Fixed m4 large files macro.

This commit is contained in:
Davi Reis 2010-09-09 15:51:03 -07:00
parent 1fea1cc9a0
commit 3103d23ff4
6 changed files with 57 additions and 283 deletions

234
INSTALL
View File

@ -1,234 +0,0 @@
Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006 Free Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that the
`configure' script does not know about. Run `./configure --help' for
details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.

View File

@ -1,4 +1,3 @@
SUBDIRS = src tests examples man # cdb
SUBDIRS = src tests examples man SUBDIRS = src tests examples man
EXTRA_DIST = cmph.spec configure.ac cmph.pc.in EXTRA_DIST = cmph.spec configure.ac cmph.pc.in

View File

@ -1,3 +1,9 @@
AC_DEFUN([AC_CHECK_SPOON], [
AC_ARG_WITH(spoon, [ --with-spoon=SPOON this is inocuous, since the truth is that there is no spoon ])
AC_MSG_CHECKING(if there is spoon)
AC_MSG_RESULT(no)
])
dnl By default, many hosts won't let programs access large files; dnl By default, many hosts won't let programs access large files;
dnl one must use special compiler options to get large-file access to work. dnl one must use special compiler options to get large-file access to work.
dnl For more details about this brain damage please see: dnl For more details about this brain damage please see:
@ -7,7 +13,7 @@ dnl Written by Paul Eggert <eggert@twinsun.com>.
dnl Internal subroutine of AC_SYS_EXTRA_LARGEFILE. dnl Internal subroutine of AC_SYS_EXTRA_LARGEFILE.
dnl AC_SYS_EXTRA_LARGEFILE_FLAGS(FLAGSNAME) dnl AC_SYS_EXTRA_LARGEFILE_FLAGS(FLAGSNAME)
AC_DEFUN(AC_SYS_EXTRA_LARGEFILE_FLAGS, AC_DEFUN([AC_SYS_EXTRA_LARGEFILE_FLAGS],
[AC_CACHE_CHECK([for $1 value to request large file support], [AC_CACHE_CHECK([for $1 value to request large file support],
ac_cv_sys_largefile_$1, ac_cv_sys_largefile_$1,
[ac_cv_sys_largefile_$1=`($GETCONF LFS_$1) 2>/dev/null` || { [ac_cv_sys_largefile_$1=`($GETCONF LFS_$1) 2>/dev/null` || {
@ -30,7 +36,7 @@ changequote([, ])dnl
dnl Internal subroutine of AC_SYS_EXTRA_LARGEFILE. dnl Internal subroutine of AC_SYS_EXTRA_LARGEFILE.
dnl AC_SYS_EXTRA_LARGEFILE_SPACE_APPEND(VAR, VAL) dnl AC_SYS_EXTRA_LARGEFILE_SPACE_APPEND(VAR, VAL)
AC_DEFUN(AC_SYS_EXTRA_LARGEFILE_SPACE_APPEND, AC_DEFUN([AC_SYS_EXTRA_LARGEFILE_SPACE_APPEND],
[case $2 in [case $2 in
no) ;; no) ;;
?*) ?*)
@ -42,7 +48,7 @@ AC_DEFUN(AC_SYS_EXTRA_LARGEFILE_SPACE_APPEND,
dnl Internal subroutine of AC_SYS_EXTRA_LARGEFILE. dnl Internal subroutine of AC_SYS_EXTRA_LARGEFILE.
dnl AC_SYS_EXTRA_LARGEFILE_MACRO_VALUE(C-MACRO, CACHE-VAR, COMMENT, CODE-TO-SET-DEFAULT) dnl AC_SYS_EXTRA_LARGEFILE_MACRO_VALUE(C-MACRO, CACHE-VAR, COMMENT, CODE-TO-SET-DEFAULT)
AC_DEFUN(AC_SYS_EXTRA_LARGEFILE_MACRO_VALUE, AC_DEFUN([AC_SYS_EXTRA_LARGEFILE_MACRO_VALUE],
[AC_CACHE_CHECK([for $1], $2, [AC_CACHE_CHECK([for $1], $2,
[$2=no [$2=no
changequote(, )dnl changequote(, )dnl
@ -61,7 +67,7 @@ changequote([, ])dnl
AC_DEFINE_UNQUOTED([$1], [$]$2, [$3]) AC_DEFINE_UNQUOTED([$1], [$]$2, [$3])
fi]) fi])
AC_DEFUN(AC_SYS_EXTRA_LARGEFILE, AC_DEFUN([AC_SYS_EXTRA_LARGEFILE],
[AC_REQUIRE([AC_CANONICAL_HOST]) [AC_REQUIRE([AC_CANONICAL_HOST])
AC_ARG_ENABLE(largefile, AC_ARG_ENABLE(largefile,
[ --disable-largefile omit support for large files]) [ --disable-largefile omit support for large files])
@ -70,7 +76,7 @@ AC_DEFUN(AC_SYS_EXTRA_LARGEFILE,
AC_SYS_EXTRA_LARGEFILE_FLAGS(CFLAGS) AC_SYS_EXTRA_LARGEFILE_FLAGS(CFLAGS)
AC_SYS_EXTRA_LARGEFILE_FLAGS(LDFLAGS) AC_SYS_EXTRA_LARGEFILE_FLAGS(LDFLAGS)
AC_SYS_EXTRA_LARGEFILE_FLAGS(LIBS) AC_SYS_EXTRA_LARGEFILE_FLAGS(LIBS)
for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
case "$ac_flag" in case "$ac_flag" in
no) ;; no) ;;
@ -87,7 +93,7 @@ AC_DEFUN(AC_SYS_EXTRA_LARGEFILE,
AC_SYS_EXTRA_LARGEFILE_SPACE_APPEND(LIBS, "$ac_cv_sys_largefile_LIBS") AC_SYS_EXTRA_LARGEFILE_SPACE_APPEND(LIBS, "$ac_cv_sys_largefile_LIBS")
AC_SYS_EXTRA_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS, AC_SYS_EXTRA_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS,
ac_cv_sys_file_offset_bits, ac_cv_sys_file_offset_bits,
[[Number of bits in a file offset, on hosts where this is settable.]]) [Number of bits in a file offset, on hosts where this is settable.])
[case "$host_os" in [case "$host_os" in
# HP-UX 10.20 and later # HP-UX 10.20 and later
hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*) hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
@ -112,10 +118,4 @@ AC_DEFUN(AC_SYS_EXTRA_LARGEFILE,
fi fi
]) ])
AC_DEFUN([AC_CHECK_SPOON], [
AC_ARG_WITH(spoon, [ --with-spoon=SPOON this is inocuous, since the truth is that there is no spoon ])
AC_MSG_CHECKING(if there is spoon)
AC_MSG_RESULT(no)
])

View File

@ -2,6 +2,7 @@ dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.am) AC_INIT(Makefile.am)
AM_INIT_AUTOMAKE(cmph, 0.9) AM_INIT_AUTOMAKE(cmph, 0.9)
AM_CONFIG_HEADER(config.h) AM_CONFIG_HEADER(config.h)
AC_CONFIG_MACRO_DIR([m4])
dnl Checks for programs. dnl Checks for programs.
AC_PROG_AWK AC_PROG_AWK

View File

@ -32,8 +32,8 @@ POST_INSTALL = :
NORMAL_UNINSTALL = : NORMAL_UNINSTALL = :
PRE_UNINSTALL = : PRE_UNINSTALL = :
POST_UNINSTALL = : POST_UNINSTALL = :
build_triplet = i386-apple-darwin9.6.0 build_triplet = i386-apple-darwin10.4.0
host_triplet = i386-apple-darwin9.6.0 host_triplet = i386-apple-darwin10.4.0
bin_PROGRAMS = cmph$(EXEEXT) bin_PROGRAMS = cmph$(EXEEXT)
subdir = src subdir = src
DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \ DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \
@ -90,33 +90,29 @@ HEADERS = $(include_HEADERS)
ETAGS = etags ETAGS = etags
CTAGS = ctags CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /Users/davi/vc/cmph/missing --run aclocal-1.10 ACLOCAL = ${SHELL} /Users/davi/vc/cmphsf/missing --run aclocal-1.10
AMTAR = ${SHELL} /Users/davi/vc/cmph/missing --run tar AMTAR = ${SHELL} /Users/davi/vc/cmphsf/missing --run tar
AR = ar AR = ar
AUTOCONF = ${SHELL} /Users/davi/vc/cmph/missing --run autoconf AUTOCONF = ${SHELL} /Users/davi/vc/cmphsf/missing --run autoconf
AUTOHEADER = ${SHELL} /Users/davi/vc/cmph/missing --run autoheader AUTOHEADER = ${SHELL} /Users/davi/vc/cmphsf/missing --run autoheader
AUTOMAKE = ${SHELL} /Users/davi/vc/cmph/missing --run automake-1.10 AUTOMAKE = ${SHELL} /Users/davi/vc/cmphsf/missing --run automake-1.10
AWK = awk AWK = awk
CC = gcc CC = gcc
CCDEPMODE = depmode=gcc3 CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 CFLAGS = -g -O2
CPP = gcc -E CPP = gcc -E
CPPFLAGS = CPPFLAGS =
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps DEPDIR = .deps
ECHO = echo DSYMUTIL = dsymutil
DUMPBIN =
ECHO_C = ECHO_C =
ECHO_N = -n ECHO_N = -n
ECHO_T = ECHO_T =
EGREP = /usr/bin/grep -E EGREP = /usr/bin/grep -E
EXEEXT = EXEEXT =
F77 = FGREP = /usr/bin/grep -F
FFLAGS =
GETCONF = getconf GETCONF = getconf
GREP = /usr/bin/grep GREP = /usr/bin/grep
INSTALL = /usr/bin/install -c INSTALL = /usr/bin/install -c
@ -124,15 +120,22 @@ INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL} INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL} INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
LDFLAGS = LDFLAGS =
LIBM =
LIBOBJS = LIBOBJS =
LIBS = LIBS =
LIBTOOL = $(SHELL) $(top_builddir)/libtool LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = lipo
LN_S = ln -s LN_S = ln -s
LTLIBOBJS = LTLIBOBJS =
MAKEINFO = ${SHELL} /Users/davi/vc/cmph/missing --run makeinfo MAKEINFO = ${SHELL} /Users/davi/vc/cmphsf/missing --run makeinfo
MKDIR_P = .././install-sh -c -d MKDIR_P = .././install-sh -c -d
NM = /usr/bin/nm
NMEDIT = nmedit
OBJEXT = o OBJEXT = o
OTOOL = otool
OTOOL64 = :
PACKAGE = cmph PACKAGE = cmph
PACKAGE_BUGREPORT = PACKAGE_BUGREPORT =
PACKAGE_NAME = PACKAGE_NAME =
@ -141,27 +144,27 @@ PACKAGE_TARNAME =
PACKAGE_VERSION = PACKAGE_VERSION =
PATH_SEPARATOR = : PATH_SEPARATOR = :
RANLIB = ranlib RANLIB = ranlib
SED = /usr/bin/sed
SET_MAKE = SET_MAKE =
SHELL = /bin/sh SHELL = /bin/sh
STRIP = strip STRIP = strip
VERSION = 0.9 VERSION = 0.9
abs_builddir = /Users/davi/vc/cmph/src abs_builddir = /Users/davi/vc/cmphsf/src
abs_srcdir = /Users/davi/vc/cmph/src abs_srcdir = /Users/davi/vc/cmphsf/src
abs_top_builddir = /Users/davi/vc/cmph abs_top_builddir = /Users/davi/vc/cmphsf
abs_top_srcdir = /Users/davi/vc/cmph abs_top_srcdir = /Users/davi/vc/cmphsf
ac_ct_CC = gcc ac_ct_CC = gcc
ac_ct_CXX = g++ ac_ct_DUMPBIN =
ac_ct_F77 =
am__include = include am__include = include
am__leading_dot = . am__leading_dot = .
am__quote = am__quote =
am__tar = ${AMTAR} chof - "$$tardir" am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf - am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin bindir = ${exec_prefix}/bin
build = i386-apple-darwin9.6.0 build = i386-apple-darwin10.4.0
build_alias = build_alias =
build_cpu = i386 build_cpu = i386
build_os = darwin9.6.0 build_os = darwin10.4.0
build_vendor = apple build_vendor = apple
builddir = . builddir = .
datadir = ${datarootdir} datadir = ${datarootdir}
@ -169,24 +172,25 @@ datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE} docdir = ${datarootdir}/doc/${PACKAGE}
dvidir = ${docdir} dvidir = ${docdir}
exec_prefix = ${prefix} exec_prefix = ${prefix}
host = i386-apple-darwin9.6.0 host = i386-apple-darwin10.4.0
host_alias = host_alias =
host_cpu = i386 host_cpu = i386
host_os = darwin9.6.0 host_os = darwin10.4.0
host_vendor = apple host_vendor = apple
htmldir = ${docdir} htmldir = ${docdir}
includedir = ${prefix}/include includedir = ${prefix}/include
infodir = ${datarootdir}/info infodir = ${datarootdir}/info
install_sh = $(SHELL) /Users/davi/vc/cmph/install-sh install_sh = $(SHELL) /Users/davi/vc/cmphsf/install-sh
libdir = ${exec_prefix}/lib libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var localstatedir = ${prefix}/var
lt_ECHO = echo
mandir = ${datarootdir}/man mandir = ${datarootdir}/man
mkdir_p = $(top_builddir)/./install-sh -c -d mkdir_p = $(top_builddir)/./install-sh -c -d
oldincludedir = /usr/include oldincludedir = /usr/include
pdfdir = ${docdir} pdfdir = ${docdir}
prefix = /usr/local prefix = /usr
program_transform_name = s,x,x, program_transform_name = s,x,x,
psdir = ${docdir} psdir = ${docdir}
sbindir = ${exec_prefix}/sbin sbindir = ${exec_prefix}/sbin

View File

@ -102,21 +102,17 @@ CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@ CFLAGS = @CFLAGS@
CPP = @CPP@ CPP = @CPP@
CPPFLAGS = @CPPFLAGS@ CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@ CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@ DEFS = @DEFS@
DEPDIR = @DEPDIR@ DEPDIR = @DEPDIR@
ECHO = @ECHO@ DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@ ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@ ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@ ECHO_T = @ECHO_T@
EGREP = @EGREP@ EGREP = @EGREP@
EXEEXT = @EXEEXT@ EXEEXT = @EXEEXT@
F77 = @F77@ FGREP = @FGREP@
FFLAGS = @FFLAGS@
GETCONF = @GETCONF@ GETCONF = @GETCONF@
GREP = @GREP@ GREP = @GREP@
INSTALL = @INSTALL@ INSTALL = @INSTALL@
@ -124,15 +120,22 @@ INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@ LDFLAGS = @LDFLAGS@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@ LIBOBJS = @LIBOBJS@
LIBS = @LIBS@ LIBS = @LIBS@
LIBTOOL = @LIBTOOL@ LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@ LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@ LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@ MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@ MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJEXT = @OBJEXT@ OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@ PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_NAME = @PACKAGE_NAME@
@ -141,6 +144,7 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@ PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@ PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@ RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@ SET_MAKE = @SET_MAKE@
SHELL = @SHELL@ SHELL = @SHELL@
STRIP = @STRIP@ STRIP = @STRIP@
@ -150,8 +154,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@ abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@ abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@ ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_F77 = @ac_ct_F77@
am__include = @am__include@ am__include = @am__include@
am__leading_dot = @am__leading_dot@ am__leading_dot = @am__leading_dot@
am__quote = @am__quote@ am__quote = @am__quote@
@ -182,6 +185,7 @@ libdir = @libdir@
libexecdir = @libexecdir@ libexecdir = @libexecdir@
localedir = @localedir@ localedir = @localedir@
localstatedir = @localstatedir@ localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@ mandir = @mandir@
mkdir_p = @mkdir_p@ mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@ oldincludedir = @oldincludedir@