*** empty log message ***

INSTALL

@@ -1,3 +1,9 @@
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
 Basic Installation
 ==================
 
@@ -8,20 +14,27 @@ various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
 It may also create one or more `.h' files containing system-dependent
 definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
+you can run in the future to recreate the current configuration, and a
-`config.cache' that saves the results of its tests to speed up
+file `config.log' containing compiler output (useful mainly for
-reconfiguring, and a file `config.log' containing compiler output
+debugging `configure').
-(useful mainly for debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
 diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
+be considered for the next release.  If you are using the cache, and at
-contains results you don't want to keep, you may remove or edit it.
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
 
-   The file `configure.in' is used to create `configure' by a program
+   The file `configure.ac' (or `configure.in') is used to create
-called `autoconf'.  You only need `configure.in' if you want to change
+`configure' by a program called `autoconf'.  You only need
-it or regenerate `configure' using a newer version of `autoconf'.
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
 
 The simplest way to compile this package is:
 
@@ -55,14 +68,16 @@ Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
+the `configure' script does not know about.  Run `./configure --help'
-initial values for variables by setting them in the environment.  Using
+for details on some of the pertinent environment variables.
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
 
-Or on systems that have the `env' program, you can do it like this:
+   You can give `configure' initial values for configuration parameters
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
@@ -75,11 +90,11 @@ directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not supports the `VPATH'
+   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a time
+variable, you have to compile the package for one architecture at a
-in the source code directory.  After you have installed the package for
+time in the source code directory.  After you have installed the
-one architecture, use `make distclean' before reconfiguring for another
+package for one architecture, use `make distclean' before reconfiguring
-architecture.
+for another architecture.
 
 Installation Names
 ==================
@@ -123,21 +138,31 @@ Specifying the System Type
 ==========================
 
    There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of host the package
+automatically, but needs to determine by the type of machine the package
-will run on.  Usually `configure' can figure that out, but if it prints
+will run on.  Usually, assuming the package is built to be run on the
-a message saying it can not guess the host type, give it the
+_same_ architectures, `configure' can figure that out, but if it prints
-`--host=TYPE' option.  TYPE can either be a short name for the system
+a message saying it cannot guess the machine type, give it the
-type, such as `sun4', or a canonical name with three fields:
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
      CPU-COMPANY-SYSTEM
 
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
    See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
 
-   If you are building compiler tools for cross-compiling, you can also
+   If you are _building_ compiler tools for cross-compiling, you should
 use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
+produce code for.
-system on which you are compiling the package.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
 
 Sharing Defaults
 ================
@@ -150,20 +175,44 @@ default values for variables like `CC', `cache_file', and `prefix'.
 `CONFIG_SITE' environment variable to the location of the site script.
 A warning: not all `configure' scripts look for a site script.
 
-Operation Controls
+Defining Variables
 ==================
 
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
    `configure' recognizes the following options to control how it
 operates.
 
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
 `--help'
+`-h'
      Print a summary of the options to `configure', and exit.
 
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
 `--quiet'
 `--silent'
 `-q'
@@ -175,8 +224,6 @@ operates.
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
-`--version'
+`configure' also accepts some other, not widely useful, options.  Run
-     Print the version of Autoconf used to generate the `configure'
+`configure --help' for more details.
-     script, and exit.
 
-`configure' also accepts some other, not widely useful, options.

examples/.deps/file_adapter_ex2.Po

@@ -1,7 +1,7 @@
-file_adapter_ex2.o: file_adapter_ex2.c ../src/cmph.h \
+file_adapter_ex2.o file_adapter_ex2.o: file_adapter_ex2.c ../src/cmph.h \
   /usr/include/stdlib.h /usr/include/features.h /usr/include/sys/cdefs.h \
   /usr/include/gnu/stubs.h \
-  /usr/lib/gcc-lib/i486-linux/3.3.5/include/stddef.h \
+  /usr/lib/gcc-lib/i586-suse-linux/3.3.4/include/stddef.h \
   /usr/include/sys/types.h /usr/include/bits/types.h \
   /usr/include/bits/wordsize.h /usr/include/bits/typesizes.h \
   /usr/include/time.h /usr/include/endian.h /usr/include/bits/endian.h \
@@ -11,7 +11,7 @@ file_adapter_ex2.o: file_adapter_ex2.c ../src/cmph.h \
   /usr/include/bits/sched.h /usr/include/alloca.h /usr/include/stdio.h \
   /usr/include/libio.h /usr/include/_G_config.h /usr/include/wchar.h \
   /usr/include/bits/wchar.h /usr/include/gconv.h \
-  /usr/lib/gcc-lib/i486-linux/3.3.5/include/stdarg.h \
+  /usr/lib/gcc-lib/i586-suse-linux/3.3.4/include/stdarg.h \
   /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
   /usr/include/bits/stdio.h ../src/cmph_types.h
 
@@ -25,7 +25,7 @@ file_adapter_ex2.o: file_adapter_ex2.c ../src/cmph.h \
 
 /usr/include/gnu/stubs.h:
 
-/usr/lib/gcc-lib/i486-linux/3.3.5/include/stddef.h:
+/usr/lib/gcc-lib/i586-suse-linux/3.3.4/include/stddef.h:
 
 /usr/include/sys/types.h:
 
@@ -69,7 +69,7 @@ file_adapter_ex2.o: file_adapter_ex2.c ../src/cmph.h \
 
 /usr/include/gconv.h:
 
-/usr/lib/gcc-lib/i486-linux/3.3.5/include/stdarg.h:
+/usr/lib/gcc-lib/i586-suse-linux/3.3.4/include/stdarg.h:
 
 /usr/include/bits/stdio_lim.h:
 

examples/.deps/vector_adapter_ex1.Po

@@ -1,7 +1,7 @@
-vector_adapter_ex1.o: vector_adapter_ex1.c ../src/cmph.h \
+vector_adapter_ex1.o vector_adapter_ex1.o: vector_adapter_ex1.c \
-  /usr/include/stdlib.h /usr/include/features.h /usr/include/sys/cdefs.h \
+  ../src/cmph.h /usr/include/stdlib.h /usr/include/features.h \
-  /usr/include/gnu/stubs.h \
+  /usr/include/sys/cdefs.h /usr/include/gnu/stubs.h \
-  /usr/lib/gcc-lib/i486-linux/3.3.5/include/stddef.h \
+  /usr/lib/gcc-lib/i586-suse-linux/3.3.4/include/stddef.h \
   /usr/include/sys/types.h /usr/include/bits/types.h \
   /usr/include/bits/wordsize.h /usr/include/bits/typesizes.h \
   /usr/include/time.h /usr/include/endian.h /usr/include/bits/endian.h \
@@ -11,7 +11,7 @@ vector_adapter_ex1.o: vector_adapter_ex1.c ../src/cmph.h \
   /usr/include/bits/sched.h /usr/include/alloca.h /usr/include/stdio.h \
   /usr/include/libio.h /usr/include/_G_config.h /usr/include/wchar.h \
   /usr/include/bits/wchar.h /usr/include/gconv.h \
-  /usr/lib/gcc-lib/i486-linux/3.3.5/include/stdarg.h \
+  /usr/lib/gcc-lib/i586-suse-linux/3.3.4/include/stdarg.h \
   /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
   /usr/include/bits/stdio.h ../src/cmph_types.h
 
@@ -25,7 +25,7 @@ vector_adapter_ex1.o: vector_adapter_ex1.c ../src/cmph.h \
 
 /usr/include/gnu/stubs.h:
 
-/usr/lib/gcc-lib/i486-linux/3.3.5/include/stddef.h:
+/usr/lib/gcc-lib/i586-suse-linux/3.3.4/include/stddef.h:
 
 /usr/include/sys/types.h:
 
@@ -69,7 +69,7 @@ vector_adapter_ex1.o: vector_adapter_ex1.c ../src/cmph.h \
 
 /usr/include/gconv.h:
 
-/usr/lib/gcc-lib/i486-linux/3.3.5/include/stdarg.h:
+/usr/lib/gcc-lib/i586-suse-linux/3.3.4/include/stdarg.h:
 
 /usr/include/bits/stdio_lim.h:
 

src/brz.c

@@ -262,7 +262,7 @@ static int brz_gen_graphs(cmph_config_t *mph)
 	char *filename = NULL;
 	char *key = NULL;
 	cmph_uint32 keylen;
-	
+	cmph_uint32 max_size = 0;
 	cmph_uint32 cur_bucket = 0;
 	cmph_uint8 nkeys_vd = 0;
 	char ** keys_vd = NULL;
@@ -478,6 +478,7 @@ static int brz_gen_graphs(cmph_config_t *mph)
 			bmz_data_t * bmzf = NULL;
 			// Source of keys
 			//fprintf(stderr, "Generating mphf %u in %u \n",cur_bucket + 1, brz->k);
+			if(nkeys_vd > max_size) max_size = nkeys_vd;
 			source = cmph_io_vector_adapter(keys_vd, (cmph_uint32)nkeys_vd);
 			config = cmph_config_new(source);
 			cmph_config_set_algo(config, CMPH_BMZ);
@@ -499,6 +500,7 @@ static int brz_gen_graphs(cmph_config_t *mph)
 	free(keys_vd);
 	free(buffer_merge);
 	free(buffer_h3);
+	fprintf(stderr, "Maximal Size: %u\n", max_size);
 	return 1;
 #pragma pack()
 }