ch11.h (9045B) - Raw
1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * This file holds Hub protocol constants and data structures that are 4 * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. 5 * 6 * It is used/shared between the USB core, the HCDs and couple of other USB 7 * drivers. 8 */ 9 10 #ifndef __LINUX_CH11_H 11 #define __LINUX_CH11_H 12 13 #include <linux/types.h> /* __u8 etc */ 14 15 /* This is arbitrary. 16 * From USB 2.0 spec Table 11-13, offset 7, a hub can 17 * have up to 255 ports. The most yet reported is 10. 18 * Upcoming hardware might raise that limit. 19 * Because the arrays need to add a bit for hub status data, we 20 * use 31, so plus one evens out to four bytes. 21 */ 22 #define USB_MAXCHILDREN 31 23 24 /* See USB 3.1 spec Table 10-5 */ 25 #define USB_SS_MAXPORTS 15 26 27 /* 28 * Hub request types 29 */ 30 31 #define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) 32 #define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) 33 34 /* 35 * Port status type for GetPortStatus requests added in USB 3.1 36 * See USB 3.1 spec Table 10-12 37 */ 38 #define HUB_PORT_STATUS 0 39 #define HUB_PORT_PD_STATUS 1 40 #define HUB_EXT_PORT_STATUS 2 41 42 /* 43 * Hub class requests 44 * See USB 2.0 spec Table 11-16 45 */ 46 #define HUB_CLEAR_TT_BUFFER 8 47 #define HUB_RESET_TT 9 48 #define HUB_GET_TT_STATE 10 49 #define HUB_STOP_TT 11 50 51 /* 52 * Hub class additional requests defined by USB 3.0 spec 53 * See USB 3.0 spec Table 10-6 54 */ 55 #define HUB_SET_DEPTH 12 56 #define HUB_GET_PORT_ERR_COUNT 13 57 58 /* 59 * Hub Class feature numbers 60 * See USB 2.0 spec Table 11-17 61 */ 62 #define C_HUB_LOCAL_POWER 0 63 #define C_HUB_OVER_CURRENT 1 64 65 /* 66 * Port feature numbers 67 * See USB 2.0 spec Table 11-17 68 */ 69 #define USB_PORT_FEAT_CONNECTION 0 70 #define USB_PORT_FEAT_ENABLE 1 71 #define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ 72 #define USB_PORT_FEAT_OVER_CURRENT 3 73 #define USB_PORT_FEAT_RESET 4 74 #define USB_PORT_FEAT_L1 5 /* L1 suspend */ 75 #define USB_PORT_FEAT_POWER 8 76 #define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ 77 #define USB_PORT_FEAT_C_CONNECTION 16 78 #define USB_PORT_FEAT_C_ENABLE 17 79 #define USB_PORT_FEAT_C_SUSPEND 18 80 #define USB_PORT_FEAT_C_OVER_CURRENT 19 81 #define USB_PORT_FEAT_C_RESET 20 82 #define USB_PORT_FEAT_TEST 21 83 #define USB_PORT_FEAT_INDICATOR 22 84 #define USB_PORT_FEAT_C_PORT_L1 23 85 86 /* 87 * Port feature selectors added by USB 3.0 spec. 88 * See USB 3.0 spec Table 10-7 89 */ 90 #define USB_PORT_FEAT_LINK_STATE 5 91 #define USB_PORT_FEAT_U1_TIMEOUT 23 92 #define USB_PORT_FEAT_U2_TIMEOUT 24 93 #define USB_PORT_FEAT_C_PORT_LINK_STATE 25 94 #define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 95 #define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 96 #define USB_PORT_FEAT_BH_PORT_RESET 28 97 #define USB_PORT_FEAT_C_BH_PORT_RESET 29 98 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 99 100 #define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) 101 102 /* USB 3.0 hub remote wake mask bits, see table 10-14 */ 103 #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) 104 #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) 105 #define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) 106 107 /* 108 * Hub Status and Hub Change results 109 * See USB 2.0 spec Table 11-19 and Table 11-20 110 * USB 3.1 extends the port status request and may return 4 additional bytes. 111 * See USB 3.1 spec section 10.16.2.6 Table 10-12 and 10-15 112 */ 113 struct usb_port_status { 114 __le16 wPortStatus; 115 __le16 wPortChange; 116 __le32 dwExtPortStatus; 117 } __attribute__ ((packed)); 118 119 /* 120 * wPortStatus bit field 121 * See USB 2.0 spec Table 11-21 122 */ 123 #define USB_PORT_STAT_CONNECTION 0x0001 124 #define USB_PORT_STAT_ENABLE 0x0002 125 #define USB_PORT_STAT_SUSPEND 0x0004 126 #define USB_PORT_STAT_OVERCURRENT 0x0008 127 #define USB_PORT_STAT_RESET 0x0010 128 #define USB_PORT_STAT_L1 0x0020 129 /* bits 6 to 7 are reserved */ 130 #define USB_PORT_STAT_POWER 0x0100 131 #define USB_PORT_STAT_LOW_SPEED 0x0200 132 #define USB_PORT_STAT_HIGH_SPEED 0x0400 133 #define USB_PORT_STAT_TEST 0x0800 134 #define USB_PORT_STAT_INDICATOR 0x1000 135 /* bits 13 to 15 are reserved */ 136 137 /* 138 * Additions to wPortStatus bit field from USB 3.0 139 * See USB 3.0 spec Table 10-10 140 */ 141 #define USB_PORT_STAT_LINK_STATE 0x01e0 142 #define USB_SS_PORT_STAT_POWER 0x0200 143 #define USB_SS_PORT_STAT_SPEED 0x1c00 144 #define USB_PORT_STAT_SPEED_5GBPS 0x0000 145 /* Valid only if port is enabled */ 146 /* Bits that are the same from USB 2.0 */ 147 #define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ 148 USB_PORT_STAT_ENABLE | \ 149 USB_PORT_STAT_OVERCURRENT | \ 150 USB_PORT_STAT_RESET) 151 152 /* 153 * Definitions for PORT_LINK_STATE values 154 * (bits 5-8) in wPortStatus 155 */ 156 #define USB_SS_PORT_LS_U0 0x0000 157 #define USB_SS_PORT_LS_U1 0x0020 158 #define USB_SS_PORT_LS_U2 0x0040 159 #define USB_SS_PORT_LS_U3 0x0060 160 #define USB_SS_PORT_LS_SS_DISABLED 0x0080 161 #define USB_SS_PORT_LS_RX_DETECT 0x00a0 162 #define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 163 #define USB_SS_PORT_LS_POLLING 0x00e0 164 #define USB_SS_PORT_LS_RECOVERY 0x0100 165 #define USB_SS_PORT_LS_HOT_RESET 0x0120 166 #define USB_SS_PORT_LS_COMP_MOD 0x0140 167 #define USB_SS_PORT_LS_LOOPBACK 0x0160 168 169 /* 170 * wPortChange bit field 171 * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 172 * Bits 0 to 5 shown, bits 6 to 15 are reserved 173 */ 174 #define USB_PORT_STAT_C_CONNECTION 0x0001 175 #define USB_PORT_STAT_C_ENABLE 0x0002 176 #define USB_PORT_STAT_C_SUSPEND 0x0004 177 #define USB_PORT_STAT_C_OVERCURRENT 0x0008 178 #define USB_PORT_STAT_C_RESET 0x0010 179 #define USB_PORT_STAT_C_L1 0x0020 180 /* 181 * USB 3.0 wPortChange bit fields 182 * See USB 3.0 spec Table 10-11 183 */ 184 #define USB_PORT_STAT_C_BH_RESET 0x0020 185 #define USB_PORT_STAT_C_LINK_STATE 0x0040 186 #define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 187 188 /* 189 * USB 3.1 dwExtPortStatus field masks 190 * See USB 3.1 spec 10.16.2.6.3 Table 10-15 191 */ 192 193 #define USB_EXT_PORT_STAT_RX_SPEED_ID 0x0000000f 194 #define USB_EXT_PORT_STAT_TX_SPEED_ID 0x000000f0 195 #define USB_EXT_PORT_STAT_RX_LANES 0x00000f00 196 #define USB_EXT_PORT_STAT_TX_LANES 0x0000f000 197 198 #define USB_EXT_PORT_RX_LANES(p) \ 199 (((p) & USB_EXT_PORT_STAT_RX_LANES) >> 8) 200 #define USB_EXT_PORT_TX_LANES(p) \ 201 (((p) & USB_EXT_PORT_STAT_TX_LANES) >> 12) 202 203 /* 204 * wHubCharacteristics (masks) 205 * See USB 2.0 spec Table 11-13, offset 3 206 */ 207 #define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ 208 #define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ 209 #define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ 210 #define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ 211 212 #define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ 213 214 #define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ 215 #define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ 216 #define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ 217 #define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ 218 219 #define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ 220 #define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ 221 222 struct usb_hub_status { 223 __le16 wHubStatus; 224 __le16 wHubChange; 225 } __attribute__ ((packed)); 226 227 /* 228 * Hub Status & Hub Change bit masks 229 * See USB 2.0 spec Table 11-19 and Table 11-20 230 * Bits 0 and 1 for wHubStatus and wHubChange 231 * Bits 2 to 15 are reserved for both 232 */ 233 #define HUB_STATUS_LOCAL_POWER 0x0001 234 #define HUB_STATUS_OVERCURRENT 0x0002 235 #define HUB_CHANGE_LOCAL_POWER 0x0001 236 #define HUB_CHANGE_OVERCURRENT 0x0002 237 238 239 /* 240 * Hub descriptor 241 * See USB 2.0 spec Table 11-13 242 */ 243 244 #define USB_DT_HUB (USB_TYPE_CLASS | 0x09) 245 #define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) 246 #define USB_DT_HUB_NONVAR_SIZE 7 247 #define USB_DT_SS_HUB_SIZE 12 248 249 /* 250 * Hub Device descriptor 251 * USB Hub class device protocols 252 */ 253 254 #define USB_HUB_PR_FS 0 /* Full speed hub */ 255 #define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ 256 #define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ 257 #define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ 258 #define USB_HUB_PR_SS 3 /* Super speed hub */ 259 260 struct usb_hub_descriptor { 261 __u8 bDescLength; 262 __u8 bDescriptorType; 263 __u8 bNbrPorts; 264 __le16 wHubCharacteristics; 265 __u8 bPwrOn2PwrGood; 266 __u8 bHubContrCurrent; 267 268 /* 2.0 and 3.0 hubs differ here */ 269 union { 270 struct { 271 /* add 1 bit for hub status change; round to bytes */ 272 __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; 273 __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; 274 } __attribute__ ((packed)) hs; 275 276 struct { 277 __u8 bHubHdrDecLat; 278 __le16 wHubDelay; 279 __le16 DeviceRemovable; 280 } __attribute__ ((packed)) ss; 281 } u; 282 } __attribute__ ((packed)); 283 284 /* port indicator status selectors, tables 11-7 and 11-25 */ 285 #define HUB_LED_AUTO 0 286 #define HUB_LED_AMBER 1 287 #define HUB_LED_GREEN 2 288 #define HUB_LED_OFF 3 289 290 enum hub_led_mode { 291 INDICATOR_AUTO = 0, 292 INDICATOR_CYCLE, 293 /* software blinks for attention: software, hardware, reserved */ 294 INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, 295 INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, 296 INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF 297 } __attribute__ ((packed)); 298 299 /* Transaction Translator Think Times, in bits */ 300 #define HUB_TTTT_8_BITS 0x00 301 #define HUB_TTTT_16_BITS 0x20 302 #define HUB_TTTT_24_BITS 0x40 303 #define HUB_TTTT_32_BITS 0x60 304 305 #endif /* __LINUX_CH11_H */