FileBasedConfig should not rely on auto-detection of
the file-snapshot attribute computation based on config.
The check was already performed when a new FileBasedConfig
is created at L158:
// don't use config in this snapshot to avoid endless recursion
newSnapshot = FileSnapshot.saveNoConfig(getFile());
The check was missing though when the FileBasedConfig is saved
to disk and the new snapshot is obtained from the associated
LockFile.
This change fixes the issue by keeping a non-config based
FileSnapshot also after a FileBasedConfig is saved.
Bug: 577983
Change-Id: Id1e410ba687e683ff2b2643af31e1110b103b356
* stable-6.0:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
TreeRevFilter: fix wrong stop when the given path disappears
Change-Id: Id7540d03991cdcf6f405e946b8cbbcc6a9696a31
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.13:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
TreeRevFilter: fix wrong stop when the given path disappears
Change-Id: Ibd69e9d941ad9262b61dd0c4368e48cb82597a12
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.12:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: I6576872cc0f5dd452252fa6e4526086cdee65c28
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.11:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: Ib80336a42e22da729b9db1e573772504cc0a3e77
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.10:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: I9e79ea2a0c554a184e4ce3b13e375eac8b7a4ac5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.9:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: I2a84c838a886d1d6383c34f50b418baa743c57b0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.8:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: I88a629e571fec5a9820114ebf5765b5d94a276bd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.7:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: Ied786ab5e3c0dd05f701705fce2d4ad85502c4d6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.6:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: I454622dae6eb95aedbd858e3b12da72282d36673
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.5:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: I2622f1d384a88a556ba9d88f0d08a37af69e530c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.4:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: Ia1665dd92ccc3811a6116f41421a05aca10fc6eb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.3:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: I52a57a17abe60e30e3d7615f8cb4d0c5e6aebd9b
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.2:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: Id37f47a5ef2e3c8329eca30c171941f7e5606a85
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.1:
Revert "RefDirectory.scanRef: Re-use file existence check done in snapshot creation"
Change-Id: I625667c2718ab31ae7df907c3dd6024a933913b8
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This reverts commit f829f5f838.
Using MISSING_FILEKEY as indicator for a non-existing file doesn't work
on Windows.
Bug: 577954
Change-Id: I92102a3d259f6cc0f367096a3213cfa794466817
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When chgs[i] == adds[i], it indicated that a commit added some files
that pList[i] did not have, but didn't mean pList[i] is "empty tree
root".
Follow the example below:
. .
└── src └── src
└── d1 ==> └── d1
└─ file1 ├─ file1
└── file2
c.parents[i] c
The variable chg[i] equals to variable add[i],
but commit c.parents[i] is not "empty tree root".
We should add an additional check for no paths matching the filter.
Bug: 577227
Change-Id: I834e9ddd0de86b108b280a1139519ea962913b38
Signed-off-by: kylezhao <kylezhao@tencent.com>
Speed up bitmap creation by loading reverse index in parallel
to reading bitmap from storage. Latency changes from
(time_to_read_bitmap + time_to_load_reverse_index) to
max(time_to_read_bitmap, time_to_load_reverse_index).
Add new option to DfsReaderOptions to control parallel reverse index
loading. Static cached thread pool is added to PackBitmapIndexV1 for
reverse index loading, and when not in use consumes minimal resources.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: Ia37a1d739631d053e8bddb925ac8b0b81d22379e
Return immediately in scanRef if the loose ref was identified as
missing when a snapshot was attempted for the ref. This will help
performance of scanRef when the ref is packed but has a corresponding
empty dir in 'refs/'.
For example, consider the case where we create 50k sharded refs in
a new namespace called 'new-refs' using an atomic 'BatchRefUpdate'.
The refs are named like 'refs/new-refs/01/1/1', 'refs/new-refs/01/1/2',
'refs/new-refs/01/1/3' and so on. After the refs are created, the
'new-refs' namespace looks like below:
$ find refs/new-refs -type f | wc -l
0
$ find refs/new-refs -type d | wc -l
5101
At this point, an 'exactRef' call on each of the 50k refs without
this change takes ~2.5s, where as with this change it takes ~1.5s.
Change-Id: I926bc41b9ae89a1a792b1b5ec9a17b05271c906b
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Doing a getFileStoreAttributes call even when the file doesn't
exist is unnecessary. This call is particularly slow on some
filesystems. Instead, do it only when the file exists and load
the appropriate cache.
This update can help speed up RefDirectory.exactRef when the ref
is packed, but has a corresponding empty dir for it under 'refs/'.
This scenario can happen when an atomic 'BatchRefUpdate' creates
new sharded refs.
For example, consider the case where we create 50k sharded refs in
a new namespace called 'new-refs' using an atomic 'BatchRefUpdate'.
The refs are named like 'refs/new-refs/01/1/1', 'refs/new-refs/01/1/2',
'refs/new-refs/01/1/3' and so on. After the refs are created, the
'new-refs' namespace looks like below:
$ find refs/new-refs -type f | wc -l
0
$ find refs/new-refs -type d | wc -l
5101
At this point, an 'exactRef' call on each of the 50k refs without
this change takes ~30s, where as with this change it takes ~2.5s.
Change-Id: I4a5d4c6a652dbeed1f4bc3b4f2b2f1416f7ca0e7
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Let GC#gc return collection of newly created packs as CompletableFuture
to enable using gc() asynchronously.
Change-Id: I3627014fd458c738cfe54225e631d6f7d9cfb1a7
* stable-6.0:
FS: debug logging only if system config file cannot be found
FS: debug logging only if system config file cannot be found
Update .factorypath used by annotation processor for benchmarks
Use maven-compiler-plugin's release tag instead of source and target
Don't use deprecated Repository#getAllRefs in Repository
Don't use deprecated Repository#getAllRefs in FileRepository
RevListTest: fix warning that method parameter hides field 'git'
Implement RecordingLogger based on org.slf4j.Logger
Let ObjectDatabase implement AutoClosable
Change-Id: Ie6b3cfa66b319033d4448dcf20362b753c0e9d7c
The command 'git config --system --show-origin --list -z' fails if
the system config doesn't exist. Use debug logging instead of a
warning for failures of that command. Typically the user cannot do
anything about it anyway, and JGit will just work without system
config.
Bug: 577492
Change-Id: If628ab376182183aea57a385c169e144d371bbb2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The command 'git config --system --show-origin --list -z' fails if
the system config doesn't exist. Use debug logging instead of a
warning for failures of that command. Typically the user cannot do
anything about it anyway, and JGit will just work without system
config.
Bug: 577492
Change-Id: If628ab376182183aea57a385c169e144d371bbb2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
org.eclipse.jgit.internal.diffmergetool
org.eclipse.jgit.internal.fsck
This was broken with changes for bug 356832.
Bug: 356832
Change-Id: Id008d058769b4923d545a9373b45ceb3a3d27a08
Signed-off-by: Simeon Andreev <simeon.danailov.andreev@gmail.com>
see: http://git-scm.com/docs/git-difftool
* add command line support for "jgit difftool"
* show supported commands with "jgit difftool --help"
* added "git difftool --tool-help" to show the tools (empty now)
* prepare for all other commands
Bug: 356832
Change-Id: Ice0c13ef7953a20feaf25e7746d62b94ff4e89e5
Signed-off-by: Andre Bossert <andre.bossert@siemens.com>
Signed-off-by: Simeon Andreev <simeon.danailov.andreev@gmail.com>
Also expose the potentially IOException thrown by RefDatabase#getRefs.
Hence the following methods now potentially throw IOException:
- Repository#getAllRefsByPeeledObjectId
Bug: 534731
Change-Id: Id6956ff112560e6314d4335238494708346f2338
Also expose the potentially IOException thrown by RefDatabase#getRefs.
Hence the following methods now potentially throw IOException:
- AdvertiseRefsHook#advertiseRefs
- ReceivePack#setAdvertisedRefs
- Repository#getAdditionalHaves
Bug: 534731
Change-Id: I85bc6ce5815d40be5f80042c53f4663072d96be5
Provide a public interface PackLock exposing only the unlock() method.
Rename the internal PackLock class to PackLockImpl and have it implement
the new interface.
This way PackParser doesn't expose an internal class via its API
anymore, and client can still unlock pack locks that were created.
Bug: 576340
Change-Id: I976739f4ab28fe1f9ba7f35653a69a913aa68841
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Remove the unused parameter, which had a non-API type anyway.
Bug: 576340
Change-Id: Id71c01a643e1f31a8ff61ff69f7915c373db3263
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
While building the commit for the destination project, RepoCommand
catches GitApiExceptions and wraps them into ManifestErrorException
(a subclass of GitApiException). This hides the real exception from the
caller and prevent them to do a fine-grained catch.
Specifically this is problematic for gerrit's supermanifest plugin, that
won't see ConcurrentRefUpdate exceptions to detect lock-failures.
Use ManifestErrorException to wrap non-GitApiExceptions, let
GitApiExceptions pass through as they are.
Change-Id: Ia2cda244e65993bb07c89cd6435507d5d0754dd4
* stable-5.12:
Better git system config finding
Change-Id: Iebbae08b6bb6ef510ca07329df77223bc2128ec1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.11:
Better git system config finding
Change-Id: I47946b91658cb2e38709179b7a8513b1211431e4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.10:
Better git system config finding
Change-Id: I460d855ea7878b279dbaffa6eb7ce5ca93f4c12c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.9:
Better git system config finding
Change-Id: I1022d003e0d3b9d452abfed9ac49663d0a93c6e6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
We've used "GIT_EDITOR=edit git config --system --edit" to determine
the location of the git system config for a long time. But git 2.34.0
always expects this command to have a tty, but there isn't one when
called from Java. If there isn't one, the Java process may get a
SIGTTOU from the child process and hangs.
Arguably it's a bug in C git 2.34.0 to unconditionally assume there
was a tty. But JGit needs a fix *now*, otherwise any application using
JGit will lock up if git 2.34.0 is installed on the machine.
Therefore, use a different approach if the C git found is 2.8.0 or
newer: parse the output of
git config --system --show-origin --list -z
"--show-origin" exists since git 2.8.0; it prefixes the values with
the file name of the config file they come from, which is the system
config file for this command. (This works even if the first item in
the system config is an include.)
Bug: 577358
Change-Id: I3ef170ed3f488f63c3501468303119319b03575d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
(cherry picked from commit 9446e62733)
Use the GitAPIException CanceledException instead of IOException
CancelledException in the rename detector.
Change-Id: I5121719eb714a123ec57769fc113c84857bd3c6c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Skip javadoc generation for test bundles.
Use character entities < and > for < and > outside of
code-formatted spans.
Change-Id: I66e1a1dc98881c61f93c9e5561c5513896b2ba01
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
We've used "GIT_EDITOR=edit git config --system --edit" to determine
the location of the git system config for a long time. But git 2.34.0
always expects this command to have a tty, but there isn't one when
called from Java. If there isn't one, the Java process may get a
SIGTTOU from the child process and hangs.
Arguably it's a bug in C git 2.34.0 to unconditionally assume there
was a tty. But JGit needs a fix *now*, otherwise any application using
JGit will lock up if git 2.34.0 is installed on the machine.
Therefore, use a different approach if the C git found is 2.8.0 or
newer: parse the output of
git config --system --show-origin --list -z
"--show-origin" exists since git 2.8.0; it prefixes the values with
the file name of the config file they come from, which is the system
config file for this command. (This works even if the first item in
the system config is an include.)
Bug: 577358
Change-Id: I3ef170ed3f488f63c3501468303119319b03575d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
CommitConfig.getCommitTemplateContent() has changed API.
Change-Id: If72ed79c43c167b99f356b69cc095d6bbf4d66e8
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Fixes an issue that commit template file could not be found if it has a
relative path instead of absolute path.
Relative path is probably common if git config --local is used.
Bug: 446355
Change-Id: I8ddf2be672647be825fd9c01af82809d31bb8356
With change https://git.eclipse.org/r/c/jgit/jgit/+/186455 a thread
loading a bitmap index could hold two ref locks at the same time (one
for bitmap and one for either index or reverse index). So it is possible
that two threads loading bitmaps end up in a deadlock for ref locks e.g.
threadA has refLock[1] (for bitmap) and wants refLock[2] (for index or
revIndex) and threadB has refLock[2] (for bitmap) and wants refLock[1].
This change introduces separate pools of locks per pack extension
instead of a shared pool. So threads loading bitmap can hold two
locks but with different extensions and no overlap, e.g. threadA holds
refLock[BITMAP_INDEX][1] and refLock[INDEX][2] and threadB holds
refLock[BITMAP_INDEX][2] and refLock[INDEX][1].
More unit tests were added to cover various paralell loading scenarios.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: I89704b4721c21548929608d3798ef60925280755
We use BinaryBlobException to signal a binary blob was found and never
make use of its stack trace. Suppress filling in the stack trace to
avoid the performance penalty coming with that.
See https://shipilev.net/blog/2014/exceptional-performance/
Change-Id: Iae1f1c19a1fa8aef4f6569822557171130299958
Since OpenSSH 7.8, the ProxyJump directive accepts the value "none"[1]
to override and clear a setting that might otherwise be contributed by
another (wildcard) host entry.
[1] https://bugzilla.mindrot.org/show_bug.cgi?id=2869
Change-Id: Ia35e82c6f8c58d5c6b8040cda7a07b220f43fc21
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Bring our SSH config parser up-to-date with respect to changes in
OpenSSH. In particular, they fixed[1] the handling of line comments
such that #-characters inside strings are not considered. This means
that we have to parse strings with escaped quotes correctly.
[1] https://bugzilla.mindrot.org/show_bug.cgi?id=3288
Change-Id: Ifbd9014127e8d51e7c8792e237f3fc2a9a0719d2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
It appears that the OpenSSH documentation[1] has changed; it now allows
more flags for a number of keys.
[1] https://man.openbsd.org/ssh_config.5#TOKENS
Change-Id: I55df174f86a3fd4a6ef22687dc433ac9f9ad181d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Once a factory supports different SSH agents on the same platform,
which is planned for Windows once we use Apache MINA sshd 2.8.0,
client code may need to have a way to specify which SSH agent shall
be used when the SSH config doesn't define anything.
Add a mechanism by which a ConnectorFactory can tell what Connectors
it may provide. Client code can use this to set the identityAgent
parameter of ConnectorFactory.create() to the wanted default if it
would be null otherwise.
A ConnectorDescriptor is a pair of strings: an internal name, and a
display name. The latter is included because client code might want to
communicate agent names to the user, be it in error messages or in some
chooser dialog where a user could define which of several alternative
SSH agents should be used as default. The internal name is intended to
be used in the IdentityAgent directive in ~/.ssh/config.
Also make the ConnectorFactory discovered via the ServiceLoader
accessible and overrideable. Provide static get/setDefault() methods,
similar to the SshSessionFactory itself.
Change-Id: Ie3d077395d32dfddc72bc8627e92b23636938182
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This is a prerequisite for removing the JSch support bundle; otherwise
OpenSshConfigFile would be left without tests.
Copy OpenSshConfigTest from the JSch support bundle and adapt all tests
to perform the equivalent checks on OpenSshConfigFile directly. Add a
new lookupDefault() method to the SshConfigStore interface and implement
it so that it behaves the same and the tests work identically.
Change-Id: I046abd9197a8484003e77005024e5d973456f1a3
Make the default toolchain use Java 11, and fix two errorprone findings
introduced recently.
Change-Id: Iff51206fe8bdf096cb7d88cb1a499002550766cd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
C git considers not only files containing NUL bytes as binary but also
files containing lone CRs. Implement this also for JGit.
C git additionally counts printable vs. non-printable characters and
considers files that have non_printable_count > printable_count / 128
also as binary. This is not implemented because such counting probably
only makes sense if one looks at the full file or blob content. The
Auto[CR]LF* streams in JGit look only at the first few KiB of a stream
in order not to buffer too much.
For the C git implementation, see [1].
[1] https://github.com/git/git/blob/7e27bd589d/convert.c#L35
Bug: 576971
Change-Id: Ia169b59bdbf1477f32ee2014eeb8406f81d4b1ab
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Move the code to parse numbers with an optional 'k', 'm', or 'g' suffix
from the config file handling to StringUtils. This enables me to re-use
it in EGit, which has duplicate code in StorageSizeFieldEditor.
As this is generally useful functionality, providing it in the library
makes sense.
Change-Id: I86e4f5f62e14f99b35726b198ba3bbf1669418d9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The various streams used in JGit for text/binary and CR-LF detection
used different buffer sizes. Most used 8000, but one used 8KiB, and one
used 8096 (SIC!) bytes.
Considering only the first 8kB of a file/blob is not sufficient; it
may give behavior incompatible with C git. C git considers the whole
blob; since it uses memory-mapped files it can do so with acceptable
performance. Doing this in JGit would most likely incur a noticeable
performance penalty. But 8kB is a bit small; in the file in bug 576971
the limit was hit before the first CR-LF, which occurred on line 155
at offset 9759 in the file.
Make RawText.FIRST_FEW_BYTES only a default and minimum setting, and
set it to 8KiB. Make the actual buffer size configurable: provide
static methods getBufferSize() and setBuffersize(), and use
getBufferSize() throughout instead of the constant.
This enables users of the JGit library to set their own possibly larger
buffer size.
Bug: 576971
Change-Id: I447762c9a5147a521f73d2864ba59ed89f555d54
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add tests for files having been checked in with mixed LF and CR-LF
line endings, and then being checked out with text or text=auto and
eol=lf or eol=crlf. These test cases were missing, and thus commit
efd1cc05 missed that AutoCRLFOutputStream needs the same detection
as AutoLFOutputStream.
Fix AutoCRLFOutputStream to not convert line endings if the blob in
the repository contains CR-LF.
Bug: 575393
Change-Id: Id0c7ae772e282097e95fddcd3f1f9d82aae31e43
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
JEP 400 (Java 18) will change the default character set to UTF-8
unconditionally.[1] Introduce SystemReader.getDefaultCharset() that
provides the locale-dependent charset the way JEP 400 recommends.
Change all code locations using Charset.defaultCharset() to use the
new SystemReader method instead.
[1] https://openjdk.java.net/jeps/400
Change-Id: I986f97a410d2fc70748b6f93228a2d45ff100b2c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This change is a fix to http://git.eclipse.org/r/c/jgit/jgit/+/183562
that was reverted in http://git.eclipse.org/r/c/jgit/jgit/+/184978
due to deadlocks. Separate locks in DfsBlockFile are removed to rely
on getting value from DfsBlockCache with region locking in place.
With this change bitmap index creation is not blocked on index and
reverse index full initialization in DfsPackFile. Now bitmap index
and index could be read from storage in parallel in separate threads.
A unit test is added for parallel index loading.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: Ic6d9c5a4a254628636aa98a5008447a27a003f69
* stable-5.13:
Fix missing peel-part in lsRefsV2 for loose annotated tags
Fix RevWalk.getMergedInto() ignores annotated tags
Optimize RevWalk.getMergedInto()
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Add org.bouncycastle.bcutil to p2 repository
Change-Id: I789e3c84045cc9dcd8a26de34d09fc1e3ccc41e7
* stable-5.12:
Fix missing peel-part in lsRefsV2 for loose annotated tags
Fix RevWalk.getMergedInto() ignores annotated tags
Optimize RevWalk.getMergedInto()
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: Ie5da8d2d07f39ab5aaeca560040637635d4eb04c
* stable-5.11:
Fix missing peel-part in lsRefsV2 for loose annotated tags
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I2122b3966bddb10d43d439eb8c5d6cc4583c6ba6
* stable-5.10:
Fix missing peel-part in lsRefsV2 for loose annotated tags
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I23ccb89306263ce042ce782d881812d4b5187672
* stable-5.9:
Fix missing peel-part in lsRefsV2 for loose annotated tags
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Fix running benchmarks from bazel
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I4e7c7727ebfa9a7748477f2300bd66d775548ad6
We observed the following issue:
$ git tag -a v1.0 -m v1.0
$ git push origin tag v1.0
$ git ls-remote origin v1.0^{}
... empty result ...
On the server (Gerrit) side run git-gc to pack the refs:
$ git gc
Repeat the ls-remote from the client and the result is correct:
$ git ls-remote origin v1.0^{}
7ad85c810de3ae922903d4bdd17c53cd627260ba refs/tags/v1.0^{}
Unfortunately, the existing UploadPackTest didn't reveal this issue
although it provided the test case needed to do so: testV2LsRefsPeel.
This is because The UploadPackTest uses InMemoryRepository which
internally uses Dfs* implementations. The issue is only reproducible
when using the FileRepository.
It is a non-trivial task to refactor the UploadPackTest to work against
both InMemoryRepository and FileRepository and this change is not trying
to do that. This change creates a new test:
UploadPackLsRefsFileRepositoryTest and copies the necesssary code from
the UploadPackTest.
Change-Id: Icfc7d0ca63f1524bafe24c9626ce12ea72aa3718
Signed-off-by: Saša Živkov <sasa.zivkov@sap.com>
Let certain pack extensions that are expensive to load from storage
(e.g. pack index, bitmap index) stay in DFS block cache longer than
others by overriding default cache count through DfsBlockCacheConfig
Don't change default behavior when cache override map is empty. Use int
cacheCount instead of boolean hot for Ref<T>
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: I18062784ec9cc14dbba3e4bb8d9509440cf2d44f
If an annotated tag refers to a commit, we should not ignore it.
Change-Id: I77504f93636e9e984540e7d8535ef301adce6a80
Signed-off-by: kylezhao <kylezhao@tencent.com>
Transitive Relation Definition:
On the DAG of commit history, if A can reach B, C can reach A, then C
can reach B.
Example:
As is shown in the graph below:
1 - 2 - 3 - 4 (side)
\
5 - 6^ (master) - 7 (topic)
Find out which branches is 2 merged into:
After we calculated that master contains 2, we can mark 6 as TEMP_MARK
to avoid unwanted walks.
When we want to figure out if 2 is merge into the topic, the traversal
path would be [7, 6] instead of [7, 6, 5, 3, 2].
Test:
This change can significantly improve performance for tags.
On a copy of the Linux repository, the command 'git tag --contains
<commit>' had the following performance improvement:
commit | Before | After | Rel %
47a44d27ca | 29251ms | 6687ms | -77%
90327e7dff | 21388ms | 6256ms | -70%
f85fac0efa | 11150ms | 7338ms | -34%
The current version ignores tags, even though the tag is a type of
the ref.
Follow-up commits I'll fix it.
Change-Id: Ie6295ca4d16070499912af462239e679a97cce47
Signed-off-by: kylezhao <kylezhao@tencent.com>
Reviewed-by: Christian Halstrick <christian.halstrick@sap.com>
Reviewed-by: Martin Fick <mfick@codeaurora.org>
* stable-5.8:
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I9e66ef90dc9a65bac47b35705d679bf992bd72b9
* stable-5.7:
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I88c47ff57f4829baec5b19aad3d8d6bd21f31a86
* stable-5.6:
reftable: drop code for truncated reads
reftable: pass on invalid object ID in conversion
Update eclipse-jarsigner-plugin to 1.3.2
Change-Id: I1c18f5f435f4a4a86e0548a310dbfc74191e1ed5
To avoid a warning about a name clash with the field.
Change-Id: Ib1950486a9c63647e4240a268a3c9a7d613f3303
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
In Java 11 type arguments for anonymous subclasses can be inferred
and don't need to be specified. This resolves a number of compiler
warnings.
Change-Id: I55eff3babb7628aa0627085e65a1b45eb12c2cd3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This ensures the compiler compiles against the public, supported and
documented API for a specific VM version (here 11) [1]. This also means
that
we don't need EE descriptors in Eclipse anymore in order to ensure that
only supported APIs of the selected Java version can be used.
According to [2] if option --release is used --source and --target
options can't be used.
While we are at it also add default value for all new jdt core options
added in Eclipse 4.21.
[1] https://docs.oracle.com/en/java/javase/11/tools/javac.html
[2] https://docs.oracle.com/en/java/javase/14/docs/specs/man/javac.html#option-release
Change-Id: I852a5d7b0a3210751c15d79ec91915b4c01c41e2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The reftable format is a block based format, but allows for variably
sized blocks. This obviously happens for reflog blocks (which are zlib
compressed), but is also accepted for index blocks: In the spec, this
is motivated as
To achieve constant O(1) disk seeks for lookups the index must be
a single level, which is permitted to exceed the file's
configured block size, but not the format's max block size of
15.99 MiB.
Hence, when parsing a block, one cannot be sure of its exact size:
after reading a default-size block (eg. 4kb), the block header may
state that the block is in fact larger.
Before, the code would mark the block as `truncated`, noting
// Its OK during sequential scan for an index block to have been
// partially read and be truncated in-memory. This happens when
// the index block is larger than the file's blockSize. Caller
// will break out of its scan loop once it sees the blockType.
This looks like either
* a remnant of never-implemented functionality. There is no reason to
ever sequentially scan an index block.
* alluding to sequential scan of the data blocks before the index
blocks (eg. scanning refs, which ends when we find the first ref index
block, and we can then ignore the index block).
This comment is followed by code that populates the
restartTbl/restartCnt fields relative to the (possibly truncated)
buffer. If the buffer is truncated, this essentially reads garbage,
leading to OOB array access when using the index block.
Fix this by dropping the truncated logic and issuing a second read if
the first read was short.
Add a test.
We have never observed this failure scenario at Google. We use 64kb
blocksize, which requires us to need fewer index entries. The reftable
spec mentions an Android repo of size 36M. With 64kb blocks, that's
just 562 index entries. Even with historical growth, we are long from
requiring an index whose size exceeds a single block.
When adding the analogous test for seeking refs, there was no failure.
This points to another possibility which is that the code tries to
avoid writing large index blocks for refs.
I did not investigate further which one it is.
Fixes https://bugs.eclipse.org/bugs/show_bug.cgi?id=576250
Bug: 576250
Change-Id: I41ec21fac9e526ef57b3d6fb57b988bd353ee338
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Before, while trying to determine if an object ID was a tag or not,
the reftable conversion would yield an exception.
Change-Id: I3688a0ffa9e774ba27f320e3840ff8cada21ecf0
* master: (38 commits)
Revert "DFS block cache: Refactor to enable parallel index loading"
GitServlet: allow to override default error handlers
Silence API error for new interface method ProtocolV2Hook#onObjectInfo
transport: add object-info capability
Ignore IllegalStateException if JVM is already shutting down
Update orbit to R20210825222808 for 2021-09
Update spotbugs-maven-plugin to 4.3.0
Update ant to 1.10.11 also in pom.xml
DFS block cache: add additional stats to DfsReaderIoStats
Update Orbit to S20210817231813
[gpg] Better GPG home directory determination
FS: cleanup use of final modifier
Ensure FS#searchPath only selects executable files
RevWalk: getMergedInto's result is wrong on the second call
DFS block cache: Refactor to enable parallel index loading
[test] Create keystore with the keytool of the running JDK
[gpg] Update to Bouncy Castle 1.69
[test] Create keystore with the keytool of the running JDK
[sshd] Minor code clean-up
Support commit.template config property
...
Change-Id: I9f99e9a513a23c0c0d252334e79c351512d7355e
Sometimes it is useful to obtain metadata associated with an object
without the need to first download it locally. This is specially useful
when using partial clones.
This change implements the object-info capability that allows clients to
query the remote server for object metadata (currently only size). This
is a backport of the same capability that was recently added to the Git
project a2ba162cda (object-info: support for retrieving object info,
2021-04-20).
Signed-off-by: Bruno Albuquerque <bga@google.com>
Change-Id: I4dc9828e1c247f08b0976b8810be92d124366165
Trying to register/unregister a shutdown hook when the JVM is already in
shutdown throws an IllegalStateException. Ignore this exception since we
can't do anything about it.
Bug: 575367
Change-Id: Ic967c16c7f566c84778795315ab369e76668b364
New stats are populated in DfsPackFile to provide details about loading
pack, bitmap and reverse indexes.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: Ib6e8384ecc31821261e5099d0768c0b1227e8364
On Posix non executable files on the path should be ignored, on Windows
File#canExecute always returns true.
While we are here also add missing braces.
Bug: 575385
Change-Id: I80cd5057bdf9632a17f103db6f1356e975b6e150
Make sure the future user can reset all UNINTERESTING commmits after
this operation.
Signed-off-by: kylezhao <kylezhao@tencent.com>
Change-Id: I7549b9ff67bd31acd5dfc92331cb9a30b47b8278
With this change bitmap index creation is not blocked on index and
reverse index full initialization in DfsPackFile. Now bitmap index and index could be
read from storage in parallel in separate threads.
Update PackBitmapIndexV1 constructor to get packIndex and reverseIndex
suppliers instead of actual objects. Inner class IdxPositionBitmap was added to initialize pack objects after bitmap
index is fully read from storage. Update DfsPackFile and PackBitmapIndex
accordingly.
Signed-off-by: Alina Djamankulova <adjama@google.com>
Change-Id: Iea59ab58501b2acbbf9263412982ec9c6898a7ee
Adds functionality to read the git commit.template property. The
template content is read either via a default encoding or, if present,
via encoding specified by i18n.commitEncoding property.
Bug: 446355
Change-Id: I0c45db98e324ddff26a7e0262835f259d6528a86
Signed-off-by: Julian Ruppel <julian.ruppel@sap.com>
* master:
searchForReuse might impact performance in large repositories
Retry loose object read upon "Stale file handle" exception
Ignore missing javadoc in test bundles
Upgrade maven-dependency-plugin to 3.2.0
Upgrade jacoco-maven-plugin to 0.8.7
Upgrade maven-jxr-plugin to 3.1.1
Fix garbage collection failing to delete pack file
Fix PathSuffixFilter: can decide only on full paths
Update jetty to 9.4.42.v20210604
[sshd] Log the full KEX negotiation result
[releng] japicmp: update last release version
CONTRIBUTING: add explicit link to ECA
CONTRIBUTING: Use standard markdown format
Add Eclipse code of conduct and security policy
Change-Id: I9e31cb6e22f5398db6e220f71693e87475c598bd
Repository.getAllRefs() is deprecated and should not
be used anymore. Leverage the ref-db and the retrieval
of refs by prefix and adapt the result to the expected
refname/ref map.
Bug: 534731
Change-Id: I37a9092859f220ddc4e5063d01544f3e82208be8
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
The search for reuse phase for *all* the objects scans *all*
the packfiles, looking for the best candidate to serve back to the
client.
This can lead to an expensive operation when the number of
packfiles and objects is high.
Add parameter "pack.searchForReuseTimeout" to limit the time spent
on this search.
Change-Id: I54f5cddb6796fdc93ad9585c2ab4b44854fa6c48
When reading loose objects over NFS it is possible that the OS syscall
would fail with ESTALE errors: This happens when the open file
descriptor no longer refers to a valid file.
Notoriously it is possible to hit this scenario when git data is shared
among multiple clients, for example by multiple gerrit instances in HA.
If one of the two clients performs a GC operation that would cause the
packing and then the pruning of loose objects, the other client might
still hold a reference to those objects, which would cause an exception
to bubble up the stack.
The Linux NFS FAQ[1] (at point A.10), suggests that the proper way to
handle such ESTALE scenarios is to:
"[...] close the file or directory where the error occurred, and reopen
it so the NFS client can resolve the pathname again and retrieve the new
file handle."
In case of a stale file handle exception, we now attempt to read the
loose object again (up to 5 times), until we either succeed or encounter
a FileNotFoundException, in which case the search can continue to
Packfiles and alternates.
The limit of 5 provides an arbitrary upper bounds that is consistent to
the one chosen when handling stale file handles for packed-refs
files (see [2] for context).
[1] http://nfs.sourceforge.net/
[2] https://git.eclipse.org/r/c/jgit/jgit/+/54350
Bug: 573791
Change-Id: I9950002f772bbd8afeb9c6108391923be9d0ef51
The loosen() method has opened pack file and the open pack file handle
may prevent it from being deleted e.g. on Windows. Fix this by closing
the pack file only after loosen() finished.
Bug: 574178
Change-Id: Icd59931a218d84c9c97b450eea87b21ed01248ff
Signed-off-by: andrew.xian2000@gmail.com
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The loosen() method has opened pack file and the open pack file handle
may prevent it from being deleted e.g. on Windows. Fix this by closing
the pack file only after loosen() finished.
Bug: 574178
Change-Id: Icd59931a218d84c9c97b450eea87b21ed01248ff
Signed-off-by: andrew.xian2000@gmail.com
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On a subtree, a PathSuffixFilter must return -1 ("indeterminate"),
not 0 ("include"), otherwise negation goes wrong: an indeterminate
result (-1) is passed on, but a decision (0/1) is inverted.
As a result a negated PathSuffixFilter would skip all folders.
Bug: 574253
Change-Id: I27fe785c0d772392a5b5efe0a7b1c9cafcb6e566
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
That commit was submitted on master between the 5.12.0 release and
the 5.13.0 version bump.
Change-Id: I679e818bfc5a4695b66548add9a83a22c89a4ffc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
From Git commit 9c1e657a8f:
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at
least one application wherein this is useful - push negotiation.
Therefore, make it possible for this negotiation step to be done
independently.
This feature is for protocol v2 only.
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for
the client to say "done". In practice, the client will never say it;
instead it will cease requests once it is satisfied.
Advertising the server capability option "wait-for-done" is behind the
transport config: uploadpack.advertisewaitfordone, which by default is
false.
Change-Id: I5ebd3e99ad76b8943597216e23ced2ed38eb5224
HostEntry class was public with empty constructor, so adding
constructors with default visibility actually reduced visibility of
constructor.
Change-Id: I4c996c0559102084946ba49a71afe10dda5e0f95
This is similar to change Idbc2c29bd that skipped detecting content
renames for large files. With this change, we added a new option in
RenameDetector called "skipContentRenamesForBinaryFiles", that when set,
causes binary files with any slight modification to be identified as
added/deleted. The default for this boolean is false, so preserving
current behaviour.
Change-Id: I4770b1f69c60b1037025ddd0940ba86df6047299
When the target repository is receiving commits from other sources,
the repo command commit can fail with a LOCK_FAILURE. We could let
callers retry, but then the command needs to redo all the work (opening
all subrepos to recreate the tree).
Retry the commit in LOCK_FAILURE inside the command. The commit
rewrites the whole tree, so it shouldn't have merge errors. Use an
exponential delay with jitter for the retries.
Change-Id: I517b6f2afd16a4b695e6cf471b5d6cf492024ec4
Signed-off-by: Ivan Frade <ifrade@google.com>
The "branch" field in the .gitmodules is the signal for gerrit to keep
the superproject autoupdated. Tags are immutable and there is no need to
track them, plus the cgit client requires the field to be a "remote
branch name" but not a tag.
Do not set the "branch" field if the revision is a tag. Keep those tags
in another field ("ref") as they help other tools to find the commit in
the destination repository.
We can still have false negatives when a refname is not fully qualified,
but this check covers e.g. the most common case in android.
Note that the javadoc of #setRecordRemoteBranch already mentions that
"submodules that request a tag will not have branch name recorded".
Change-Id: Ib1c321a4d3b7f8d51ca2ea204f72dc0cfed50c37
Signed-off-by: Ivan Frade <ifrade@google.com>
Check the last line of the last hunk of a file, not the last line of
the whole patch.
Note that C git only checks that this line starts with "\ " and is at
least 12 characters long because of possible different texts when non-
English messages are used.
Change-Id: I0db81699eb3e99ed7b536a3e2b8dc97df1f58a89
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
C git treats completely empty lines as empty context lines (which
traditionally have a single blank). Apparently newer GNU diff may
produce such lines; see [1]. ("Newer" meaning "since 2006"...)
[1] https://github.com/git/git/commit/b507b465f7831
Change-Id: I80c1f030edb17a46289b1dabf11a2648d2660d38
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Instead of converting the patch bytes to strings apply the patch on
byte level, like C git does. Converting the input lines and the hunk
lines from bytes to strings and then applying the patch based on
strings may give surprising results if a patch converts a text file
from one encoding to another. Moreover, in the end we don't know which
encoding to use to write the result.
Previous code just wrote the result as UTF-8, which forcibly changed
the encoding if the original input had some other encoding (even if the
patch had the same non-UTF-8 encoding). It was also wrong if the input
was UTF-8, and the patch should have changed the encoding to something
else.
So use ByteBuffers instead of Strings. This has the additional advantage
that all these ByteBuffers can share the underlying byte arrays of the
input and of the patch, so it also reduces memory consumption.
Change-Id: I450975f2ba0e7d0bec8973e3113cc2e7aea187ee
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Implement applying binary patches. Handles both literal and delta
patches. Note that C git also runs binary files through the clean
and smudge filters. Implement the same safeguards against corrupted
patches as in C git: require the full OIDs to be present in the patch
file, and apply a binary patch only if both pre- and post-image hashes
match.
Add tests for applying literal and delta patches.
Bug: 371725
Change-Id: I71dc214fe4145d7cc8e4769384fb78c7d0d6c220
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a new BinaryDeltaInputStream that applies a delta provided by
another InputStream to a given base. Because delta application needs
random access to the base, the base itself cannot be yet another
InputStream. But at least this enables streaming of the result.
Add a simple test using delta hunks generated by C git.
Bug: 371725
Change-Id: Ibd26fa2f49860737ad5c5387f7f4870d3e85e628
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add streams that can encode or decode git binary patch data on the fly.
Git writes binary patches base-85 encoded, at most 52 un-encoded bytes,
with the unencoded data length prefixed in a one-character encoding, and
suffixed with a newline character.
Add a test for both the new input and the output stream. The test
roundtrips binary data of different lengths in different ways.
Bug: 371725
Change-Id: Ic3faebaa4637520f5448b3d1acd78d5aaab3907a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add an implementation for base-85 encoding and decoding [1]. Git binary
patches use this format.
Base-85 encoding assembles bytes as 32-bit MSB values, then converts
these values to base-85 numbers (always 5 bytes) encoded as printable
ASCII characters. Decoding base-85 is the reverse operation. Note
that decoding may overflow on invalid input as 85^5 > 2^32. Encodings
always have a length that is a multiple of 5. If input length is not
divisible by 4, padding bytes are (logically) added, which are ignored
when decoding. The encoding for n bytes has thus always exactly length
(n + 3) / 4 * 5 in integer arithmetic (truncating division).
Includes tests.
[1] https://datatracker.ietf.org/doc/html/rfc1924
Bug: 371725
Change-Id: Ib5b9a503cd62cf70e080a4fb38c8cd1eeeaebcfe
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Rather than getting all ref names and prefixes and saving them
in memory to perform the check for conflicting names, rely on
RefDirectory.isNameConflicting as it is no longer an expensive
call after it was optimized in Ie994fc.
The old optimization to save ref names and prefixes in memory
was targeted towards making clones faster. With this change,
the clone performance is unaffected when tests were done with
repos containing many(~500k) refs.
Here are few recorded elapsed times for creating 10 branches
using BatchRefUpdate on NFS based repositories with varying
loose refs count. As seen here, this change helps improve the
BatchRefUpdate performance from O(n^2) to O(1).
loose_refs_count with_change without_change
50 241 ms 310 ms
300 263 ms 1502 ms
1k 181 ms 4241 ms
2k 204 ms 6440 ms
9k 158 ms 25930 ms
20k 154 ms 60443 ms
50k 171 ms 135199 ms
110k 157 ms 329450 ms
160k 209 ms 396328 ms
This update improves the Gerrit notedb migration performance
as it uses BatchRefUpdate to write change meta refs similar to
the test performed above.
Change-Id: I853ac6c7feb4b39c3156c01876b38cbd182accfe
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Avoid having to scan over ALL loose refs to determine if the
name is nested within or is a container of an existing reference.
This can get really expensive if there are too many loose refs.
Instead use exactRef and getRefsByPrefix which scan based on a
prefix.
With a simple shell script(like below) using jgit client to create
1k refs in a new repository on NFS, this change brings down the time
from 12mins to 7mins.
for ref in $(seq 1 1000); do
jgit branch "$ref"
done
Here are few recorded elapsed times to create a new branch on NFS
based repositories with varying loose refs count. As we see here,
this change improves the name conflicting check from O(n^2) to O(1).
loose_refs_count with_change without_change
50 44 ms 164 ms
300 45 ms 1193 ms
1k 38 ms 2610 ms
2k 44 ms 6003 ms
9k 46 ms 27860 ms
20k 45 ms 48591 ms
50k 51 ms 135471 ms
110k 43 ms 294252 ms
160k 52 ms 430976 ms
Change-Id: Ie994fc184b8f82811bfb37b111eb9733dbe3e6e0
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Applying a patch on Windows failed if the patch had the (normal)
single-LF line endings, but the file on disk had the usual Windows
CR-LF line endings.
Git (and JGit) compute diffs on the git-internal blob, i.e., after
CR-LF transformation and clean filtering. Applying patches to files
directly is thus incorrect and may fail if CR-LF settings don't
match, or if clean/smudge filtering is involved.
Change ApplyCommand to run the file content through the check-in
filters before applying the patch, and run the result through the
check-out filters. This makes patch application succeed even if the
patch has single-LFs, but the file has CR-LF and core.autocrlf is
true.
Add tests for various combinations of line endings in the file and in
the patch, and a test to verify the clean/smudge handling.
See also [1].
Running the file though clean/smudge may give strange results with
LFS-managed files. JGit's DiffFormatter has some extra code and
applies the smudge filter again after having run the file through
the check-in filters (CR-LF and clean). So JGit can actually produce
a diff on LFS-managed files using the normal diff machinery. (If it
doesn't run out of memory, that is. After all, LFS is intended for
_large_ files.) How such a diff would be applied with either C git
or JGit is entirely unclear; neither has any code for this special
case. Compare also [2].
Note that C git just doesn't know about LFS and always diffs after
the check-in filter chain, so for LFS files, it'll produce a diff
of the LFS pointers.
[1] https://github.com/git/git/commit/c24f3abac
[2] https://github.com/git-lfs/git-lfs/issues/440
Bug: 571585
Change-Id: I8f71ff26313b5773ff1da612b0938ad2f18751f5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Use Character.isWhitespace() instead of Character.isSpaceChar() to
treat TABs as whitespace, too.
Change-Id: Iffc59c13357d981ede6a1e0feb6ea6ff03fb3064
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Negated patterns were handled wrongly. According to the OpenBSD
ssh_config man page,[1] a negated pattern never matches. Negated
patterns make only sense if there are positive patterns; the
negated pattern then can define exceptions for the positive
patterns.
OpenSshConfigFile did this wrongly. It handled "!foo" as "matching
everything but foo", but actually the semantics is "if the input is
"foo", this entry doesn't apply. If the input is anything else,
other patterns determine whether the entry may apply.".
[1] https://man.openbsd.org/ssh_config
Change-Id: I50f6e46581b7ece4c949eddf62f4a265573ec29e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* master: (34 commits)
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
LockFile: create OutputStream only when needed
Add a cgit interoperability test for LockFile
Add TemporaryBuffer.toString(int limit)
LockFile: create OutputStream only when needed
Prepare 5.12.0-SNAPSHOT builds
JGit v5.12.0.202105051250-m2
Update jetty to 9.4.40.v20210413
[releng] Update eclipse-jarsigner-plugin to 1.3.1
Implement ours/theirs content conflict resolution
ssh: ensure list is modifiable before using Iterator.remove().
Update orbit to S20210406213021 and add 4.20-staging target
Fix typo in test method name
Allow file mode conflicts in virtual base commit on recursive merge.
sshd: don't lock the known_hosts files on reading
Allow info messages in UsernamePasswordCredentialsProvider
ssh config: do environment variable replacement
sshd: implement server-sig-algs SSH extension (client side)
Upgrade ecj to 3.25.0
...
Change-Id: Ibc39a9c4e431d15b67ab4a307241f47a7f3740a9