These objects don't need to be updated with the resulting ObjectId of
the formatted content, callers can get that from the ObjectInserter on
their own.
Change-Id: Idc5f097de9f7beafc5e54e597383d82daf9d7db4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
The correct names for these is build(), as that is what a Java
developer will expect given the "builder" pattern.
Bug: 323541
Change-Id: I35042bdc95a955beeaee29e54bde10e4240b2a71
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
When in OURS and THEIRS a new file is created we want a conflict
when the two contents differ. If on two branches the same file
with the same content is created this should not be a conflict.
But: the current merge algorithm is throwing NPEs in this case.
Fix this by choosing an empty RawText as common base if the
base is empty.
Change-Id: I21cb23f852965b82fb82ccd66ec961c7edb3ac3d
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
If the CLI stops a rebase upon conflict, the current
step is already popped from the git-rebase-todo and appended to the
"done" file. The current implementation wrongly pops the step only
after successful cherry-pick.
Change-Id: I8640dda0cbb2a5271ecf75fcbad69410122eeab6
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
The Repository is then in state "Rebase interactive".
Change-Id: I5d2de57f8670e1d4c71ed22509ab17f04e2561b5
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
The IndexDiff had not collected the info if the flag
"assume-unchanged" is set. This information is useful for clients
which may want to decide if specific actions are allowed on a file.
Bug: 326213
Change-Id: I14bb7b03247d6c0b429a9d8d3f6b10f21d8ddeb1
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
When the assume unchanged flag is set the Add command must not update
the index for this file if any changes are present in the working
directory.
Bug: 331351
Change-Id: I255870f689225a1d88971182e0eb377952641b42
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
The referenced bug showed that JGit produced different merge results
compared to C Git. Unit test was added to reproduce the issue. The
problem can be solved by switching to histogram diff algorithm.
Bug: 331078
Change-Id: I54f30afb3a9fef1dbca365ca5f98f4cc846092e3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
The diff algorithm which is used by Merge, Cherry-Pick, Rebase
should be configurable. A new configuration parameter "diff.algorithm"
is introduced which currently accepts the values "myers" or
"histogram". Based on this parameter for example the ResolveMerger
will choose a diff algorithm. The reason for this is bug 331078.
This bug shows that JGit is more compatible with C Git when
histogram diff is in place. But since histogram diff is quite new we
need an easy way to fall back to Myers diff.
Bug: 331078
Change-Id: I2549c992e478d991c61c9508ad826d1a9e539ae3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Check for deletion of temporary files in .git folder.
Check for deletion and creation of files.
Change-Id: I60b0b2975724f2e3582e8674d9f876dcbf62b350
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Coverage tests showed that we are missing to test certain areas
in the rebase command. Add the missing tests.
Change-Id: Ia4a272d26cde7e1861dac30496e4b6799fc8187a
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Add the ability to checkout a branch to the working tree.
Bug: 330860
Change-Id: Ie06b9e799a9e1be384da0b8996efa7209b32eac3
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
There was a bug introduced by commit 0e815fe. For non-versioned files
the merge algorithm detected an incoming deletion from THEIRS.
Consequently such files were deleted. That's a severe bug which was
fixed by more precisely detecting incoming deletions.
Change-Id: I4385d3c990db11d62e371a385dc8ee89841db84a
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This is a first iteration to implement Rebase. At the moment, this
does not implement --continue and --skip, so if the first
conflict is found, the only option is to --abort the command.
Bug: 328217
Change-Id: I24d60c0214e71e5572955f8261e10a42e9e95298
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
In the case where DirCacheCheckout was used to checkout a tree
without taking HEAD into account (e.g. during a clone or hard reset)
we didn't handle conflicts correctly. E.g. if there are conflicts
(entries with stage != 0) in the index and we tried to hard reset
we have been processing the conflicting pathes multiple times (once
for every stage). With this fix we will update the index with the
entry from the "merge" state (the state we want checkout) when we
detect existing conflicts.
Change-Id: Iffbddccaa588cf0d1460a5e44dabaf540d996e26
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
* rename-detection:
RenameDetector: Only scan deletes if adds exist
SimilarityRenameDetector: Initialize sizes to 0
SimilarityRenameDetector: Avoid allocating source index
SimilarityRenameDetector: Only attempt to index large files once
SimilarityIndex: Don't overflow internal counter fields
SimilarityIndex: Accept files larger than 8 MB
SimilarityIndex: Correct comment explaining the logic
Leaf level notes trees are split into a new fan-out tree if an
insertion occurs and the tree already contains >= 256 notes in it.
The splitting may occur multiple times if all of the notes have the
same prefix; in the worst case this produces a tree path such as
"00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/be" if all
of the notes begin with zeros.
Change-Id: I2d7d98f35108def9ec49936ddbdc34b13822a3c7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is necessary to allow applications to wrap the note tree in
a commit and update the note branch with the new state.
Change-Id: Idbd7ead4a1b16ae2b64a30a4a01a29cfed548cdf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
NoteMap now supports editing in-memory, allowing applications to
modify the NoteMap once it has been loaded from the branch. The
ability to write the branch back to tree objects is not yet done,
so the edits are strictly transient.
Change-Id: I63448954abfca2a8e3e95369cd84c0d1176cdb79
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Files bigger than 8 MB (2^23 bytes) tended to overflow the internal
hashtable, as the table was capped in size to 2^17 records. If a
file contained 2^17 unique data blocks/lines, the table insertion
got stuck in an infinite loop as the able couldn't grow, and there
was no open slot for the new item.
Remove the artifical 2^17 table limit and instead allow the table
to grow to be as big as 2^30. With a 64 byte block size, this
permits hashing inputs as large as 64 GB.
If the table reaches 2^30 (or cannot be allocated) hashing is
aborted. RenameDetector no longer tries to break a modify file pair,
and it does not try to match the file for rename or copy detection.
Change-Id: Ibb4d756844f4667e181e24a34a468dc3655863ac
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The NoteMap makes it easy to read a small notes tree as created by
the `git notes` command in C Git. To make the initial implementation
simple a notes tree is read recursively into a map in memory.
This is reasonable if the application will need to access all notes,
or if there are less than 256 notes in the tree, but doesn't behave
well when the number of notes exceeds 256 and the application
doesn't need to access all of them.
We can later add support for lazily loading different subpaths,
thus fixing the large note tree problem described above.
Currently the implementation only supports reading. Writing notes
is more complex because trees need to be expanded or collapsed at
the exact 256 entry cut-off in order to retain the same tree SHA-1
that C Git would use for the same content. It also needs to retain
non-note tree entries such as ".gitignore" or ".gitattribute" files
that might randomly appear within a notes tree. We can also add
writing support later.
Change-Id: I93704bd84ebf650d51de34da3f1577ef0f7a9144
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Test was broken by commit b087bba3 changing formatting of merge
commit messages.
Change-Id: I98b1b936b9b6cbaa50fbc59d243a43e66a6ee9f9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We stopped handling URIs such as "example.com:/some/p ath", because
this was confused with the Windows absolute path syntax of "c:/path".
Support absolute style scp URIs again, but only when the host name
is more than 2 characters long.
Change-Id: I9ab049bc9aad2d8d42a78c7ab34fa317a28efc1a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
IndexDiff was extended to detect files which are both removed from the
index and untracked. Before this change these files were only added
to the removed collection.
Change-Id: I971d8261d2e8932039fce462b59c12e143f79f90
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There was a bug in ResolveMerger which is one reason for
bug 328841. If a merge was failing because of conflicts
deletions where not handled correctly. Files which have
to be deleted (because there was a non-conflicting deletion
coming in from THEIRS) are not deleted. In the
non-conflicting case we also forgot to delete the file but
in this case we explicitly checkout in the end these files
get deleted during that checkout.
This is fixed by handling incoming deletions explicitly.
Bug: 328841
Change-Id: I7f4c94ab54138e1b2f3fcdf34fb803d68e209ad0
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The automatically generated commit message of a merge should have the
same structure as in C Git for consistency (as per git fmt-merge-msg).
Before this change:
merging refs/heads/a into refs/heads/master
After:
Merge branch 'a'
Plurals, "into" and joining by "," and "and" also work.
Change-Id: I9658ce2817adc90d2df1060e8ac508d7bd0571cb
There were also some compiler warning due to empty catch blocks that
were fixed.
Change-Id: I165bcddcdfacd34f020d1b938a41954916eb106e
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
This mirrors the getByte() API in ObjectId and allows the caller to
modify a single byte, which is useful when updating it as part of a
loop walking through 0x00..0xff inside of a range of objects.
Change-Id: I57fa8420011fe5ed5fc6bfeb26f87a02b3197dab
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Processing git notes requires random access to part of the raw data
of each ObjectId... which isn't easy because ObjectIds are stored
with an internal representation of 5 ints. Expose random access
to the individual data bytes through new methods, avoiding the
need to convert first to a byte[20].
Change-Id: I99e64700b27fc0c95aa14ef8ad46a0e8832d4441
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The JGit merge algorithm or the Merge Command may have problems with handling
deletions always correctly. Therefore one additional test is added to check
this.
Change-Id: Id6aa49136996b29047c340994fe7faba68858e8c
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
JGit merge algorithm behaved differently from C Git when
we had adjacent modifications. If line 9 was modified by
OURS and line 10 by theirs then C Git will return a
conflict while JGit was seeing this as independent
modifications. This change is not only there to achieve
compatibility, but there where also some really wrong
merge results produced by JGit in the area of adjacent
modifications.
Change-Id: I8d77cb59e82638214e45b3cf9ce3a1f1e9b35c70
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Introduced similar helper methods than in AbstractDiffTestCase.
Then the test cases are much smaller and better understandable.
Change-Id: I2beb4db5a93bd8c0c1238d5d3039cbd6719eee90
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When adding a new method near the end of the sequence we want to
show the full method inserted, and not tear the prior method due
to the common trailing curly brace being consumed as part of the
common end region of the sequences.
Bug: 328895
Change-Id: I233bc40445fb5452863f5fb082bc3097433a8da6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This test isn't that useful. The better way to evaluate diff
algorithm performance is to run `jgit debug-diff-algorithms` over
real-world repositories, such as linux-2.6.git. Whenever we modify
an algorithm we should manually verify that its runtime performance
doesn't get any worse than it already is.
Change-Id: I0beed3a5a8a537c958a5a6438a1283f97fa2097a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
HistogramDiff failed on cases where the initial element for the LCS
was actually very common (e.g. has 20 occurrences), and the first
element of the inserted region after the LCS was also common but
had fewer occurrences (e.g. 10), while the LCS also contained a
unique element (1 occurrence).
This happens often in Java source code. The initial element for
the LCS might be the empty line ("\n"), and the inserted but common
element might be "\t/**\n", with the LCS being a large span of
lines that contains unique method declarations. Even though "/**"
occurs less often than the empty line its not a better LCS if the
LCS we already have contains a unique element.
The logic in HistogramDiff would normally have worked fine, except I
tried to optimize scanning of B by making tryLongestCommonSequence
return the end of the region when there are matching elements
found in A. This allows us to skip over the current LCS region,
as it has already been examined, but caused us to fail to identify
an element that had a lower occurrence count within the region.
The solution used here is to trade space-for-time by keeping a
table of A positions to their occurrence counts. This allows the
matching logic to always use the smallest count for this region,
even if the smallest count doesn't appear on the initial element.
The new unit test testEdit_LcsContainsUnique() verifies this new
behavior works as expected.
Bug: 328895
Change-Id: Id170783b891f645b6a8cf6f133c6682b8de40aaf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As described in Bug 328551 there was a bug that the merge algorithm
was not always reporting conflicts when the same line was deleted
and modified. This problem was introduced during commit
0c017188b4 when reported conflicts have
been checked for common pre- and suffixes.
This was fixed here by better determining whether after stripping
off common prefixes and suffixes from a conflicting region there
is still some conflicting part left.
I also added a unit test to test this situation.
Bug: 328551
Change-Id: Iec6c9055d00e5049938484a27ab98dda2577afc4
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When creating a local branch based on another local branch, the
upstream configuration contains "." as origin and the source branch
as "merge". The PullCommand should support this by skipping the
fetch step altogether and use the base branch to merge with.
Change-Id: I260a1771aeeffca5b0161d1494fd63c672ecc2a6
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Don't permit transient worker threads to access the underlying output
stream of a ProgressMonitor, as they might get marked as the stream's
writer thread. Instead proxy update events from the workers back onto
the application's real work thread. This ensures that the stream only
sees a single thread, and its the thread that will remain alive for
the entire life cycle of the operation.
This fixes IOException("Write end dead") during local repository fetch
when threaded delta search is enabled. One of the transient delta
search threads became the designated writer for the pipe, and when it
terminated the reader end thought the writer was dead, even though the
main writer thread was still executing in PackWriter.
Bug: 326557
Change-Id: I01d1b20a3d7be1c0b480c7fb5c9773c161fe5c15
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Implemented the initial version of a cherry-pick command.
A correct error handling is missing (what happens if the
checkout fails, the cherry-pick leads to conflicts etc).
But straightforward cherry-picks works.
Change-Id: I235c0eb3a7a2d5bdfe40400f1deed06f29d746e1
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since the introduction of HashedSequence we no longer need to supply
the RawTextComparator at the time of constructing a RawText. Drop the
definition from the constructor, because it doesn't make sense as part
of our public API.
Change-Id: Iaab34611d60eee4a2036830142b089b2dae81842
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When an empty line was inserted at the beginning of the common end
part of a RawText the comparator incorrectly considered it to be
common, which meant the DiffAlgorithm would later not even have it be
part of the region it examines. This would cause JGit to skip a line
of insertion, which later confused Gerrit Code Review when it tried to
match up the pre and post RawText files for a difference that had this
type of insertion.
Define two new unit tests to check for this insertion of a blank line
condition and correct for it by removing the LF from the common region
when the condition is detected.
Change-Id: I2108570eb2929803b9a56f9fb9c400c758e7156b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It wrongly uses the full name of the branch to remove the
configuration entries but must use the shortened one.
Change-Id: Ie386a128a6c6beccc20bafd15c2e36254c5f560d
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
When creating a branch with CreateBranchCommand.call() without
specifying an explicit startPoint HEAD should be used as startPoint.
There was a bug leading to an NPE in such a case.
Change-Id: Ic0a5dc1f33a0987d66c09996c8012c45785500ff
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
We wanted to wrap all LowLevel JGit excpetions into a
JGitInternalException so that users of this high-level interface
don't have to explicitly catch all of them. This
was forgotten on BranchCreateCommand.call() and I added
it.
Change-Id: Ie140e99574fb004137c66e80fb92eb6c6d0fa5e1
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
HistogramDiff outperforms it for any case where PatienceDiff needs to
fallback to another algorithm. Consequently it's not worth keeping
around, because we would always want a fallback enabled.
Change-Id: I39b99cb1db4b3be74a764dd3d68cd4c9ecd91481
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The need for branching becomes more pressing with pull
support: we need to make sure the upstream configuration entries
are written correctly when creating and renaming branches
(and of course are cleaned up when deleting them).
This adds support for listing, adding, deleting and renaming
branches including the more common options.
Bug: 326938
Change-Id: I00bcc19476e835d6fd78fd188acde64946c1505c
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Application code, including unit tests for storage implementations,
should not extend RevCommit outside of the scope of using it for a
RevWalk. Its a lot of overhead and unlikely to work long-term.
Instead for the one test that matters, use a custom subclass of the
ObjectId type. This lets us measure exactly what we are looking for,
which is that the subclass isn't retained.
A lot of other tests were unnecessarily wrapping an object with a
RevCommit and storing that back into the RefUpdate. This is just
retesting what the earlier no-cache test was doing, and complicated
the test considerably. Drop that code and just rely on the value that
was configured by the helper method.
Change-Id: I5b31813484eaa306e9bc4de9622dd5bd4846b16d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In bug 323571 it is mentioned that if you call
'toURI().toURL().toString()' on a java.io.File you cannot pass
that string to jgit as an URIish. Problem is that the passed
URI looks like 'file:/C:/a/b.txt' and that we where expecting
double slashes after scheme':'. This fix adds support for this
single-slash file URLs.
Bug: 323571
Change-Id: I866a76a4fcd0c3b58e0d26a104fc4564e7ba5999
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This is the minimal implementation of a "Pull" command. It does not
have any parameters besides the generic progress monitor and timeout.
It works on the currently checked-out branch and assumes that the
configuration contains the keys "branch.<branch name>.remote" and
"branch.<branch name>.merge" to determine the remote configuration
for the fetch and the remote branch name for the merge.
Bug: 303404
Change-Id: I7fe09029996d0cfc09a7d8f097b5d6af1488fa93
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
There where quite some bugs regarding wrong URI parsing. In order
to solve them the parsing has to be refactored. We now have
specialized regexps for 'scheme://host/...', scp URIs and local
file names. Now we can detect problems while parsing 'git://host:/abc' which
was previously not possible.
Bug: 315571
Bug: 292897
Bug: 307017
Bug: 323571
Bug: 317388
Change-Id: If72576576ebb6b9d9dc8b7e51ddd87c9909e8b62
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The regular expression which should handle the
user/password part in an URI was potentially
processing too many chars. This led to problems
when user/pwd and port was specified
Change-Id: I87db02494c4b367283e1d00437b1c06d2c8fdd28
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
URIs for the git protocol have to have a hostname.
(see http://www.kernel.org/pub/software/scm/git/docs
/git-clone.html#_git_urls_a_id_urls_a) Some tests tested
URIs like git:/abc.git which is not allowed. Fixed this.
Change-Id: Ia3b8b681ad6592f03b090a874a6e91068a8301fe
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Projects like org.eclipse.mdt contain large XML files about 6 MiB
in size. So does the Android project platform/frameworks/base.
Doing a clone of either project with JGit takes forever to checkout
the files into the working directory, because delta decompression
tends to be very expensive as we need to constantly reposition the
base stream for each copy instruction. This can be made worse by
a very bad ordering of offsets, possibly due to an XML editor that
doesn't preserve the order of elements in the file very well.
Increasing the threshold to the same limit PackWriter uses when
doing delta compression (50 MiB) permits a default configured
JGit to decompress these XML file objects using the faster
random-access arrays, rather than re-seeking through an inflate
stream, significantly reducing checkout time after a clone.
Since this new limit may be dangerously close to the JVM maximum
heap size, every allocation attempt is now wrapped in a try/catch
so that JGit can degrade by switching to the large object stream
mode when the allocation is refused. It will run slower, but the
operation will still complete.
The large stream mode will run very well for big objects that aren't
delta compressed, and is acceptable for delta compressed objects that
are using only forward referencing copy instructions. Copies using
prior offsets are still going to be horrible, and there is nothing
we can do about it except increase core.streamFileThreshold.
We might in the future want to consider changing the way the delta
generators work in JGit and native C Git to avoid prior offsets once
an object reaches a certain size, even if that causes the delta
instruction stream to be slightly larger. Unfortunately native
C Git won't want to do that until its also able to stream objects
rather than malloc them as contiguous blocks.
Change-Id: Ief7a3896afce15073e80d3691bed90c6a3897307
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
HistogramDiff is an alternative implementation of patience diff,
performing a search over all matching locations and picking the
longest common subsequence that has the lowest occurrence count.
If there are unique common elements, its behavior is identical to
that of patience diff.
Actual performance on real-world source files usually beats
MyersDiff, sometimes by a factor of 3, especially for complex
comparators that ignore whitespace.
Change-Id: I1806cd708087e36d144fb824a0e5ab7cdd579d73
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Each algorithm should produce a particular number of results
given one of the standard inputs used during the performance
tests. To help ensure those tests are accurate, assert that
the edit list length is correct.
Change-Id: I292f8fde0cec6a60a75ce09e70814a00ca47cb99
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because PatienceDiff works by looking for common unique lines within
the region, the DiffTestDataGenerator needs to be modified to produce
a unique character for each region. If we don't give PatienceDiff
a few unique points, it will just offer back a single REPLACE edit
that covers the entire files, and this doesn't tell us very much.
Change-Id: I5129faea1e763c74739118ca20d86bd62e0deaef
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For certain tiny input sequences, every DiffAlgorithm should produce
exactly the same results, as there should be no ambiguity. Package
these up in an abstract TestCase that algorithms can extend from in
order to perform basic validation of their implementation.
Since these tests are more complete than what we used to have for
the MyersDiff algorithm, throw away Johannes' tests and only use
this new package.
Change-Id: I9a044330887c849ad4c78aa5c7aa04c783c10252
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a faster exact match based form that tries to improve
performance for the common case of the header and trailer of
a text file not changing at all. After this fast path we use
the slower path based on the super class' using equals() to
allow for whitespace ignore modes to still work.
Some simple performance testing showed a major improvement over the
older implementation for a common edit we see in JGit. The test
compared blob 29a89bc and 372a978, which is the ObjectDirectory.java
file difference in commit 41dd9ed1c0.
The two text files are approximately 22 KiB in size.
DEFAULT old 203900 ns
DEFAULT new 100400 ns
This new version is 2x faster for the DEFAULT comparator, which does
not treat space specially. This is because we can now examine a
larger swath of text with fewer instructions per byte compared. The
older algorithm had to stop at each line break and recompute how to
examine the next line, while the new algorithm only stops when the
first difference is found.
WS_IGNORE_ALL old 298500 ns
WS_IGNORE_ALL new 63300 ns
Its 4.7x faster for the whitespace ignore comparator, as the common
header and footer do not have a whitespace difference. Avoiding the
special case handling for whitespace on each byte considered saves a
lot of time.
Since most edits to source code (and other text like files) appears in
the interior of the file, fast elimination of common header/footer
means faster diff throughput. In the less common case of an actual
header or footer edit, the common header/footer elimination is stopped
rather quickly either way, so there is very little downside to the
optimiation applied here.
Change-Id: I1d501b4c3ff80ed086b20bf12faf51ae62167db7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Adds API for performing git fetch operations.
Change-Id: Idd95664fd4e3bca03211e4ffda3e354849f92a35
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Method test006_readCaseInsensitive in TestConfig already does the
same thing, and doesn't require an OS specific test for the value being
asserted.
This is additionally a fast fix for the failing JUnit test after
change 3fe5276.
Change-Id: I96d2794dbc7db55bdd0fbfcf675aabb15cc8419f
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
* stable-0.9:
Qualify post-0.9.3 builds
JGit 0.9.3
clone: Correct formatting of init message
Fix cloning of repositories with big objects
Qualify post-0.9.1 builds
JGit 0.9.1
Fix PlotCommitList to set lanes on child-less commits
In PlotCommitList.enter() commits are positioned on lanes for visual
presentation. This implementation was buggy: commits without
children (often the starting points for the RevWalk) are not positioned
on separate lanes.
The problem was that when handling commits with multiple children
(that's where branches fork out) it was not handled that some of the
children may not have been positioned on a lane yet. I fixed that and
added a number of tests which specifically test the layout of commits
on lanes.
Bug: 300282
Bug: 320263
Change-Id: I267b97ecccb5251cec54cec90207e075ab50503e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This makes it easier to parametrize DiffFormatter with a different
implementation, as we later plan to add PatienceDiff to JGit.
Change-Id: Id35ef478d5fa20fe10a1ba297f9436fd7adde9ce
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git allows remotes to be relative paths, but the regex
validating urls wouldn't accept anything starting with "..".
Other functionality works fine with these paths.
Bug: 311300
Change-Id: Ib74de0450a1c602b22884e19d994ce2f52634c77
The core.autocrlf variable can take on three values: false, true,
and input. Parsing it as a boolean is wrong, we instead need to
parse a tri-state enumeration.
Add support for parsing and setting enum values from Java from and
to the text based configuration file, and use that to handle the
autocrlf variable.
Bug: 301775
Change-Id: I81b9e33087a33d2ef2eac89ba93b9e83b7ecc223
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of making the sequence itself responsible for the equivalence
function, use an external function that is supplied by the caller.
This cleans up the code because we now say cmp.equals(a, ai, b, bi)
instead of a.equals(ai, b, bi).
This refactoring also removes the odd concept of creating different
types of sequences to have different behaviors for whitespace
ignoring. Instead DiffComparator now supports singleton functions
that apply a particular equivalence algorithm to a type of sequence.
Change-Id: I559f494d81cdc6f06bfb4208f60780c0ae251df9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When checkReferencedIsReachable is set in ReceivePack we are trying
to prove that the push client is permitted to access an object that
it did not send to us, but that the received objects link to either
via a link inside of an object (e.g. commit parent pointer or tree
member) or by a delta base reference.
To do this check we are making a list of every potential delta base,
and then ensuring that every delta base used appears on this list.
If a delta base does not appear on this list, we abort with an error,
letting the client know we are missing a particular object.
Preventing spurious errors about missing delta base objects requires
us to use the exact same list of potential delta bases as the remote
push client used. This means we must use TOPO ordering, and we
need to enable BOUNDARY sorting so that ObjectWalk will correctly
include any trees found during the enumeration back to the common
merge base between the interesting and uninteresting heads.
To ensure JGit's own push client matches this same potential delta
base list, we need to undo 60aae90d4d ("Disable topological
sorting in PackWriter") and switch back to using the conventional
TOPO ordering for commits in a pack file. This ensures that our
own push client will use the same potential base object list as
checkReferencedIsReachable uses on the receiving side.
Change-Id: I14d0a326deb62a43f987b375cfe519711031e172
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the copy instruction was larger than the input buffer given to us,
we copied the wrong part of the base stream during the next read().
This occurred on really big binary files where a copy instruction
of 64k wasn't unreasonable, but the caller's buffer was only 8192
bytes long. We copied the first 8192 bytes correctly, but then
reseeked the base stream back to the start of the copy region on
the second read of 8192 bytes. Instead of a sequence like ABCD
being read into the caller, we read AAAA.
Change-Id: I240a3f722a3eda1ce8ef5db93b380e3bceb1e201
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Exposing isEmpty, getLengthA, getLengthB make it easier to examine
the state of an edit and work with it from higher level code.
The before and after cut routines make it easy to split an edit
that contains another edit, such as to decompose a REPLACE that
contains a common sequence within it.
Change-Id: Id63d6476a7a6b23acb7ab237d414a0a1a7200290
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We shouldn't escape non-special ASCII characters such as '@' or '~'.
These are valid in a path name on POSIX systems, and may appear as
part of a path in a GNU or Git style patch script. Escaping them
into octal just obfuscates the user's intent, with no gain.
When parsing an escaped octal sequence, we must parse no more
than 3 digits. That is, "\1002" is actually "@2", not the Unicode
character \u0202.
Change-Id: I3a849a0d318e69b654f03fd559f5d7f99dd63e5c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we get an exception while indexing the incoming pack, its likely
a stream corruption. We already report an error to the client, but
we eat the stack trace, which makes debugging issues related to a
bug inside of JGit nearly impossible. Rethrow it under a new type
UnpackException, so embedding servers or applications can catch the
error and provide it to a human who might be able to forward such
traces onto a JGit developer for evaluation.
Change-Id: Icad41148bbc0c76f284c7033a195a6b51911beab
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Applications just want a quick way to configure our diff
implementation, and then just want to use it without a lot of fuss.
Move all of the rename detection logic and path following logic
out of our pgm package and into DiffFormatter itself, making it
much easier for a GUI to take advantage of the features without
duplicating a lot of code.
Change-Id: I4b54e987bb6dc804fb270cbc495fe4cae26c7b0e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Create a new 'org.eclipse.jgit.api.errors' package to contain
exceptions related to using the Git porcelain API.
Change-Id: Iac1781bd74fbd520dffac9d347616c3334994470
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
When adding or deleting a file, we shouldn't ever prefix /dev/null
with the a/ or b/ prefixes. Doing so is a mistake and confuses a
patch parser which handles /dev/null magically, while a/dev/null is
a file called null in the dev directory of the project.
Also when adding or deleting the "diff --git" line has the "real"
path on both sides, so we should see the following when adding the
file called foo:
diff --git a/foo b/foo
--- /dev/null
+++ b/foo
The --- and +++ lines do not appear in a pure rename or copy delta,
C Git diff seems to omit these, so we now omit them as well. We also
omit the index line when the ObjectIds are exactly equal.
Change-Id: Ic46892dea935ee8bdee29088aab96307d7ec6d3d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Currently, if a branch is created that has special chars ('#' in the bug),
Config will surround the subsection name with double quotes during
it's toText method which will result in an invalid file after saving the
Config.
Bug: 318249
Change-Id: I0a642f52def42d936869e4aaaeb6999567901001
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Extended flags are processed and available via DirCacheEntry's
new isSkipWorkTree() and isIntentToAdd() methods. "resolve-undo"
information is completely ignored since its an optional extension.
Change-Id: Ie6e9c6784c9f265ca3c013c6dc0e6bd29d3b7233
The merge algorithm was reporting conflicts which where to big.
Example: The common base was "ABC", the "ours" version contained
"AB1C" (the addition of "1" after pos 2) and the "theirs" version also
contained "AB1C". We have two potentially conflicting edits in the
same region which happen to bring in exactly the same content. This
should not be a conflict - but was previously reported as
"AB<<<1===1>>>C".
This is fixed by checking every conflicting chunk whether the
conflicting regions have a common prefix or suffix and by removing
this regions from the conflict.
Change-Id: I4dc169b8ef7a66ec6b307e9a956feef906c9e15e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This adds the first merge strategy to JGit which does real
content-merges if necessary. The new merge strategy "resolve" takes as
input three commits: a common base, ours and theirs. It will simply takeover
changes on files which are only touched in ours or theirs. For files
touched in ours and theirs it will try to merge the two contents
knowing taking into account the specified common base.
Rename detection has not been introduced for now.
Change-Id: I49a5ebcdcf4f540f606092c0f1dc66c965dc66ba
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
On Mac OS X MyerDiffPerformanceTest was failing since during the
first few tests the JIT compiler is running in parallel slowing down
the tests. When setting the JVM option -Xbatch forcing the JIT to do
its work prior to running the code this effect can be avoided. Instead
we chose to run some tests without recording prior to the recorded
tests since relying on -X JVM parameters isn't portable across JVMs.
Use 10k * powers of 2 as sample size instead of odd numbers used
before and also improve formatting of performance readings.
Bug: 323766
Change-Id: I9a46d73f81a785f399d3cf5a90c8c0516526e048
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Use 3 different types of LargeObjectException for the 3 major ways
that we can fail to load an object. For each of these use a unique
string translation which describes the root cause better than just
the ObjectId.name() does.
Change-Id: I810c98d5691b74af9fc6cbd46fc9879e35a7bdca
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add an explicit test case to check that we don't
overwrite dirty files in case Head & Index are
equal.
Change-Id: I6266d0a449e55369d2d0a048694dca5565c5fcf3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This reverts commit db4c516f67 since
it breaks compatibility with Eclipse 3.5 which can no longer import
the projects
Bug: 323390
Change-Id: I3cc91364a6747cfcb4c611a9be5258f81562f726
A tag command is added to the Git porcelain API. Tests were
also added to stress test the tag command.
Change-Id: Iab282a918eb51b0e9c55f628a3396ff01c9eb9eb
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implementation of a checkout (or 'git read-tree') operation which
works together with DirCache. This implementation does similar things
as WorkDirCheckout which main problem is that it works with deprecated
GitIndex. Since GitIndex doesn't support multiple stages of a file
which is required in merge situations this new implementation is
required to enable merge support.
Change-Id: I13f0f23ad60d98e5168118a7e7e7308e066ecf9c
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Otherwise PackFileTest.testDelta_LargeObjectChain() reproducibly
fails with OutOfMemoryError on Mac OS X 10.6.4.
Change-Id: I6a55ff9ba181102606a0d99ffd52392a1615a422
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Updates the project level settings to run the formatter
on save on only on the edited lines.
Change-Id: I26dd69d0c95e6d73f9fdf7031f3c1dbf3becbb79
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
We should use JUnit4 for tests. This patch updates
the MANIFEST.MF and respective launch configurations.
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
PersonIdent should be parsable for an invalid commit which
contains multiple authors, like "A <a@a.org>, B <b@b.org>".
PersonIdent(String) constructor now delegates to
RawParseUtils.parsePersonIdent().
Change-Id: Ie9798d36d9ecfcc0094ca795f5a44b003136eaf7
Because we are using the large stream size, we have to be
above the STREAM_THRESHOLD constant, which I just increased.
Change-Id: I6f10ec8558d9f751d4b547fcae05af94f1c8866b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We can now resolve expressions that reference a path within a
commit, designating a specific revision of a specific tree or
file in the project.
Change-Id: Ie6a8be629d264d72209db894bd680c5900035cc0
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We now match on the -gABBREV style output created by git describe
when its describing a non-tagged commit, and resolve that back to
the full ObjectId using the abbreviation resolution feature that
we already support.
Change-Id: Ib3033f9483d9e1c66c8bb721ff48d4485bcdaef1
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Calling it by the old numerical numbering system makes it really
hard to find the test that tests Repository.resolve(String).
Change-Id: I92d0ecbc8d66ce21bfed08888eeedf1300ffa594
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its wrong to return null if we are resolving an abbreviation and we
have proven it matches more than one object. We know how to resolve
it if we had more nybbles, as there are two or more objects with the
same prefix. Declare that to the caller quite clearly by giving them
an AmbiguousObjectException.
Change-Id: I01bb48e587e6d001b93da8575c2c81af3eda5a32
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some algorithms are coded in a way that requires us to provide them
the entire object contents as a contiguous byte array. The parsers
in RevCommit and RevTag, or our RawText objects are really good
examples of these.
Instead of duplicating this logic everywhere, lets put it into the
base ObjectLoader type. That way the caller only needs to give us
their upper size bound, and we'll do the rest of the heavy work to
figure out if the object still fits within that bound, and get them
an array that has the complete contents.
Change-Id: Id95a7f79d2b97e39f6949370ccca2f2c9cfb1a0f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
If we can't resolve an abbreviation, it might be because there is
a new pack file we haven't picked up yet. Try scanning the packs
again and recheck each pack if there were differences from the last
scan we did.
Because of this, we don't have to open a pack during the test where
we generate a pack on the fly. We'll miss on the first loop during
which the PackList is the NO_PACKS magic initialization constant,
and pick up the newly created index during this retry logic.
Change-Id: I7b97efb29a695ee60c90818be380f7ea23ad13a3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ObjectReader implementations are now responsible for creating the
unique abbreviation of an ObjectId, or for resolving an abbreviation
back to its full form. In this latter case the reader can offer up
multiple candidates to the caller, who may be able to disambiguate
them based on context.
Repository.resolve() doesn't take multiple candidates into account
right now, but it could in the future by looking for a remaining
^0 or ^{commit} suffix and take an expansion if there is only one
commit that matches the input abbreviation. It could also use
the distance from an annotated tag to resolve "tag-NNN-gcommit"
style strings that are often output by `git describe`.
Change-Id: Icd3250adc8177ae05278b858933afdca0cbbdb56
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ObjectWriter is a deprecated API that people shouldn't be using.
So get rid of it in favor of the ObjectInserter API.
Change-Id: I6218bcb26b6b9ffb64e3e470dba5dca2e0a62fd4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These objects should be responsible for their own formatting,
rather than delegating it to some obtuse type called ObjectInserter.
While we are at it, simplify the way we insert these into a database.
Passing in the type and calling format in application code turned
out to be a huge mistake in terms of ease-of-use of the insert API.
Change-Id: Id5bb95ee56aa2a002243e9b7853b84ec8df1d7bf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since these types no longer support reading, calling them a Builder
is a better description of what they do. They help the caller to
build a commit or a tag object.
Change-Id: I53cae5a800a66ea1721b0fe5e702599df31da05d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
WorkingTreeIterator now optionally performs CRLF to LF conversion for
text files. A basic framework is left in place to support enabling
(or disabling) this feature based on gitattributes, and also to
support the more generic smudge/clean filter system. As there is
no gitattribute support yet in JGit this is left unimplemented,
but the mightNeedCleaning(), isBinary() and filterClean() methods
will provide reasonable places to plug that into in the future.
[sp: All bugs inside of WorkingTreeIterator are my fault, I wrote
most of it while cherry-picking this patch and building it on
top of Marc's original work.]
CQ: 4419
Bug: 301775
Change-Id: I0ca35cfbfe3f503729cbfc1d5034ad4abcd1097e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Callers might have a canonical tag encoding on hand that they
wish to convert into a clean structure for presentation purposes,
and the object may not be available in a repository. (E.g. maybe
its a "draft" tag being written in an editor.)
Change-Id: I387a462afb70754aa7ee20891e6c0262438fdf32
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Callers might have a canonical commit encoding on hand that they
wish to convert into a clean structure for presentation purposes,
and the object may not be available in a repository. (E.g. maybe
its a "draft" commit being written in an editor.)
Change-Id: I21759cff337cbbb34dbdde91aec5aa4448a1ef37
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tag class now only supports the creation of an annotated tag
object. To read an annotated tag, applictions should use RevTag.
This permits us to have exactly one implementation, and RevTag's
is faster and more bug-free.
Change-Id: Ib573f7e15f36855112815269385c21dea532e2cf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Commit class now only supports the creation of a commit object.
To read a commit, applictions should use RevCommit. This permits
us to have exactly one implementation, and RevCommit's is faster
and more bug-free.
Change-Id: Ib573f7e15f36855112815269385c21dea532e2cf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ReadTreeTests relied on Repository.getIndex() which on
platforms which coarse FileSystemTimers failed to detect
index modifications. By explicitly reloading and writing
the index this problem is solved.
Change-Id: I0a98babfc2068a3b6b7d2257834988e1154f5b26
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When RevObject overrode equals() to provide only reference equality
we used to need to convert a RevObject into an ObjectId by copy()
just to use standard Java tools like JUnit assertEquals(), or to
use contains() or get() on standard java.util collection types.
Now that we have removed this override and made ObjectId's equals()
final (preventing any of this mess in the future), some copy()
calls are unnecessary. Anytime the value is being used as an input
to a lookup routine, or to an equals, we can avoid the copy().
However we still want to use copy() anytime we are given an ObjectId
that may exist long-term, where we don't want the high cost of the
additional storage from a RevCommit extension. So we can't remove
all uses of copy(), just some of them.
Change-Id: Ief275dace435c0ddfa362ac8e5d93558bc7e9fc3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Configuration change events were not being triggered, now they are
forwarded from the FileConfig up to the Repository's listeners.
Change-Id: Ida94a59f5a2b7fa8ae0126e33c13343275483ee5
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There was a duplicated getter and setter for tagger in Tag.
There's no needed to have two getters and setters that represent
the same things. The appropriate tests were updated also.
Change-Id: If46dc00c4c0f31ea4234c6d3bda3c03e6ebbafac
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
indexState() encodes the complete state of the index
into one readable String. This helps to write tests
against the index. indexState() is enhanced to optionally
also contain the content of the files in the index.
Change-Id: Ie988f93768d864f4cbd55809a786bd5759fc24a5
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Chris Aniszczyk