If the packer fails, still obtain the stats and make them available
to the logger and the caller. Failures can frequently happen when
a client disconnects in the middle of a pack stream. Server admins
may still want to examine the timing metrics from counting and
compressing phases.
Change-Id: Iceae4f68b5473f4223d85c9edfb57837fc818eed
In such case, we use the name attribute as the default value of path.
Change-Id: I53fa312d6b64c6eb2240f08af7d1d60cea99192a
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
uninteresting
Using the ObjectWalk and marking a commit as uninteresting didn't mark
its root tree as uninteresting. This caused the "missing tree ..."
error in Gerrit under special circumstances. For example, if the
patch-set 2 changes only the commit message then the patch-set 1
and patch-set 2 share the same root-tree:
ps1 -> o o <- ps2
\ /
o root-tree
The transported pack will contain the ps2 commit but not the root-tree
object.
When using the BaseReceivePack.setCheckReferencedObjectsAreReachable
JGit will check the reachability of all referenced objects not provided
in the transported pack. Since the ps1 was advertised it will properly
be marked as uninteresting. However, the root-tree was reachable because
the ObjectWalk.markUninteresting missed to mark it as uninteresting.
JGit was then rejecting the pack with the "missing tree ..." exception.
Gerrit-issue: https://code.google.com/p/gerrit/issues/detail?id=1582
Change-Id: Iff2de8810f14ca304e6655fc8debeb8f3e20712b
Signed-off-by: Saša Živkov <sasa.zivkov@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In Git 1.9 (5dbd767601 "support pushing from a shallow clone")
the git-core project intentionally broke the existing send-pack
protocol from shallow clients.
Shallow clients now transmit their shallow information during push,
ahead of the old-new command sequence. JGit must accept these lines
when presented.
To protect the server against clients sending partial history,
require the connectivity check when pushed to by a shallow client.
Change-Id: I46639366b0900052c376091e1688f07def44ab79
This matches what C Git does, see "stripped" in `man git-commit-tree`.
It also fixes the bug of the user where an user.email like "<>" would
show up as "<<>>" in EGit.
Bug: 439844
Change-Id: I567a3c620e191ce9d37d318417e63cb5d4483419
Signed-off-by: Robin Stocker <robin@nibor.org>
URIish.unescape() threw an ArrayIndexOutOfBoundsException if the given
url has incorrect percent-encoding (e.g. http://example.com/%gg). But an
URISyntaxException is much better to know the reason of the failure.
Change-Id: I3f40a26d43cd2eb4e32c11aba7dc2594bc1f98e2
Signed-off-by: Yi EungJun <eungjun.yi@navercorp.com>
This is necessary to ensure objects accessed by the TreeWalk come from
the associated ObjectInserter when the merger is a RecursiveMerger
instance and a virtual common base was constructed but not flushed.
Change-Id: Iebe739d30fd868ebc4f61dbfb714673146a2c3ec
According to http://stackoverflow.com/a/8381338, the maximum array
size is not Integer.MAX_VALUE, but Integer.MAX_VALUE - 8
Change-Id: I6ddc7470368acd20abf0885c53c89a982bb0f176
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
The native implementation of inflate() can set finished to return
true at the same time as it copies the last bytes into the buffer.
Check for finished on each iteration, terminating as soon as libz
knows the stream was completely inflated.
If not finished, it is likely input is required before the next
native call could do any useful work. Most invocations are passing
in a buffer large enough to store the entire result. A partial return
from inflate() will need more input before it can continue. Checking
right away that needsInput() is true saves a native call to determine
no bytes can be inflated without more input.
This should fix a rare infinite loop condition inside of inflation
when an object ends exactly at the end of a block boundary, and
the next block contains only the 20 byte trailing SHA-1.
When the stream is finished each new attempt to inflate() returns
n == 0, as no additional bytes were output. The needsInput() test
tries to add the length of the footer block to itself, but then loops
back around an reloads the same block as the block is smaller than
a full block size. A zero length input is set to the inflater,
which triggers needsInput() condition again.
Change-Id: I95d02bfeab4bf995a254d49166b4ae62d1f21346
This reverts commit b646578d89.
openInputStream() is never used in JGit, nor is it used by any
known working DFS implementation. The method was added as a
utility for reading back from a DfsInserter, but the final
implementation of that feature does not requrire this method.
Change-Id: I075ad95e40af49c92b554480f8993ef5658f7684
This allows callers performing multiple separate merges to reuse a
single ObjectInserter without flushing the inserter on each iteration
(which can be slow in the DFS case).
Change-Id: Icaff7d2bc2c20c873ce5a7d9af5002da84ae1c2b
This allows the RecursiveMerger to iteratively create new merge bases
without necessarily flushing packs to storage in the DFS case;
flushing only need happen at the end of the whole merge process.
Since Merger's walk now depends on its inserter, we need to construct
an inserter at Merger construction time. This should not be a
significant increase in overhead since unused inserters don't use any
resources (beyond a reference to the Repository).
We also must release and recreate the walk whenever setObjectInserter
is called, which can break usages where setObjectInserter is called in
the middle of stateful operations on the walk. No usages of this
method within JGit currently do this; the inserter is only ever set
before any stateful walk operations happen.
Change-Id: I9682a6aa4a2c37dccef8e163f132ddb791d79103
This kind of reverted 31148. URI.resolve actually can handle the absolute URL
well, the problem is only the missing "/".
Change-Id: Iee5866c005cbc1430dc20ee7db321b8b51afed30
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
In the DFS implementation, flushing an inserter writes a new pack to
the storage system and is potentially very slow, but was the only way
to ensure previously-inserted objects were available. For some tasks,
like performing a series of three-way merges, the total size of all
inserted objects may be small enough to avoid flushing the in-memory
buffered data.
DfsOutputStream already provides a read method to read back from the
not-yet-flushed data, so use this to provide an ObjectReader in the
DFS case.
In the file-backed case, objects are written out loosely on the fly,
so the implementation can just return the existing WindowCursor.
Change-Id: I454fdfb88f4d215e31b7da2b2a069853b197b3dd
Since 2badedcbe0 in-core merges can write up to 10 MiB
into a TemporaryBuffer.Heap strategy, where the data is stored
as a chain of byte[] blocks.
Support the inserter reading up to the streamFileThreshold (default 50
MiB) from the supplied input stream and hash the content to determine
if the merged result blob is already present in the repository. This
allows the inserter to avoid creating duplicate objects in more cases,
reducing repository pack file churn.
Change-Id: I38967e2a0cff14c0a856cdb46a2c8fedbeb21ed5
The base Merger class already has a single ObjectReader instance that
it handles releasing as necessary, so creating new readers is not
necessary.
Change-Id: I990ec43af7df448c7825fc1b10e62eadaa3e0c2a
Instead of always writing to disk use TemporaryBuffer.LocalFile to
store up to 10 MiB of merge result in RAM. Most source code will
fit into this limit, avoiding local disk IO for simple merges.
Larger files will automatically spool to a temporary file that
can be cleaned up in the finally, reducing the risk of leaving
them on disk and consuming space in /tmp.
Change-Id: Ieccbd9b354d4dd3d2bc1304857325ae7a9f34ec6
The only caller of writeMergedFile is updateIndex, and the only
user of this path object is the code within the method. This is
a no-op change that opens the door to refactoring the way temp
files are handled for inCore merges.
Change-Id: I863a303194689a806b667e55eb958e1decf046c1
When merging common ancestors to create a single virtual common
ancestor the commit does not need to be inserted into the Git
repository. Instead just mock it out in memory as part of the
merger's RevWalk pool.
Make the author and committer stable and predictable for any
given pair of merge bases. It is not necessary for the caller's
name or email to be used as the commit will not be written out.
Change-Id: I88d5ee4de121950e1b032a5c10486c9d2c42656c
Currently if the remote defined in repo manifest xml is non-relative (e.g.
"https://chromium.googlesource.com"), our code will break. This change fixed
that.
It also makes that remotes are ending with "/".
Change-Id: Icef46360b32227a9db1d9bb9e6d929c72aeaa8df
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Instead of passing on the start point as is to CreateBranchCommand, the
resolved ObjectId was used. Given this, CreateBranchCommand did not set
up tracking.
This also fixes CreateBranchCommand with setStartPoint(null) to use HEAD
(instead of NPEing), as documented in the Javadoc.
Bug: 441153
Change-Id: I5ed82b4a4b4a32a81a7fa2854636b921bcb3d471
Signed-off-by: Robin Stocker <robin@nibor.org>
Previously an equality check was performed so an exception would
be thrown if any other options were set.
Change-Id: I36b60e2c0a8aef9fcfe663055dba520192996872
With these, more code can use BranchConfig instead of directly accessing
the raw configuration values.
Change-Id: I4b52f97ff0e3fc8f097512806f043c615a3d2594
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the IndexDiffFilter is asked whether it should include or filter out
a certain path and for that path there is a dircache entry with a stage
different from 0, then the filter should never filter out this entry.
IndexDiffFilter is an optimized version of AnyDiffFilter and there is no
case where the index contains non-0 stages but we still don't see any
diff for that path.
Change-Id: I25915880f304090fe90584c79bddf021231227a2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In change If45bc3d078b3d3de87b758e71d7379059d709603 a new parameter was
added to 3 protected methods of ResolveMerger. This breaks the code of
developers which have subclassed ResolveMerger. The API baseline check
in Eclipse reports this as API breakage.
Since this will break only providers but not consumers of the API this
should be allowed also in minor versions. According to OSGi semantic
versioning
http://www.osgi.org/wiki/uploads/Links/SemanticVersioning.pdf
breaking providers in a minor version update is ok.
Therefore silence these errors using API filter rules.
Bug: 440757
Change-Id: Icabbd0e1de7e877c66a5c4a2c8391473f992a1aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It's an internal package which isn't part of the API. Mark it x-internal
to silence @since tag warnings which are only raised for new API.
Bug: 440757
Change-Id: Id05deaca43f135cd1bfe83cf1f29787cbbdbecac
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The fix is to move the new head commit to the newly-created revert
commit, so that additional revert commits will use the correct head.
Change-Id: I5de3a9a2a4c276e60af732e9c507cbbdfd1a4652
Signed-off-by: Maik Schreiber <blizzy@blizzy.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Apparently repo allows projects overlapping, e.g. one project's path is "foo"
and another project's path is "foo/bar". This is not supported in git submodule.
At JGit repo side we'll skip all the submodules that are in subdirectories of
other submodules, and on repo side we'll make them submodules to resolve this
problem.
Change-Id: I6820c4ef400c530a36150b1228706adfcc43ef64
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Previously when RecursiveMerger was trying to create a single virtual
common base for the merge it was failing when this lead to content-merge
conflicts. This is different from what native git is doing. When native
git's recursive merge algorithm creates a new common base it will merge
the multiple parents and simply take the merge result (potentially
including conflict markers) as common base. See my discussion with Shawn
here: http://www.spinics.net/lists/git/msg234959.html :
> - How should workingtree, index (stage1,2,3) look like if during
that
> merge of common ancestors a conflict occurs? Will I see in stage2
and
> stage3 really see content of X1 and X2?
Its done entirely in memory and never touches the working tree or
index. When a conflict exists in the X1-X2 merge the conflict is
preserved into the new virtual base.
There is still the possibility that the merge of parents lead to
conflicts. File/Folder conclicts, conflicts on filemodes. This commit
only fixes the situation for conflicts when merging content.
Bug: 438203
Change-Id: If45bc3d078b3d3de87b758e71d7379059d709603
During recursive merge jgit potentially has to merge multiple
common ancestors. If this fails because there are conflicts then
the exception thrown for that should have a message which states
this clearly. Previously a wrong message was given ("More than 200
merge bases ...")
Change-Id: Ia3c058d5575decdefd50390ed83b63668d31c1d1
Each time the longest common substring is found the diff algorithm
recurses to reprocess the regions before and after the common string.
Large files with many edits can trigger StackOverflowError as the
algorithm attempts to process a deeply split tree of regions. This
is especially prone to happen in servers where the Java stack size
may have been limited to 1M or even 256K.
To keep edits produced in order a queue is used to process edits
in a depth-first strategy.
Change-Id: Iae7260c6934efdffac7c7bee4d3633a8208924f7
When RecursiveMerger tried to determine a common base tree it was
recursively tried to merge multiple common bases. But these intermediate
merges which have just been done to determine a single common base for
the final merge already filled some important fields (toBeCheckedOut,
toBeDeleted, ...). These side effects of the intermediate merges led to
wrong results of the final merge. One symptom was that after a recursive
merge which should be succesful you could still see leftover files in
the worktree: files which existed in the (virtual) common base but which
don't exist anymore in the branches to be merged.
The solution is easy: Clear the appropriate fields after common base
determination and start the final merge with a clean state.
Change-Id: I644ea9e1cb15360f7901bc0483cdb9286308c226
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
As described in native gits file "git-read-tree.txt" git has in a
special mode when doing the "initial" checkout. "Initial" means that the
index is empty before the checkout. This was not handled correctly in
JGit and is fixed in this commit. Also see
https://github.com/git/git/blob/master/Documentation/git-read-tree.txt#L181
Change-Id: I9b9d1bd9ebf349cfca420c891c7b099a18d07ba4
Setting branch.<name>.rebase or pull.rebase to 'preserve' will preserve
merges during rebase. Also, pull.rebase is now consulted if there is no
branch-specific configuration.
Bug: 429664
Change-Id: I345fa295c7e774e0d0a8e6aba30fbfc3552e0084
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
With --preserve-merges C Git re-does merges using the rewritten merge
parents, discarding the old merge commit. For the common use-case of
pull with rebase this is unfortunate, as it loses the merge conflict
resolution (and other fixes in the merge), which may have taken quite
some time to get right in the first place.
To overcome this we use a two-fold approach:
If any of the (non-first) merge parents of a merge were rewritten, we
also redo the merge, to include the (potential) new changes in those
commits.
If only the first parent was rewritten, i.e. we are merging a branch
that is otherwise unaffected by the rebase, we instead cherry-pick the
merge commit at hand. This is done with the --mainline 1 and --no-commit
options to apply the changes introduced by the merge. Then we set up an
appropriate MERGE_HEAD and commit the result, thus effectively forging a
merge.
Apart from the approach taken to rebase merge commits, this
implementation closely follows C Git. As a result, both Git
implementations can continue rebases of each other.
Preserving merges works for both interactive and non-interactive rebase,
but as in C Git it is easy do get undesired outcomes with interactive
rebase.
CommitCommand supports committing merges during rebase now.
Bug: 439421
Change-Id: I4cf69b9d4ec6109d130ab8e3f42fcbdac25a13b2
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Allows to pass for example a List<RevCommit>.
Change-Id: I5522707060d7d3e0d848ba579956dc62f8fa0234
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
DiffFormatter now suports either side being null and the log program
will output the diff for the first commit.
Bug: 395791
Change-Id: I378957b57e9ad1f7195ba416f402178453f0ebd3
Making the methods static would gain little in performance,
make the code harder to change. Removing unncessary warnings
is more important.
Change-Id: If3e6aa9c1d92e58b4e7a8e246cf4aace237d7a7b
These settings were added by Eclipse simply by touching
the project settings. Adding these makes it simpler to see
what local changes have been made.
Change-Id: Iab0aa62530312eb0c78b03b5c6a632742bcc4978
{} is plain wrong and is not accepted by MessageFormat, the other risk
becoming wrong if another single quote is introduced in the future and
sets a bad example.
Bug: 438261
Change-Id: I2948ca90c10f6ec2574f7f2b9be0a72821ea4daf
* stable-3.4:
Prepare 3.4.2-SNAPSHOT builds
JGit v3.4.1.201406201815-r
Allow retrying connecting SshSession in case of an exception
Change-Id: I7efb009b9e012637a16c57e2e93e074023b8e46c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Connecting to an SshSession may fail due to different reasons. Jsch for
example often throws an com.jcraft.jsch.JschException: verify: false.[1]
The issue is still not fixed in JSch 0.1.51.
In such a case it is worth retrying to connect. The number of connection
attempts can be configured using ssh_config parameter
"ConnectionAttempts" [2].
Don't retry if the user canceled authentication.
[1] http://sourceforge.net/p/jsch/bugs/58/
[2] http://linux.die.net/man/5/ssh_config
Bug: 437656
Change-Id: I6dd2a3786b7d3f15f5a46821d8edac987a57e381
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The current behavior of passing a TreeFilter to RevWalk has limited
usefulness, since the RevFilter derived from the TreeFilter is always
ANDed together with any other RevFilters. It is also tied fairly
tightly to the parent rewriting mechanism.
Make TreeRevFilter a generic RevFilter that matches modified paths
against any TreeFilter. This allows for more complex logic like
(modified this path OR authored by this person).
Leave the rewrite flag logic in this class, since it's closely tied to
the parent comparison code, but hidden behind a protected constructor.
Change-Id: Ia72ef591a99415e6f340c5f64583a49c91f1b82f
Sometimes an input stream is more useful than the filename of the xml manifest.
Change-Id: Icb09ac751b3d8d7eb14427ad1aac8cee0c371c5f
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
DeltaTask$Block.partitionTask was doing an infinite loop if number of
threads was greater than the totalWeight. The weightPerThread was 0
which was causing the infinite loop. Set the weightPerThread to a
minimal value of one.
Bug: 420915
Change-Id: Ia8e3ad956d53d8193937b7fa1bc19aafde9767ff
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
* stable-3.4:
Prepare post 3.4 RC3 builds
JGit v3.4.0.201406041058-rc3
blame: Un-break isFile check in tree walk
Prepare post 3.4.0 RC2 builds
JGit v3.4.0.201405281120-rc2
Fix authentication type names broken by 0b5441a8
Update Luna target platform to Orbit release R20140525021250
Change-Id: I344f1bbb8939bda01d524ec1a3218aa32bcc62f5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Originally, blame's walk to find a scapegoat to blame for a file
walking backward from a commit used the test
treeWalk.getFileMode(0).getObjectType() != OBJ_BLOB
to throw out gitlink (submodule) entries. Later, 52500d3264 (blame:
Micro optimize blob lookup in tree, 2014-04-17) changed that test to
(treeWalk.getRawMode(0) & TYPE_FILE) != TYPE_FILE
These checks are not the same, though: the older test accepts files
and symlinks, while the newer one accepts files, symlinks, and gitlink
(submodule) entries. This is particularly broken in the submodule
case --- trying to parse the referred-to commit as a blob produces
caught an exception: GET /gerrit/+blame/master/plugins/reviewnotes HTTP/1.1
org.eclipse.jgit.errors.MissingObjectException: Missing blob 61702414c046dd6b811c9137b765f9db422f83db
Stick to just (possibly executable) files instead. Symlinks are not
line-oriented data so blame on a symlink is not likely to be useful.
A quick grep for '& TYPE_' doesn't find any other instances of this
bug.
Change-Id: Iebcc91f1bee3c91adda51dccd6372e8302bf23fe
Signed-off-by: Jonathan Nieder <jrn@google.com>
TranslationBundle#load() used to load resource bundles through
ResourceBundle#getBundle() without explicitly specifying a class loader.
In this case, the class laoder of the calling class (TranslationBundle
here) is used. This approach fails in runtime environments like OSGi
where there are multiple class loaders.
This change enables loading resource bundles in multi class loaders
environments. The fix is to pass the class loader of the
TranslationBundle-derived class to ResourceBundle#getBundle().
Bug: 436232
Change-Id: I39db61e012dc93ebf388a71bf6088a3310a22bac
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
When update the manifest against a bare repository, RepoCommand will replace
every existing content from the repository with contents populated from the
manifest. Added note for that and a unit test to make sure this behavior.
Change-Id: I1d5960e84bca5aa2a4e86f424d2ddd4197894cdc
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
0b5441a8 introduced an enum for authentication types and changed the
case of digest and basic authentication type names to all uppercase.
This broke digest authentication at least when using Gerrit as the git
server.
According to RFC2617 [1] "Basic" and "Digest" is the literal to be used
in authentication headers and not "BASIC" [1] and "DIGEST" [2].
According to RFC4559 "Negotiate" [3] is used for SPNEGO based
authentication.
[1] http://tools.ietf.org/html/rfc2617#page-5
[2] http://tools.ietf.org/html/rfc2617#page-8
[3] http://tools.ietf.org/html/rfc4559#page-3
Bug: 435866
Change-Id: I6173aff9352d7def225cafe2d73e5176ad40dff0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The call() function of LsRemoteCommand returns Collection<Ref>, while its
internal is using Map<String, Ref> all the time. Sometimes the map is much more
useful to the caller so add a callAsMap() function to keep the API
compatibility.
Change-Id: Icb96b71277d5e2de59872aa777352dedc048c4e3
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Unstashed changes are saved in a commit which is added as an additional
parent to the stash commit.
This behaviour is fully compatible with C Git stashing of untracked
files.
Bug: 434411
Change-Id: I2af784deb0c2320bb57bc4fd472a8daad8674e7d
Signed-off-by: Andreas Hermann <a.v.hermann@gmail.com>
If a client passes a multiline message as argument to ReflogWriter.log()
the Reflog gets corrupted and cannot be parsed. ReflogWriter.log() is
invoked implicitly from various commands such as StashCreate, Rebase and
many more. However the message is not always filtered for line feeds.
Such an example is the StashCreateOperation of EGit which passes
unchecked user input as commit message. If a multiline comment is pasted
to the stash create dialog, the reflog gets corrupted.
ReflogWriter now replaces line endings in log message with spaces.
Bug: 435509
Change-Id: I3010cc902e13bee4d7b6696dfd11ab51062739d3
Signed-off-by: Andreas Hermann <a.v.hermann@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The aim of this change is to place all commits of a branch on the same
lane and commits of other (side) branches on different lanes.
The algorithm treats first parents of a commit specially by placing them
on the same lane as the commit itself. When a commit is the first parent
of multiple children it could be placed on any of these children's
lanes. In this case it is placed on the longest child lane, as this is
usually the lane of the branch the commit actually was made on.
Other (non-first) parents are placed on new lanes. This creates a layout
that should make it easier to see branches and merges and follow linear
branch histories.
This differs from the previous approach, which sometimes plotted the
commits of a side branch on the same lane as the base branch commits and
further commits on the base branch appeared on a different lane.
This made the base branch appear as if it was the side branch and
the side branch appears to be the base branch.
In addition to lane assignment, also the plotting code changed to start
drawing a branch lane from the commit where it forks out. Previously it
started only when the first commit on the branch appeared.
Active lanes are continued with every commit that is processed.
Previously lanes were only continued when the next commit on the lane
was encountered. This could produce (temporarily) dangling commits if
the next commit on the lane was not processed yet.
CQ: 8299
Bug: 419359
Bug: 434945
Change-Id: Ibe547aa24b5948ae264f7d0f56a492a4ef335608
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Child commits always have a lane assigned when their parents are
processed, so this code is no longer necessary.
Children only assign themselves to parents in
PlotCommitList.setupChildren(), which is called from enter(), when the
child is processed. If the child leaves enter() it should always have a
lane assigned. As a result of this, when processing a parent, all its
known children already have lanes assigned. If the underlying RevWalk
emits a parent before one of its children (which it should not do), the
parent does not know of the child emitted later, because setupChildren()
has not been called for the child yet. So even in this case, no child
without a lane is encountered when processing a (parent) commit.
Change-Id: I982adc5c114370ecfd699d96221a76463de900ca
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This also properly removes the newly determinded lane position from the
freePositions set in handleBlockedLanes(). closeLane() does only recycle
active lanes, to avoid recycling lanes twice.
Change-Id: Icd019fcf7974441ed05686bb61d6de4e8bf4ab7c
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Adds support for Negotiate(SPNEGO) HTTP authentication method. This method
is set to have a higher priority as Digest HTTP authentication method.
Bug: 428836
Change-Id: Ib181096d39f538df1dd7d3f36516843777bf12ae
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Refactors HttpAuthMethod to support more authentication methods,
still sorted by priority orders.
Bug: 428836
Change-Id: I049c1742e7afbc51f3f6033fa4d471b344813cfa
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Sun HttpURLConnection is able to handle authentication like SPNEGO without
caller intervention. However, there are some restrictions:
- do not need user direct input (user,password for example)
- it doesn't work when request body is chunked/streamed (because it cannot be
replayed)
Unfortunately there is no real way to leverage HttpURLConnection authentication
work as the authentication header is stripped off the request before returning
to the caller. There's also no way to explicitly disable authentication in
HttpURLConnection (SPNEGO auth will always be attempted if a valid token can be
created by GSSAPI).
This is an issue for jgit since it is expected that the first request will be
used to detect authentication method, and reuse for the subsequent requests.
This patch modifies TransportHTTP to detect authentication done in the background
by HttpURLConnection and sets the jgit authentication method accordingly so it will
always work for future requests (assuming that the authentication method used by
HttpURLConnection is also supported by jgit).
Bug: 428836
Change-Id: I79f3b70ca2b8377e20da8e6a01914e43e96595ce
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Adds a factory class for GSSManager. GSSManager is already a factory class but
it doesn't work well with SPNEGO HTTP authentication unless the
javax.security.auth.useSubjectCredsOnly system property is set to false.
On Sun JDK, Sun GSSManagerImpl can be configured directly for SPNEGO auth
(without setting any system property). For a better experience, the class
availability is detected by reflection and used instead.
Detection is only done once, and fallbacks to org.ietf.jgss.GSSManager.
Bug: 428836
Change-Id: Idb9123d1f4013966919db43043ec959d4b133ae2
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This partially reverts 6de12836d7.
Performing a TreeWalk over 2 trees to identify and skip unmodified
subtrees to pass all blame onto an ancestor appears to be a micro
optimization that works for a very limited number of files. In the
general case the 2 tree walk is slowing down blame more than it helps
to speed it up.
I keep coming up with files in multiple repositories where 6de128 is
making things worse, not better, and only one example where it
actually improved performance, render_view_impl.cc in chromium
as described in the commit message.
Change-Id: Ic6d5fff22acb5ab6485614a07bdb388e8c336679
By specifying a mainline parent, a merge is cherry picked as if this
parent was its only parent. If no mainline parent is given, cherry
picking merges is not allowed, as before.
Change-Id: I391cb73bf8f49e2df61428c17b40fae8c86a8b76
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Adds further tests where the working tree is dirty (differs from
index) and where we have staged but uncommitted changes.
Fixed the test case 9 for file/directory conflicts.
Bug: 428819
Change-Id: Ie44a288b052abe936ebb74272d0fefef3b218a7a
Signed-off-by: Axel Richard <axel.richard@obeo.fr>
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
C git tries to read this file from the rebase state directory and
complains about it not being there for rebases started by JGit. An empty
'quiet' file represents the (verbose) default.
Change-Id: I1844ccbf8d35442d7a8918b57b67eb9b9efd6352
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Previously, it was only possible to archive the entire repository.
This patch introduces the ability to select specific files and
directories to archive.
Archiving the entire repository remains the default behaviour.
org.eclipse.jgit.api.ArchiveCommand: Adding setPaths(String... paths)
method.
Change-Id: Iedcd40fbfd71238b0088174bbe2717fae196e047
Signed-off-by: Shaul Zorea <shaulzorea@gmail.com>
In two places we threw an IOException and the message was built using
JGitText.couldNotWriteFile. We specified 2 parameters, but this pattern
expects only one parameter. In both places we tried to rename a file,
that's why we wanted two parameters (src and target) for the exception
text.
I changed it to use JGitText.renameFileFailed which accepts two
parameters and fits better.
Change-Id: Ib8c2cf78f2b26ca2b97754fe91fdb20b30392415
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I587aae0ad217ed092f061682ffa66c724f221096
Signed-off-by: Tomasz Zarna <tomasz.zarna@tasktop.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- don't mark them as singleton to allow coexistence of multiple versions
in the same installation
- add missing version qualifier to Eclipse-SourceBundle header
see
https://dev.eclipse.org/mhonarc/lists/cross-project-issues-dev/msg10524.html
Change-Id: Ie4e028038f5a1d3e18b0be06c3d2ea82e7f9068d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* changes:
Do not rewrite parents in RevWalkTextBuiltins
RevWalk: Allow disabling parent rewriting
RevWalkTextBuiltin: Add -n to limit number of commits returned
Previously, setting any TreeFilter on a RevWalk triggered parent
rewriting, which in the current StartGenerator implementation ends up
buffering the entire commit history in memory. Aside from causing poor
performance on large histories, this does not match the default
behavior of `git rev-list`, which does not rewrite parent SHAs unless
asked to via --parents/--children.
Add a new method setRewriteParents() to RevWalk to disable this
behavior. Continue rewriting parents by default to maintain backwards
compatibility.
Change-Id: I1f38e05526071c75ca58095e312663de5e6f334d
Using the lane position and other data for equals/hashCode is not
useful.
Change-Id: I7af151d8a84544a77a486474c8ac71dd80090c66
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When blaming a merge commit with "Ignore whitespace changes" enabled,
don't discard blame candidates for other parents when we encounter a
parent that only has whitespace changes compared to the merge result.
The algorithm early prepares parents for blaming, removing the
appropriate blame regions from the list of regions still to blame. Only
at the end, the prepared blame candidates are submitted for blaming.
When looking at a non-first parent which only differs in whitespace to
the merge result, it submitted that parent, but only to blame it for the
(usually few) lines not already prepared to blame on other parents. Due
to an early return the blame candidates for the previous parents were
forgotten, leaving many lines unannotated.
bug: 433024
Change-Id: I43c9caf2078b92b05e652dbed2192568907bf199
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When JGit uses bitmaps (which is the case after a gc), the push command
doesn't go through the code where MissingObjectExceptions are caught
for remote objects not found locally.
Fixed by removing earlier non-locally-found remote objects.
This was seen withing gerrit, see:
https://code.google.com/p/gerrit/issues/detail?id=2025
Bug: 426044
Change-Id: Ieda718a0530e3680036edfa0963ab88fdd1362c0
Signed-off-by: Jean-Jacques Lafay <jeanjacques.lafay@gmail.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If remote name contains / or there was a branch directly under the
refs/remotes namespace (wrong) the computation of remote name and
suggested local branch name would fail. Fix this by looking at the
configured remotes. A ref under refs/remotes that does not match a
remote configuration is not considered a remote tracking branch anymore.
This patch does not fix all similar errors in EGit/JGit.
Bug: 411002
Bug: 400414
Change-Id: I2515a6ed05f9104c387ce4e43b24dae942ae2473
Instead of requiring the caller to know how to list remote
names or parse remote branch names, add a few utilities for
that.
Change-Id: Ib6b2403532f4abbce594a03c0b9da49d30b19f70
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
* changes:
Commit changes generated during repo command
Added implementation of copyfile rule.
Added groups support to repo subcommand.
Added the command line of jgit repo.
Implemented first part of the repo sub-command.
JGit caches the contents of the known_hosts file within JSch when
first started, and never attempts to re-read it. If the contents
change (such as when using Gerrit replication), the new host will
never be found.
On failures, try reloading the knonwn_hosts and retry the
connection, in addition to reloading the credentials.
Change-Id: I980c4f4003f2a48c71b9b47c51e640d1e7742f58
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Streaming packed deltas is so slow that it never feasibly completes
(it will take hours for it to stream a few hundred megabytes on
relatively fast systems with a large amount of storage). This
was indicated as a "failed experiment" by Shawn in the following
mailing list post:
http://dev.eclipse.org/mhonarc/lists/jgit-dev/msg01674.html
Change-Id: Idc12f59e37b122f13856d7b533a5af9d8867a8a5
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Currently the repo sub-command only "works", but the submodules will have .git
directories themselves, and lacks group support.
Change-Id: I88a6ee07109187c6c9bfd92a044775fcfb5befa6
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Skipping directly to the parent is already possible with an existing
helper method. Update the source path (to follow the rename) and then
use the existing code path to push the parent inside the current entry.
Change-Id: Icb1d49e53d14b599efc478990613625a9e058e09
Pass in the RevWalk and let the candidate decide how to prepare itself
for output. This removes the conditional for the missing sourceCommit,
as candidates missing a commit can override the method with a no-op.
Change-Id: I3fa19b8676dfd3c177583f8f42593b5000b5350d
Instead of updating the candidate's regionList field to iterate
through the linked list of regions, use a special purpose field
in the BlameGenerator. This allows the candidate to be unmodified.
Change-Id: I2cda031b59220ab603ef82050e741ecbbaa1953f
The computeRange method is inefficient for computing the entire file.
If the entire file was selected ask for the entire file.
Change-Id: I8b2dbf635e875cc125443dac50be121208646540
If the caller uses a BatchRefUpdate to execute these (e.g. fetch)
there may be more detailed status information inside of the command
that was used to execute it. Allow the caller to obtain that status
data from the ReceiveCommand version of the TrackingRefUpdate.
Change-Id: I47209377fb8fcef0346d7678f1ab27f4790b49bc
* changes:
diff: Optimize single line edits
blame: Reduce running time ~4.5% by skipping common subtrees
blame: Micro optimize blob lookup in tree
blame: Automatically increase commit abbreviation length
Blame correctly in the presence of conflicting merges
If the header and trailer are identical up to a single line on both
sides, return that REPLACE edit as the only result. No algorithm can
break down a REPLACE with height of 1.
Change-Id: I483c40e8790cc3e8b322ef6dfce2299491fd0ac7
With this commit running blame on render_view_impl.cc[1] saves
about 644 ms over prior versions, reducing the time about 4.5%.
Large projects often contain strands of commits where no changes
are made to a particular subtree. Blame used to dive recursively
into these subtrees to look for the blob and check if its SHA-1
was changed. In chromium/src[1] only 20% of the commits modify
the content/renderer subtree relevant for the file.
The recursivePath is necessary to check for '/' and remember
if common subtree elimination should be attempted. When a file
lives within a subtree the extra cost to check for unmodified
subtrees saves time. However for files in the root tree the
extra work incurred by TreeWalk is not worthwhile and would
significantly increase overall running time.
Now typical running times from an otherwise idle desktop:
real 0m13.387s 0m13.341s 0m13.443s
user 0m15.410s 0m15.220s 0m15.350s
previously:
real 0m14.085s 0m14.049s 0m13.968s
user 0m15.730s 0m15.820s 0m15.770s
[1] 34d6e5c5b4/content/renderer/render_view_impl.cc
Change-Id: Ib16d684df7ffa034ee28def3fb22c797998d5b7b
Avoid converting the raw mode to FileMode. This is an expensive
if-else-if sort of test to just check if the thing is a blob.
Instead test the bit mask directly, which is at least a few
instructions shorter.
The TreeWalk is already recursive and will auto-dive into any
subtrees found. isSubtree check is unnecessary, as is the loop,
as only one result will ever be returned by next().
Change-Id: I9fb25229ebed857469427bfbdf74aedebfddfac8
Ensure commit object names are unique by extending the default
abbreviation as long as necessary. This allows `jgit blame` to
more closely match the formatted output of `git blame` on large
histories like Gerrit Code Review's ReceiveCommits.java file.
Change-Id: I5f7c4855769ee9dcba973389df9e109005dcdb5b
Problem:
The BlameGenerator used the RevFlag SEEN to mark commits it had
already looked at (but not necessarily processed), to prevent
processing a commit multiple times. If a commit is a conflicting
merge that contains lines of the merge base, that have been deleted
in its first parent, either these lines or the lines untouched
since the merge base would not be blamed properly.
This happens for example if a file is modified on a main branch in an
earlier commit M and on a side branch in a later commit S. For this
example, M deletes some lines relative to the common base commit B,
and S modifies a subset of these lines, leaving some other of these
lines untouched.
Then side is merged into main, creating a conflict for these
lines. The merge resolution shall carry over some unmodified lines
from B that would otherwise be deleted by M. The route to blame
these lines is via S to B. They can't be blamed via M, as they
don't exist there anymore.
Q
|\
| \
| S
| |
M |
| /
|/
B
Blaming the merged file first blames via S, because that is the
most recent commit. Doing so, it also looks at B to blame the
unmodified lines of B carried over by S into the merge result. In the
course of this, B is submitted for later processing and marked SEEN.
Later M is blamed. It notices that its parent commit B has been
SEEN and aborts processing for M. B is blamed after that, but only
for the lines that survived via S.
As a result, only the lines contributed by S or by B via S are
blamed. All the other lines that were unchanges by both M and S,
which should have been blamed to B via M, are not blamed.
Solution:
Don't abort processing when encountering a SEEN commit. Rather add the
new region list of lines to be blamed to those of the already SEEN and
enqueued commit's region list. This way when the B commit of the
above example is processed, it will blame both the lines of M and S,
yielding a complete blame result.
Bug: 374382
Change-Id: I369059597608022948009ea7708cc8190f05a8d3
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Shawn Pearce <spearce@spearce.org>
This should make it possible for the gitiles plugin to register its
archive formats after gerrit has already registered them.
Signed-off-by: Jonathan Nieder <jrn@google.com>
Change-Id: Icb80a446e583961a7278b707d572d6fe456c372c
* stable-3.3:
Ensure that stored credentials aren't reset too early
Change-Id: Idcd57e12f5fe905952be49edb4f82db6b7ed469f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Some commands are started without showing a dialog allowing to enter
credentials if needed. Hence we need to tolerate one failing HTTP
authentication to trigger loading credentials from the secure store.
Hence we should not immediately reset the stored credentials if the
first attempt to authenticate fails.
Bug: 431209
Change-Id: I1b9fa34c3d70be226bb1c59c9ebe995998d29bc8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When safeForMacOS is enabled the checker verifies a name does not
match against another name in the same tree after normalization to
NFC. The check was incorrect and failed when the first name was put
in, rejecting simple trees containing only one file like "F".
Add a test for this simple tree to verify it is accepted.
Fix the test for NFC normalization to actually normalize
and have a collision.
Change-Id: I39e7d71150948872bff6cd2b06bf8dae52aa3c33
"Invalid tree aa6f10291050a00de83b4630783030b9e3b969ec:duplicate entry names"
is hard to read. A space after the object name and before the message
makes the message more readable.
Change-Id: I96406100dbef8e4bc8fe2047d102681194dc8847
When working on a non-bare repository with a detached HEAD jgit's GC was
packing the ref named "HEAD" into the packed-refs file and deleted the
loose ref (the file .git/HEAD!). This made the repo unusable for native
git. This is fixed by telling jgit to only pack refs starting from
"refs/"
Change-Id: I50018aa006f18b244d2cae2ff78b5ffe1b821d63
Previously, calling addAnnotatedTags() did not modify any state when
there were no annotated tags in the repository. This caused the code
to assume no addFoo() methods had been called, and fell back to the
default of adding refs/*. Instead, use null to indicate neither
addRefs() nor addAnnotatedTags() was called.
Add a test for this behavior.
Change-Id: I9926e5ac17e1a983cd399798993031c72bd79c2c
* stable-3.3:
Prepare 3.3.2-SNAPSHOT builds
JGit v3.3.1.201403241930-r
Retry to call credentials provider if http authentication failed
Ensure that ssh authentication is retried only in JGit
[findBugs] Ensure streams are closed in a finally block
Update com.jcraft.jsch to 0.1.50 also in pom dependencies
Change-Id: I45b48a3f2dc8c7708e9518645d72bc5645002836
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Under certain circumstances isMergedInto() returned
false even though base is reachable from the tip.
This will hinder pushes and receives by falsely
detecting "non fast forward" merges.
o---o---o---o---o
/ \
/ o---o---A---o---M
/ /
---2---1-
if M (tip) was compared to 1 (base), the method
isMergedInto() could still return false, since
two mergeBases will be detected and the return
statement will only look at one of them:
return next() == base;
In most cases this would pass, but if "A" is
a commit with an old timestamp, the Generator
would walk down to "2" before completing the
walk pass "A" and first finding the other
merge base "1". In this case, the first call to
next() returns 2, which compared to base evaluates
as false.
This is fixed by iterating merge bases and
returning true if base is found among them.
Change-Id: If2ee1f4270f5ea4bee73ecb0e9c933f8234818da
Signed-off-by: Gustaf Lundh <gustaf.lundh@sonymobile.com>
Signed-off-by: Sven Selberg <sven.selberg@sonymobile.com>
If the user provided wrong credentials or credentials changed we
shouldn't give up immediately but retry to get valid credentials from
the credentials provider. Reset the credentials provider if
authentication failed to avoid it reuses wrong credentials in
case it stored them in a persistent store.
Bug: 338048
Bug: 342592
Bug: 427735
Change-Id: Ibd62ef3da17be6454991c43f524c8bbc7ca3c37e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit wants to control retries during ssh authentication. But JSch by
default already retries 6 times. Hence disable retries in JSch. Without
this the credentials provider isn't reset if e.g. wrong credentials are
specified.
Bug: 430210
Change-Id: I6fa726a14a84b06411e7010608c7a1e2bfb8bfe8
When more than one lane is drawn, some commits are vertically misaligned
(off by two pixels). This change fixes the alignment.
Bug: 426047
Change-Id: Icbe7ce9f5a6b281b2aaab66e4d76dfc1010b2fb5
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Copying flags through a graph with deep side branches can cause
StackOverflowError. The recursive step to visit the 2nd parent of
a merge commit can overflow the stack if these are themselves very
deep histories with many branches.
Rewrite the loop to iterate up to 500 recursive steps deep before
unwinding the stack and running the remaining parts of the graph
using a dynamically allocated FIFORevQueue.
This approach still allows simple graphs that mostly merge short
lived topic branches into master to copy flags with no dynamic
memory allocation, relying only on temporary stack extensions.
Larger more complex graphs only pay the allocation penalities
if copying has to extend outwards "very far" in the graph, which
is unlikely for many coloring based algorithms.
Change-Id: I1882e6832c916e27dd5f6b7602d9caf66fb39c84
Verifying 100 new objects are fully connected to the existing DAG
is usually very cheap. Checking the entire Linux kernel history is
fully connected when pushing it to a new repository can take 30-60
seconds. Display a progress counter during this time so the client
knows the server is still working.
Change-Id: Iababe3ee1d35cb82f2bef2f12da7a2ecd03282b0