LockFile.lock() will create it anyway when the config file is created.
Bug: 565637
Change-Id: I078b89a695193fd76f130f6de7ac1cf26d2f8f0f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Otherwise locking problems may ensue if the JGit config itself is
on a different file system. Since the internal is already updated,
it is not really important when exactly the value gets persisted.
By queueing up separate Runnables executed by a single thread we
avoid concurrent write access to the JGit config, and nested calls
to getFileStoreAttributes(Path) result in serialized attempts to
write.
The thread for writing the config must not be a daemon thread. If
it were, JVM shutdown might kill it anytime, which may lead to
the config not being written, or worse, a config.lock file being
left behind.
Bug: 566170
Change-Id: I07e3d4c5e029d3cec9ab5895002fc4e0c7948c40
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If the background job is a little late, the true result might
arrive and be cached later. So make sure we don't cache the large
fallback resolution in the per-directory cache. Otherwise we'd work
with the large fallback until the next restart.
Bug: 566170
Change-Id: I7354a6cfddfc0c05144bb0aa41c23029bd4f6af0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git never converts line endings if the version in the repository is a
text file with CR/LF and text=auto. See [1]: "When the file has been
committed with CRLF, no conversion is done."
Because the sentence just before is about converting line endings on
check-in, I had understood that in commit 60cf85a [2] to mean that no
conversion on check-in was to be done. However, as bug 565048 and a
code inspection of the C git code showed it really means no conversion
is done on check-in *or check-out*.
If the text attribute is not set but core.autocrlf = true, this is
the same as text=auto eol=crlf. C git does not convert on check-out
even on text=auto eol=lf if the index version is a text file with
CR/LF.
For check-in, one has to look at the intended target, which is done
in WorkingTreeIterator since commit 60cf85a. For check-out, it can
be done by looking at the source and can thus be done in the
AutoLFOutputStream.
Additionally, provide a constructor for AutoLFInputStream to do
the same; for cases where the equivalent of a check-out is done via
an input stream obtained from a blob. (EGit does that in its
GitBlobStorage for the Eclipse compare framework; it's more efficient
than using a TemporaryBuffer and DirCacheCheckout.getContent(), and
it avoids the need for a temporary file.)
Adapt existing tests, and add new checkout and merge tests to verify
the resulting files have the correct line endings.
EGit's GitBlobStorage will need to call the new version of
EolStreamTypeUtil.wrapInputStream().
[1] https://git-scm.com/docs/gitattributes#Documentation/gitattributes.txt-Settostringvalueauto
[2] https://git.eclipse.org/r/c/jgit/jgit/+/127324
Bug: 565048
Change-Id: If1282ef43e2abd00263541bd10a01fe1f5c619fc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The WindowCache is configured statically with a default
WindowCacheConfig. The default config says (for backwards
compatibility reasons) to publish the MBean. As a result,
the MBean always gets published.
By delaying the MBean registration until the first call to
getInstance() or get(PackFile, long) we can avoid the forced
registration and do it only if not re-configured in the meantime
not to publish the bean. (As is done by Egit, to avoid a very
early costly access to the user and system config during plug-in
activation.)
Bug: 563740
Change-Id: I8a941342c0833acee2107515e64299aada7e0520
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Index format version 4 was introduced in C git in 2012. It's about
time that JGit can deal with it.
Version 4 added prefix path compression. Instead of writing the full
path for each index entry to disk, only the difference to the previous
entry's path is written: a variable-encoded int telling how many bytes
to remove from the previous entry's path to get the common prefix,
followed by the new suffix.
Also, cache entries in a version 4 index are not padded anymore.
Internally, version 3 and version 4 index entries are identical; it's
only the stored format that changes.
Implement this path compression, and make sure we write an index file
that we read previously in the same format. (Only changing from version
2 to version 3 if there are extended flags.)
Add support for the "feature.manyFiles" and the "index.version" git
configs, and honor them when writing a new index file.
Add tests, including a compatibility test that verifies that JGit can
read a version 4 index generated by C git and write an identical
version 4 index.
Bug: 565774
Change-Id: Id83241cf009e50f950eb42f8d56b834fb47da1ed
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The timeout on RemoteSession.exec() cannot be a timeout for the
whole command. It can only be a timeout for setting up the process;
after that it's the application's responsibility to implement some
timeout for the execution of the command, for instance by calling
Process.waitFor(int, TimeUnit) or through other means.
Sessions returned by an SshSessionFactory are already connected and
authenticated -- they must be, because RemoteSession offers no
operations for connecting or authenticating a session.
Change the implementation of SshdExecProcess.waitFor() to wait
indefinitely. The original implementation used the timeout from
RemoteSession.exec() because of that erroneous javadoc.
Change-Id: I3c7ede24ab66d4c81f72d178ce5012d383cd826e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
SshSupport.runSshCommand() had a comment that wait with time-out
could not be used because JSchProcess.exitValue() threw the wrong
unchecked exception when the process was still running.
Fix this and make JSchProcess.exitValue() throw the right exception,
then wait with a time-out in SshSupport.
The Apache sshd client's SshdExecProcess has always used the correct
IllegalThreadStateException.
Add tests for SshSupport.runCommand().
Change-Id: Id30893174ae8be3b9a16119674049337b0cf4381
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If I create a repository containing an empty file and clone it
with
git clone --no-checkout --filter=blob:none \
https://url/of/repository
then I would expect no blobs to be transferred over the wire. Alas,
JGit rewrites filter=blob:none to filter=blob:limit=0, so if the
repository contains an empty file then the empty blob gets
transferred.
Fix it by teaching JGit about filters based on object type to
complement the existing filters based on object size. This prepares
us for other future filters such as object:none.
In particular, this means we do not need to look up the size of the
filtered blobs, which should speed up clones. Noticed by Anna
Pologova and Terry Parker.
Change-Id: Id4b234921a190c108d8be2c87f54dcbfa811602a
Signed-off-by: Jonathan Nieder <jrn@google.com>
Teach the FilterSpec serialization code about tree filters so they can
be communicated over the wire and understood by the server.
While we're here, harden the FilterSpec serialization code to throw
IllegalStateException if we encounter a FilterSpec that cannot be
expressed as a "filter" line. The only public API for creating a
Filterspec is to pass in a "filter" line to be parsed, so these should
not appear in practice.
Change-Id: I9664844059ffbc9c36eb829e2d860f198b9403a0
Signed-off-by: Jonathan Nieder <jrn@google.com>
OS X ships with a default /usr/bin/git that is just a wrapper that
at run-time delegates to the selected XCode toolchain, and that
prompts the user to install the XCode command line tools if not
already installed.
This is annoying for people who don't want to do so, since they'll
be prompted on each Eclipse start. Also, since on OS X the $PATH for
applications started via the GUI is not the same as the $PATH as set
via the shell profile, just using /usr/bin/git (which will normally
be found when JGit runs inside Eclipse) may give slightly surprising
results if the user has installed a non-Apple git and changed his
$PATH in the shell such that the non-Apple git is used in the shell.
(For instance by placing /usr/local/bin earlier on the path.) Eclipse
and the shell will use different git executables, and thus different
git system configs.
Therefore, try to find git via bash --login -c 'which git' not only
if we couldn't find it on $PATH but also if we found the default git
/usr/bin/git. If that finds some other git, use that. If the bash
approach also finds /usr/bin/git, double check via xcode-select -p
that an XCode git is present. If not, assume there is no git installed,
and work without any system config.
Bug: 564372
Change-Id: Ie9d010ebd9437a491ba5d92b4ffd1860c203f8ca
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Using a fixed thread pool with unbounded LinkedBlockingQueue fixes the
RejectedExecutionException thrown if too many threads try to
concurrently determine filesystem attributes.
Comparing that to an alternative implementation using an unbounded
thread pool instead showed similar performance with the reproducer (in
range of 100-1000 threads in reproducer) on my mac:
threads time
fixed threadpool up to 5 threads with LinkedBlockingQueue of unlimited
queue size
100 1103 ms
200 1602 ms
300 2369 ms
500 4002 ms
1000 11071 ms
unbounded cached threadpool
100 1108 ms
200 1591 ms
300 2299 ms
500 4577 ms
1000 11196 ms
Bug: 564202
Change-Id: I773da7414a1dca8e548349442dca9b56643be946
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Include implementation version in jgit library. This version is used
by other products that depend on JGit, and built using Bazel and not
consume officially released artifact from Central or Eclipse own Maven
repository.
Most notably, in Gerrit Code Review JGit agent that was previously
reported as "unknown", is now reported as:
JGit/v5.8.0.202006091008-r-16-g14c43828d
using this change [1].
[1] https://gerrit-review.googlesource.com/c/gerrit/+/272505
Change-Id: Ia50de9ac35b8dbe9e92d8ad7d0d14cd00f057863
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
In JGit 5.0, the FileTreeIterator was changed to skip ignored folders
by default. To catch tracked files inside ignored folders, the tree
walk needs to have a DirCacheIterator, and the FileTreeIterator has
to know about that DirCacheIterator via setDirCacheIterator(). (Or
the optimization has to be switched off explicitly via
setWalkIgnoredDirectories(true).)
Skipping ignored directories is an important optimization in some
cases, for instance in node.js/npm projects, where we'd otherwise
traverse the whole huge and deep hierarchy of the typically ignored
node_modules folder.
While all uses of WorkingTreeIterator in JGit had been adapted,
DiffFormatter was forgotten. To make it work correctly (again) also
for such cases, make it set up a WorkingTreeeIterator automatically,
and make sure the WorkingTreeSource can find such files, too. Also
pass the repository to the TreeWalks used inside the DiffFormatter
to pick up the correct attributes, filters, and line-ending settings.
Bug: 565081
Change-Id: Ie88ac81166dc396ba28b83313964c1712b6ca199
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make sure we don't produce a spurious empty line at the end.
Bug: 564428
Change-Id: Ib991d93fbd052baca65d32a7842f07f9ddeb8130
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The message "Too many commands" implies there is a hard limit on the
number of commands, which isn't the case. The limit is on the total
size of the received data, as explained in change I84317d396 which
introduced the configuration setting receive.maxCommandBytes:
shorter reference names allow for more commands, longer reference
names permit fewer commands per batch.
Change the message to:
Commands size exceeds limit defined in receive.maxCommandBytes
Change-Id: I678b78f919b2fec8f8058f3403f2541c26a5d00e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
MergedReftable ignores the last reftable in the stack while calculating the
minUpdateIndex.
Update the loop indices to include all reftables in the minUpdateIndex
calculation, while skipping position 0 as it is read outside the loop.
Change-Id: I12d3e714581e93d178be79c02408a67ab2bd838e
Signed-off-by: Minh Thai <mthai@google.com>
Currently we're buffering the inflated bitmap entry in
BasePackBitmapIndex to optimize running time. However, this will use
lots of memory during the creation of the pack bitmap index file.
And change 161456, which rewrote the entire getBitmap method, increased
the fetch latency significantly.
This commit introduces getBitmapWithoutCaching method which is used in
the pack bitmap index file creation only and aims to save memory during
garbage collection and not increase fetch latency.
Change-Id: I7b982c9d4e38f5f6193eaa03894e894ba992b33b
Signed-off-by: Yunjie Li <yunjieli@google.com>
The current mechanism for updating the unpack error handler requires
that the error handler is replaced entirely, including communicating
the error to the user. Adding a getter means that delegating
implementations can be constructed so that the error can be processed
before sending to the user, for example for logging.
Change-Id: I4b6f78a041d0f6f5b4076a9a5781565ca3857817
Signed-off-by: Jack Wickham <jwickham@palantir.com>
* stable-5.7:
ObjectDirectoryInserter: Open FileOutputStream in try-with-resource
ObjectDirectoryInserter: Remove redundant 'throws' declarations
ObjectDirectory: Further clean up insertUnpackedObject
ObjectDirectory: Explicitly handle NoSuchFileException
ObjectDirectory: Fail immediately when atomic move is not supported
Change-Id: I05186baa517388680fcc6825c940c4c772f26d32
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
ObjectWritingException and FileNotFoundException are subclasses
of IOException, which is already declared. Error does not need
to be explicitly declared.
Change-Id: I879820a33e10ec3a7ef676adc9c9148d2b3c4b27
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
- The code to move the file is repeated. Split it out into a
utility method.
- Remove the catch block for AtomicMoveNotSupportedException which
is redundant because it's handled in exactly the same way as the
IOException further down. The only exception we need to explicitly
handle differently in this block is NoSuchFileException.
- Improve the comments.
Change-Id: Ifc5490953ffb25ecd1c48a06289eccb3f19910c6
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The shutdown method releases
- ThreadLocal held by NLS
- GlobalBundleCache used by NLS
- Executor held by WorkQueue
Bug: 437855
Bug: 550529
Change-Id: Icfdccd63668ca90c730ee47a52a17dbd58695ada
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If a hunk does not apply at the position stated in the hunk header
try to determine its position using the old lines (context and
deleted lines).
This is still a far cry from a full git apply: it doesn't do binary
patches, it doesn't handle git's whitespace options, and it's perhaps
not the fastest on big patches. C git hashes the lines and uses these
hashes to speed up matching hunks (and to do its whitespace magic).
Bug: 562348
Change-Id: Id0796bba059d84e648769d5896f497fde0b787dd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Running recent error prone version complaining on that code:
CharacterHead.java:22: error: [ProtectedMembersInFinalClass] Make
members of final classes package-private: <init>
protected CharacterHead(char expectedCharacter) {
^
(see https://errorprone.info/bugpattern/ProtectedMembersInFinalClass)
Did you mean 'CharacterHead(char expectedCharacter) {'
Bug: 562756
Change-Id: Ic46a0b07e46235592f6e63db631f583303420b73
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
On the first attempt to move the temp file, NoSuchFileException can
be raised if the destination folder does not exist. Instead of handling
this implicitly in the catch of IOException and then continuing to
create the destination folder and try again, explicitly catch it and
create the destination folder. If any other IOException occurs, treat
it as an unexpected error and return FAILURE.
Subsequently, on the second attempt to move the temp file, if ANY kind
of IOException occurs, also consider this an unexpected error and
return FAILURE.
In both catch blocks for IOException, add logging at ERROR level.
Change-Id: I9de9ee3d2b368be36e02ee1c0daf8e844f7e46c8
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If atomic move is not supported, AtomicMoveNotSupportedException will
be thrown on the first attempt to move the temp file. There is no
point attempting the move operation a second time because it will only
fail for the same reason.
Add an immediate return of FAILURE on the first occasion. Remove the
unnecessary handling of the exception in the second block.
Change-Id: I4658a8b37cfec2d7ef0217c8346e512968d0964c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Running recent error prone version complaining on that code:
RefDatabase.java:444: error: [InvalidInlineTag] Tag name `linkObjectId`
is unknown.
* Includes peeled {@linkObjectId}s. This is the inverse lookup of
^
(see https://errorprone.info/bugpattern/InvalidInlineTag)
Bug: 562756
Change-Id: If91da51d5138fb753c0550eeeb9e3883a394123d
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Motivation: JSch serves as 'default' implementations of the SSH
transport. If a client application does not use it then there is no need
to pull in this dependency.
Move the classes depending on JSch to an OSGi fragment extending the
org.eclipse.jgit bundle and keep them in the same package as before
since moving them to another package would break API. Defer moving them
to a separate package to the next major release.
Add a new feature org.eclipse.jgit.ssh.jsch feature to enable
installation. With that users can now decide which of the ssh client
integrations (JCraft JSch or Apache Mina SSHD) they want to install.
We will remove the JCraft JSch integration in a later step due to the
reasons discussed in bug 520927.
Bug: 553625
Change-Id: I5979c8a9dbbe878a2e8ac0fbfde7230059d74dc2
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Motivation: BouncyCastle serves as 'default' implementation of
the GPG Signer. If a client application does not use it there is no need
to pull in this dependency, especially since BouncyCastle is a large
library.
Move the classes depending on BouncyCastle to an OSGi fragment extending
the org.eclipse.jgit bundle. They are moved to a distinct internal
package in order to avoid split packages. This doesn't break public API
since these classes were already in an internal package before this
change.
Add a new feature org.eclipse.jgit.gpg.bc to enable installation. With
that users can now decide if they want to install it.
Attempts to sign a commit if org.eclipse.jgit.gpg.bc isn't available
will result in ServiceUnavailableException being thrown.
Bug: 559106
Change-Id: I42fd6c00002e17aa9a7be96ae434b538ea86ccf8
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
If the determination of the user home directory produces a Java File
object with an invalid path, spurious exceptions may occur at the
most inopportune moments anytime later. In the case in the linked bug
report, start-up of EGit failed, leading to numerous user-visible
problems in Eclipse.
So validate the return value of FS.userHomeImpl(). If converting that
File to a Path throws an exception, log the problem and fall back to
Java system property user.home. If that also is not valid, use null.
(A null user home directory is allowed by FS, and calling in Java
new File(null, "some_string") is fine and produces a File relative
to the current working directory.)
Bug: 563739
Change-Id: If9eec0f9a31a45bd815231706285c71b09f8cf56
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make it possible to programmatically suppress the JMX bean
registration. In EGit it is not needed but can be rather costly
because it occurs during plug-in activation and accesses the
git user config.
Bug: 563740
Change-Id: I07ef7ae2f0208d177d2a03862846a8efe0191956
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Only the presence or absence of whitespace is significant; but not the
actual whitespace characters. Don't compare whitespace bytes.
Compare the C git implementation at [1].
[1] https://github.com/git/git/blob/0d0e1e8/xdiff/xutils.c#L173
Bug: 563570
Change-Id: I2d0522b637ba6b5c8b911b3376a9df5daa9d4c27
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This reverts commit 3aee92478c, which
increased fetch latency significantly.
Change-Id: Id31a94dff83bf7ab2121718ead819bd08306a0b6
Signed-off-by: Yunjie Li <yunjieli@google.com>
A builder API provides a more convenient way to define a customized
SshdSessionFactory by hiding the subclassing.
Also provide a new interface SshConfigStore to abstract away the
specifics of reading a ssh config file, and provide a way to customize
the concrete ssh config implementation to be used. This facilitates
using an alternate ssh config implementation that may or may not be
based on files.
Change-Id: Ib9038e8ff2a4eb3a9ce7b3554d1450befec8e1e1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Avoid trying other authentication methods on SocketException or on
InterruptedIOException. SocketException is rather fatal, such as
nothing listening on the peer's port, connection reset, or it could
be a connection time-out.
Time-outs enforced by Timeout{Input,Output}Stream may result in
InterruptedIOException being thrown.
In both cases, it makes no sense to try other authentication methods,
and doing so may wrongly report "authentication not supported" or
"cannot open git-upload-pack" or some such instead of reporting a
time-out.
Bug: 563138
Change-Id: I0191b1e784c2471035e550205abd06ec9934fd00
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Config core.eol is to be ignored if core.autocrlf is true or input.[1]
JGit didn't do so when core.autocrlf=input was set.
[1] https://git-scm.com/docs/git-config#Documentation/git-config.txt-coreeol
Bug: 561877
Change-Id: I5e62e0510d160b5113c1090319af09c2bc1bcb59
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
In Git 2.10.0 the interpretation of gitattributes changed or was fixed
such that "* text=auto eol=crlf" would indeed still do auto-detection
of text vs. binary content.[1] Previously this was identical to
"* text eol=crlf", i.e., treating all files as text.
JGit still did the latter, which caused surprises because it changed
binary files.
[1] https://github.com/git/git/blob/master/Documentation/RelNotes/2.10.0.txt#L248
Bug: 561341
Change-Id: I5b6fb97b5e86fd950a98537b6b8574f768ae30e5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Update dependency to Bouncy Castle to 1.65.
Add the IssuerFingerprint as a hashed sub-packet in the signature. If
added unhashed, GPG ignores it.
Bug: 553206
Change-Id: I6807e8e2385e6ec5790f388e4753a44aa9474ebb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
OSGi semantic versioning allows breaking implementers in a minor
release.
Change-Id: Ib55dc43dd3b50b0ef39a7094190f230210aee4b6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* changes:
PackBitmapIndex: Set distance threshold
PackBitmapIndex: Not buffer inflated bitmap in BasePackBitmapIndex
PackBitmapIndex: Remove convertedBitmaps in the Remapper
PackBitmapIndex: Reduce memory usage in GC
PackBitmapIndex: Add AddToBitmapWithCacheFilter class
PackBitmapIndex: Add util methods and builder to BitmapCommit
PackBitmapIndex: Move BitmapCommit to a top-level class
Refactor: Make retriveCompressed an method of the Bitmap class
Setting the distance threshold to 2000 in PackWriterBitmapPreparer to
reduce memory usage in garbage collection. When the threshold is 0, GC
for the msm repository would use about 37 GB memory to complete. After
setting it to 2000, GC can finish in 75 min with about 10 GB memory.
Change-Id: I39783eeecbae58261c883735499e61ee1cac75fe
Signed-off-by: Yunjie Li <yunjieli@google.com>
Currently we're buffering the inflated bitmap entry in BasePackBitmapIndex
to optimize running time. However, this will use lots of memory during
the construction of the pack bitmap index file which may cause failure of
garbage collection.
The running time didn't increase significantly, if there's any increase,
after removing the buffering here. The report about usage of time/memory
will come in the next commit.
Change-Id: I874503ecc85714acab7ca62a6a7968c2dc0b56b3
Signed-off-by: Yunjie Li <yunjieli@google.com>
The convertedBitmaps serves for time-optimization purpose. But it's
actually not saving time much but using lots of memory. So remove the
field here to save memory.
Currently the remapper class is only used in the construction of the
bitmap index file. And during the preparation of the file, we're only
getting bitmaps from the remapper when finding objects accessible from
a commit, so bitmap associated with each commit will only be fetched once
and thus the convertedBitmaps would hardly be read, which means that it's
not saving time.
Change-Id: Ic942a8e485135fb177ec21d09282d08ca6646fdb
Signed-off-by: Yunjie Li <yunjieli@google.com>
Currently, the garbage collection is consistently failing for some large
repositories in the building bitmap phase, e.g.Linux-MSM project:
https://source.codeaurora.org/quic/la/kernel/msm-3.18
Historically, bitmap index creation happened in 3 phases:
1. Select the commits to which bitmaps should be attached.
2. Create all bitmaps for these commits, stored in uncompressed format
in the PackBitmapIndexBuilder.
3. Deltify the bitmaps and write them to disk.
We investigated the process. For phase 2 it's most efficient to create
bitmaps starting with oldest commit and moving to the newest commit,
because the newer commits are able to reuse the work for the old ones.
But for bitmap deltification in phase 3, it's better when a newer
commit's bitmap is the base, and the current disk format writes bitmaps
out for the newest commits first.
This change introduces a new collection to hold the deltified and
compressed representations of the bitmaps, keeping a smaller subset of
commits in the PackBitmapIndexBuilder to help make the bitmap index
creation more memory efficient.
And in this commit, we're setting DISTANCE_THRESHOLD to 0 in the
PackWriterBitmapPreparer, which means the garbage collection will not
have much behavoir change and will still use as much memory as before.
Change-Id: I6ec2c3e8dde11805af47874d67d33cf1ef83660e
Signed-off-by: Yunjie Li <yunjieli@google.com>
Add a new revwalk filter, AddToBitmapWithCachedFilter. This filter updates
a client-provided {@code BitmapBuilder} as a side effect of a revwalk.
Similar to {@code AddToBitmapFilter}, it short circuits the walk when it
encounters a commit which is included in the provided bitmap's BitmapIndex.
It also short circuits the walk if it encounters the client-provided
cached commit.
Change-Id: I62cb503016f4d3995d648d92b82baab7f93549a9
Signed-off-by: Yunjie Li <yunjieli@google.com>
Add some utility methods and a builder class for BitmapCommit class in
preparation for improving the memory footprint of GC's bitmap generation
phase.
Change-Id: Ice3d257fc26f3917a65a64eaf53b508b89043caa
Signed-off-by: Yunjie Li <yunjieli@google.com>
Move BitmapCommit from inside the PackWriterBitmapPreparer to a new
top-level class in preparation for improving the memory footprint of GC's
bitmap generation phase.
Change-Id: I4d404a5b3a34998b441d23105197f33d32d39670
Signed-off-by: Yunjie Li <yunjieli@google.com>
Make retrieveCompressed() a method of Bitmap interface to avoid type
casting and later reuse in improving the memory footprint of GC's bitmap
generation phase.
Change-Id: I098d85105cf17af845d43b8c71b4ca48b02fd7da
Signed-off-by: Yunjie Li <yunjieli@google.com>
When downloading LFS objects also accept response code 203 as successful
download. This response may be seen when downloading via a proxy.
Bug: 563022
Change-Id: Iee85fdb451b33369d08859872e5bfc2a67dffa6d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Introduce an IterativeConnectivityChecker which runs a connectivity
check with a filtered set of references, and falls back to using the
full set of advertised references.
It uses references during first check attempt:
- References that are ancestors of an incoming commits (e.g., pushing
a commit onto an existing branch or pushing a new branch based on
another branch)
- Additional list of references we know client can be interested in
(e.g. list of open changes for Gerrit)
We tested it inside Google and it improves connectivity for certain
topologies. For example connectivity counts for
chromium.googlesource.com/chromium/src:
percentile_50: 1923 (was: 22777)
percentile_90: 23272 (was: 353003)
percentile_99: 345522 (was: 353435)
This saved ~2 seconds on every push to this repository.
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: I6543c2e10ed04622ca795b195665133e690d3b10
Moving transport related internal classes into dedicated subpackage in
o/e/j/internal package.
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: I21ed029d359f5f7d8298f102efbb4b1dcdf404ad
Fix NullPointerException occurring when calling
CheckoutCommand with forced == true option when
the branch isn't changed and there is deleted
uncommitted file.
Change-Id: I99bf1fc25e6889f07092320d7bc2772ec5d341b5
Signed-off-by: Nail Samatov <sanail@yandex.ru>
When applying a patch that contains renames or copies using ApplyCommand,
also apply all hunks that apply to the renamed or copied file.
Change-Id: I9f3fa4370458bd7c14beeb2e2b49e846d70203cb
Signed-off-by: Jack Wickham <jwickham@palantir.com>
Before this change, applying a patch will fail if the destination directory
doesn't exist; after, the necessary parent directories are created.
If renaming the file fails, the directories won't be deleted, so this change
isn't atomic. However, ApplyCommand is already not atomic - if one hunk fails
to apply, other hunks still get applied - so I don't think that is a blocker.
Change-Id: Iea36138b806d4e7012176615bcc673756a82f365
Signed-off-by: Jack Wickham <jwickham@palantir.com>
ObjectReachabilityChecker interface is the only public API. The
implementation is instantiated by ObjectWalk and doesn't need to be
visible outside the package.
Change-Id: I5b97bb98990cded637686bdc15c9655330b7780f
Signed-off-by: Ivan Frade <ifrade@google.com>
The bitmap-bassed object reachability checker, tries to find the objects
in the first starter, then adding the second starter... and so on. This
rewards passing the most popular refs first.
Order the refs with heads first, then tags, then others (e.g. changes)
for the object reachability checker. Using streams, delay also the
resolution of the ref to RevObject until necessary.
Change-Id: I9414b76754d7c0ffee1e2eeed6939895c8e92cbe
Signed-off-by: Ivan Frade <ifrade@google.com>
ObjectWalk#createObjectReachabilityChecker() returns the best
implementation for the repo. UploadPack can use the interface and fold
the with/without commits cases in one code path.
Change-Id: I857c11735d1d8e36c3ed8185ff11de8a62e86540
Signed-off-by: Ivan Frade <ifrade@google.com>
Extract ObjectReachabilityChecker interface from the walk-based
implementation, to add a bitmapped based implementation later.
Refactor the test case to use it for both implementations.
Change-Id: Iaac7c6b037723811956ac22625f27d3b4d742139
Signed-off-by: Ivan Frade <ifrade@google.com>
Preparing the code to optimize the bitmap-based object reachability
checker. We are mirroring first the commit reachability checker
structure (interface + 2 implementations).
Move the walk-base reachability checker to its own class.
This class is public at the moment. Later ObjectWalk will return an
interface and this implementation will be package-private.
Change-Id: Ifac70094e1af137291c3607d95e689992f814b26
Signed-off-by: Ivan Frade <ifrade@google.com>
After negotiation phase of a fetch, the advertised ref map is no longer used and
can be safely cleared. For >1GiB repos object selection and packfile writing may
take 10s of minutes. For the chromium.googlesource.com/chromium/src repo, this
advertised ref map is >400MiB. Returning this memory to the Java heap is a major
scalability win.
Change-Id: I00d453c5ef47630c21f199e333e1cfcf47b7e92a
Signed-off-by: Minh Thai <mthai@google.com>
Multiple whitespaces are not normalized when reading properties files,
therefore leading to unwanted space/indentation in console or UI output.
Change-Id: I1f5224fe359e0cac493e0237872afc75dc8b9fbe
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
(cherry picked from commit ebbc3efce7)
Multiple whitespaces are not normalized when reading properties files,
therefore leading to unwanted space/indentation in console or UI output.
Change-Id: I1f5224fe359e0cac493e0237872afc75dc8b9fbe
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Since reftables might have update index ranges that are overlapped.
Change-Id: I8f8215b99a0a978d4dd0155dbaf33e5e06ea8202
Signed-off-by: Minh Thai <mthai@google.com>
(cherry picked from commit 06748c205c)
Ensure files are writable before trying to delete them.
Bug: 408846
Change-Id: I930a547594bba853c33634ae54bd64d236afade3
Signed-off-by: Alexander Nittka <alex@nittka.de>
* stable-5.7:
FS.runInShell(): handle quoted filters and hooksPath containing blanks
Handle non-normalized index also for executable files
Prepare 5.7.1-SNAPSHOT builds
JGit v5.7.0.202003110725-r
Change-Id: I8a8580e44bfa05989d476cf22a029abd4fd407c6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.6:
FS.runInShell(): handle quoted filters and hooksPath containing blanks
Handle non-normalized index also for executable files
Change-Id: I240377e87c073ee7a621a88e39fc319c59fa037a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Revert commit 2323d7a. Using $0 in the shell command call results in
the command string being taken literally. That was introduced to fix
a problem with backslashes, but is actually not correct.
First, the problem with backslashes occurred only on Win32/Cygwin,
and has been properly fixed in commit 6f268f8.
Second, this is used only for hooks (which don't have backslashes in
their names) and filter commands from the git config, where the user
is responsible for properly quoting or escaping such that the commands
work.
Third, using $0 actually breaks correctly quoted filter commands
like in the bug report. The shell really takes the command literally,
and then doesn't find the command because of quotes.
So revert this change.
At the same time there's a related problem with hooks. If the path to
the hook contains blanks, runInShell() would also fail to find the
hook. In this case, the command doesn't come from user input but is
just a Java File object with an absolute path containing blanks. (Can
occur if core.hooksPath points to such a path with blanks, or if the
repository has such a path.)
The path to the hook as obtained from the file system must be quoted.
Add a test for a hook path with a blank.
This reverts commit 2323d7a1ef.
Bug: 561666
Change-Id: I4d7df13e6c9b245fe1706e191e4316685a8a9d59
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change-Id: Ifb8227cb62370029d6774f2a22b15d6478c713ca
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
ReceiveCommand can have an error message. This is shown only for some
cases even if it's set. This change uses the error message if it's set,
and fallback to the default message if unset.
Change-Id: I8d906e71ad08cf49bcdb28caea8fcc66798c68ff
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Commit 60cf85a4 corrected the handling of check-in for files where
the index version is non-normalized, i.e., contains CR-LF line endings.
However, it did so only for regular files, not executable files.
Bug: 561438
Change-Id: I372cc990c5efeb00315460f36459c0652d5d1e77
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Since reftables might have update index ranges that are overlapped.
Change-Id: I8f8215b99a0a978d4dd0155dbaf33e5e06ea8202
Signed-off-by: Minh Thai <mthai@google.com>
The recursive merge strategy builds a virtual ancestor merging
recursively the common bases (when more than one) between the
want-to-merge commits. While building this virtual ancestor, content
conflicts are ignored, but current code doesn't do so when a file is
removed.
This was spotted in [1], for example. Merging two commits to build the
virtual ancestor bumped into a conflict (modified in one side, deleted
in the other) that stopped the process.
Follow the "spec" and in case of conflict leave the unmerged content in
the index and working trees.
[1] https://android-review.googlesource.com/c/kernel/common/+/1228962
Change-Id: Ife9c32ae3ac3a87d3660fa1242e07854b65169d5
Signed-off-by: Ivan Frade <ifrade@google.com>
Allow explicitly setting the tag option for the remote configuration
when cloning a repository.
Bug: 561021
Change-Id: Iac43268a2bb231ae7599c3255bf555883d34fa32
Signed-off-by: Alexander Nittka <alex@nittka.de>
The error message for an Exception thrown by StartGenerator when given
both the TOPO flag and the TOPO_KEEP_BRANCH_TOGETHER flag mentions a
non-existent flag, TOPO_NON_INTERMIX. The error message was introduced
in commit e498d43.
Replace TOPO_NON_INTERMIX with TOPO_KEEP_BRANCH_TOGETHER in the error
message of an Exception thrown by the StartGenerator when the TOPO flag
is provided together with the TOPO_KEEP_BRANCH_TOGETHER flag.
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: Id24640dc08e96a196508fe38ce144aa7e035082f
The topological sort algorithm in TopoSortGenerator for RevWalk may mix
multiple lines of history, producing results that differ from C git's
git-log whose man page states: "Show no parents before all of its
children are shown, and avoid showing commits on multiple lines of
history intermixed." Lines of history are mixed because
TopoSortGenerator merely delays producing a commit until all of its
children have been produced; it does not immediately produce a commit
after its last child has been produced.
Therefore, add a new RevSort option called TOPO_KEEP_BRANCH_TOGETHER
with a new topo sort algorithm in TopoNonIntermixGenerator. In the
Generator, when the last child of a commit has been produced, unpop
that commit so that it will be returned upon the subsequent call to
next(). To avoid producing duplicates, mark commits that have not yet
been produced as TOPO_QUEUED so that when a commit is popped, it is
produced if and only if TOPO_QUEUED is set.
To support nesting with other generators that may produce the same
commit multiple times like DepthGenerator (for example, StartGenerator
does this), do not increment parent inDegree for the same child commit
more than once.
Commit b5e764abd2 modified the existing
TopoSortGenerator to avoid mixing lines of history, but it was reverted
in e40c38ab08 because the new behavior
caused problems for EGit users. This motivated adding a new Generator
for the new behavior.
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: Icbb24eac98c00e45c175b01e1c8122554f617933
RFC 7538[1] added HTTP response code 308, signifying a permanent
redirect that, contrary to the older 301, does not allow changing
the request method from POST to GET.
[1] https://tools.ietf.org/html/rfc7538
Bug: 560936
Change-Id: Ib65f3a3ed75db51d74d1fe81d4abe6fe92b0ca12
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Does not fix any issue but prevents user from shooting themselves in the
foot with improper configuration.
Suggested by Demetr Starshov at https://git.eclipse.org/r/#/c/157681/
Change-Id: I006d65022f0a7d4066970825d00080c59404fdc3
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The FS.setAsyncFileStoreAttributes() static method calls
FileStoreAttributes.setBackground() as its implementation, but there are
other public attributes on this inner class already and there isn't a
real reason why this needs to be private.
By making it public we allow callers to be able to invoke it directly.
Although it doesn't appear that it would make a difference, by calling a
static method on the FS class, all static fields and the transitive
closure of class dependencies must be loaded and initialised, which can
be non-trivial.
Callers referring to FS.setAsyncFileStoreAttributes() may be replaced
with FS.FileStoreAttributes.setBackground() with no change of behaviour
other than improved performance due to less class loading required.
Bug: 560527
Change-Id: I9538acc90da8d18f53fd60d74eb54496857f93a5
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
The change Ic0b974fa (c217d33, "Documentation/technical/reftable:
improve repo layout") defines a new repository layout, which was
agreed with the git-core mailing list.
It addresses the following problems:
* old git clients will not recognize reftable-based repositories, and
look at encompassing directories.
* Poorly written tools might write directly into
.git/refs/heads/BRANCH.
Since we consider JGit reftable as experimental (git-core doesn't
support it yet), we have no backward compatibility. If you created a
repository with reftable between mid-Nov 2019 and now, you can do the
following to convert:
mv .git/refs .git/reftable/tables.list
git config core.repositoryformatversion 1
git config extensions.refStorage reftable
Change-Id: I80df35b9d22a8ab893dcbe9fbd051d924788d6a5
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.6:
Cygwin expects forward slashes for commands to be run via sh.exe
Make Logger instances final
Move array designators from the variable to the type
Change-Id: I9a5dc570deb478525bf48ef526d8cba5b19418bf
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
FS_Win32_Cygwin replaces backslashes by / as a side-effect of
relativize(). When support for core.hooksPath was added, paths were
relativized in a different place using Path.resolve(), which doesn't
do that transformation. As a result hooks could not be run on Cygwin
in some cases.
Do the transformation in FS_Win32_Cygwin.runInShell(). In all other
places, File or Path objects are used, which give no guarantee about
the file separator (typically the system-dependent default separator),
so doing the transformation earlier still wouldn't guarantee that
sh.exe indeed gets a command string using forward slashes.
Bug: 558577
Change-Id: I3c07eb85f0ac7c5628a2e92f990e5cdb7ecf532f
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Running the JDT cleanup action for using a for-each loop on jgit
Change-Id: Ie724d8bbdff786ab0167089e90a9914a8135103c
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
As reported by Sonar Lint:
Array designators should always be located on the type for better code
readability. Otherwise, developers must look both at the type and the
variable name to know whether or not a variable is an array.
Change-Id: If6b41fed3483d0992d402d8680552ab4bef89ffb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
currVisit could be null if a blob is marked as start point in
ObjectWalk. Add null check before skipping current tree.
Change-Id: Ic5d876fe2800f3373d136979be6c27d1bbd38dc1
Signed-off-by: Yunjie Li <yunjieli@google.com>
This reverts commit b5e764abd2.
PlotWalk uses the TopoSortGenerator, which is causing problems for EGit users
who rely on the emission of commits being somewhat based on date as in the
previous topo-sort algorithm.
Bug: 560529
Change-Id: I3dbd3598a7aeb960de3fc39352699b4f11a8c226
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
KnownHosts (implementing HostKeyRepository) in Jsch can return null
which could cause NullPointerException in Stream.of(...)
Change-Id: Iddcf5f34f8c8475a85ca7ae018bbe48d1b3fbbc0
Signed-off-by: Lajos Olah <lajos.olah.jr@gmail.com>
* stable-5.6:
Revert "Prepend hostname to subsection used to store file timestamp resolution"
SimilarityRenameDetector: Fix inconsistent indentation
Use indexOf(char) and lastIndexOf(char) rather than String versions
Reorder modifiers to follow Java Language Specification
GitmoduleEntry: Remove redundant import of class from same package
Remove redundant "static" qualifier from enum declarations
Change-Id: Ibb66bef7e8373f81e3e653c9843d986243446d68
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This reverts commit e102bbed99.
Resolving the hostname comes with a performance penalty. We no longer
store the timestamp resolution in the global git config which might be
copied around to other machines but in a dedicated jgit config meant for
automatically determined options like timestamp resolution. Hence there
is no strong reason anymore to have a hardware specific identifier in
the subsection name of file timestamp resolution options.
Bug: 560414
Change-Id: If8dcabe981eb1792db84643850faa6033f14b1cf
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Provide a static factory method to create a PathMatcher.
Bug: 559526
Change-Id: Ib7a4a1bcc658ac2f2a09d365b5b891669dfd7570
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Replace space indentation with tab indentation
Change-Id: Ic130d3bde5d3a73d8f5c6225974153573722d05b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
An indexOf or lastIndexOf call with a single letter String can be
made more performant by switching to a call with a char argument.
Found with SonarLint.
As a side-effect of this change, we no longer need to suppress the
NON-NLS warnings.
Change-Id: Id44cb996bb74ed30edd560aa91fd8525aafdc8dd
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The Java Language Specification recommends listing modifiers in
the following order:
1. Annotations
2. public
3. protected
4. private
5. abstract
6. static
7. final
8. transient
9. volatile
10. synchronized
11. native
12. strictfp
Not following this convention has no technical impact, but will reduce
the code's readability because most developers are used to the standard
order.
This was detected using SonarLint.
Change-Id: I9cddecb4f4234dae1021b677e915be23d349a380
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
# By Matthias Sohn (3) and Han-Wen Nienhuys (1)
* stable-5.6:
Update API problem filter
Prepare 5.6.2-SNAPSHOT builds
JGit v5.6.1.202002131546-r
Simplify ReftableCompactor
Change-Id: I16ed174f9fc662934c3ebaea85a60690efbed1c6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The topological sort algorithm in TopoSortGenerator for RevWalk may mix
multiple lines of history, producing results that differ from C git's
git log whose man page states: "Show no parents before all of its
children are shown, and avoid showing commits on multiple lines of
history intermixed." Lines of history are mixed because
TopoSortGenerator merely delays a commit until all of its children have
been produced; it does not immediately produce a commit after its last
child has been produced.
Therefore, when the last child of a commit has been produced, unpop the
commit so that it will be returned upon the subsequent call to next() in
TopoSortGenerator. To avoid producing duplicates, mark commits that
have not yet been produced as TOPO_QUEUED so that when a commit is
popped, it is produced if and only if TOPO_QUEUED is set.
To support nesting with other generators that may produce the same
commit multiple times like DepthGenerator (for example, StartGenerator
does this), do not increment parent inDegree for the same child commit
more than once.
Modify tests that assert that TopoSortGenerator mixes lines of commit
history.
Change-Id: I4ee03c7a8e5265d61230b2a01ae3858745b2432b
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
The ReftableCompactor supported a byteLimit, but this is currently
unused. The FileReftableStack has a more sophisticated strategy that
amortizes compaction costs.
Rename min/maxUpdateIndex to reflogExpire{Min,Max}UpdateIndex to
reflect their purpose more accurately.
Since reflogs are generally pruned chronologically (oldest entries are
expired first), one can only prune entries on full compaction, so they
should not be set by default.
Rephrase the function Reader#minUpdateIndex and maxUpdateIndex. These
vars are documented to affect log entries, but semantically, they are
about ref entries. Since ref entries have their timestamps
delta-compressed, it is important for the min/maxUpdateIndex values to
be coherent between different tables.
The logical timestamps for log entries do not have to be coherent in
different tables, as the timestamps of a log entry is part of the key.
For example, a table written at update index 20 may contain a tombstone
log entry at timestamp 1.
Therefore, we set ReftableWriter's min/maxUpdateIndex from the merged
tables we are compacting, rather than from the compaction settings
(which should only control reflog expiry.)
The previous behavior could drop log entries erroneously, especially
in the presence of tombstone log entries. Unfortunately, testing this
properly requires both an API for adding log tombstones, and a more
refined API for controlling automatic compaction. Hence, no test.
Change-Id: I2f4eb7866f607fddd0629809e8e61f0b9097717f
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
* stable-5.6:
reftable: don't check deadline on the first try
reftable: clarify comment
reftable: clear cache on full compaction
reftable: remove outdated comment
reftable: clarify that LogCursor may return a null ReflogEntry
Change-Id: I9458a746311984fa687b3da964805e2568ed37f3
The merged table contains handles to open files. A full compaction
causes those files to be closed, and so further lookups would fail
with EBADF.
Change-Id: I7bb74f7228ecc7fec9535b00e56a617a9c18e00e
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Using the batch cleanup operation via Source -> Cleanup -> "Use lambdas
where possible" from standard JDT.
Change-Id: I5452bd94fdccc920ade071228aeed3a8b9fdbe62
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
Commit 6216b0de changed the behavior of the setMirror(),
setCloneAllBranches(), and setBranchesToClone() operations. Before
that commit, these could be set and reset independently and only in
call() it would be determined what exactly to do. Since that commit,
the last of these calls would determine the operation. This means
that the sequence
cloneCommand.setCloneAllBranches(true);
cloneCommand.setBranchesToClone(/* some list of refs */);
would formerly do a "clone all" giving a fetch refspec with wildcards
+refs/heads/*:refs/remotes/origin/*
which picks up new upstream branches, whereas since commit 6216b0de
individual non-wildcard fetch refspecs would be generated and new
upstream branches would not be fetched anymore.
Undo this behavioral change. Make the operations independently settable
and resettable again, and determine the exact operation only in call():
mirror=true > cloneAll=true > specific refs, where ">" means "takes
precedence over", and if none is set assume cloneAll=true.
Note that mirror=true implies setBare(true).
Bug: 559796
Change-Id: I7162b60e99de5e3e512bf27ff4113f554c94f5a6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When fetching remote objects, WalkFetchConnection searches remote
packs in the order provided by WalkRemoteObjectDatabase:getPackNames.
Previously, for TransportAmazonS3, the packs were in no particular
order. This resulted in potential many extra calls to get pack idx
files.
This change modifies TransportAmazonS3 and AmazonS3 so that
getPackNames returns a list sorted with the most recently modified
packs first. In the case of fetching recent changes to a repo,
this dramatically reduces the number of packs searched and speeds
up fetch.
Note: WalkRemoteObjectDatabase::getPackNames does not specify
the order of the returned names.
Testing: did "mvn clean install" in root dir and all tests passed.
And manually constructed some S3 repos and using jgit.sh
confirmed that the freshest pack was checked first.
Change-Id: I3b968fee825e793be55566e28c2d69d0cbe53807
Signed-off-by: Joshua Redstone <redstone@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.7:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Add config constants for WindowCache configuration options
Change-Id: I0538bcba259f7229790a602ac9de120464a1260d
* stable-5.6:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Add config constants for WindowCache configuration options
Change-Id: I79d615dff66493b60d3a4bcbdc57b9455e8d6673
* stable-5.5:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Add config constants for WindowCache configuration options
Change-Id: I73d16b53df02bf735c2431588143efe225a4b5b4
* stable-5.4:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Add config constants for WindowCache configuration options
Change-Id: I76a62da98182f0c504b1ea8b7d37cecdf4eea7e0
* stable-5.3:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Add config constants for WindowCache configuration options
Change-Id: I12002dbfed9dff14fc6d2df9787d92eab5b1fa78
* stable-5.2:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Add config constants for WindowCache configuration options
Change-Id: I790098be00ff3f9b8278d54ae4fb7c11311816e9
* stable-5.1:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Change-Id: I741059a1d0d5950ab5bc16ec70352655ee926a24
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The externalized error message added in f4fc640 ("BasePackConnection:
Check for expected length of ref advertisement", Dec 18, 2019) uses a
malformed string format. Since there is only one formatting argument,
it should be referenced with '{0}' rather than '{1}'.
Change-Id: Ibda864dfb0bb902fe07ae4bba73117b212046e8a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Since ObjectDatabase and PackFile don't know their repository use the
packfile's grand-grand-parent directory as an identifier for the
repository the packfile resides in.
Remove metric for a repository if the number of cached bytes for the
repository drops to 0 in order to ensure the map of cached bytes per
repository doesn't contain repositories which have no data cached in the
WindowCache.
Change-Id: I969ab8029db0a292e7585cbb36ca0baa797da20b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The default threads from the ForkJoinPool run without any privileges
when a SecurityManager is installed, leading to SecurityExceptions
when trying to create the probe file even if the application otherwise
has write privileges in the directory.
Use a dedicated ThreadPoolExecutor using daemon threads instead.
Bug: 551690
Change-Id: Id5376f09f0d7da5ceea367e1f0dfc70f823d62d3
Signed-off-by: Alex Jitianu <alex_jitianu@sync.ro>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Enable UnusedException at ERROR level which causes the build to fail
in many places with:
[UnusedException] This catch block catches an symbol and re-throws
another, but swallows the caught symbol rather than setting it as a
cause. This can make debugging harder.
Fix it by setting the caught exception as cause on the subsequently
thrown exception.
Note: The grammatically incorrect error message is copy-pasted as-is
from the version of ErrorProne currently used in Bazel; it has been
fixed by [1] in the latest version.
[1] https://github.com/google/error-prone/commit/d57a39c
Change-Id: I11ed38243091fc12f64f1b2db404ba3f1d2e98b5
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If setInstance(SshSessionFactory) is called with parameter null
set default session factory using the newly introduced service loader
instead of hard-coding the default factory class.
Change-Id: I86b5932333cc53b706534a2822e0fd96e12e6e47
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use ServiceLoader and define
org.eclipse.jgit.transport.DefaultSshSessionFactory in
META-INF/services/org.eclipse.jgit.transport.SshSessionFactory so that
the legacy behavior is still the same.
Bug: 553625
Change-Id: Id1a65506140d921ed76d83699e3817f0d2ca08ed
Signed-off-by: Emmanuel Hugonnet <ehugonne@redhat.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Java GC evicts all SoftReferences when the used heap size comes close to
the maximum heap size. This means peaks in heap memory consumption can
flush the complete WindowCache which was observed to have negative
impact on performance of upload-pack in Gerrit.
Hence add a boolean option core.packedGitUseStrongRefs to allow using
strong references to reference packfile pages cached in the WindowCache.
If this option is set to true Java gc can no longer flush the
WindowCache to free memory if the used heap comes close to the maximum
heap size. On the other hand this provides more predictable performance.
Bug: 553573
Change-Id: I9de406293087ab0fa61130c8e0829775762ece8d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* added new public method getContent()
* changed checkoutEntry() to use the new getContent() method
* changed runExternalFilterCommand() parameter "entry" to "path" to be
independent from DirCacheEntry type
* removed runExternalFilterCommand() parameter "fs" as it can be derived
from repo
Bug: 356832
Change-Id: If8991b74870e0d8728093e98a990f93f1871b76a
Signed-off-by: Andre Bossert <andre.bossert@siemens.com>
* stable-5.1:
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Add config constants for WindowCache configuration options
Change-Id: I17da3c5183eca536aa2be3972bc5df45c9d75f1b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Using exceptions during normal operations - for example with the
desire of expanding an array in the failure case - can have a
severe performance impact. When exceptions are instantiated,
a stack trace is collected. Generating stack trace can be expensive.
Compared to that, checking an array for length - even if done many
times - is cheap since this is a check that can run in just a
handful of CPU cycles.
Change-Id: Ifaf10623f6a876c9faecfa44654c9296315adfcb
Signed-off-by: Patrick Hiesel <hiesel@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Protected field ReceivePack.connectivityChecker is of type
ConnectivityChecker which was located in internal package
org.eclipse.jgit.transport and was thus leaking an internal type.
In order to fix this move ConnectivityChecker to package
org.eclipse.jgit.transport.
Change-Id: Idc0af75502faf39f13a56157bbb6964d24720eb8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.6:
Fix API problem filters
Fix unclosed resource warning in SmartOutputStream
JschConfigSessionFactory: fix boxing warning
SshSupport#runSshCommand: don't throw exception in finally block
Don't override already managed maven-compiler-plugin version
Remove unused import from CreateFileSnapshotBenchmark
Remove duplicate ignore_optional_problems entry in .classpath
Update maven-site-plugin used by benchmark module to 3.8.2
Add dependency to enable site generation for benchmark module
Ignore warnings for generated source code in
org.eclipse.jgit.benchmark
Fix MBean registration
Enhance WindowCache statistics
Change-Id: I4a77c602bfffed60535d0b8fc251a552b128068d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.5:
Fix API problem filters
Fix unclosed resource warning in SmartOutputStream
JschConfigSessionFactory: fix boxing warning
SshSupport#runSshCommand: don't throw exception in finally block
Don't override already managed maven-compiler-plugin version
Remove unused import from CreateFileSnapshotBenchmark
Remove duplicate ignore_optional_problems entry in .classpath
Update maven-site-plugin used by benchmark module to 3.8.2
Add dependency to enable site generation for benchmark module
Ignore warnings for generated source code in
org.eclipse.jgit.benchmark
Fix MBean registration
Enhance WindowCache statistics
Change-Id: I11f9a387ac3dc7d22a4f2e70bb8d89169b4e9afe
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.4:
Fix API problem filters
Fix unclosed resource warning in SmartOutputStream
JschConfigSessionFactory: fix boxing warning
SshSupport#runSshCommand: don't throw exception in finally block
Don't override already managed maven-compiler-plugin version
Remove unused import from CreateFileSnapshotBenchmark
Remove duplicate ignore_optional_problems entry in .classpath
Update maven-site-plugin used by benchmark module to 3.8.2
Add dependency to enable site generation for benchmark module
Ignore warnings for generated source code in
org.eclipse.jgit.benchmark
Fix MBean registration
Enhance WindowCache statistics
Change-Id: I78902d5feecb2c09134b64ec2f3b48b2c3bab37d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.3:
Fix API problem filters
Fix unclosed resource warning in SmartOutputStream
JschConfigSessionFactory: fix boxing warning
SshSupport#runSshCommand: don't throw exception in finally block
Don't override already managed maven-compiler-plugin version
Remove unused import from CreateFileSnapshotBenchmark
Remove duplicate ignore_optional_problems entry in .classpath
Update maven-site-plugin used by benchmark module to 3.8.2
Add dependency to enable site generation for benchmark module
Ignore warnings for generated source code in
org.eclipse.jgit.benchmark
Fix MBean registration
Enhance WindowCache statistics
Change-Id: I1b560b36d169cfa02cc5450ad0fa0bd85f9f42d8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.2:
Fix API problem filters
Fix unclosed resource warning in SmartOutputStream
JschConfigSessionFactory: fix boxing warning
SshSupport#runSshCommand: don't throw exception in finally block
Don't override already managed maven-compiler-plugin version
Remove unused import from CreateFileSnapshotBenchmark
Remove duplicate ignore_optional_problems entry in .classpath
Update maven-site-plugin used by benchmark module to 3.8.2
Add dependency to enable site generation for benchmark module
Ignore warnings for generated source code in
org.eclipse.jgit.benchmark
Fix MBean registration
Enhance WindowCache statistics
Change-Id: I67a07d92718188bdf7f8a13b83e9f538ecf4b22f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
SSLContext.getInstance("TLS") by default behaves differently on IBM
JDK than on Oracle or OpenJDK.[1] On IBM JDK one gets sockets that
have only TLSv1 enabled, which makes HTTPS connections fail since most
servers refuse this old protocol version. On Oracle JDK/OpenJDK, one
gets sockets with all available protocol versions enabled.
Explicitly enable all available TLS protocol versions to make
HTTPS connections work also on IBM JDK.
[1] https://www.ibm.com/support/knowledgecenter/en/SSYKE2_8.0.0/com.ibm.java.security.component.80.doc/security-component/jsse2Docs/matchsslcontext_tls.html#matchsslcontext_tls
Bug: 558709
Change-Id: I5ffc57a78e67a6239b9dad54840a49a8ed28930a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.6:
Hooks: avoid problems with backslashes in paths
Change-Id: Ia9e4aca11de5a465b60898a37441a17133f6355b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Calling sh -c with a script path containing backslashes may fail since
the shell may try to process them as escape characters.
Instead of calling
sh.exe -c 'C:\path\script "$@"' 'C:\path\script' other args
call
sh.exe -c '$0 "$@"' 'C:\path\script' other args
which avoids this escape processing.
Note that this is not specific to Windows. If the path or the script
name contain backslashes, this also occurs on Unix.
Bug: 558577
Change-Id: I47d63db6f8644f956c55c42b07dbcad7d7f305aa
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
StringBuffer is synchronized which is slower and should be replaced with
StringBuilder according to its Javadoc.
Change-Id: If4d4a5a49da289ded34bbec97132ab7636b937cc
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
When converting to reftable format the option extensions.refStorage must
be set to "reftable" [1]. When converting back to refdir format this
config option needs to be removed.
Introduce constants for refStorage config options, also for the
"reftree" format.
[1] https://git.eclipse.org/r/plugins/gitiles/jgit/jgit/+/master/Documentation/technical/reftable.md#Version-1
Change-Id: I190222fa5edc1ad7309daa9be17ca934ff7971e3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
and switch over strings where possible. Sometimes if statements are
chained and form a series of comparisons against constants. Using switch
statements improves readability.
Bug: 545856
Change-Id: Iacb78956ee5c20db4d793e6b668508ec67466606
Signed-off-by: Carsten Hammer <carsten.hammer@t-online.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.6:
Add ability to redirect stderr from git hooks
Add possibility to get pure stderr output from AbortedByHookException
Change-Id: Ifc02675542dad6ced25fdd8b9fae80b5736db688
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This will change the behavior in the CLI to resemble that of C-Git more
closely by printing the stderr of the hooks to the CLI stderr
independently of the exit code of the hook.
This is also useful for the corresponding EGIT-Change, which will add
the ability to show the hook output in eclipse.
With this also the stderr can be shown even if the exit code is 0.
Bug: 553471
Change-Id: Ie7bc503fe39e270e9b93dd1108b5879f02a12b4c
Signed-off-by: Tim Neumann <Tim.Neumann@advantest.com>
This is a preparation for the corresponding EGit change to remove
redundant output in the aborted by commit hook popup.
Bug: 553469
Change-Id: Id5f39a4df659fafc9d951668e6f53fed4380de9d
Signed-off-by: Tim Neumann <Tim.Neumann@advantest.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the following statistics
- cache hit count and hit ratio
- cache miss count and miss ratio
- count of successful and failed loads
- rate of failed loads
- load, eviction and request count
- average and total load time
Use LongAdder instead of AtomicLong to implement counters in order to
improve scalability.
Optionally expose these metrics via JMX, they are registered with the
platform MBean server if the config option jmx.WindowCacheStats = true
in the user or system level git config.
Bug: 553573
Change-Id: Ia2d5246ef69b9c2bd594a23934424bc5800774aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.6:
Cleanup CommitAndLogCommandTest
CLI: Add support for excluding paths from Git log command
Change-Id: I2f48e16640ab1b13f0c32779422add3162260c50
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
- add missing @since tag on new field connectivityChecker
- suppress warning for this added field which may affect subclasses
which is ok
Change-Id: Id6c22258efd10fa3847290f3dcfa42893b6ae882
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Git log supports the exclude pathspec, which allows for excluding paths
from the log command. JGit only supports adding paths to the log
command. See the following StackOverflow question for details:
https://stackoverflow.com/questions/59143934/java-jgit-how-to-get-git-
commits-not-affecting-certain-directories
This commit adds an excludePath() method to the log command. It does not
yet support regex or glob wildcards.
Change-Id: I8cd59950b87850b55a15c7e2ea5470145c9aae28
Signed-off-by: John Tipper <john_tipper@hotmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Move all connectivity check to separate classes. Set default to be
FullConnectivityChecker i.e. checker which will check connectivity
from all advertised refs. Add ability to set other connectivity
checker which can use different approach.
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: Ibb107dbfbdde8ad109be25b5ecf42be7660ef736
This method was added in stable-5.6 after 5.6 RC1 was tagged. It's shown
as an API error when using 5.6.0 RC1 as the API baseline for master.
This suppression can be removed when 5.6 is released which will serve as
the API baseline for 5.7.
Change-Id: Ic6359fe59ed2d2a9431583b0854ec86bbac76880
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The reftable format supports fast inverse (SHA1 => ref) queries.
If the ref database does not support fast inverse queries, it may be
advantageous to build a complete SHA1 to ref map in advance for
multiple uses. To let applications decide, this function indicates
whether the inverse map is available.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: Idaf7e01075906972ec21332cade285289619c2b3
Same as UploadPack. These methods do not handle exceptions and the
caller can handle them. This makes it possible to customize the error
handling.
Change-Id: Ia5203f80133cb5b3e5d754859b4167ac920eaf14
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Currently, there's no way for a user to customize the error handler for
the exception happened during unpacking an incoming pack file. Create an
error handler class and let them specify one.
Change-Id: Id07638ee58c88e1365181c3ddd17ee0266f3934d
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Instead of dropping a second exception, use try-with-resources so that
exception thrown by a hook is attached as a suppressed exception.
This removes a need of holding an exception that is thrown while
unpacking an incoming packfile.
Change-Id: I74d8b944931abbf53d9d1ae5db2e889639fba027
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
BaseReceivePack#sendStatusReport anyway needs to know
CAPABILITY_REPORT_STATUS. By moving this flag to BaseReceivePack,
simplify the status reporting code.
Change-Id: Iaa0878b1fc13057b687a7f01d25c85fd78c0423e
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
This gives a chance to handle an exception for a user. For example, when
an IOException is thrown while executing
`walk.parseAny(cmd.getNewId())`, it's always handled as
REJECTED_MISSING_OBJECT. However, IOException can mean a Git storage IO
error. By introducing an error handler class, a user can add a custom
error handler for these cases.
Change-Id: I3e03a536e1d8e137cb0f6e596d71642e72adde9e
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Move exception handling code to the caller side. This is a preparation
for adding a custom error handler that is similar to UploadPack.
Note that `catch (Throwable t)` will not affect the exception spec since
Java will do an analysis of rethrown exceptions. See
https://docs.oracle.com/javase/8/docs/technotes/guides/language/catch-multiple.html.
Change-Id: I973a63d4b079c2cd1402afb3f2956e18b7d5a00c
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
This removes a raw IOException at one level. Later we'll add a custom
exception handling mechanism like UploadPack.
Change-Id: I52a7423798c97b032d848351be8b6f144776b017
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
This partially reverts Ic6bb5e66. It made private some methods in
ReceivePack that were protected before. At least two of those methods
(#init and #receivePackAndCheckConnectivity) are used by out-of-tree
subclasses for tracing and testing.
Make ReceivePack#init() and ReceivePack#receivePackAndCheckConnectivity
protected again to allow tracing and testing.
Change-Id: I7ff22c091fbfc2d94009c449d58e7c5ac9f4f759
Signed-off-by: Ivan Frade <ifrade@google.com>
When a conflicting file was blamed, JGit would not identify lines
coming from the merge parents. The main cause for this was that
Blame and BlameCommand simply added the first DirCacheEntry found
for a file to its queue of candidates (blobs or commits) to consider.
In case of a conflict this typically is the merge base commit, and
comparing a auto-merged contents against that base would yield
incorrect results.
Such cases have to be handled specially. The candidate to be
considered by the blame must use the working tree contents, but
at the same time behave like a merge commit/candidate with HEAD
and the MERGE_HEADs as parents. Canonical git does something very
similar, see [1].
Implement that and add tests.
I first did this for the JGit pgm Blame command. When I then tried
to do the same in BlameCommand, I noticed that the latter also
included some fancy but incomplete CR-LF handling. In order to
be able to use the new BlameGenerator.prepareHead() also in
BlameCommand this CR-LF handling was also moved into BlameGenerator
and corrected in doing so.
(Just considering the git config settings was not good enough,
CR-LF behavior can also be influenced by .gitattributes, and even
by whether the file in the index has CR-LF. To correctly determine
CR-LF handling for check-in one needs to do a TreeWalk with at
least a FileTreeIterator and a DirCacheIterator.)
[1] https://github.com/git/git/blob/v2.22.0/blame.c#L174
Bug: 434330
Change-Id: I9d763dd6ba478b0b6ebf9456049d6301f478ef7c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When this class was split from DfsReftableDatabase in commit
2b1e942729 (reftable: split off generic
code from DFS code, 2019-09-26), we forgot to carry over the license
header.
Change-Id: I8698001dfb69f58784df643ef0185ab2d55e52aa
Reported-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Reftable-enabled repositories don't have a file called HEAD. Check for
reftable/ instead.
This fixes repository creation on reftable in Gerrit.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: I778c2be01d96aaf135affae4b457b5fe5b483bee
Following OSGi semantic versioning which tolerates breaking implementers
in a minor release.
Change-Id: I4600c5ee9cd4ae209b69870a5d1367f83678617e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The checker is creating a new bitmap per branch leading to excessive
memory consumption. For the reachability check one bitmap with the
reachability of all branches aggregated is enough.
Build the reachability bitmap with a filter. The filter itself uses it
to emit only commits not reached before and the caller to check what
targets have been reached already.
BitmapCalculator is not required anymore.
Change-Id: Ic5c62f77fe0f188913215b7eaa51d849a9aae6a5
Signed-off-by: Ivan Frade <ifrade@google.com>
The ref points to an ObjectId that then is translated into a RevCommit.
This translation can be costly and with the incremental reachability
check is probably not needed for most of the elements.
Delay the translation from ObjectId to RevCommit to when it is needed.
Use Streams, that have the laziness built-in, all the way from Ref to
RevCommit.
This should reduce the latency for reachability checks over big sets of
references.
Change-Id: I28693087321b2beff3eaa1f3d2e7840ab0eedc6d
Signed-off-by: Ivan Frade <ifrade@google.com>
Preparatory change. Converting ObjectIds to RevCommits is potentially
expensive and in the incremental reachability check, it is probably not
required for all elements in the collection.
Pass a Stream to the reachability checker. In the follow up we make
the conversion from ObjectId to RevCommit in the stream (i.e. on
demand). This should reduce the latency of reachability checks over big
sets of references.
Change-Id: I9f310e331de5b0bf8de34143bd7dcd34316d2fba
Signed-off-by: Ivan Frade <ifrade@google.com>
UploadPack needs to check if object ids that weren't advertised before
are reachable from the references visible to the user. In the
bitmap-based reachability check, this is done incrementally: checking
against one reference, if anything remaining adding a second and so on.
It is more efficient to check first more common references (e.g. refs/heads/*)
Sort the references for the reachability checker. This should solve the
connectivity earlier and require less bitmap creation and less memory.
Change-Id: I48ac10d71e29fab2d346479802401eaea4aacb5c
Signed-off-by: Ivan Frade <ifrade@google.com>
Use lambda style comparators where possible. They are easier to read.
Change-Id: I5b80cfcd90909c94286742fa83af71015532809f
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Reftable is a binary, block-based storage format for the ref-database.
It provides several advantages over the traditional packed + loose
storage format:
* O(1) write performance, even for deletions and transactions.
* atomic updates to the ref database.
* O(log N) lookup and prefix scans
* free from restrictions imposed by the file system: it is
case-sensitive even on case-insensitive file systems, and has
no inherent limitations for directory/file conflicts
* prefix compression reduces space usage for repetitive ref names,
such as gerrit's refs/changes/xx/xxxxx format.
FileReftableDatabase is based on FileReftableStack, which does
compactions inline. This is simple, and has good median performance,
but every so often it will rewrite the entire ref database.
For testing, a FileReftableTest (mirroring RefUpdateTest) is added to
check for Reftable specific behavior. This must be done separately, as
reflogs have different semantics.
Add a reftable flavor of BatchRefUpdateTest.
Add a FileReftableStackTest to exercise compaction.
Add FileRepository#convertToReftable so existing testdata can be
reused.
CQ: 21007
Change-Id: I1837f268e91c6b446cb0155061727dbaccb714b8
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Several methods were protected when they were defined in BaseReceivePack
which has since been squashed into ReceivePack. Those methods no longer
need to be protected, and can now be private instead.
Change-Id: Ic6bb5e66f353fcbdc7919847423234af398c88b4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>