit had been adapted,
DiffFormatter was forgotten. To make it work correctly (again) also
for such cases, make it set up a WorkingTreeeIterator automatically,
and make sure the WorkingTreeSource can find such files, too. Also
pass the repository to the TreeWalks used inside the DiffFormatter
to pick up the correct attributes, filters, and line-ending settings.
Bug: 565081
Change-Id: Ie88ac81166dc396ba28b83313964c1712b6ca199
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make sure we don't produce a spurious empty line at the end.
Bug: 564428
Change-Id: Ib991d93fbd052baca65d32a7842f07f9ddeb8130
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The message "Too many commands" implies there is a hard limit on the
number of commands, which isn't the case. The limit is on the total
size of the received data, as explained in change I84317d396 which
introduced the configuration setting receive.maxCommandBytes:
shorter reference names allow for more commands, longer reference
names permit fewer commands per batch.
Change the message to:
Commands size exceeds limit defined in receive.maxCommandBytes
Change-Id: I678b78f919b2fec8f8058f3403f2541c26a5d00e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Add a test that confirms:
- No rename detector is initialized by default
- Rename detector is initialized after calling setDetectRenames(true)
- Rename limit and rename score have the default values 400 and
60, respectively. Note that there are no constants for these values
so the test hard codes them.
Change-Id: I327e2b348a40ef67d8a184e5ab09f4e9ab573e1c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
MergedReftable ignores the last reftable in the stack while calculating the
minUpdateIndex.
Update the loop indices to include all reftables in the minUpdateIndex
calculation, while skipping position 0 as it is read outside the loop.
Change-Id: I12d3e714581e93d178be79c02408a67ab2bd838e
Signed-off-by: Minh Thai <mthai@google.com>
* master:
SimpleMergeTest: Clean up code style
Prepare 5.8.1-SNAPSHOT builds
Handle Fragment-Host declaration when updating version
JGit v5.8.0.202006091008-r
Prepare 5.9.0-SNAPSHOT builds
Handle Fragment-Host declaration when updating version
Add benchmark for strategies how to move a file
Add getter for unpackErrorHandler in ReceivePack
Upgrade maven-project-info-reports-plugin to 3.1.0
Upgrade maven-shade-plugin to 3.2.4
ObjectDirectoryInserter: Open FileOutputStream in try-with-resource
ObjectDirectoryInserter: Remove redundant 'throws' declarations
ObjectDirectory: Further clean up insertUnpackedObject
Add Git#shutdown for releasing resources held by JGit process
ApplyCommand: use context lines to determine hunk location
GPG: don't prompt for a passphrase for unprotected keys
Fix typo in org.eclipse.jgit.ssh.jsch.test MANIFEST
Fix ProtectedMembersInFinalClass warning flagged by error prone
Use version range to define fragment host bundle version
ObjectDirectory: Explicitly handle NoSuchFileException
ObjectDirectory: Fail immediately when atomic move is not supported
Fix jgit packaging
Fix InvalidInlineTag error flagged by error prone
Fix BadComparable error flagged by error prone
Add tests for RawTextComparator.WS_IGNORE_CHANGE.hash()
Update Orbit to R20200529191137 for final Eclipse release 2020-06
Organize manifest of org.eclipse.jgit.pgm
Do not include log4j implementation in jgit
Decouple JSch from JGit Core
Decouple BouncyCastle from JGit Core
Verify that the user home directory is valid
WindowCache: conditional JMX setup
RawTextComparator.WS_IGNORE_CHANGE must not compare whitespace
Revert "PackBitmapIndex: Not buffer inflated bitmap in
BasePackBitmapIndex"
Update jetty to 9.4.28.v20200408
Add 4.16 staging target platform
In-memory SSH keys for the "no files" sshd tests
Builder API to configure SshdSessionFactories
TransportHttp: abort on time-out or on SocketException
Ignore core.eol if core.autocrlf=input
Attributes: fix handling of text=auto in combination with eol
Bazel: Remove superfluous dependencies flagged by unused_deps
Log stack trace if CachingKeyPairProvider hits unexpected exception
Update Orbit to S20200519202422 and ant to 1.10.8
Include full IssuerFingerprint in GPG signature
Bazel: Fix src_sha1 of bcpg-jdk15on
Suppress API error for new method
BitmapIndex.Bitmap#retrieveCompressed
Fix wrong @since tags added in dcb0265
PackBitmapIndex: Set distance threshold
PackBitmapIndex: Not buffer inflated bitmap in BasePackBitmapIndex
PackBitmapIndex: Remove convertedBitmaps in the Remapper
PackBitmapIndex: Reduce memory usage in GC
PackBitmapIndex: Add AddToBitmapWithCacheFilter class
PackBitmapIndex: Add util methods and builder to BitmapCommit
PackBitmapIndex: Move BitmapCommit to a top-level class
Refactor: Make retriveCompressed an method of the Bitmap class
Fix downloading LFS Object fails behind proxy
Allow for using custom s3 host with lfs server
ReceivePack: adding IterativeConnectivityChecker
Moving transport/internal -> internal/transport
Fix error occurring during checkout
Change-Id: Ic11286e16ed6a72c6372297b310336dd040689d1
If a hunk does not apply at the position stated in the hunk header
try to determine its position using the old lines (context and
deleted lines).
This is still a far cry from a full git apply: it doesn't do binary
patches, it doesn't handle git's whitespace options, and it's perhaps
not the fastest on big patches. C git hashes the lines and uses these
hashes to speed up matching hunks (and to do its whitespace magic).
Bug: 562348
Change-Id: Id0796bba059d84e648769d5896f497fde0b787dd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Motivation: JSch serves as 'default' implementations of the SSH
transport. If a client application does not use it then there is no need
to pull in this dependency.
Move the classes depending on JSch to an OSGi fragment extending the
org.eclipse.jgit bundle and keep them in the same package as before
since moving them to another package would break API. Defer moving them
to a separate package to the next major release.
Add a new feature org.eclipse.jgit.ssh.jsch feature to enable
installation. With that users can now decide which of the ssh client
integrations (JCraft JSch or Apache Mina SSHD) they want to install.
We will remove the JCraft JSch integration in a later step due to the
reasons discussed in bug 520927.
Bug: 553625
Change-Id: I5979c8a9dbbe878a2e8ac0fbfde7230059d74dc2
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Thomas Wolf