* stable-4.4:
Log if Repository.useCnt becomes negative
Time based eviction strategy for repository cache
Add method to read time unit from config
Align include.path max depth with native git
Config load should not fail on unsupported or nonexistent include path
Allow using JDK 7 bootclasspath when compiling JGit using Java 8
Extract work queue to allow reusing it
Change-Id: I6aeedb1cb8b0c3068af344a719c80a03ae68fc23
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When Repository.close() decrements the useCount to 0 currently the cache
immediately evicts the repository from WindowCache and RepositoryCache.
This leads to I/O overhead on busy repositories because pack files and
references are inserted and deleted from the cache frequently.
This commit defers the eviction of a repository from the caches until
last use of the repository is older than time to live. The eviction is
handled by a background task running periodically.
Add two new configuration parameters:
* core.repositoryCacheExpireAfter: cache entries are evicted if the
cache entry wasn't accessed longer than this time in milliseconds
* core.repositoryCacheCleanupDelay: defines the interval in milliseconds
for running a background task evicting expired cache entries. If set to
-1 the delay is set to min(repositoryCacheExpireAfter, 10 minutes). If
set to 0 the time based eviction is switched off and no background task
is started. If time based eviction is switched off the JVM can still
evict cache entries if heap memory is running low.
Change-Id: I4a0214ad8b4a193985dda6a0ade63b70bdb948d7
Also-by: Matthias Sohn <matthias.sohn@sap.com>
Also-by: Hugo Arès <hugo.ares@ericsson.com>
Also-by: Sasa Zivkov <sasa.zivkov@sap.com>
If the client sent a well-formed enough request to see it wants to use
side-band-64k for status reporting (meaning its a modern client), but
any other command record was somehow invalid (e.g. corrupt SHA-1)
report the parsing exception using channel 3. This allows clients to
see the failure and know the server will not be continuing.
git-core and JGit clients send all commands and then start a sideband
demux before sending the pack. By consuming all commands first we get
the client into a state where it can see and respond to the channel 3
server failure.
This behavior is useful on HTTPS connections when the client is buggy
and sent a corrupt command, but still managed to request side-band-64k
in the first line.
Change-Id: If385b91ceb9f024ccae2d1645caf15bc6b206130
Some branches in WorkingTreeIterator.getIndexFileMode() have not been
covered by tests. Enhance the tests to increase test coverage.
Change-Id: I400a221048f0f6cbaa987350eaf998b0ebb50a4e
* changes:
Prune UNREACHABLE_GARBAGE packs when they expire
Use try-with-resources in DfsGarbageCollector.writePack
Fix lastModified to be consistent in DfsGarbageCollector
Add GC_REST PackSource to better order DFS packs
DfsGarbageCollector will now enforce a maximum time to live (TTL) for
UNREACHABLE_GARBAGE packs. The default TTL is 1 day, which should be
enough time to avoid races with other processes that are inserting
data into the repository.
Change-Id: Id719e6e2a03cfc9a0c0aef8ed71d261dda14bd0c
Signed-off-by: Mike Williams <miwilliams@google.com>
1f86350 added initial support for include.path. Relative path and path
with tilde are not yet supported but config load was failing if one of
those 2 unsupported options was encountered. Another problem was that
config load was failing if the include.path file did not exist.
Change the behavior to be consistent with native git. Ignore unsupported
or nonexistent include.path.
Bug: 495505
Bug: 496732
Change-Id: I7285d0e7abb6389ba6983e9c46021bea4344af68
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Treewalk has a member 'attr' which caches the attributes for the current
entry. We did not reset the cache always when moving to next entry. The
effect was that when there are no attributes for an entry 'a' but 'a'
was skipped by a Treewalk filter then Treewalk stopped looking for
attributes until TreeWalk.next() was called again.
Change-Id: Ied39b7fb5f56afe7a237da17801003d0abe6b1c7
Problem occurs when the checkout wants to create a file 'd/f' but
the workingtree contains a dirty file 'd'. In order to create d/f the
file 'd' would have to be deleted and since the file is dirty that
content would be lost. This should lead to a CheckoutConflictException
for d/f when failOnConflict was set to true.
This fix also changes jgit checkout semantics to be more like native
gits checkout semantics. If during a checkout jgit wants to delete a
folder but finds that the working tree contains a dirty file at this
path then JGit will now throw an exception instead of silently keeping
the dirty file. Like in this example:
git init
touch b
git add b
git commit -m addB
mkdir a
touch a/c
git add a/c
git commit -m addAC
rm -fr a
touch a
git checkout HEAD~
Change-Id: I9089123179e09dd565285d50b0caa308d290cccd
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Also-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
The native wire protocol sends ref advertisements in the pkt-line
format, which requires encoding the ObjectId and ref name onto a byte
sequence. Busy servers show this is a very high source of garbage,
which pushes the garbage collector harder when there are many refs in
the repository (e.g. 70k, in a Gerrit managed repository).
Optimize the side band advertiser by retaining the CharsetEncoder,
minimizing the amount of temporary garbage built during encoding.
Change-Id: I406c654bf82c1eb94b38862da2425e98396134cb
Git servers supporting HTTP transport can send multiple WWW-Authenticate
challenges [1] for different authentication schemes the server supports.
If authentication fails now retry all authentication types proposed by
the server.
[1] https://tools.ietf.org/html/rfc2617#page-3
Bug: 492057
Change-Id: I01d438a5896f9b1008bd6b751ad9c7cbf780af1a
Signed-off-by: Christian Pontesegger <christian.pontesegger@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When using a DfsInserter for high-throughput insertion of many
objects (analogous to git-fast-import), we don't necessarily want to
do a random object lookup for each. It'll be faster from the
inserter's perspective to insert the duplicate objects and let a later
GC handle the deduplication.
Change-Id: Ic97f5f01657b4525f157e6df66023f1f07fc1851
* master:
Fix javadoc errors and unused imports introduced by ddd0fe25
RepoCommand: record manifest shallow recommendation in .gitmodules
RepoCommand: record manifest groups as submodule labels
Remove the deprecated TestRepository.getClock() method
Replace use of deprecated method Repository.getRef()
[findBugs] Prevent potential NPE in
FileLfsRepository.getOutputStream()
Better report on client side if push failed due to too large object
[findBugs] Prevent potential NPE in CloneCommand.init()
RepoCommand: remove --record-remote-branches
RepoCommandTest: Improve assertion message for remote branch recording
Change-Id: I4fbce4f84925a933fcc9a48058ed6793f5821b97
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Git core learned about the submodule.<name>.shallow option in
.gitmodules files, which is a recommendation to clone a submodule
shallow. A repo manifest may record a clone depth recommendation as
an optional field, which contains more information than a binary
shallow/nonshallow recommendation, so any attempted conversion may be
lossy. In practice the clone depth recommendation is either '1' or doesn't
exist, which is the binary behavior we have in Git core.
Change-Id: I51aa9cb6d1d9660dae6ab6d21ad7bae9bc5325e6
Signed-off-by: Stefan Beller <sbeller@google.com>
Git core learned about attributes in pathspecs:
pathspec: allow querying for attributes
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
(177161a5f7, 2016-05-20)
We intend to use these pathspec attribute patterns for submodule
grouping, similar to the grouping in repo. So the RepoCommand which
translates repo manifest files into submodules should propagate this
information along. This requires writing information to the
.gitattributes file instead of the .gitmodules file. For now we just
overwrite any existing .gitattributes file and do not care about prior
attributes set. If this becomes an issue we need to figure out how to
correctly amend the grouping information to an existing .gitattributes
file.
Change-Id: I0f55b45786b6b8fc3d5be62d7f6aab9ac00ed60e
Signed-off-by: Stefan Beller <sbeller@google.com>
* master:
JGit CLI: allow to call git init with specific directory
Redirect all Show output to outs
Support git config [include] section with absolute path(s)
Added filter for merge and non-merges commits.
[findBugs] Prevent potential NPE in FS_POSIX.readUmask()
[findBugs] Fix calculation of host header in SignerV4
Update Orbit repository to S20160518051658 for Neon RC2
Fix StashApply regarding handling of untracked files
GC should not pack objects only referenced by ORIG_HEAD,...
Make sure to overwrite files when "reset --hard" detects conflicts
Allow setting FileMode to executable when applying patches in
ApplyCommand
Fix config value get to return last instead of 1st just like git
Remove UTF-8 checking duplication in Config lib subclasses
Update Maven plugins
Fix type parameter in javadoc in TestRepository.delete(String ref)
TestRepository: Add delete() method
Make BaseReceivePack.setAtomic public
ReceivePack: Pass atomic setting from client to BatchRefUpdate
Change-Id: I5c9c5b7ccb23fb48b44b3da10b2c5d876d043d24
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.3:
Fix computation of id in WorkingTreeIterator with autocrlf and
smudging
Prepare 4.3.2-SNAPSHOT builds
JGit v4.3.1.201605051710-r
Scan loose ref before packed in case gc about to remove the loose
Fix possible NPEs when reporting transport errors
Fix calling of clean/smudge filters from Checkout,MergeCommands
Fix ApplyCommand when result of patch is an empty file
Change-Id: I829f06699f6670e519d04c927bdba4b82df29199
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit failed to do checkouts when the index contained smudged entries and
autocrlf was on. In such cases the WorkingTreeIterator calculated the
SHA1 sometimes on content which was not correctly filtered. The SHA1 was
computed on content which two times went through a lf->crlf conversion.
We used to tell the treewalk whether it is a checkin or checkout
operation and always use the related filters when reading any content.
If on windows and autocrlf is true and we do a checkout operation then
we always used a lf->crlf conversion on any text content. That's not
correct. Even during a checkout we sometimes need the crlf->lf
conversion. E.g. when calculating the content-id for working-tree
content we need to use crlf->lf filtering although the overall operation
type is checkout.
Often this bug does not have effects because we seldom compute the
content-id of filesystem content during a checkout. But we do need to
know whether a file is dirty or not before we overwrite it during a
checkout. And if the index entries are smudged we don't trust the index
and compute filesystem-content-sha1's explicitly.
This caused EGit not to be able to switch branches anymore on Windows
when autocrlf was true. EGit denied the checkout because it thought
workingtree files are dirty because content-sha1 are computed on wrongly
filtered content.
Bug: 493360
Change-Id: I1072a57b4c529ba3aaa50b7b02d2b816bb64a9b8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
As per [1], but limited to absolute paths indeed. No support yet for
tilde or $HOME expansion. Support for the --[no-]includes options
([1]) is not part of this commit scope either, but those options'
defaults are in effect as described in [1].
[1] https://git-scm.com/docs/git-config
Included path can be a config file that includes other path-s in turn.
An exception is thrown if too many recursions (circular includes)
happen because of ill-specified config files.
Change-Id: I700bd7b7e1625eb7de0180f220c707d8e7b0930b
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Added the option to retrieve either merge or non-merge commits in the
LogCommand.
Change-Id: Ie0e1c515a823f2392783f1a47d385c31230e8167
Signed-off-by: Alcemir Santos <alcemir.santos@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There was a bug regarding how JGit handled untracked files when applying
a stash. Problem was that untracked files are applied by doing a merge
of HEAD and untrackedFiles commit with a merge base of the stashed HEAD.
That's wrong because the untrackedFiles commit has no parent and
contains only the untracked files. Using stashed HEAD as merge base
leads to unneccessary conflicts on files not event included in the
untrackedFiles commit.
Imagine this graph directly before you want to apply a stash which was
based on 0. You want to apply the stash on current HEAD commit 5.
5 (HEAD,master)
/
0---+
\ \
1---3 (WIP on master)
/
2 (untracked files on master)
Imagine for a specific (tracked) file f
- commit 0 contains X
- HEAD contains Y
- commit 2 (the untracked files) does not contain file f
A merge of 2 and 5 with a merge base of 0 leads to a conflict. The 5
commit wants to modify the file and the 2 commit wants to delete the
file -> conflict.
If no merge base is set then the semantic is correct.
Thanks to Bow for finding this bug and providing the test case.
Bug: 485467
Change-Id: I453fa6ec337f81b2a52c4f51f23044faeec409e6
Also-by: Bow Ruggeri <bow@bow.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When performing a "reset --hard" a checkout is done. The pathes are
checked for potential checkout conflicts. But in the end for all
remaining conflicts these files are simply deleted from the working
tree. That's not the right strategy to handle checkout conflicts during
"reset --hard". Instead for every conflict we should simply checkout the
merge commit's content.
This is different from native gits behavior which reports errors when
during a "checkout --hard" a file shows up where a folder was expected.
"warning: unable to unlink d/c.txt: Not a directory"
Why it is like that in native git was asked in
http://permalink.gmane.org/gmane.comp.version-control.git/279482. Unless
it is explained why native git why this error is reported JGit should
overwrite the files.
Bug: 474842
Change-Id: I08e23822a577aaf22120c5137eb169b6bd08447b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
git-apply allows modifying file modes in patched files using either
"new mode" or "new file mode" headers. This patch adds support for
setting files as executables and vice-versa.
Change-Id: I24848966b46f686f540a8efa8150b42e0d9c3ad1
Signed-off-by: Nadav Cohen <nadavcoh@gmail.com>
Before this fix, getting the value of 'key' below used to return
value1. This fix makes it so that value3 gets returned instead,
just like native git's get.
[section]
key = value1
key = value2
key = value3
Change-Id: Iccb24de9b63c3ad8646c909494ca3f8c9ed6e29c
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.3:
Scan loose ref before packed in case gc about to remove the loose
Fix possible NPEs when reporting transport errors
Fix calling of clean/smudge filters from Checkout,MergeCommands
Fix ApplyCommand when result of patch is an empty file
Change-Id: I0dc76b7a8c87ce8e0386a1b9e0fa92a3aa62abf7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn