Rather than getting all ref names and prefixes and saving them
in memory to perform the check for conflicting names, rely on
RefDirectory.isNameConflicting as it is no longer an expensive
call after it was optimized in Ie994fc.
The old optimization to save ref names and prefixes in memory
was targeted towards making clones faster. With this change,
the clone performance is unaffected when tests were done with
repos containing many(~500k) refs.
Here are few recorded elapsed times for creating 10 branches
using BatchRefUpdate on NFS based repositories with varying
loose refs count. As seen here, this change helps improve the
BatchRefUpdate performance from O(n^2) to O(1).
loose_refs_count with_change without_change
50 241 ms 310 ms
300 263 ms 1502 ms
1k 181 ms 4241 ms
2k 204 ms 6440 ms
9k 158 ms 25930 ms
20k 154 ms 60443 ms
50k 171 ms 135199 ms
110k 157 ms 329450 ms
160k 209 ms 396328 ms
This update improves the Gerrit notedb migration performance
as it uses BatchRefUpdate to write change meta refs similar to
the test performed above.
Change-Id: I853ac6c7feb4b39c3156c01876b38cbd182accfe
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Update tests to record the number of events fired post-setup and only
assert for events fired during BatchRefUpdate.execute. For tests which
use writeLooseRef to setup refs, create new tests which assert the
number of RefsChangedEvent(s) rather than updating the existing ones
to call RefDirectory.exactRef as it changes the code path.
Change-Id: I0187811628d179d9c7e874c9bb8a7ddb44dd9df4
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Avoid having to scan over ALL loose refs to determine if the
name is nested within or is a container of an existing reference.
This can get really expensive if there are too many loose refs.
Instead use exactRef and getRefsByPrefix which scan based on a
prefix.
With a simple shell script(like below) using jgit client to create
1k refs in a new repository on NFS, this change brings down the time
from 12mins to 7mins.
for ref in $(seq 1 1000); do
jgit branch "$ref"
done
Here are few recorded elapsed times to create a new branch on NFS
based repositories with varying loose refs count. As we see here,
this change improves the name conflicting check from O(n^2) to O(1).
loose_refs_count with_change without_change
50 44 ms 164 ms
300 45 ms 1193 ms
1k 38 ms 2610 ms
2k 44 ms 6003 ms
9k 46 ms 27860 ms
20k 45 ms 48591 ms
50k 51 ms 135471 ms
110k 43 ms 294252 ms
160k 52 ms 430976 ms
Change-Id: Ie994fc184b8f82811bfb37b111eb9733dbe3e6e0
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
- bazlets need to be updated to react on Maven central no longer
supporting http protocol but only https
- update bazel to 2.0
Change-Id: I07f5f050f3b1db2014a5198a28b6bbf893434814
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit d74daad1e0)
* stable-5.10:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I0f1511be5375716d41565e72b271cb956c3e847b
* stable-5.9:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: Ifa135077d8d07d2317df3b479822e30d87eca950
* stable-5.8:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I9ca7a0237f87d1d4bcaba81e709eaa67902f27e5
* stable-5.7:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I7ed3f47cb46e6c1bf483702c8925a24e88658e47
* stable-5.6:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I45d444b360485564744bf3dfad2c2f5a5e7fcdf6
* stable-5.9:
LockFile: create OutputStream only when needed
Remove ReftableNumbersNotIncreasingException
Fix stamping to produce stable file timestamps
Change-Id: I056382d1d93f3e0a95838bdd1f0be89711c8a722
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
For RSA keys, there may be several configured signature algorithms:
rsa-sha2-512, rsa-sha2-256, and ssh-rsa. Upstream sshd has bug
SSHD-1105 [1] and always and unconditionally uses only the first
configured algorithm. With the default order, this means that it cannot
connect to a server that knows only ssh-rsa, like for instance Apache
MINA sshd servers older than 2.6.0.
This affects for instance bitbucket.org or also AWS Code Commit.
Re-introduce our own pubkey authenticator that fixes this.
Note that a server may impose a penalty (back-off delay) for subsequent
authentication attempts with signature algorithms unknown to the server.
In such cases, users can re-order the signature algorithm list via the
PubkeyAcceptedAlgorithms (formerly PubkeyAcceptedKeyTypes) ssh config.
[1] https://issues.apache.org/jira/browse/SSHD-1105
Bug: 572056
Change-Id: I7fb9c759ab6532e5f3b6524e9084085ddb2f30d6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
OpenSSH has changed some things in ssh config files. Update our parser
to implement some of these changes:
* ignore trailing comments on a line
* rename PubkeyAcceptedKeyTypes to PubkeyAcceptedAlgorithms
Note that for the rename, openSSH still accepts both names. We do the
same, translating names whenever we get or set values.
Change-Id: Icccca060e6a4350a7acf05ff9e260f2c8c60ee1a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Apache MINA sshd 2.6.0 appears to use only the first appropriate
public key signature algorithm for a particular key. See [1]. For
RSA keys, that is rsa-sha2-512. This breaks authentication at servers
that only know the older (and deprecated) ssh-rsa algorithm.
With PubkeyAcceptedAlgorithms, users can re-order algorithms in
the ssh config file per host, if needed. Setting
PubkeyAcceptedAlgorithms ^ssh-rsa
will put "ssh-rsa" at the front of the list of algorithms, and then
authentication at such servers with RSA keys works again.
[1] https://issues.apache.org/jira/browse/SSHD-1105
Bug: 572056
Change-Id: I86c3b93f05960c68936e80642965815926bb2532
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* master:
Manually set status of jmh dependencies
Update DEPENDENCIES report for 5.11.0
Add dependency to dash-licenses
PackFile: Add id + ext based constructors
GC: deleteOrphans: Use PackFile
PackExt: Convert to Enum
Restore preserved packs during missing object seeks
Pack: Replace extensions bitset with bitmapIdx PackFile
PackDirectory: Use PackFile to ensure we find preserved packs
GC: Use PackFile to de-dup logic
Create a PackFile class for Pack filenames
Change-Id: I1d56517cb6a95e10aed22cdb9e5f3e504872d110
The following jmh dependencies were approved as works-with:
- jmh-core/1.21 has GPL-2.0 license and was approved in CQ20517
- jmh-generator-annprocess/1.21 has GPL-2.0 license and was approved in
CQ20518
Change-Id: Ibbe28c6e8359c576b23f40281e74f2e0d4a0dee0
This is required to run the license check using the license tool [1]
required by the Eclipse project handbook [2]:
mvn org.eclipse.dash:license-tool-plugin:license-check -Ddash.summary=DEPENDENCIES
Note: the tool still requires Java 11 hence it needs to be run in a
separate build step and is not yet integrated in the build which runs
on Java 8.
[1] https://github.com/eclipse/dash-licenses
[2] https://www.eclipse.org/projects/handbook/#ip-license-tool
Change-Id: Ib41d54de246c3c9499cc3be9f026294c39fdfd99
Add new constructors to PackFile to improve a common use case where
callers know the directory, id, and extension, but previously needed to
construct a valid file name (with prefix, '.', etc) to create a
PackFile. Most callers can use the variant that has id as an ObjectId,
but provide an id as String variant too.
Change-Id: I39e4466abe8c9509f5916d5bfe675066570b8585
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
It's easier to follow the logic here when we can use our own objects
instead of Strings.
Change-Id: I6a166edcc67903fc1ca3544f458634c4cef8fde7
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
This class already looked very much like an Enum, but wasn't one.
As an Enum, we can use PackExt in EnumMaps and EnumSets. Convert the
Map key usage in PackDirectory to an EnumMap.
Change-Id: Ice097fd468a05805f914e6862fbd1d96ec8c45d1
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Provide a recovery path for objects being referenced during the pack
pruning race. Due to the pack pruning race, it is possible for objects
to become referenced after a pack has been deemed safe to prune, but
before it actually gets pruned. If this happened previously, the newly
referenced objects would be missing and potentially result in a
corrupted ref.
Add the ability to recover from this situation when an object is missing
but happens to still be available in a pack in the "preserved"
directory. This is likely only useful when used in conjunction with the
--preserve-old-packs GC option, which prunes packs by hard-linking to
the preserved directory. If an object is missing and found in a pack in
the preserved directory, immediately recover that pack and its
associated files (idx, bitmaps...) by moving them back to the original
pack directory, and then retry the operation that would have failed due
to the missing object. This retry can now succeed and the repository
may avoid corruption. This approach should drastically reduce the
chance of a corrupt repository during pack pruning at very little extra
cost. This extra cost should only be incurred when objects are missing
and a failure would normally occur.
Change-Id: I2a704e3276b88cc892159d9bfe2455c6eec64252
Signed-off-by: Martin Fick <quic_mfick@quicinc.com>
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Matthias Sohn