cec.h (42291B) - Raw
1 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ 2 /* 3 * cec - HDMI Consumer Electronics Control public header 4 * 5 * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. 6 */ 7 8 #ifndef _CEC_UAPI_H 9 #define _CEC_UAPI_H 10 11 #include <linux/types.h> 12 #include <linux/string.h> 13 14 #define CEC_MAX_MSG_SIZE 16 15 16 /** 17 * struct cec_msg - CEC message structure. 18 * @tx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the 19 * driver when the message transmission has finished. 20 * @rx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the 21 * driver when the message was received. 22 * @len: Length in bytes of the message. 23 * @timeout: The timeout (in ms) that is used to timeout CEC_RECEIVE. 24 * Set to 0 if you want to wait forever. This timeout can also be 25 * used with CEC_TRANSMIT as the timeout for waiting for a reply. 26 * If 0, then it will use a 1 second timeout instead of waiting 27 * forever as is done with CEC_RECEIVE. 28 * @sequence: The framework assigns a sequence number to messages that are 29 * sent. This can be used to track replies to previously sent 30 * messages. 31 * @flags: Set to 0. 32 * @msg: The message payload. 33 * @reply: This field is ignored with CEC_RECEIVE and is only used by 34 * CEC_TRANSMIT. If non-zero, then wait for a reply with this 35 * opcode. Set to CEC_MSG_FEATURE_ABORT if you want to wait for 36 * a possible ABORT reply. If there was an error when sending the 37 * msg or FeatureAbort was returned, then reply is set to 0. 38 * If reply is non-zero upon return, then len/msg are set to 39 * the received message. 40 * If reply is zero upon return and status has the 41 * CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to 42 * the received feature abort message. 43 * If reply is zero upon return and status has the 44 * CEC_TX_STATUS_MAX_RETRIES bit set, then no reply was seen at 45 * all. If reply is non-zero for CEC_TRANSMIT and the message is a 46 * broadcast, then -EINVAL is returned. 47 * if reply is non-zero, then timeout is set to 1000 (the required 48 * maximum response time). 49 * @rx_status: The message receive status bits. Set by the driver. 50 * @tx_status: The message transmit status bits. Set by the driver. 51 * @tx_arb_lost_cnt: The number of 'Arbitration Lost' events. Set by the driver. 52 * @tx_nack_cnt: The number of 'Not Acknowledged' events. Set by the driver. 53 * @tx_low_drive_cnt: The number of 'Low Drive Detected' events. Set by the 54 * driver. 55 * @tx_error_cnt: The number of 'Error' events. Set by the driver. 56 */ 57 struct cec_msg { 58 __u64 tx_ts; 59 __u64 rx_ts; 60 __u32 len; 61 __u32 timeout; 62 __u32 sequence; 63 __u32 flags; 64 __u8 msg[CEC_MAX_MSG_SIZE]; 65 __u8 reply; 66 __u8 rx_status; 67 __u8 tx_status; 68 __u8 tx_arb_lost_cnt; 69 __u8 tx_nack_cnt; 70 __u8 tx_low_drive_cnt; 71 __u8 tx_error_cnt; 72 }; 73 74 /** 75 * cec_msg_initiator - return the initiator's logical address. 76 * @msg: the message structure 77 */ 78 static __inline__ __u8 cec_msg_initiator(const struct cec_msg *msg) 79 { 80 return msg->msg[0] >> 4; 81 } 82 83 /** 84 * cec_msg_destination - return the destination's logical address. 85 * @msg: the message structure 86 */ 87 static __inline__ __u8 cec_msg_destination(const struct cec_msg *msg) 88 { 89 return msg->msg[0] & 0xf; 90 } 91 92 /** 93 * cec_msg_opcode - return the opcode of the message, -1 for poll 94 * @msg: the message structure 95 */ 96 static __inline__ int cec_msg_opcode(const struct cec_msg *msg) 97 { 98 return msg->len > 1 ? msg->msg[1] : -1; 99 } 100 101 /** 102 * cec_msg_is_broadcast - return true if this is a broadcast message. 103 * @msg: the message structure 104 */ 105 static __inline__ int cec_msg_is_broadcast(const struct cec_msg *msg) 106 { 107 return (msg->msg[0] & 0xf) == 0xf; 108 } 109 110 /** 111 * cec_msg_init - initialize the message structure. 112 * @msg: the message structure 113 * @initiator: the logical address of the initiator 114 * @destination:the logical address of the destination (0xf for broadcast) 115 * 116 * The whole structure is zeroed, the len field is set to 1 (i.e. a poll 117 * message) and the initiator and destination are filled in. 118 */ 119 static __inline__ void cec_msg_init(struct cec_msg *msg, 120 __u8 initiator, __u8 destination) 121 { 122 memset(msg, 0, sizeof(*msg)); 123 msg->msg[0] = (initiator << 4) | destination; 124 msg->len = 1; 125 } 126 127 /** 128 * cec_msg_set_reply_to - fill in destination/initiator in a reply message. 129 * @msg: the message structure for the reply 130 * @orig: the original message structure 131 * 132 * Set the msg destination to the orig initiator and the msg initiator to the 133 * orig destination. Note that msg and orig may be the same pointer, in which 134 * case the change is done in place. 135 * 136 * It also zeroes the reply, timeout and flags fields. 137 */ 138 static __inline__ void cec_msg_set_reply_to(struct cec_msg *msg, 139 struct cec_msg *orig) 140 { 141 /* The destination becomes the initiator and vice versa */ 142 msg->msg[0] = (cec_msg_destination(orig) << 4) | 143 cec_msg_initiator(orig); 144 msg->reply = 0; 145 msg->timeout = 0; 146 msg->flags = 0; 147 } 148 149 /** 150 * cec_msg_recv_is_tx_result - return true if this message contains the 151 * result of an earlier non-blocking transmit 152 * @msg: the message structure from CEC_RECEIVE 153 */ 154 static __inline__ int cec_msg_recv_is_tx_result(const struct cec_msg *msg) 155 { 156 return msg->sequence && msg->tx_status && !msg->rx_status; 157 } 158 159 /** 160 * cec_msg_recv_is_rx_result - return true if this message contains the 161 * reply of an earlier non-blocking transmit 162 * @msg: the message structure from CEC_RECEIVE 163 */ 164 static __inline__ int cec_msg_recv_is_rx_result(const struct cec_msg *msg) 165 { 166 return msg->sequence && !msg->tx_status && msg->rx_status; 167 } 168 169 /* cec_msg flags field */ 170 #define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0) 171 #define CEC_MSG_FL_RAW (1 << 1) 172 #define CEC_MSG_FL_REPLY_VENDOR_ID (1 << 2) 173 174 /* cec_msg tx/rx_status field */ 175 #define CEC_TX_STATUS_OK (1 << 0) 176 #define CEC_TX_STATUS_ARB_LOST (1 << 1) 177 #define CEC_TX_STATUS_NACK (1 << 2) 178 #define CEC_TX_STATUS_LOW_DRIVE (1 << 3) 179 #define CEC_TX_STATUS_ERROR (1 << 4) 180 #define CEC_TX_STATUS_MAX_RETRIES (1 << 5) 181 #define CEC_TX_STATUS_ABORTED (1 << 6) 182 #define CEC_TX_STATUS_TIMEOUT (1 << 7) 183 184 #define CEC_RX_STATUS_OK (1 << 0) 185 #define CEC_RX_STATUS_TIMEOUT (1 << 1) 186 #define CEC_RX_STATUS_FEATURE_ABORT (1 << 2) 187 #define CEC_RX_STATUS_ABORTED (1 << 3) 188 189 static __inline__ int cec_msg_status_is_ok(const struct cec_msg *msg) 190 { 191 if (msg->tx_status && !(msg->tx_status & CEC_TX_STATUS_OK)) 192 return 0; 193 if (msg->rx_status && !(msg->rx_status & CEC_RX_STATUS_OK)) 194 return 0; 195 if (!msg->tx_status && !msg->rx_status) 196 return 0; 197 return !(msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT); 198 } 199 200 #define CEC_LOG_ADDR_INVALID 0xff 201 #define CEC_PHYS_ADDR_INVALID 0xffff 202 203 /* 204 * The maximum number of logical addresses one device can be assigned to. 205 * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The 206 * Analog Devices CEC hardware supports 3. So let's go wild and go for 4. 207 */ 208 #define CEC_MAX_LOG_ADDRS 4 209 210 /* The logical addresses defined by CEC 2.0 */ 211 #define CEC_LOG_ADDR_TV 0 212 #define CEC_LOG_ADDR_RECORD_1 1 213 #define CEC_LOG_ADDR_RECORD_2 2 214 #define CEC_LOG_ADDR_TUNER_1 3 215 #define CEC_LOG_ADDR_PLAYBACK_1 4 216 #define CEC_LOG_ADDR_AUDIOSYSTEM 5 217 #define CEC_LOG_ADDR_TUNER_2 6 218 #define CEC_LOG_ADDR_TUNER_3 7 219 #define CEC_LOG_ADDR_PLAYBACK_2 8 220 #define CEC_LOG_ADDR_RECORD_3 9 221 #define CEC_LOG_ADDR_TUNER_4 10 222 #define CEC_LOG_ADDR_PLAYBACK_3 11 223 #define CEC_LOG_ADDR_BACKUP_1 12 224 #define CEC_LOG_ADDR_BACKUP_2 13 225 #define CEC_LOG_ADDR_SPECIFIC 14 226 #define CEC_LOG_ADDR_UNREGISTERED 15 /* as initiator address */ 227 #define CEC_LOG_ADDR_BROADCAST 15 /* as destination address */ 228 229 /* The logical address types that the CEC device wants to claim */ 230 #define CEC_LOG_ADDR_TYPE_TV 0 231 #define CEC_LOG_ADDR_TYPE_RECORD 1 232 #define CEC_LOG_ADDR_TYPE_TUNER 2 233 #define CEC_LOG_ADDR_TYPE_PLAYBACK 3 234 #define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4 235 #define CEC_LOG_ADDR_TYPE_SPECIFIC 5 236 #define CEC_LOG_ADDR_TYPE_UNREGISTERED 6 237 /* 238 * Switches should use UNREGISTERED. 239 * Processors should use SPECIFIC. 240 */ 241 242 #define CEC_LOG_ADDR_MASK_TV (1 << CEC_LOG_ADDR_TV) 243 #define CEC_LOG_ADDR_MASK_RECORD ((1 << CEC_LOG_ADDR_RECORD_1) | \ 244 (1 << CEC_LOG_ADDR_RECORD_2) | \ 245 (1 << CEC_LOG_ADDR_RECORD_3)) 246 #define CEC_LOG_ADDR_MASK_TUNER ((1 << CEC_LOG_ADDR_TUNER_1) | \ 247 (1 << CEC_LOG_ADDR_TUNER_2) | \ 248 (1 << CEC_LOG_ADDR_TUNER_3) | \ 249 (1 << CEC_LOG_ADDR_TUNER_4)) 250 #define CEC_LOG_ADDR_MASK_PLAYBACK ((1 << CEC_LOG_ADDR_PLAYBACK_1) | \ 251 (1 << CEC_LOG_ADDR_PLAYBACK_2) | \ 252 (1 << CEC_LOG_ADDR_PLAYBACK_3)) 253 #define CEC_LOG_ADDR_MASK_AUDIOSYSTEM (1 << CEC_LOG_ADDR_AUDIOSYSTEM) 254 #define CEC_LOG_ADDR_MASK_BACKUP ((1 << CEC_LOG_ADDR_BACKUP_1) | \ 255 (1 << CEC_LOG_ADDR_BACKUP_2)) 256 #define CEC_LOG_ADDR_MASK_SPECIFIC (1 << CEC_LOG_ADDR_SPECIFIC) 257 #define CEC_LOG_ADDR_MASK_UNREGISTERED (1 << CEC_LOG_ADDR_UNREGISTERED) 258 259 static __inline__ int cec_has_tv(__u16 log_addr_mask) 260 { 261 return log_addr_mask & CEC_LOG_ADDR_MASK_TV; 262 } 263 264 static __inline__ int cec_has_record(__u16 log_addr_mask) 265 { 266 return log_addr_mask & CEC_LOG_ADDR_MASK_RECORD; 267 } 268 269 static __inline__ int cec_has_tuner(__u16 log_addr_mask) 270 { 271 return log_addr_mask & CEC_LOG_ADDR_MASK_TUNER; 272 } 273 274 static __inline__ int cec_has_playback(__u16 log_addr_mask) 275 { 276 return log_addr_mask & CEC_LOG_ADDR_MASK_PLAYBACK; 277 } 278 279 static __inline__ int cec_has_audiosystem(__u16 log_addr_mask) 280 { 281 return log_addr_mask & CEC_LOG_ADDR_MASK_AUDIOSYSTEM; 282 } 283 284 static __inline__ int cec_has_backup(__u16 log_addr_mask) 285 { 286 return log_addr_mask & CEC_LOG_ADDR_MASK_BACKUP; 287 } 288 289 static __inline__ int cec_has_specific(__u16 log_addr_mask) 290 { 291 return log_addr_mask & CEC_LOG_ADDR_MASK_SPECIFIC; 292 } 293 294 static __inline__ int cec_is_unregistered(__u16 log_addr_mask) 295 { 296 return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED; 297 } 298 299 static __inline__ int cec_is_unconfigured(__u16 log_addr_mask) 300 { 301 return log_addr_mask == 0; 302 } 303 304 /* 305 * Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID 306 * should be disabled (CEC_S_VENDOR_ID) 307 */ 308 #define CEC_VENDOR_ID_NONE 0xffffffff 309 310 /* The message handling modes */ 311 /* Modes for initiator */ 312 #define CEC_MODE_NO_INITIATOR (0x0 << 0) 313 #define CEC_MODE_INITIATOR (0x1 << 0) 314 #define CEC_MODE_EXCL_INITIATOR (0x2 << 0) 315 #define CEC_MODE_INITIATOR_MSK 0x0f 316 317 /* Modes for follower */ 318 #define CEC_MODE_NO_FOLLOWER (0x0 << 4) 319 #define CEC_MODE_FOLLOWER (0x1 << 4) 320 #define CEC_MODE_EXCL_FOLLOWER (0x2 << 4) 321 #define CEC_MODE_EXCL_FOLLOWER_PASSTHRU (0x3 << 4) 322 #define CEC_MODE_MONITOR_PIN (0xd << 4) 323 #define CEC_MODE_MONITOR (0xe << 4) 324 #define CEC_MODE_MONITOR_ALL (0xf << 4) 325 #define CEC_MODE_FOLLOWER_MSK 0xf0 326 327 /* Userspace has to configure the physical address */ 328 #define CEC_CAP_PHYS_ADDR (1 << 0) 329 /* Userspace has to configure the logical addresses */ 330 #define CEC_CAP_LOG_ADDRS (1 << 1) 331 /* Userspace can transmit messages (and thus become follower as well) */ 332 #define CEC_CAP_TRANSMIT (1 << 2) 333 /* 334 * Passthrough all messages instead of processing them. 335 */ 336 #define CEC_CAP_PASSTHROUGH (1 << 3) 337 /* Supports remote control */ 338 #define CEC_CAP_RC (1 << 4) 339 /* Hardware can monitor all messages, not just directed and broadcast. */ 340 #define CEC_CAP_MONITOR_ALL (1 << 5) 341 /* Hardware can use CEC only if the HDMI HPD pin is high. */ 342 #define CEC_CAP_NEEDS_HPD (1 << 6) 343 /* Hardware can monitor CEC pin transitions */ 344 #define CEC_CAP_MONITOR_PIN (1 << 7) 345 /* CEC_ADAP_G_CONNECTOR_INFO is available */ 346 #define CEC_CAP_CONNECTOR_INFO (1 << 8) 347 /* CEC_MSG_FL_REPLY_VENDOR_ID is available */ 348 #define CEC_CAP_REPLY_VENDOR_ID (1 << 9) 349 350 /** 351 * struct cec_caps - CEC capabilities structure. 352 * @driver: name of the CEC device driver. 353 * @name: name of the CEC device. @driver + @name must be unique. 354 * @available_log_addrs: number of available logical addresses. 355 * @capabilities: capabilities of the CEC adapter. 356 * @version: version of the CEC adapter framework. 357 */ 358 struct cec_caps { 359 char driver[32]; 360 char name[32]; 361 __u32 available_log_addrs; 362 __u32 capabilities; 363 __u32 version; 364 }; 365 366 /** 367 * struct cec_log_addrs - CEC logical addresses structure. 368 * @log_addr: the claimed logical addresses. Set by the driver. 369 * @log_addr_mask: current logical address mask. Set by the driver. 370 * @cec_version: the CEC version that the adapter should implement. Set by the 371 * caller. 372 * @num_log_addrs: how many logical addresses should be claimed. Set by the 373 * caller. 374 * @vendor_id: the vendor ID of the device. Set by the caller. 375 * @flags: flags. 376 * @osd_name: the OSD name of the device. Set by the caller. 377 * @primary_device_type: the primary device type for each logical address. 378 * Set by the caller. 379 * @log_addr_type: the logical address types. Set by the caller. 380 * @all_device_types: CEC 2.0: all device types represented by the logical 381 * address. Set by the caller. 382 * @features: CEC 2.0: The logical address features. Set by the caller. 383 */ 384 struct cec_log_addrs { 385 __u8 log_addr[CEC_MAX_LOG_ADDRS]; 386 __u16 log_addr_mask; 387 __u8 cec_version; 388 __u8 num_log_addrs; 389 __u32 vendor_id; 390 __u32 flags; 391 char osd_name[15]; 392 __u8 primary_device_type[CEC_MAX_LOG_ADDRS]; 393 __u8 log_addr_type[CEC_MAX_LOG_ADDRS]; 394 395 /* CEC 2.0 */ 396 __u8 all_device_types[CEC_MAX_LOG_ADDRS]; 397 __u8 features[CEC_MAX_LOG_ADDRS][12]; 398 }; 399 400 /* Allow a fallback to unregistered */ 401 #define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0) 402 /* Passthrough RC messages to the input subsystem */ 403 #define CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU (1 << 1) 404 /* CDC-Only device: supports only CDC messages */ 405 #define CEC_LOG_ADDRS_FL_CDC_ONLY (1 << 2) 406 407 /** 408 * struct cec_drm_connector_info - tells which drm connector is 409 * associated with the CEC adapter. 410 * @card_no: drm card number 411 * @connector_id: drm connector ID 412 */ 413 struct cec_drm_connector_info { 414 __u32 card_no; 415 __u32 connector_id; 416 }; 417 418 #define CEC_CONNECTOR_TYPE_NO_CONNECTOR 0 419 #define CEC_CONNECTOR_TYPE_DRM 1 420 421 /** 422 * struct cec_connector_info - tells if and which connector is 423 * associated with the CEC adapter. 424 * @type: connector type (if any) 425 * @drm: drm connector info 426 * @raw: array to pad the union 427 */ 428 struct cec_connector_info { 429 __u32 type; 430 union { 431 struct cec_drm_connector_info drm; 432 __u32 raw[16]; 433 }; 434 }; 435 436 /* Events */ 437 438 /* Event that occurs when the adapter state changes */ 439 #define CEC_EVENT_STATE_CHANGE 1 440 /* 441 * This event is sent when messages are lost because the application 442 * didn't empty the message queue in time 443 */ 444 #define CEC_EVENT_LOST_MSGS 2 445 #define CEC_EVENT_PIN_CEC_LOW 3 446 #define CEC_EVENT_PIN_CEC_HIGH 4 447 #define CEC_EVENT_PIN_HPD_LOW 5 448 #define CEC_EVENT_PIN_HPD_HIGH 6 449 #define CEC_EVENT_PIN_5V_LOW 7 450 #define CEC_EVENT_PIN_5V_HIGH 8 451 452 #define CEC_EVENT_FL_INITIAL_STATE (1 << 0) 453 #define CEC_EVENT_FL_DROPPED_EVENTS (1 << 1) 454 455 /** 456 * struct cec_event_state_change - used when the CEC adapter changes state. 457 * @phys_addr: the current physical address 458 * @log_addr_mask: the current logical address mask 459 * @have_conn_info: if non-zero, then HDMI connector information is available. 460 * This field is only valid if CEC_CAP_CONNECTOR_INFO is set. If that 461 * capability is set and @have_conn_info is zero, then that indicates 462 * that the HDMI connector device is not instantiated, either because 463 * the HDMI driver is still configuring the device or because the HDMI 464 * device was unbound. 465 */ 466 struct cec_event_state_change { 467 __u16 phys_addr; 468 __u16 log_addr_mask; 469 __u16 have_conn_info; 470 }; 471 472 /** 473 * struct cec_event_lost_msgs - tells you how many messages were lost. 474 * @lost_msgs: how many messages were lost. 475 */ 476 struct cec_event_lost_msgs { 477 __u32 lost_msgs; 478 }; 479 480 /** 481 * struct cec_event - CEC event structure 482 * @ts: the timestamp of when the event was sent. 483 * @event: the event. 484 * @flags: event flags. 485 * @state_change: the event payload for CEC_EVENT_STATE_CHANGE. 486 * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS. 487 * @raw: array to pad the union. 488 */ 489 struct cec_event { 490 __u64 ts; 491 __u32 event; 492 __u32 flags; 493 union { 494 struct cec_event_state_change state_change; 495 struct cec_event_lost_msgs lost_msgs; 496 __u32 raw[16]; 497 }; 498 }; 499 500 /* ioctls */ 501 502 /* Adapter capabilities */ 503 #define CEC_ADAP_G_CAPS _IOWR('a', 0, struct cec_caps) 504 505 /* 506 * phys_addr is either 0 (if this is the CEC root device) 507 * or a valid physical address obtained from the sink's EDID 508 * as read by this CEC device (if this is a source device) 509 * or a physical address obtained and modified from a sink 510 * EDID and used for a sink CEC device. 511 * If nothing is connected, then phys_addr is 0xffff. 512 * See HDMI 1.4b, section 8.7 (Physical Address). 513 * 514 * The CEC_ADAP_S_PHYS_ADDR ioctl may not be available if that is handled 515 * internally. 516 */ 517 #define CEC_ADAP_G_PHYS_ADDR _IOR('a', 1, __u16) 518 #define CEC_ADAP_S_PHYS_ADDR _IOW('a', 2, __u16) 519 520 /* 521 * Configure the CEC adapter. It sets the device type and which 522 * logical types it will try to claim. It will return which 523 * logical addresses it could actually claim. 524 * An error is returned if the adapter is disabled or if there 525 * is no physical address assigned. 526 */ 527 528 #define CEC_ADAP_G_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs) 529 #define CEC_ADAP_S_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs) 530 531 /* Transmit/receive a CEC command */ 532 #define CEC_TRANSMIT _IOWR('a', 5, struct cec_msg) 533 #define CEC_RECEIVE _IOWR('a', 6, struct cec_msg) 534 535 /* Dequeue CEC events */ 536 #define CEC_DQEVENT _IOWR('a', 7, struct cec_event) 537 538 /* 539 * Get and set the message handling mode for this filehandle. 540 */ 541 #define CEC_G_MODE _IOR('a', 8, __u32) 542 #define CEC_S_MODE _IOW('a', 9, __u32) 543 544 /* Get the connector info */ 545 #define CEC_ADAP_G_CONNECTOR_INFO _IOR('a', 10, struct cec_connector_info) 546 547 /* 548 * The remainder of this header defines all CEC messages and operands. 549 * The format matters since it the cec-ctl utility parses it to generate 550 * code for implementing all these messages. 551 * 552 * Comments ending with 'Feature' group messages for each feature. 553 * If messages are part of multiple features, then the "Has also" 554 * comment is used to list the previously defined messages that are 555 * supported by the feature. 556 * 557 * Before operands are defined a comment is added that gives the 558 * name of the operand and in brackets the variable name of the 559 * corresponding argument in the cec-funcs.h function. 560 */ 561 562 /* Messages */ 563 564 /* One Touch Play Feature */ 565 #define CEC_MSG_ACTIVE_SOURCE 0x82 566 #define CEC_MSG_IMAGE_VIEW_ON 0x04 567 #define CEC_MSG_TEXT_VIEW_ON 0x0d 568 569 570 /* Routing Control Feature */ 571 572 /* 573 * Has also: 574 * CEC_MSG_ACTIVE_SOURCE 575 */ 576 577 #define CEC_MSG_INACTIVE_SOURCE 0x9d 578 #define CEC_MSG_REQUEST_ACTIVE_SOURCE 0x85 579 #define CEC_MSG_ROUTING_CHANGE 0x80 580 #define CEC_MSG_ROUTING_INFORMATION 0x81 581 #define CEC_MSG_SET_STREAM_PATH 0x86 582 583 584 /* Standby Feature */ 585 #define CEC_MSG_STANDBY 0x36 586 587 588 /* One Touch Record Feature */ 589 #define CEC_MSG_RECORD_OFF 0x0b 590 #define CEC_MSG_RECORD_ON 0x09 591 /* Record Source Type Operand (rec_src_type) */ 592 #define CEC_OP_RECORD_SRC_OWN 1 593 #define CEC_OP_RECORD_SRC_DIGITAL 2 594 #define CEC_OP_RECORD_SRC_ANALOG 3 595 #define CEC_OP_RECORD_SRC_EXT_PLUG 4 596 #define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR 5 597 /* Service Identification Method Operand (service_id_method) */ 598 #define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID 0 599 #define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL 1 600 /* Digital Service Broadcast System Operand (dig_bcast_system) */ 601 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN 0x00 602 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN 0x01 603 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN 0x02 604 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS 0x08 605 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS 0x09 606 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T 0x0a 607 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE 0x10 608 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT 0x11 609 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T 0x12 610 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C 0x18 611 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S 0x19 612 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2 0x1a 613 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T 0x1b 614 /* Analogue Broadcast Type Operand (ana_bcast_type) */ 615 #define CEC_OP_ANA_BCAST_TYPE_CABLE 0 616 #define CEC_OP_ANA_BCAST_TYPE_SATELLITE 1 617 #define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL 2 618 /* Broadcast System Operand (bcast_system) */ 619 #define CEC_OP_BCAST_SYSTEM_PAL_BG 0x00 620 #define CEC_OP_BCAST_SYSTEM_SECAM_LQ 0x01 /* SECAM L' */ 621 #define CEC_OP_BCAST_SYSTEM_PAL_M 0x02 622 #define CEC_OP_BCAST_SYSTEM_NTSC_M 0x03 623 #define CEC_OP_BCAST_SYSTEM_PAL_I 0x04 624 #define CEC_OP_BCAST_SYSTEM_SECAM_DK 0x05 625 #define CEC_OP_BCAST_SYSTEM_SECAM_BG 0x06 626 #define CEC_OP_BCAST_SYSTEM_SECAM_L 0x07 627 #define CEC_OP_BCAST_SYSTEM_PAL_DK 0x08 628 #define CEC_OP_BCAST_SYSTEM_OTHER 0x1f 629 /* Channel Number Format Operand (channel_number_fmt) */ 630 #define CEC_OP_CHANNEL_NUMBER_FMT_1_PART 0x01 631 #define CEC_OP_CHANNEL_NUMBER_FMT_2_PART 0x02 632 633 #define CEC_MSG_RECORD_STATUS 0x0a 634 /* Record Status Operand (rec_status) */ 635 #define CEC_OP_RECORD_STATUS_CUR_SRC 0x01 636 #define CEC_OP_RECORD_STATUS_DIG_SERVICE 0x02 637 #define CEC_OP_RECORD_STATUS_ANA_SERVICE 0x03 638 #define CEC_OP_RECORD_STATUS_EXT_INPUT 0x04 639 #define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE 0x05 640 #define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE 0x06 641 #define CEC_OP_RECORD_STATUS_NO_SERVICE 0x07 642 #define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG 0x09 643 #define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR 0x0a 644 #define CEC_OP_RECORD_STATUS_UNSUP_CA 0x0b 645 #define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS 0x0c 646 #define CEC_OP_RECORD_STATUS_CANT_COPY_SRC 0x0d 647 #define CEC_OP_RECORD_STATUS_NO_MORE_COPIES 0x0e 648 #define CEC_OP_RECORD_STATUS_NO_MEDIA 0x10 649 #define CEC_OP_RECORD_STATUS_PLAYING 0x11 650 #define CEC_OP_RECORD_STATUS_ALREADY_RECORDING 0x12 651 #define CEC_OP_RECORD_STATUS_MEDIA_PROT 0x13 652 #define CEC_OP_RECORD_STATUS_NO_SIGNAL 0x14 653 #define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM 0x15 654 #define CEC_OP_RECORD_STATUS_NO_SPACE 0x16 655 #define CEC_OP_RECORD_STATUS_PARENTAL_LOCK 0x17 656 #define CEC_OP_RECORD_STATUS_TERMINATED_OK 0x1a 657 #define CEC_OP_RECORD_STATUS_ALREADY_TERM 0x1b 658 #define CEC_OP_RECORD_STATUS_OTHER 0x1f 659 660 #define CEC_MSG_RECORD_TV_SCREEN 0x0f 661 662 663 /* Timer Programming Feature */ 664 #define CEC_MSG_CLEAR_ANALOGUE_TIMER 0x33 665 /* Recording Sequence Operand (recording_seq) */ 666 #define CEC_OP_REC_SEQ_SUNDAY 0x01 667 #define CEC_OP_REC_SEQ_MONDAY 0x02 668 #define CEC_OP_REC_SEQ_TUESDAY 0x04 669 #define CEC_OP_REC_SEQ_WEDNESDAY 0x08 670 #define CEC_OP_REC_SEQ_THURSDAY 0x10 671 #define CEC_OP_REC_SEQ_FRIDAY 0x20 672 #define CEC_OP_REC_SEQ_SATURDAY 0x40 673 #define CEC_OP_REC_SEQ_ONCE_ONLY 0x00 674 675 #define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99 676 677 #define CEC_MSG_CLEAR_EXT_TIMER 0xa1 678 /* External Source Specifier Operand (ext_src_spec) */ 679 #define CEC_OP_EXT_SRC_PLUG 0x04 680 #define CEC_OP_EXT_SRC_PHYS_ADDR 0x05 681 682 #define CEC_MSG_SET_ANALOGUE_TIMER 0x34 683 #define CEC_MSG_SET_DIGITAL_TIMER 0x97 684 #define CEC_MSG_SET_EXT_TIMER 0xa2 685 686 #define CEC_MSG_SET_TIMER_PROGRAM_TITLE 0x67 687 #define CEC_MSG_TIMER_CLEARED_STATUS 0x43 688 /* Timer Cleared Status Data Operand (timer_cleared_status) */ 689 #define CEC_OP_TIMER_CLR_STAT_RECORDING 0x00 690 #define CEC_OP_TIMER_CLR_STAT_NO_MATCHING 0x01 691 #define CEC_OP_TIMER_CLR_STAT_NO_INFO 0x02 692 #define CEC_OP_TIMER_CLR_STAT_CLEARED 0x80 693 694 #define CEC_MSG_TIMER_STATUS 0x35 695 /* Timer Overlap Warning Operand (timer_overlap_warning) */ 696 #define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP 0 697 #define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP 1 698 /* Media Info Operand (media_info) */ 699 #define CEC_OP_MEDIA_INFO_UNPROT_MEDIA 0 700 #define CEC_OP_MEDIA_INFO_PROT_MEDIA 1 701 #define CEC_OP_MEDIA_INFO_NO_MEDIA 2 702 /* Programmed Indicator Operand (prog_indicator) */ 703 #define CEC_OP_PROG_IND_NOT_PROGRAMMED 0 704 #define CEC_OP_PROG_IND_PROGRAMMED 1 705 /* Programmed Info Operand (prog_info) */ 706 #define CEC_OP_PROG_INFO_ENOUGH_SPACE 0x08 707 #define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE 0x09 708 #define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE 0x0b 709 #define CEC_OP_PROG_INFO_NONE_AVAILABLE 0x0a 710 /* Not Programmed Error Info Operand (prog_error) */ 711 #define CEC_OP_PROG_ERROR_NO_FREE_TIMER 0x01 712 #define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE 0x02 713 #define CEC_OP_PROG_ERROR_REC_SEQ_ERROR 0x03 714 #define CEC_OP_PROG_ERROR_INV_EXT_PLUG 0x04 715 #define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR 0x05 716 #define CEC_OP_PROG_ERROR_CA_UNSUPP 0x06 717 #define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS 0x07 718 #define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP 0x08 719 #define CEC_OP_PROG_ERROR_PARENTAL_LOCK 0x09 720 #define CEC_OP_PROG_ERROR_CLOCK_FAILURE 0x0a 721 #define CEC_OP_PROG_ERROR_DUPLICATE 0x0e 722 723 724 /* System Information Feature */ 725 #define CEC_MSG_CEC_VERSION 0x9e 726 /* CEC Version Operand (cec_version) */ 727 #define CEC_OP_CEC_VERSION_1_3A 4 728 #define CEC_OP_CEC_VERSION_1_4 5 729 #define CEC_OP_CEC_VERSION_2_0 6 730 731 #define CEC_MSG_GET_CEC_VERSION 0x9f 732 #define CEC_MSG_GIVE_PHYSICAL_ADDR 0x83 733 #define CEC_MSG_GET_MENU_LANGUAGE 0x91 734 #define CEC_MSG_REPORT_PHYSICAL_ADDR 0x84 735 /* Primary Device Type Operand (prim_devtype) */ 736 #define CEC_OP_PRIM_DEVTYPE_TV 0 737 #define CEC_OP_PRIM_DEVTYPE_RECORD 1 738 #define CEC_OP_PRIM_DEVTYPE_TUNER 3 739 #define CEC_OP_PRIM_DEVTYPE_PLAYBACK 4 740 #define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM 5 741 #define CEC_OP_PRIM_DEVTYPE_SWITCH 6 742 #define CEC_OP_PRIM_DEVTYPE_PROCESSOR 7 743 744 #define CEC_MSG_SET_MENU_LANGUAGE 0x32 745 #define CEC_MSG_REPORT_FEATURES 0xa6 /* HDMI 2.0 */ 746 /* All Device Types Operand (all_device_types) */ 747 #define CEC_OP_ALL_DEVTYPE_TV 0x80 748 #define CEC_OP_ALL_DEVTYPE_RECORD 0x40 749 #define CEC_OP_ALL_DEVTYPE_TUNER 0x20 750 #define CEC_OP_ALL_DEVTYPE_PLAYBACK 0x10 751 #define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM 0x08 752 #define CEC_OP_ALL_DEVTYPE_SWITCH 0x04 753 /* 754 * And if you wondering what happened to PROCESSOR devices: those should 755 * be mapped to a SWITCH. 756 */ 757 758 /* Valid for RC Profile and Device Feature operands */ 759 #define CEC_OP_FEAT_EXT 0x80 /* Extension bit */ 760 /* RC Profile Operand (rc_profile) */ 761 #define CEC_OP_FEAT_RC_TV_PROFILE_NONE 0x00 762 #define CEC_OP_FEAT_RC_TV_PROFILE_1 0x02 763 #define CEC_OP_FEAT_RC_TV_PROFILE_2 0x06 764 #define CEC_OP_FEAT_RC_TV_PROFILE_3 0x0a 765 #define CEC_OP_FEAT_RC_TV_PROFILE_4 0x0e 766 #define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU 0x50 767 #define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU 0x48 768 #define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU 0x44 769 #define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU 0x42 770 #define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU 0x41 771 /* Device Feature Operand (dev_features) */ 772 #define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN 0x40 773 #define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING 0x20 774 #define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL 0x10 775 #define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE 0x08 776 #define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX 0x04 777 #define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02 778 #define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_VOLUME_LEVEL 0x01 779 780 #define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */ 781 782 783 /* Deck Control Feature */ 784 #define CEC_MSG_DECK_CONTROL 0x42 785 /* Deck Control Mode Operand (deck_control_mode) */ 786 #define CEC_OP_DECK_CTL_MODE_SKIP_FWD 1 787 #define CEC_OP_DECK_CTL_MODE_SKIP_REV 2 788 #define CEC_OP_DECK_CTL_MODE_STOP 3 789 #define CEC_OP_DECK_CTL_MODE_EJECT 4 790 791 #define CEC_MSG_DECK_STATUS 0x1b 792 /* Deck Info Operand (deck_info) */ 793 #define CEC_OP_DECK_INFO_PLAY 0x11 794 #define CEC_OP_DECK_INFO_RECORD 0x12 795 #define CEC_OP_DECK_INFO_PLAY_REV 0x13 796 #define CEC_OP_DECK_INFO_STILL 0x14 797 #define CEC_OP_DECK_INFO_SLOW 0x15 798 #define CEC_OP_DECK_INFO_SLOW_REV 0x16 799 #define CEC_OP_DECK_INFO_FAST_FWD 0x17 800 #define CEC_OP_DECK_INFO_FAST_REV 0x18 801 #define CEC_OP_DECK_INFO_NO_MEDIA 0x19 802 #define CEC_OP_DECK_INFO_STOP 0x1a 803 #define CEC_OP_DECK_INFO_SKIP_FWD 0x1b 804 #define CEC_OP_DECK_INFO_SKIP_REV 0x1c 805 #define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD 0x1d 806 #define CEC_OP_DECK_INFO_INDEX_SEARCH_REV 0x1e 807 #define CEC_OP_DECK_INFO_OTHER 0x1f 808 809 #define CEC_MSG_GIVE_DECK_STATUS 0x1a 810 /* Status Request Operand (status_req) */ 811 #define CEC_OP_STATUS_REQ_ON 1 812 #define CEC_OP_STATUS_REQ_OFF 2 813 #define CEC_OP_STATUS_REQ_ONCE 3 814 815 #define CEC_MSG_PLAY 0x41 816 /* Play Mode Operand (play_mode) */ 817 #define CEC_OP_PLAY_MODE_PLAY_FWD 0x24 818 #define CEC_OP_PLAY_MODE_PLAY_REV 0x20 819 #define CEC_OP_PLAY_MODE_PLAY_STILL 0x25 820 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN 0x05 821 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED 0x06 822 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX 0x07 823 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN 0x09 824 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED 0x0a 825 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX 0x0b 826 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN 0x15 827 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED 0x16 828 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX 0x17 829 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN 0x19 830 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED 0x1a 831 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX 0x1b 832 833 834 /* Tuner Control Feature */ 835 #define CEC_MSG_GIVE_TUNER_DEVICE_STATUS 0x08 836 #define CEC_MSG_SELECT_ANALOGUE_SERVICE 0x92 837 #define CEC_MSG_SELECT_DIGITAL_SERVICE 0x93 838 #define CEC_MSG_TUNER_DEVICE_STATUS 0x07 839 /* Recording Flag Operand (rec_flag) */ 840 #define CEC_OP_REC_FLAG_NOT_USED 0 841 #define CEC_OP_REC_FLAG_USED 1 842 /* Tuner Display Info Operand (tuner_display_info) */ 843 #define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL 0 844 #define CEC_OP_TUNER_DISPLAY_INFO_NONE 1 845 #define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE 2 846 847 #define CEC_MSG_TUNER_STEP_DECREMENT 0x06 848 #define CEC_MSG_TUNER_STEP_INCREMENT 0x05 849 850 851 /* Vendor Specific Commands Feature */ 852 853 /* 854 * Has also: 855 * CEC_MSG_CEC_VERSION 856 * CEC_MSG_GET_CEC_VERSION 857 */ 858 #define CEC_MSG_DEVICE_VENDOR_ID 0x87 859 #define CEC_MSG_GIVE_DEVICE_VENDOR_ID 0x8c 860 #define CEC_MSG_VENDOR_COMMAND 0x89 861 #define CEC_MSG_VENDOR_COMMAND_WITH_ID 0xa0 862 #define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN 0x8a 863 #define CEC_MSG_VENDOR_REMOTE_BUTTON_UP 0x8b 864 865 866 /* OSD Display Feature */ 867 #define CEC_MSG_SET_OSD_STRING 0x64 868 /* Display Control Operand (disp_ctl) */ 869 #define CEC_OP_DISP_CTL_DEFAULT 0x00 870 #define CEC_OP_DISP_CTL_UNTIL_CLEARED 0x40 871 #define CEC_OP_DISP_CTL_CLEAR 0x80 872 873 874 /* Device OSD Transfer Feature */ 875 #define CEC_MSG_GIVE_OSD_NAME 0x46 876 #define CEC_MSG_SET_OSD_NAME 0x47 877 878 879 /* Device Menu Control Feature */ 880 #define CEC_MSG_MENU_REQUEST 0x8d 881 /* Menu Request Type Operand (menu_req) */ 882 #define CEC_OP_MENU_REQUEST_ACTIVATE 0x00 883 #define CEC_OP_MENU_REQUEST_DEACTIVATE 0x01 884 #define CEC_OP_MENU_REQUEST_QUERY 0x02 885 886 #define CEC_MSG_MENU_STATUS 0x8e 887 /* Menu State Operand (menu_state) */ 888 #define CEC_OP_MENU_STATE_ACTIVATED 0x00 889 #define CEC_OP_MENU_STATE_DEACTIVATED 0x01 890 891 #define CEC_MSG_USER_CONTROL_PRESSED 0x44 892 /* UI Command Operand (ui_cmd) */ 893 #define CEC_OP_UI_CMD_SELECT 0x00 894 #define CEC_OP_UI_CMD_UP 0x01 895 #define CEC_OP_UI_CMD_DOWN 0x02 896 #define CEC_OP_UI_CMD_LEFT 0x03 897 #define CEC_OP_UI_CMD_RIGHT 0x04 898 #define CEC_OP_UI_CMD_RIGHT_UP 0x05 899 #define CEC_OP_UI_CMD_RIGHT_DOWN 0x06 900 #define CEC_OP_UI_CMD_LEFT_UP 0x07 901 #define CEC_OP_UI_CMD_LEFT_DOWN 0x08 902 #define CEC_OP_UI_CMD_DEVICE_ROOT_MENU 0x09 903 #define CEC_OP_UI_CMD_DEVICE_SETUP_MENU 0x0a 904 #define CEC_OP_UI_CMD_CONTENTS_MENU 0x0b 905 #define CEC_OP_UI_CMD_FAVORITE_MENU 0x0c 906 #define CEC_OP_UI_CMD_BACK 0x0d 907 #define CEC_OP_UI_CMD_MEDIA_TOP_MENU 0x10 908 #define CEC_OP_UI_CMD_MEDIA_CONTEXT_SENSITIVE_MENU 0x11 909 #define CEC_OP_UI_CMD_NUMBER_ENTRY_MODE 0x1d 910 #define CEC_OP_UI_CMD_NUMBER_11 0x1e 911 #define CEC_OP_UI_CMD_NUMBER_12 0x1f 912 #define CEC_OP_UI_CMD_NUMBER_0_OR_NUMBER_10 0x20 913 #define CEC_OP_UI_CMD_NUMBER_1 0x21 914 #define CEC_OP_UI_CMD_NUMBER_2 0x22 915 #define CEC_OP_UI_CMD_NUMBER_3 0x23 916 #define CEC_OP_UI_CMD_NUMBER_4 0x24 917 #define CEC_OP_UI_CMD_NUMBER_5 0x25 918 #define CEC_OP_UI_CMD_NUMBER_6 0x26 919 #define CEC_OP_UI_CMD_NUMBER_7 0x27 920 #define CEC_OP_UI_CMD_NUMBER_8 0x28 921 #define CEC_OP_UI_CMD_NUMBER_9 0x29 922 #define CEC_OP_UI_CMD_DOT 0x2a 923 #define CEC_OP_UI_CMD_ENTER 0x2b 924 #define CEC_OP_UI_CMD_CLEAR 0x2c 925 #define CEC_OP_UI_CMD_NEXT_FAVORITE 0x2f 926 #define CEC_OP_UI_CMD_CHANNEL_UP 0x30 927 #define CEC_OP_UI_CMD_CHANNEL_DOWN 0x31 928 #define CEC_OP_UI_CMD_PREVIOUS_CHANNEL 0x32 929 #define CEC_OP_UI_CMD_SOUND_SELECT 0x33 930 #define CEC_OP_UI_CMD_INPUT_SELECT 0x34 931 #define CEC_OP_UI_CMD_DISPLAY_INFORMATION 0x35 932 #define CEC_OP_UI_CMD_HELP 0x36 933 #define CEC_OP_UI_CMD_PAGE_UP 0x37 934 #define CEC_OP_UI_CMD_PAGE_DOWN 0x38 935 #define CEC_OP_UI_CMD_POWER 0x40 936 #define CEC_OP_UI_CMD_VOLUME_UP 0x41 937 #define CEC_OP_UI_CMD_VOLUME_DOWN 0x42 938 #define CEC_OP_UI_CMD_MUTE 0x43 939 #define CEC_OP_UI_CMD_PLAY 0x44 940 #define CEC_OP_UI_CMD_STOP 0x45 941 #define CEC_OP_UI_CMD_PAUSE 0x46 942 #define CEC_OP_UI_CMD_RECORD 0x47 943 #define CEC_OP_UI_CMD_REWIND 0x48 944 #define CEC_OP_UI_CMD_FAST_FORWARD 0x49 945 #define CEC_OP_UI_CMD_EJECT 0x4a 946 #define CEC_OP_UI_CMD_SKIP_FORWARD 0x4b 947 #define CEC_OP_UI_CMD_SKIP_BACKWARD 0x4c 948 #define CEC_OP_UI_CMD_STOP_RECORD 0x4d 949 #define CEC_OP_UI_CMD_PAUSE_RECORD 0x4e 950 #define CEC_OP_UI_CMD_ANGLE 0x50 951 #define CEC_OP_UI_CMD_SUB_PICTURE 0x51 952 #define CEC_OP_UI_CMD_VIDEO_ON_DEMAND 0x52 953 #define CEC_OP_UI_CMD_ELECTRONIC_PROGRAM_GUIDE 0x53 954 #define CEC_OP_UI_CMD_TIMER_PROGRAMMING 0x54 955 #define CEC_OP_UI_CMD_INITIAL_CONFIGURATION 0x55 956 #define CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE 0x56 957 #define CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION 0x57 958 #define CEC_OP_UI_CMD_AUDIO_DESCRIPTION 0x58 959 #define CEC_OP_UI_CMD_INTERNET 0x59 960 #define CEC_OP_UI_CMD_3D_MODE 0x5a 961 #define CEC_OP_UI_CMD_PLAY_FUNCTION 0x60 962 #define CEC_OP_UI_CMD_PAUSE_PLAY_FUNCTION 0x61 963 #define CEC_OP_UI_CMD_RECORD_FUNCTION 0x62 964 #define CEC_OP_UI_CMD_PAUSE_RECORD_FUNCTION 0x63 965 #define CEC_OP_UI_CMD_STOP_FUNCTION 0x64 966 #define CEC_OP_UI_CMD_MUTE_FUNCTION 0x65 967 #define CEC_OP_UI_CMD_RESTORE_VOLUME_FUNCTION 0x66 968 #define CEC_OP_UI_CMD_TUNE_FUNCTION 0x67 969 #define CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION 0x68 970 #define CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION 0x69 971 #define CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION 0x6a 972 #define CEC_OP_UI_CMD_POWER_TOGGLE_FUNCTION 0x6b 973 #define CEC_OP_UI_CMD_POWER_OFF_FUNCTION 0x6c 974 #define CEC_OP_UI_CMD_POWER_ON_FUNCTION 0x6d 975 #define CEC_OP_UI_CMD_F1_BLUE 0x71 976 #define CEC_OP_UI_CMD_F2_RED 0x72 977 #define CEC_OP_UI_CMD_F3_GREEN 0x73 978 #define CEC_OP_UI_CMD_F4_YELLOW 0x74 979 #define CEC_OP_UI_CMD_F5 0x75 980 #define CEC_OP_UI_CMD_DATA 0x76 981 /* UI Broadcast Type Operand (ui_bcast_type) */ 982 #define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL 0x00 983 #define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA 0x01 984 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE 0x10 985 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T 0x20 986 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE 0x30 987 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT 0x40 988 #define CEC_OP_UI_BCAST_TYPE_DIGITAL 0x50 989 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_T 0x60 990 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE 0x70 991 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT 0x80 992 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT 0x90 993 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2 0x91 994 #define CEC_OP_UI_BCAST_TYPE_IP 0xa0 995 /* UI Sound Presentation Control Operand (ui_snd_pres_ctl) */ 996 #define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO 0x10 997 #define CEC_OP_UI_SND_PRES_CTL_KARAOKE 0x20 998 #define CEC_OP_UI_SND_PRES_CTL_DOWNMIX 0x80 999 #define CEC_OP_UI_SND_PRES_CTL_REVERB 0x90 1000 #define CEC_OP_UI_SND_PRES_CTL_EQUALIZER 0xa0 1001 #define CEC_OP_UI_SND_PRES_CTL_BASS_UP 0xb1 1002 #define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL 0xb2 1003 #define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN 0xb3 1004 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP 0xc1 1005 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL 0xc2 1006 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN 0xc3 1007 1008 #define CEC_MSG_USER_CONTROL_RELEASED 0x45 1009 1010 1011 /* Remote Control Passthrough Feature */ 1012 1013 /* 1014 * Has also: 1015 * CEC_MSG_USER_CONTROL_PRESSED 1016 * CEC_MSG_USER_CONTROL_RELEASED 1017 */ 1018 1019 1020 /* Power Status Feature */ 1021 #define CEC_MSG_GIVE_DEVICE_POWER_STATUS 0x8f 1022 #define CEC_MSG_REPORT_POWER_STATUS 0x90 1023 /* Power Status Operand (pwr_state) */ 1024 #define CEC_OP_POWER_STATUS_ON 0 1025 #define CEC_OP_POWER_STATUS_STANDBY 1 1026 #define CEC_OP_POWER_STATUS_TO_ON 2 1027 #define CEC_OP_POWER_STATUS_TO_STANDBY 3 1028 1029 1030 /* General Protocol Messages */ 1031 #define CEC_MSG_FEATURE_ABORT 0x00 1032 /* Abort Reason Operand (reason) */ 1033 #define CEC_OP_ABORT_UNRECOGNIZED_OP 0 1034 #define CEC_OP_ABORT_INCORRECT_MODE 1 1035 #define CEC_OP_ABORT_NO_SOURCE 2 1036 #define CEC_OP_ABORT_INVALID_OP 3 1037 #define CEC_OP_ABORT_REFUSED 4 1038 #define CEC_OP_ABORT_UNDETERMINED 5 1039 1040 #define CEC_MSG_ABORT 0xff 1041 1042 1043 /* System Audio Control Feature */ 1044 1045 /* 1046 * Has also: 1047 * CEC_MSG_USER_CONTROL_PRESSED 1048 * CEC_MSG_USER_CONTROL_RELEASED 1049 */ 1050 #define CEC_MSG_GIVE_AUDIO_STATUS 0x71 1051 #define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d 1052 #define CEC_MSG_REPORT_AUDIO_STATUS 0x7a 1053 /* Audio Mute Status Operand (aud_mute_status) */ 1054 #define CEC_OP_AUD_MUTE_STATUS_OFF 0 1055 #define CEC_OP_AUD_MUTE_STATUS_ON 1 1056 1057 #define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR 0xa3 1058 #define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR 0xa4 1059 #define CEC_MSG_SET_SYSTEM_AUDIO_MODE 0x72 1060 /* System Audio Status Operand (sys_aud_status) */ 1061 #define CEC_OP_SYS_AUD_STATUS_OFF 0 1062 #define CEC_OP_SYS_AUD_STATUS_ON 1 1063 1064 #define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST 0x70 1065 #define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS 0x7e 1066 /* Audio Format ID Operand (audio_format_id) */ 1067 #define CEC_OP_AUD_FMT_ID_CEA861 0 1068 #define CEC_OP_AUD_FMT_ID_CEA861_CXT 1 1069 1070 #define CEC_MSG_SET_AUDIO_VOLUME_LEVEL 0x73 1071 1072 /* Audio Rate Control Feature */ 1073 #define CEC_MSG_SET_AUDIO_RATE 0x9a 1074 /* Audio Rate Operand (audio_rate) */ 1075 #define CEC_OP_AUD_RATE_OFF 0 1076 #define CEC_OP_AUD_RATE_WIDE_STD 1 1077 #define CEC_OP_AUD_RATE_WIDE_FAST 2 1078 #define CEC_OP_AUD_RATE_WIDE_SLOW 3 1079 #define CEC_OP_AUD_RATE_NARROW_STD 4 1080 #define CEC_OP_AUD_RATE_NARROW_FAST 5 1081 #define CEC_OP_AUD_RATE_NARROW_SLOW 6 1082 1083 1084 /* Audio Return Channel Control Feature */ 1085 #define CEC_MSG_INITIATE_ARC 0xc0 1086 #define CEC_MSG_REPORT_ARC_INITIATED 0xc1 1087 #define CEC_MSG_REPORT_ARC_TERMINATED 0xc2 1088 #define CEC_MSG_REQUEST_ARC_INITIATION 0xc3 1089 #define CEC_MSG_REQUEST_ARC_TERMINATION 0xc4 1090 #define CEC_MSG_TERMINATE_ARC 0xc5 1091 1092 1093 /* Dynamic Audio Lipsync Feature */ 1094 /* Only for CEC 2.0 and up */ 1095 #define CEC_MSG_REQUEST_CURRENT_LATENCY 0xa7 1096 #define CEC_MSG_REPORT_CURRENT_LATENCY 0xa8 1097 /* Low Latency Mode Operand (low_latency_mode) */ 1098 #define CEC_OP_LOW_LATENCY_MODE_OFF 0 1099 #define CEC_OP_LOW_LATENCY_MODE_ON 1 1100 /* Audio Output Compensated Operand (audio_out_compensated) */ 1101 #define CEC_OP_AUD_OUT_COMPENSATED_NA 0 1102 #define CEC_OP_AUD_OUT_COMPENSATED_DELAY 1 1103 #define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY 2 1104 #define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY 3 1105 1106 1107 /* Capability Discovery and Control Feature */ 1108 #define CEC_MSG_CDC_MESSAGE 0xf8 1109 /* Ethernet-over-HDMI: nobody ever does this... */ 1110 #define CEC_MSG_CDC_HEC_INQUIRE_STATE 0x00 1111 #define CEC_MSG_CDC_HEC_REPORT_STATE 0x01 1112 /* HEC Functionality State Operand (hec_func_state) */ 1113 #define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED 0 1114 #define CEC_OP_HEC_FUNC_STATE_INACTIVE 1 1115 #define CEC_OP_HEC_FUNC_STATE_ACTIVE 2 1116 #define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD 3 1117 /* Host Functionality State Operand (host_func_state) */ 1118 #define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED 0 1119 #define CEC_OP_HOST_FUNC_STATE_INACTIVE 1 1120 #define CEC_OP_HOST_FUNC_STATE_ACTIVE 2 1121 /* ENC Functionality State Operand (enc_func_state) */ 1122 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED 0 1123 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE 1 1124 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE 2 1125 /* CDC Error Code Operand (cdc_errcode) */ 1126 #define CEC_OP_CDC_ERROR_CODE_NONE 0 1127 #define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED 1 1128 #define CEC_OP_CDC_ERROR_CODE_WRONG_STATE 2 1129 #define CEC_OP_CDC_ERROR_CODE_OTHER 3 1130 /* HEC Support Operand (hec_support) */ 1131 #define CEC_OP_HEC_SUPPORT_NO 0 1132 #define CEC_OP_HEC_SUPPORT_YES 1 1133 /* HEC Activation Operand (hec_activation) */ 1134 #define CEC_OP_HEC_ACTIVATION_ON 0 1135 #define CEC_OP_HEC_ACTIVATION_OFF 1 1136 1137 #define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT 0x02 1138 #define CEC_MSG_CDC_HEC_SET_STATE 0x03 1139 /* HEC Set State Operand (hec_set_state) */ 1140 #define CEC_OP_HEC_SET_STATE_DEACTIVATE 0 1141 #define CEC_OP_HEC_SET_STATE_ACTIVATE 1 1142 1143 #define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION 0x04 1144 #define CEC_MSG_CDC_HEC_NOTIFY_ALIVE 0x05 1145 #define CEC_MSG_CDC_HEC_DISCOVER 0x06 1146 /* Hotplug Detect messages */ 1147 #define CEC_MSG_CDC_HPD_SET_STATE 0x10 1148 /* HPD State Operand (hpd_state) */ 1149 #define CEC_OP_HPD_STATE_CP_EDID_DISABLE 0 1150 #define CEC_OP_HPD_STATE_CP_EDID_ENABLE 1 1151 #define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE 2 1152 #define CEC_OP_HPD_STATE_EDID_DISABLE 3 1153 #define CEC_OP_HPD_STATE_EDID_ENABLE 4 1154 #define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE 5 1155 #define CEC_MSG_CDC_HPD_REPORT_STATE 0x11 1156 /* HPD Error Code Operand (hpd_error) */ 1157 #define CEC_OP_HPD_ERROR_NONE 0 1158 #define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE 1 1159 #define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE 2 1160 #define CEC_OP_HPD_ERROR_OTHER 3 1161 #define CEC_OP_HPD_ERROR_NONE_NO_VIDEO 4 1162 1163 /* End of Messages */ 1164 1165 /* Helper functions to identify the 'special' CEC devices */ 1166 1167 static __inline__ int cec_is_2nd_tv(const struct cec_log_addrs *las) 1168 { 1169 /* 1170 * It is a second TV if the logical address is 14 or 15 and the 1171 * primary device type is a TV. 1172 */ 1173 return las->num_log_addrs && 1174 las->log_addr[0] >= CEC_LOG_ADDR_SPECIFIC && 1175 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_TV; 1176 } 1177 1178 static __inline__ int cec_is_processor(const struct cec_log_addrs *las) 1179 { 1180 /* 1181 * It is a processor if the logical address is 12-15 and the 1182 * primary device type is a Processor. 1183 */ 1184 return las->num_log_addrs && 1185 las->log_addr[0] >= CEC_LOG_ADDR_BACKUP_1 && 1186 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_PROCESSOR; 1187 } 1188 1189 static __inline__ int cec_is_switch(const struct cec_log_addrs *las) 1190 { 1191 /* 1192 * It is a switch if the logical address is 15 and the 1193 * primary device type is a Switch and the CDC-Only flag is not set. 1194 */ 1195 return las->num_log_addrs == 1 && 1196 las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED && 1197 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH && 1198 !(las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY); 1199 } 1200 1201 static __inline__ int cec_is_cdc_only(const struct cec_log_addrs *las) 1202 { 1203 /* 1204 * It is a CDC-only device if the logical address is 15 and the 1205 * primary device type is a Switch and the CDC-Only flag is set. 1206 */ 1207 return las->num_log_addrs == 1 && 1208 las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED && 1209 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH && 1210 (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY); 1211 } 1212 1213 #endif