Introduced similar helper methods than in AbstractDiffTestCase.
Then the test cases are much smaller and better understandable.
Change-Id: I2beb4db5a93bd8c0c1238d5d3039cbd6719eee90
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When adding a new method near the end of the sequence we want to
show the full method inserted, and not tear the prior method due
to the common trailing curly brace being consumed as part of the
common end region of the sequences.
Bug: 328895
Change-Id: I233bc40445fb5452863f5fb082bc3097433a8da6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This test isn't that useful. The better way to evaluate diff
algorithm performance is to run `jgit debug-diff-algorithms` over
real-world repositories, such as linux-2.6.git. Whenever we modify
an algorithm we should manually verify that its runtime performance
doesn't get any worse than it already is.
Change-Id: I0beed3a5a8a537c958a5a6438a1283f97fa2097a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
HistogramDiff failed on cases where the initial element for the LCS
was actually very common (e.g. has 20 occurrences), and the first
element of the inserted region after the LCS was also common but
had fewer occurrences (e.g. 10), while the LCS also contained a
unique element (1 occurrence).
This happens often in Java source code. The initial element for
the LCS might be the empty line ("\n"), and the inserted but common
element might be "\t/**\n", with the LCS being a large span of
lines that contains unique method declarations. Even though "/**"
occurs less often than the empty line its not a better LCS if the
LCS we already have contains a unique element.
The logic in HistogramDiff would normally have worked fine, except I
tried to optimize scanning of B by making tryLongestCommonSequence
return the end of the region when there are matching elements
found in A. This allows us to skip over the current LCS region,
as it has already been examined, but caused us to fail to identify
an element that had a lower occurrence count within the region.
The solution used here is to trade space-for-time by keeping a
table of A positions to their occurrence counts. This allows the
matching logic to always use the smallest count for this region,
even if the smallest count doesn't appear on the initial element.
The new unit test testEdit_LcsContainsUnique() verifies this new
behavior works as expected.
Bug: 328895
Change-Id: Id170783b891f645b6a8cf6f133c6682b8de40aaf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As described in Bug 328551 there was a bug that the merge algorithm
was not always reporting conflicts when the same line was deleted
and modified. This problem was introduced during commit
0c017188b4 when reported conflicts have
been checked for common pre- and suffixes.
This was fixed here by better determining whether after stripping
off common prefixes and suffixes from a conflicting region there
is still some conflicting part left.
I also added a unit test to test this situation.
Bug: 328551
Change-Id: Iec6c9055d00e5049938484a27ab98dda2577afc4
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When creating a local branch based on another local branch, the
upstream configuration contains "." as origin and the source branch
as "merge". The PullCommand should support this by skipping the
fetch step altogether and use the base branch to merge with.
Change-Id: I260a1771aeeffca5b0161d1494fd63c672ecc2a6
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Don't permit transient worker threads to access the underlying output
stream of a ProgressMonitor, as they might get marked as the stream's
writer thread. Instead proxy update events from the workers back onto
the application's real work thread. This ensures that the stream only
sees a single thread, and its the thread that will remain alive for
the entire life cycle of the operation.
This fixes IOException("Write end dead") during local repository fetch
when threaded delta search is enabled. One of the transient delta
search threads became the designated writer for the pipe, and when it
terminated the reader end thought the writer was dead, even though the
main writer thread was still executing in PackWriter.
Bug: 326557
Change-Id: I01d1b20a3d7be1c0b480c7fb5c9773c161fe5c15
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Implemented the initial version of a cherry-pick command.
A correct error handling is missing (what happens if the
checkout fails, the cherry-pick leads to conflicts etc).
But straightforward cherry-picks works.
Change-Id: I235c0eb3a7a2d5bdfe40400f1deed06f29d746e1
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since the introduction of HashedSequence we no longer need to supply
the RawTextComparator at the time of constructing a RawText. Drop the
definition from the constructor, because it doesn't make sense as part
of our public API.
Change-Id: Iaab34611d60eee4a2036830142b089b2dae81842
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When an empty line was inserted at the beginning of the common end
part of a RawText the comparator incorrectly considered it to be
common, which meant the DiffAlgorithm would later not even have it be
part of the region it examines. This would cause JGit to skip a line
of insertion, which later confused Gerrit Code Review when it tried to
match up the pre and post RawText files for a difference that had this
type of insertion.
Define two new unit tests to check for this insertion of a blank line
condition and correct for it by removing the LF from the common region
when the condition is detected.
Change-Id: I2108570eb2929803b9a56f9fb9c400c758e7156b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It wrongly uses the full name of the branch to remove the
configuration entries but must use the shortened one.
Change-Id: Ie386a128a6c6beccc20bafd15c2e36254c5f560d
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
When creating a branch with CreateBranchCommand.call() without
specifying an explicit startPoint HEAD should be used as startPoint.
There was a bug leading to an NPE in such a case.
Change-Id: Ic0a5dc1f33a0987d66c09996c8012c45785500ff
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
We wanted to wrap all LowLevel JGit excpetions into a
JGitInternalException so that users of this high-level interface
don't have to explicitly catch all of them. This
was forgotten on BranchCreateCommand.call() and I added
it.
Change-Id: Ie140e99574fb004137c66e80fb92eb6c6d0fa5e1
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
HistogramDiff outperforms it for any case where PatienceDiff needs to
fallback to another algorithm. Consequently it's not worth keeping
around, because we would always want a fallback enabled.
Change-Id: I39b99cb1db4b3be74a764dd3d68cd4c9ecd91481
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The need for branching becomes more pressing with pull
support: we need to make sure the upstream configuration entries
are written correctly when creating and renaming branches
(and of course are cleaned up when deleting them).
This adds support for listing, adding, deleting and renaming
branches including the more common options.
Bug: 326938
Change-Id: I00bcc19476e835d6fd78fd188acde64946c1505c
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Application code, including unit tests for storage implementations,
should not extend RevCommit outside of the scope of using it for a
RevWalk. Its a lot of overhead and unlikely to work long-term.
Instead for the one test that matters, use a custom subclass of the
ObjectId type. This lets us measure exactly what we are looking for,
which is that the subclass isn't retained.
A lot of other tests were unnecessarily wrapping an object with a
RevCommit and storing that back into the RefUpdate. This is just
retesting what the earlier no-cache test was doing, and complicated
the test considerably. Drop that code and just rely on the value that
was configured by the helper method.
Change-Id: I5b31813484eaa306e9bc4de9622dd5bd4846b16d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In bug 323571 it is mentioned that if you call
'toURI().toURL().toString()' on a java.io.File you cannot pass
that string to jgit as an URIish. Problem is that the passed
URI looks like 'file:/C:/a/b.txt' and that we where expecting
double slashes after scheme':'. This fix adds support for this
single-slash file URLs.
Bug: 323571
Change-Id: I866a76a4fcd0c3b58e0d26a104fc4564e7ba5999
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This is the minimal implementation of a "Pull" command. It does not
have any parameters besides the generic progress monitor and timeout.
It works on the currently checked-out branch and assumes that the
configuration contains the keys "branch.<branch name>.remote" and
"branch.<branch name>.merge" to determine the remote configuration
for the fetch and the remote branch name for the merge.
Bug: 303404
Change-Id: I7fe09029996d0cfc09a7d8f097b5d6af1488fa93
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
There where quite some bugs regarding wrong URI parsing. In order
to solve them the parsing has to be refactored. We now have
specialized regexps for 'scheme://host/...', scp URIs and local
file names. Now we can detect problems while parsing 'git://host:/abc' which
was previously not possible.
Bug: 315571
Bug: 292897
Bug: 307017
Bug: 323571
Bug: 317388
Change-Id: If72576576ebb6b9d9dc8b7e51ddd87c9909e8b62
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The regular expression which should handle the
user/password part in an URI was potentially
processing too many chars. This led to problems
when user/pwd and port was specified
Change-Id: I87db02494c4b367283e1d00437b1c06d2c8fdd28
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
URIs for the git protocol have to have a hostname.
(see http://www.kernel.org/pub/software/scm/git/docs
/git-clone.html#_git_urls_a_id_urls_a) Some tests tested
URIs like git:/abc.git which is not allowed. Fixed this.
Change-Id: Ia3b8b681ad6592f03b090a874a6e91068a8301fe
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Projects like org.eclipse.mdt contain large XML files about 6 MiB
in size. So does the Android project platform/frameworks/base.
Doing a clone of either project with JGit takes forever to checkout
the files into the working directory, because delta decompression
tends to be very expensive as we need to constantly reposition the
base stream for each copy instruction. This can be made worse by
a very bad ordering of offsets, possibly due to an XML editor that
doesn't preserve the order of elements in the file very well.
Increasing the threshold to the same limit PackWriter uses when
doing delta compression (50 MiB) permits a default configured
JGit to decompress these XML file objects using the faster
random-access arrays, rather than re-seeking through an inflate
stream, significantly reducing checkout time after a clone.
Since this new limit may be dangerously close to the JVM maximum
heap size, every allocation attempt is now wrapped in a try/catch
so that JGit can degrade by switching to the large object stream
mode when the allocation is refused. It will run slower, but the
operation will still complete.
The large stream mode will run very well for big objects that aren't
delta compressed, and is acceptable for delta compressed objects that
are using only forward referencing copy instructions. Copies using
prior offsets are still going to be horrible, and there is nothing
we can do about it except increase core.streamFileThreshold.
We might in the future want to consider changing the way the delta
generators work in JGit and native C Git to avoid prior offsets once
an object reaches a certain size, even if that causes the delta
instruction stream to be slightly larger. Unfortunately native
C Git won't want to do that until its also able to stream objects
rather than malloc them as contiguous blocks.
Change-Id: Ief7a3896afce15073e80d3691bed90c6a3897307
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
HistogramDiff is an alternative implementation of patience diff,
performing a search over all matching locations and picking the
longest common subsequence that has the lowest occurrence count.
If there are unique common elements, its behavior is identical to
that of patience diff.
Actual performance on real-world source files usually beats
MyersDiff, sometimes by a factor of 3, especially for complex
comparators that ignore whitespace.
Change-Id: I1806cd708087e36d144fb824a0e5ab7cdd579d73
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Each algorithm should produce a particular number of results
given one of the standard inputs used during the performance
tests. To help ensure those tests are accurate, assert that
the edit list length is correct.
Change-Id: I292f8fde0cec6a60a75ce09e70814a00ca47cb99
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because PatienceDiff works by looking for common unique lines within
the region, the DiffTestDataGenerator needs to be modified to produce
a unique character for each region. If we don't give PatienceDiff
a few unique points, it will just offer back a single REPLACE edit
that covers the entire files, and this doesn't tell us very much.
Change-Id: I5129faea1e763c74739118ca20d86bd62e0deaef
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For certain tiny input sequences, every DiffAlgorithm should produce
exactly the same results, as there should be no ambiguity. Package
these up in an abstract TestCase that algorithms can extend from in
order to perform basic validation of their implementation.
Since these tests are more complete than what we used to have for
the MyersDiff algorithm, throw away Johannes' tests and only use
this new package.
Change-Id: I9a044330887c849ad4c78aa5c7aa04c783c10252
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a faster exact match based form that tries to improve
performance for the common case of the header and trailer of
a text file not changing at all. After this fast path we use
the slower path based on the super class' using equals() to
allow for whitespace ignore modes to still work.
Some simple performance testing showed a major improvement over the
older implementation for a common edit we see in JGit. The test
compared blob 29a89bc and 372a978, which is the ObjectDirectory.java
file difference in commit 41dd9ed1c0.
The two text files are approximately 22 KiB in size.
DEFAULT old 203900 ns
DEFAULT new 100400 ns
This new version is 2x faster for the DEFAULT comparator, which does
not treat space specially. This is because we can now examine a
larger swath of text with fewer instructions per byte compared. The
older algorithm had to stop at each line break and recompute how to
examine the next line, while the new algorithm only stops when the
first difference is found.
WS_IGNORE_ALL old 298500 ns
WS_IGNORE_ALL new 63300 ns
Its 4.7x faster for the whitespace ignore comparator, as the common
header and footer do not have a whitespace difference. Avoiding the
special case handling for whitespace on each byte considered saves a
lot of time.
Since most edits to source code (and other text like files) appears in
the interior of the file, fast elimination of common header/footer
means faster diff throughput. In the less common case of an actual
header or footer edit, the common header/footer elimination is stopped
rather quickly either way, so there is very little downside to the
optimiation applied here.
Change-Id: I1d501b4c3ff80ed086b20bf12faf51ae62167db7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Adds API for performing git fetch operations.
Change-Id: Idd95664fd4e3bca03211e4ffda3e354849f92a35
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Method test006_readCaseInsensitive in TestConfig already does the
same thing, and doesn't require an OS specific test for the value being
asserted.
This is additionally a fast fix for the failing JUnit test after
change 3fe5276.
Change-Id: I96d2794dbc7db55bdd0fbfcf675aabb15cc8419f
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
* stable-0.9:
Qualify post-0.9.3 builds
JGit 0.9.3
clone: Correct formatting of init message
Fix cloning of repositories with big objects
Qualify post-0.9.1 builds
JGit 0.9.1
Fix PlotCommitList to set lanes on child-less commits
In PlotCommitList.enter() commits are positioned on lanes for visual
presentation. This implementation was buggy: commits without
children (often the starting points for the RevWalk) are not positioned
on separate lanes.
The problem was that when handling commits with multiple children
(that's where branches fork out) it was not handled that some of the
children may not have been positioned on a lane yet. I fixed that and
added a number of tests which specifically test the layout of commits
on lanes.
Bug: 300282
Bug: 320263
Change-Id: I267b97ecccb5251cec54cec90207e075ab50503e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This makes it easier to parametrize DiffFormatter with a different
implementation, as we later plan to add PatienceDiff to JGit.
Change-Id: Id35ef478d5fa20fe10a1ba297f9436fd7adde9ce
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git allows remotes to be relative paths, but the regex
validating urls wouldn't accept anything starting with "..".
Other functionality works fine with these paths.
Bug: 311300
Change-Id: Ib74de0450a1c602b22884e19d994ce2f52634c77
The core.autocrlf variable can take on three values: false, true,
and input. Parsing it as a boolean is wrong, we instead need to
parse a tri-state enumeration.
Add support for parsing and setting enum values from Java from and
to the text based configuration file, and use that to handle the
autocrlf variable.
Bug: 301775
Change-Id: I81b9e33087a33d2ef2eac89ba93b9e83b7ecc223
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of making the sequence itself responsible for the equivalence
function, use an external function that is supplied by the caller.
This cleans up the code because we now say cmp.equals(a, ai, b, bi)
instead of a.equals(ai, b, bi).
This refactoring also removes the odd concept of creating different
types of sequences to have different behaviors for whitespace
ignoring. Instead DiffComparator now supports singleton functions
that apply a particular equivalence algorithm to a type of sequence.
Change-Id: I559f494d81cdc6f06bfb4208f60780c0ae251df9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When checkReferencedIsReachable is set in ReceivePack we are trying
to prove that the push client is permitted to access an object that
it did not send to us, but that the received objects link to either
via a link inside of an object (e.g. commit parent pointer or tree
member) or by a delta base reference.
To do this check we are making a list of every potential delta base,
and then ensuring that every delta base used appears on this list.
If a delta base does not appear on this list, we abort with an error,
letting the client know we are missing a particular object.
Preventing spurious errors about missing delta base objects requires
us to use the exact same list of potential delta bases as the remote
push client used. This means we must use TOPO ordering, and we
need to enable BOUNDARY sorting so that ObjectWalk will correctly
include any trees found during the enumeration back to the common
merge base between the interesting and uninteresting heads.
To ensure JGit's own push client matches this same potential delta
base list, we need to undo 60aae90d4d ("Disable topological
sorting in PackWriter") and switch back to using the conventional
TOPO ordering for commits in a pack file. This ensures that our
own push client will use the same potential base object list as
checkReferencedIsReachable uses on the receiving side.
Change-Id: I14d0a326deb62a43f987b375cfe519711031e172
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the copy instruction was larger than the input buffer given to us,
we copied the wrong part of the base stream during the next read().
This occurred on really big binary files where a copy instruction
of 64k wasn't unreasonable, but the caller's buffer was only 8192
bytes long. We copied the first 8192 bytes correctly, but then
reseeked the base stream back to the start of the copy region on
the second read of 8192 bytes. Instead of a sequence like ABCD
being read into the caller, we read AAAA.
Change-Id: I240a3f722a3eda1ce8ef5db93b380e3bceb1e201
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Exposing isEmpty, getLengthA, getLengthB make it easier to examine
the state of an edit and work with it from higher level code.
The before and after cut routines make it easy to split an edit
that contains another edit, such as to decompose a REPLACE that
contains a common sequence within it.
Change-Id: Id63d6476a7a6b23acb7ab237d414a0a1a7200290
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We shouldn't escape non-special ASCII characters such as '@' or '~'.
These are valid in a path name on POSIX systems, and may appear as
part of a path in a GNU or Git style patch script. Escaping them
into octal just obfuscates the user's intent, with no gain.
When parsing an escaped octal sequence, we must parse no more
than 3 digits. That is, "\1002" is actually "@2", not the Unicode
character \u0202.
Change-Id: I3a849a0d318e69b654f03fd559f5d7f99dd63e5c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we get an exception while indexing the incoming pack, its likely
a stream corruption. We already report an error to the client, but
we eat the stack trace, which makes debugging issues related to a
bug inside of JGit nearly impossible. Rethrow it under a new type
UnpackException, so embedding servers or applications can catch the
error and provide it to a human who might be able to forward such
traces onto a JGit developer for evaluation.
Change-Id: Icad41148bbc0c76f284c7033a195a6b51911beab
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Applications just want a quick way to configure our diff
implementation, and then just want to use it without a lot of fuss.
Move all of the rename detection logic and path following logic
out of our pgm package and into DiffFormatter itself, making it
much easier for a GUI to take advantage of the features without
duplicating a lot of code.
Change-Id: I4b54e987bb6dc804fb270cbc495fe4cae26c7b0e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Create a new 'org.eclipse.jgit.api.errors' package to contain
exceptions related to using the Git porcelain API.
Change-Id: Iac1781bd74fbd520dffac9d347616c3334994470
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
When adding or deleting a file, we shouldn't ever prefix /dev/null
with the a/ or b/ prefixes. Doing so is a mistake and confuses a
patch parser which handles /dev/null magically, while a/dev/null is
a file called null in the dev directory of the project.
Also when adding or deleting the "diff --git" line has the "real"
path on both sides, so we should see the following when adding the
file called foo:
diff --git a/foo b/foo
--- /dev/null
+++ b/foo
The --- and +++ lines do not appear in a pure rename or copy delta,
C Git diff seems to omit these, so we now omit them as well. We also
omit the index line when the ObjectIds are exactly equal.
Change-Id: Ic46892dea935ee8bdee29088aab96307d7ec6d3d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Currently, if a branch is created that has special chars ('#' in the bug),
Config will surround the subsection name with double quotes during
it's toText method which will result in an invalid file after saving the
Config.
Bug: 318249
Change-Id: I0a642f52def42d936869e4aaaeb6999567901001
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Extended flags are processed and available via DirCacheEntry's
new isSkipWorkTree() and isIntentToAdd() methods. "resolve-undo"
information is completely ignored since its an optional extension.
Change-Id: Ie6e9c6784c9f265ca3c013c6dc0e6bd29d3b7233
The merge algorithm was reporting conflicts which where to big.
Example: The common base was "ABC", the "ours" version contained
"AB1C" (the addition of "1" after pos 2) and the "theirs" version also
contained "AB1C". We have two potentially conflicting edits in the
same region which happen to bring in exactly the same content. This
should not be a conflict - but was previously reported as
"AB<<<1===1>>>C".
This is fixed by checking every conflicting chunk whether the
conflicting regions have a common prefix or suffix and by removing
this regions from the conflict.
Change-Id: I4dc169b8ef7a66ec6b307e9a956feef906c9e15e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This adds the first merge strategy to JGit which does real
content-merges if necessary. The new merge strategy "resolve" takes as
input three commits: a common base, ours and theirs. It will simply takeover
changes on files which are only touched in ours or theirs. For files
touched in ours and theirs it will try to merge the two contents
knowing taking into account the specified common base.
Rename detection has not been introduced for now.
Change-Id: I49a5ebcdcf4f540f606092c0f1dc66c965dc66ba
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
On Mac OS X MyerDiffPerformanceTest was failing since during the
first few tests the JIT compiler is running in parallel slowing down
the tests. When setting the JVM option -Xbatch forcing the JIT to do
its work prior to running the code this effect can be avoided. Instead
we chose to run some tests without recording prior to the recorded
tests since relying on -X JVM parameters isn't portable across JVMs.
Use 10k * powers of 2 as sample size instead of odd numbers used
before and also improve formatting of performance readings.
Bug: 323766
Change-Id: I9a46d73f81a785f399d3cf5a90c8c0516526e048
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Use 3 different types of LargeObjectException for the 3 major ways
that we can fail to load an object. For each of these use a unique
string translation which describes the root cause better than just
the ObjectId.name() does.
Change-Id: I810c98d5691b74af9fc6cbd46fc9879e35a7bdca
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add an explicit test case to check that we don't
overwrite dirty files in case Head & Index are
equal.
Change-Id: I6266d0a449e55369d2d0a048694dca5565c5fcf3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This reverts commit db4c516f67 since
it breaks compatibility with Eclipse 3.5 which can no longer import
the projects
Bug: 323390
Change-Id: I3cc91364a6747cfcb4c611a9be5258f81562f726
A tag command is added to the Git porcelain API. Tests were
also added to stress test the tag command.
Change-Id: Iab282a918eb51b0e9c55f628a3396ff01c9eb9eb
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implementation of a checkout (or 'git read-tree') operation which
works together with DirCache. This implementation does similar things
as WorkDirCheckout which main problem is that it works with deprecated
GitIndex. Since GitIndex doesn't support multiple stages of a file
which is required in merge situations this new implementation is
required to enable merge support.
Change-Id: I13f0f23ad60d98e5168118a7e7e7308e066ecf9c
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Otherwise PackFileTest.testDelta_LargeObjectChain() reproducibly
fails with OutOfMemoryError on Mac OS X 10.6.4.
Change-Id: I6a55ff9ba181102606a0d99ffd52392a1615a422
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Updates the project level settings to run the formatter
on save on only on the edited lines.
Change-Id: I26dd69d0c95e6d73f9fdf7031f3c1dbf3becbb79
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
We should use JUnit4 for tests. This patch updates
the MANIFEST.MF and respective launch configurations.
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
PersonIdent should be parsable for an invalid commit which
contains multiple authors, like "A <a@a.org>, B <b@b.org>".
PersonIdent(String) constructor now delegates to
RawParseUtils.parsePersonIdent().
Change-Id: Ie9798d36d9ecfcc0094ca795f5a44b003136eaf7
Because we are using the large stream size, we have to be
above the STREAM_THRESHOLD constant, which I just increased.
Change-Id: I6f10ec8558d9f751d4b547fcae05af94f1c8866b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We can now resolve expressions that reference a path within a
commit, designating a specific revision of a specific tree or
file in the project.
Change-Id: Ie6a8be629d264d72209db894bd680c5900035cc0
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We now match on the -gABBREV style output created by git describe
when its describing a non-tagged commit, and resolve that back to
the full ObjectId using the abbreviation resolution feature that
we already support.
Change-Id: Ib3033f9483d9e1c66c8bb721ff48d4485bcdaef1
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Calling it by the old numerical numbering system makes it really
hard to find the test that tests Repository.resolve(String).
Change-Id: I92d0ecbc8d66ce21bfed08888eeedf1300ffa594
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its wrong to return null if we are resolving an abbreviation and we
have proven it matches more than one object. We know how to resolve
it if we had more nybbles, as there are two or more objects with the
same prefix. Declare that to the caller quite clearly by giving them
an AmbiguousObjectException.
Change-Id: I01bb48e587e6d001b93da8575c2c81af3eda5a32
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some algorithms are coded in a way that requires us to provide them
the entire object contents as a contiguous byte array. The parsers
in RevCommit and RevTag, or our RawText objects are really good
examples of these.
Instead of duplicating this logic everywhere, lets put it into the
base ObjectLoader type. That way the caller only needs to give us
their upper size bound, and we'll do the rest of the heavy work to
figure out if the object still fits within that bound, and get them
an array that has the complete contents.
Change-Id: Id95a7f79d2b97e39f6949370ccca2f2c9cfb1a0f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
If we can't resolve an abbreviation, it might be because there is
a new pack file we haven't picked up yet. Try scanning the packs
again and recheck each pack if there were differences from the last
scan we did.
Because of this, we don't have to open a pack during the test where
we generate a pack on the fly. We'll miss on the first loop during
which the PackList is the NO_PACKS magic initialization constant,
and pick up the newly created index during this retry logic.
Change-Id: I7b97efb29a695ee60c90818be380f7ea23ad13a3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ObjectReader implementations are now responsible for creating the
unique abbreviation of an ObjectId, or for resolving an abbreviation
back to its full form. In this latter case the reader can offer up
multiple candidates to the caller, who may be able to disambiguate
them based on context.
Repository.resolve() doesn't take multiple candidates into account
right now, but it could in the future by looking for a remaining
^0 or ^{commit} suffix and take an expansion if there is only one
commit that matches the input abbreviation. It could also use
the distance from an annotated tag to resolve "tag-NNN-gcommit"
style strings that are often output by `git describe`.
Change-Id: Icd3250adc8177ae05278b858933afdca0cbbdb56
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ObjectWriter is a deprecated API that people shouldn't be using.
So get rid of it in favor of the ObjectInserter API.
Change-Id: I6218bcb26b6b9ffb64e3e470dba5dca2e0a62fd4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These objects should be responsible for their own formatting,
rather than delegating it to some obtuse type called ObjectInserter.
While we are at it, simplify the way we insert these into a database.
Passing in the type and calling format in application code turned
out to be a huge mistake in terms of ease-of-use of the insert API.
Change-Id: Id5bb95ee56aa2a002243e9b7853b84ec8df1d7bf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since these types no longer support reading, calling them a Builder
is a better description of what they do. They help the caller to
build a commit or a tag object.
Change-Id: I53cae5a800a66ea1721b0fe5e702599df31da05d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
WorkingTreeIterator now optionally performs CRLF to LF conversion for
text files. A basic framework is left in place to support enabling
(or disabling) this feature based on gitattributes, and also to
support the more generic smudge/clean filter system. As there is
no gitattribute support yet in JGit this is left unimplemented,
but the mightNeedCleaning(), isBinary() and filterClean() methods
will provide reasonable places to plug that into in the future.
[sp: All bugs inside of WorkingTreeIterator are my fault, I wrote
most of it while cherry-picking this patch and building it on
top of Marc's original work.]
CQ: 4419
Bug: 301775
Change-Id: I0ca35cfbfe3f503729cbfc1d5034ad4abcd1097e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Callers might have a canonical tag encoding on hand that they
wish to convert into a clean structure for presentation purposes,
and the object may not be available in a repository. (E.g. maybe
its a "draft" tag being written in an editor.)
Change-Id: I387a462afb70754aa7ee20891e6c0262438fdf32
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Callers might have a canonical commit encoding on hand that they
wish to convert into a clean structure for presentation purposes,
and the object may not be available in a repository. (E.g. maybe
its a "draft" commit being written in an editor.)
Change-Id: I21759cff337cbbb34dbdde91aec5aa4448a1ef37
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tag class now only supports the creation of an annotated tag
object. To read an annotated tag, applictions should use RevTag.
This permits us to have exactly one implementation, and RevTag's
is faster and more bug-free.
Change-Id: Ib573f7e15f36855112815269385c21dea532e2cf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Commit class now only supports the creation of a commit object.
To read a commit, applictions should use RevCommit. This permits
us to have exactly one implementation, and RevCommit's is faster
and more bug-free.
Change-Id: Ib573f7e15f36855112815269385c21dea532e2cf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ReadTreeTests relied on Repository.getIndex() which on
platforms which coarse FileSystemTimers failed to detect
index modifications. By explicitly reloading and writing
the index this problem is solved.
Change-Id: I0a98babfc2068a3b6b7d2257834988e1154f5b26
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When RevObject overrode equals() to provide only reference equality
we used to need to convert a RevObject into an ObjectId by copy()
just to use standard Java tools like JUnit assertEquals(), or to
use contains() or get() on standard java.util collection types.
Now that we have removed this override and made ObjectId's equals()
final (preventing any of this mess in the future), some copy()
calls are unnecessary. Anytime the value is being used as an input
to a lookup routine, or to an equals, we can avoid the copy().
However we still want to use copy() anytime we are given an ObjectId
that may exist long-term, where we don't want the high cost of the
additional storage from a RevCommit extension. So we can't remove
all uses of copy(), just some of them.
Change-Id: Ief275dace435c0ddfa362ac8e5d93558bc7e9fc3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Configuration change events were not being triggered, now they are
forwarded from the FileConfig up to the Repository's listeners.
Change-Id: Ida94a59f5a2b7fa8ae0126e33c13343275483ee5
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There was a duplicated getter and setter for tagger in Tag.
There's no needed to have two getters and setters that represent
the same things. The appropriate tests were updated also.
Change-Id: If46dc00c4c0f31ea4234c6d3bda3c03e6ebbafac
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
indexState() encodes the complete state of the index
into one readable String. This helps to write tests
against the index. indexState() is enhanced to optionally
also contain the content of the files in the index.
Change-Id: Ie988f93768d864f4cbd55809a786bd5759fc24a5
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Added a utility method to set the reset an index to match exactly
some content in the filesystem. This can be used by tests to prepare
commits in the working-tree and set the index in one shot.
[sp: Cleaned up formatting, added getEntryFile(), released inserter.]
Change-Id: If38b1f7cacaaf769f51b14541c5da0c1e24568a5
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This patch fixes the problem that JGit tests run from Maven fail on
Mac OS X [1]. In Eclipse the tests succeed since we set Eclipse
workspace encoding to UTF-8 via "Preferences > General > Workspace
> Text file encoding", checked via JConsole that this setting changes
the JVM system property of the test run. This change copies this
setting to the Maven test environment so that we get consistent test
results on all platforms.
[1] http://kerneltrap.org/mailarchive/git/2009/2/6/4916414/thread
Change-Id: Ia657d4037c518411f7bc3c75626dbafb1f4706a2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the exact rename matrix for a particular ObjectId isn't square we
crashed with an ArrayIndexOutOfBoundsException because the matrix
entries were encoded backwards. The encode function accepts the
source (aka deleted) index first, not second. Add a unit test to
cover this non-square case to ensure we don't have this regression
in the future.
Change-Id: I5b005e5093e1f00de2e3ec104e27ab6820203566
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* changes:
Enable configuration of non-standard pack settings
Pass PackConfig down to PackWriter when packing
Simplify UploadPack use of options during writing
Move PackWriter configuration to PackConfig
Allow PackWriter callers to manage the thread pool
It is useful to be able to replace an existing Change-Id
in the message, for example if the user decides not to
amend the previous commit.
Bug: 321188
Change-Id: I594e7f9efd0c57d794d2bd26d55ec45f4e6a47fd
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
TreeWalk calls this value "path", while "name" is the stuff after the
last slash. FileHeader should do the same thing to be consistent.
Rename getOldName to getOldPath and getNewName to getNewPath.
Bug: 318526
Change-Id: Ib2e372ad4426402d37939b48d8f233154cc637da
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A bug in rename detection would cause file scores to be wrong. The
bug was due to the way rename detection would judge the similarity
between files. If file A has three lines containing 'foo', and file
B has 5 lines containing 'foo', the rename detection phase should
record that A and B have three lines in common (the minimum of the
number of times that line appears in both files). Instead, it would
choose the the number of times the line appeared in the destination
file, in this case file B. I fixed the bug by having the
SimilarityIndex instead choose the minimum number, as it should. I
also added a test case to verify that the bug had been fixed.
Change-Id: Ic75272a2d6e512a361f88eec91e1b8a7c2298d6b
IndexDiff was re-implemented and now uses TreeWalk instead
of GitIndex. Additionally, gitignore support and retrieval of
untracked files was added.
Change-Id: Ie6a8e04833c61d44c668c906b161202b200bb509
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
When the add parameter is set all modified and deleted files
are staged prior to commit.
Change-Id: Id23bc25730fcdd151386cd495a7cdc0935cbc00b
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
This change is mainly done for a subsequent commit
which will introduce the "all" parameter to the Commit
command.
Bug: 318439
Change-Id: I85a8a76097d0197ef689a289288ba82addb92fc9
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
An utility method which was in RacyGitTests has been moved to
RepositoryTestCase. Also the javadoc has been improved.
This method allows to wait long enough until the
filesystem-timer has advanced. This is useful when it has to
be guaranteed that two files modifications have different
modification timestamps.
Change-Id: I2ebd7cd7818feba6acffb3f835101d8fd281bd5a
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The indexState() method was enhanced to be more configurable. A bitmask
controls which of the optional parts are reported. All data about
the worktree is not reported anymore by this method which makes the
interface more cleaner for users wanting to test only the state of the
index.
This was done because the previous version reported always so much
additional data that it was hard to write good assertions against it.
Change-Id: I9b481e97f8fcf3fcdbb785b801dc07bfa85dcc33
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
getEntryLastModified returned wrong values for
timestamps on boundaries.
Change-Id: I0457ff030946fda7ecc70671bc65db02a8c206ee
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Its only available in Java 6, and JGit still supports Java 5.
Change-Id: I6c8fac06106ffe20ac8b4b595f34e027f2d29cc2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In order to test racy git situations we have to be able to control
the last-modification timestamps of the filesystem. Since we already
access the modification timestamps of files through an abstraction
(the WorkingTreeIterator) I add a new implementation of this iterator
which allows to map timestamp-ranges to single constant timestamps.
For users of this iterator it looks like all files in that range
have been modified at exactly the same time.
With the help of this iterator a test has been writting which
checkes for racy git handling (smudging, unsmudging, dirty-detection).
Additionally add a method to RepositoryTestCase which encodes the
current index state in one String. This should include info about
pathes, file/index modtime, smudgeState, clean-state. Make
sure timestamps are presented in a way that it is easy to
write assertions against this strings (no concrete milliseconds
but t0,t1,...).
These two topics depend circulary on each other: thats why they have
been squashed in one commit.
Change-Id: I115c3f2f20fca9b481830bdc6b9d1ade2c3abdcf
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This refactoring permits applications to configure global per-process
settings for all packing and easily pass it through to per-request
PackWriters, ensuring that the process configuration overrides the
repository specific settings.
For example this might help in a daemon environment where the server
wants to cap the resources used to serve a dynamic upload pack
request, even though the repository's own pack.* settings might be
configured to be more aggressive. This allows fast but less bandwidth
efficient serving of clients, while still retaining good compression
through a cron managed `git gc`.
Change-Id: I58cc5e01b48924b1a99f79aa96c8150cdfc50846
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a method isDirectoryFileConflict() to NameConflictTreeWalk which
tells whether the current path is part of a directory/file conflict.
Change-Id: Iffcc7090aaec743dd6f3fd1a333cac96c587ae5d
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
File pairs that are very dissimilar during a diff were not being
broken apart into their constituent ADD/DELETE pairs. The leads to
sub-optimal rename detection. Take, for example, this situation:
A file exists at src/a.txt containing "foo". A user renames src/a.txt
to src/b.txt, then adds a new src/a.txt containing "bar".
Even though the old a.txt and the new b.txt are identical, the
rename detection algorithm would not detect it as a rename since
it was already paired in a MODIFY. I added code to split all
MODIFYs below a certain score into their constituent ADD/DELETE
pairs. This allows situations like the one I described above to be
more correctly handled.
Change-Id: I22c04b70581f206bbc68c4cd1ee87a1f663b418e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add methods to the Repository class which write into MERGE_HEAD
and MERGE_MSG files. Since we have the read methods in the same
class this seems to be the right place.
Change-Id: I5dd65306ceb06e008fcc71b37ca3a649632ba462
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
LockFile.commit fails if another thread concurrently reads
the base file. The problem is fixed by retrying the rename
operation if it fails.
Change-Id: I6bb76ea7f2e6e90e3ddc45f9dd4d69bd1b6fa1eb
Bug: 308506
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
There were some broken links, incorrect uses of @value, an invalid
tag and an outdated comment.
Change-Id: I22886bcc869a4b62bd606ebed40669f7b4723664
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* delta: (103 commits)
Discard the uncompressed delta as soon as its compressed
Honor pack.windowlimit to cap memory usage during packing
Honor pack.threads and perform delta search in parallel
Cache small deltas during packing
Implement delta generation during packing
debug-show-packdelta: Dump a pack delta to the console
Initial pack format delta generator
Add debugging toString() method to ObjectToPack
Make ObjectToPack clearReuseAsIs signal available to subclasses
Correctly classify the compressing objects phase
Refactor ObjectToPack's delta depth setting
Configure core.bigFileThreshold into PackWriter
Add doNotDelta flag to ObjectToPack
Add more configuration options to PackWriter
Save object path hash codes during packing
Add path hash code to ObjectWalk
Add getObjectSize to ObjectReader
Allow TemporaryBuffer.Heap to allocate smaller than 8 KiB
Define a constant for 127 in DeltaEncoder
Cap delta copy instructions at 64k
...
Conflicts:
org.eclipse.jgit.pgm/src/org/eclipse/jgit/pgm/Diff.java
org.eclipse.jgit/resources/org/eclipse/jgit/JGitText.properties
org.eclipse.jgit/src/org/eclipse/jgit/JGitText.java
org.eclipse.jgit/src/org/eclipse/jgit/revwalk/RewriteTreeFilter.java
Change-Id: I7c7a05e443a48d32c836173a409ee7d340c70796
The working tree iterator has perfect knowledge of the path structure
as well as immediate information about whether or not an ignore file
even exists at this level. We can exploit that to simplify the
logic and running time for testing ignored file status by pushing
all of the checks down into the iterator itself.
Change-Id: I22ff534853e8c5672cc5c2d9444aeb14e294070e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Charley Wang <chwang@redhat.com>
CC: Chris Aniszczyk <caniszczyk@gmail.com>
CC: Stefan Lay <stefan.lay@sap.com>
CC: Matthias Sohn <matthias.sohn@sap.com>
If we have two adds of the same object but no deletes the detector
threw an NPE because the entry that came back from the deleted map
was null (no matching objects). In this case we need to put the
adds all back onto the list of left over additions since they did
not match a delete.
Change-Id: Ie68fbe7426b4dc0cb571a08911c7adbffff755d5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Jeffrey Schumacher" <jeffschu@google.com>
* js/rename:
Implemented file path based tie breaking to exact rename detection
Added more test cases for RenameDetector
Added very small optimization to exact rename detection
Fixed Misleading Javadoc
Added file path similarity to scoring metric in rename detection
Fixed potential div by zero bug
Added file size based rename detection optimization
Create FileHeader from DiffEntry
log: Implement --follow
Cache the diff configuration section
log: Add whitespace ignore options
Format submodule links during differences
Redo DiffFormatter API to be easier to use
log, diff: Add rename detection support
Implement similarity based rename detection
Added a preliminary version of rename detection
Refactored code out of FileHeader to facilitate rename detection
During the exact rename detection phase in RenameDetector, ties were
resolved on a first-found basis. I added support for file path based
tie breaking during that phase. Basically, there are four situations
that have to be handled:
One add matching one delete:
In this simple case, we pair them as a rename.
One add matching many deletes:
Find the delete whos path matches the add the closest, and
pair them as a rename.
Many adds matching one delete:
Similar to the above case, we find the add that matches the
delete the closest, and pair them as a rename. The other adds
are marked as copies of the delete.
Many adds matching many deletes:
Build a scoring matrix similar to the one used for content-
based matching, scoring instead by file path. Some of the
utility functions in SimilarityRenameDetector are used in
this case, as we use the same encoding scheme. Once the
matrix is built, scan it for the best matches, marking them
as renames. The rest are marked as copies.
I don't particularly like the idea of using utility functions right
out of SimilarityRenameDetector, but it works for the moment. A later
commit will likely refactor this into a common utility class, as well
as bringing exact rename detection out of RenameDetector and into a
separate class, much like SimilarityRenameDetector.
Change-Id: I1fb08390aebdcbf20d049aecf402a36506e55611
When the path is prefixed with ~ the URI parser thought about this
as /~. Strip the / if the next character is the tilde.
Bug: 307017
Change-Id: I58203e5617956b46d83e8987d1f8042beddffac3
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
The new Add command adds files to the Git Index.
It uses the DirCache to access the git index. It
works also in case of an existing conflict.
Fileglobs (e.g. *.c) are not yet supported.
The new Add command does add ignored files because
there is no gitignore support in jgit yet.
Bug: 318440
Change-Id: If16fdd4443e46b27361c2a18ed8f51668af5d9ff
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
After refactoring ReadTreeTest the tests failed for filesystems
with coarse modification time granularity. This is fixed by
explicitly telling the repo to reread the index after we build
a new index.
Additionally the test testDirectoryFileSimple was simplified
by using buildTree() instead of misusing GitIndex to construct
trees.
Change-Id: I20d2f097491e4cc8c657a696beabc7026b485017
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This patch adds ignore compatibility to jgit. It encompasses
exclude files as well as .gitignore. Uses TreeWalk and
FileTreeIterator to find nodes and parses .gitignore
files when required. The patch includes a simple cache that
can be used to save results and avoid excessive gitignore
parsing.
CQ: 4302
Bug: 303925
Change-Id: Iebd7e5bb534accca4bf00d25bbc1f561d7cad11b
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
I added test cases to cover the majority of the code. It's not 100%
coverage yet, but the remaining bits are small.
Change-Id: Ib534c8e94b13358b8b22cf54e2ff84132bae6d14
The scoring method was not taking into account the similarity of
the file paths and file names. I changed the metric so that it is 99%
based on content (which used to be 100% of the old metric), and 1%
based on path similarity. Of that 1%, half (.5% of the total final
score) is based on the actual file names (e.g. "foo.java"), and half
on the directory (e.g. "src/com/foo/bar/").
Change-Id: I94f0c23bf6413c491b10d5625f6ad7d2ecfb4def
DeltaIndex is a simple pack style delta generator. The function works
by creating a compact index of a source buffer's blocks, and then
walking a sliding window along a desired result buffer, searching for
the window in the index. When a match is found, the window is
stretched to the longest possible length that is common with the
source buffer, and a copy instruction is created.
Rabin's polynomial hash function is used to compute the hash for a
block, permitting efficient sliding of the window in single byte
increments. The update function to slide one byte originated from
David Mazieres' work in LBFS, and our implementation of the update
step was certainly inspired by the initial work Geert Bosch proposed
for C Git in http://marc.info/?l=git&m=114565424620771&w=2.
To ensure the encoder runs in linear time with respect to the size of
the two input buffers (source and result), the maximum number of
blocks that can share the same position in the index's hashtable is
capped at a constant number. This prevents bad inputs from causing
the encoder to run in quadratic time, but comes with a penalty of
creating a longer delta due to fewer considered copy positions.
Strange hackery is used to cap the amount of memory used by the index
to be no more than 12 bytes for every 16 bytes of source buffer, no
matter what the JVM per-object overhead is. This permits an index to
always be no larger than 1.75x the source buffer length, which is an
important feature to support large windows of candidates to match
against while packing. Here the strange hackery is nothing more than
a manually managed chained hashtable, where pointers are array indexes
into storage arrays rather than object references.
Computation of the hash function for a single fixed sized block is
done through an unrolled loop, where the first 4 iterations have been
manually reduced down to eliminate unnecessary instructions. The
pattern is derived from ObjectId.equals(byte[], int, byte[], int),
where we have unrolled the loop required to compare two 20 byte
arrays. Hours of testing with the Sun 1.6 JRE concluded that the
non-obvious "foo[idx + 1]" style of reference is faster than
"foo[idx++]", and so that is what we use here during hashing.
Change-Id: If9fb2a1524361bc701405920560d8ae752221768
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the heap limit was set to something smaller than 8 KiB, we were
still allocating the full 8 KiB block size, and accepting up to
the amount we allocated by. Instead actually put a hard cap on
the limit.
Change-Id: Id1da26fde2102e76510b1da4ede8493928a981cc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Added support for converting DiffEntrys to FileHeaders. FileHeaders
are DiffEntrys with a buffer containing the diff output as well as
a list of HunkHeaders. The HunkHeaders contain EditLists. The
createFileHeader(DiffEntry) method in DiffFormatter performs a Myers
Diff on the files refered to by the DiffEntry, then puts the returned
EditList into a single HunkHeader, which is then put into the
FileHeader to be returned. It also generates the appropriate diff
header an puts it into the FileHeader's buffer. The rest of the diff
output, which would normally be parsed to generate the HunkHeaders,
is not generated. In fact, the purpose of this method is to avoid
the costly diff output generation and parsing normally required to
create a FileHeader.
Change-Id: I7d8b18c0f6c85e3d02ad58995d3d231e69af5887
ReadTreeTest was hardcoded to test WorkDirCheckout. Since we want
alternative checkout implementations (especially DirCacheCheckout)
this class has been refactored so that the tests can be reused
to test other implementations
The following changes have been done:
- abstract methods for checkout and prescanTwoTrees have been
introduced. Parameters are only the two trees. As index we
will implicitly use the current index of the repo.
- whenever tests needed a manipulated index before checkout
and prescanTwoTrees it was ensured that the correct index was
persisted (before we could use not-persisted instantiations of GitIndex
passed as parameters to checkout, prescanTwoTrees
- abstract methods for getting updated, conflicting, removed entries
resulting from the last checkout, prescanTwoTrees have been introduced
- an implementation for all these abstract methods using WorkDirCheckout
has been added
- method to assert a certain state of the index and the working tree has
been added
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Change-Id: Icf177cf8043487169a32ddd72b6f8f9246a433f7
We want to get rid of these APIs, because they don't perform as well
as DirCache/TreeWalk, or don't offer nearly as many features.
Bug: 319145
Change-Id: I2b28f9cddc36482e1ad42d53e86e9d6461ba3bfc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We need to validate the stream state after the InflaterInputStream
thinks the stream is done. Git expects a higher level of service from
the Inflater than the InflaterInputStream usually gives, we need to
ensure the embedded CRC is valid, and that there isn't trailing
garbage at the end of the file.
Change-Id: I1c9642a82dbd76b69e607dceccf8b85dc869a3c1
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Passing around the OutputStream and the Repository is crazy. Instead
put the stream in the constructor, since this formatter exists only to
output to the stream, and put the repository as a member variable that
can be optionally set.
Change-Id: I2bad012fee7f40dc1346700ebd19f1e048982878
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Content similarity based rename detection is performed only after
a linear time detection is performed using exact content match on
the ObjectIds. Any names which were paired up during that exact
match phase are excluded from the inexact similarity based rename,
which reduces the space that must be considered.
During rename detection two entries cannot be marked as a rename
if they are different types of files. This prevents a symlink from
being renamed to a regular file, even if their blob content appears
to be similar, or is identical.
Efficiently comparing two files is performed by building up two
hash indexes and hashing lines or short blocks from each file,
counting the number of bytes that each line or block represents.
Instead of using a standard java.util.HashMap, we use a custom
open hashing scheme similiar to what we use in ObjecIdSubclassMap.
This permits us to have a very light-weight hash, with very little
memory overhead per cell stored.
As we only need two ints per record in the map (line/block key and
number of bytes), we collapse them into a single long inside of
a long array, making very efficient use of available memory when
we create the index table. We only need object headers for the
index structure itself, and the index table, but not per-cell.
This offers a massive space savings over using java.util.HashMap.
The score calculation is done by approximating how many bytes are
the same between the two inputs (which for a delta would be how much
is copied from the base into the result). The score is derived by
dividing the approximate number of bytes in common into the length
of the larger of the two input files.
Right now the SimilarityIndex table should average about 1/2 full,
which means we waste about 50% of our memory on empty entries
after we are done indexing a file and sort the table's contents.
If memory becomes an issue we could discard the table and copy all
records over to a new array that is properly sized.
Building the index requires O(M + N log N) time, where M is the
size of the input file in bytes, and N is the number of unique
lines/blocks in the file. The N log N time constraint comes
from the sort of the index table that is necessary to perform
linear time matching against another SimilarityIndex created for
a different file.
To actually perform the rename detection, a SxD matrix is created,
placing the sources (aka deletions) along one dimension and the
destinations (aka additions) along the other. A simple O(S x D)
loop examines every cell in this matrix.
A SimilarityIndex is built along the row and reused for each
column compare along that row, avoiding the costly index rebuild
at the row level. A future improvement would be to load a smaller
square matrix into SimilarityIndexes and process everything in that
sub-matrix before discarding the column dimension and moving down
to the next sub-matrix block along that same grid of rows.
An optional ProgressMonitor is permitted to be passed in, allowing
applications to see the progress of the detector as it works through
the matrix cells. This provides some indication of current status
for very long running renames.
The default line/block hash function used by the SimilarityIndex
may not be optimal, and may produce too many collisions. It is
borrowed from RawText's hash, which is used to quickly skip out of
a longer equality test if two lines have different hash functions.
We may need to refine this hash in the future, in order to minimize
the number of collisions we get on common source files.
Based on a handful of test commits in JGit (especially my own
recent rename repository refactoring series), this rename detector
produces output that is very close to C Git. The content similarity
scores are sometimes off by 1%, which is most probably caused by
our SimilarityIndex type using a different hash function than C
Git uses when it computes the delta size between any two objects
in the rename matrix.
Bug: 318504
Change-Id: I11dff969e8a2e4cf252636d857d2113053bdd9dc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
During code review, Alex raised a few comments about commit
532421d989 ("Refactor repository construction to builder class").
Due to the size of the related series we aren't going to go back
and rebase in something this minor, so resolve them as a follow-up
commit instead.
Change-Id: Ied52f7a8f7252743353c58d20bfc3ec498933e00
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We default this to 1 MiB for now, but we allow users to modify
it through the Repository's configuration file to be a different
value. A new repository listener is used to identify when the
setting has been updated and trigger a reconfiguration of any
active ObjectReaders.
To prevent a horrible explosion we cap core.streamFileThreshold
at no more than 1/4 of the maximum JVM heap size. We do this
because we need at least 2 byte arrays equal in size to the
stream threshold for the worst case delta inflation scenario,
and our host application probably also needs some amount of the
heap for their working set size.
Change-Id: I103b3a541dc970bbf1a6d92917a12c5a1ee34d6c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Very large delta instruction streams, or deltas which use very large
base objects, are now streamed through as large objects rather than
being inflated into a byte array.
This isn't the most efficient way to access delta encoded content, as
we may need to rewind and reprocess the base object when there was a
block moved within the file, but it will at least prevent the JVM from
having its heap explode.
When streaming a delta we have an inflater open for each level in the
delta chain, to inflate the instruction set of the delta, as well as
an inflater for the base level object. The base object is buffered,
as is the top level delta requested by the application, but we do not
buffer the intermediate delta streams. This keeps memory usage lower,
so its closer to 1024 bytes per level in the chain, without having an
adverse impact on raw throughput as the top-level buffer gets pushed
down to the lowest stream that has the next region.
Delta instructions transparently collapse here, if the top level does
not copy a region from its base, the base won't materialize that part
from its own base, etc. This allows us to avoid copying around a lot
of segments which have been deleted from the final version.
Change-Id: I724d45245cebb4bad2deeae7b896fc55b2dd49b3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Similar to the loose object support, whole packed objects can
now be streamed back to the caller. The streaming is less
efficient as we copy the data from the cached window array
into the InflaterInputStream's internal buffer, then inflate
it there before returning to the application.
Like with unpacked objects, there is plenty of room for some
optimization, especially for the copyTo method, where we don't
necessarily need so much buffering to exist.
Change-Id: Ie23be81289e37e24b91d17b0891e47b9da988008
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The class is identical, but ObjectLoader.SmallObject is part of our
public API for storage implementations to build on top of.
Change-Id: I381a3953b14870b6d3d74a9c295769ace78869dc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Big loose objects can now be streamed if they are over the large
object size threshold. This prevents the JVM heap from exploding
with a very large byte array to hold the slurped file, and then
again with its uncompressed copy.
We may have slightly slowed down the simple case for small
loose objects, as the loader no longer slurps the entire thing
and decompresses in memory. To try and keep good performance
for the very common small objects that are below 8 KiB in size,
buffers are set to 8 KiB, causing the reader to slurp most of the
file anyway. However the data has to be copied at least once,
from the BufferedInputStream into the InflaterInputStream.
New unit tests are supplied to get nearly 100% code coverage on the
unpacked code paths, for both standard and pack style loose objects.
We tested a fair chunk of the code elsewhere, but these new tests
are better isolated to the specific branches in the code path.
Change-Id: I87b764ab1b84225e9b5619a2a55fd8eaa640e1fe
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
JGit does not currently do rename detection during diffs. I added
a class that, given a TreeWalk to iterate over, can output a list
of DiffEntry's for that TreeWalk, taking into account renames. This
class only detects renames by SHA1's. More complex rename detection,
along the lines of what C Git does will be added later.
Change-Id: I93606ce15da70df6660651ec322ea50718dd7c04
Instead of creating the DirCache from a static factory method, use
an instance method on Repository, permitting the implementation to
override the method with a completely different type of DirCache
reading and writing. This would better support a repository in the
cloud strategy, or even just an in-memory unit test environment.
Change-Id: I6399894b12d6480c4b3ac84d10775dfd1b8d13e7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Using a custom exception type makes it easire for an application
developer to understand why an exception was thrown out of a method
we declare. To remain compatiable with existing callers, we still
extend off IllegalStateException.
Change-Id: Ideeef2399b11ca460a2dbb3cd80eb76aa0a025ba
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We don't actually need a Repository object here, just an ObjectReader
that can load content for us. So change the API to depend on that.
However, this breaks the asCommit and asTag legacy translation methods
on RevCommit and RevTag, so we still have to keep the Repository
inside of RevWalk for those two types. Hopefully we can drop those in
the future, and then drop the Repository off the RevWalk.
Change-Id: Iba983e48b663790061c43ae9ffbb77dfe6f4818e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Added code to support ignoring leading, trailing, and changed
whitespace when performing a diff operation. I also added command
line options to Diff to enable the various whitespace ignoring
methods. These match the flags for git diff.
Change-Id: Ie56301aafad59ee3f0fe5de62719f5023cd702c8
We drop the "Object" suffix, because its pretty clear here that
we want to open an object, given that we pass in AnyObjectId as
the main parameter. We also fix the calling convention to throw
a MissingObjectException or IncorrectObjectTypeException, so that
callers don't have to do this error checking themselves.
Change-Id: I72c43353cea8372278b032f5086d52082c1eee39
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than taking the ProgressMonitor objects in our constructor and
carrying them around as instance fields, take them as arguments to the
actual time consuming operations we need to run.
Change-Id: I2b230d07e277de029b1061c807e67de5428cc1c4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
JGit did not have support for skipping whitespace when comparing
lines in RawText objects. I added a subclass of RawText that skips
whitespace in its equals and hashCode methods. I used a subclass
rather than adding functionality into RawText so that performance
would not be impacted by extra logic.
This class only supports ignoring all whitespace. Others will follow
that allow other forms of whitespace ignoring.
Change-Id: Ic2f79e85215e48d3fd53ec1b4ad13373dd183a4a
The ObjectReader API demands that we release the reader when we are
done with it. PackWriter contains a reader, which it uses for the
entire packing session. Expose the release of the reader through
a release method on the writer.
This still doesn't address the RevWalk and TreeWalk users, who
don't correctly release their reader. But its a small step in the
right direction.
Change-Id: I5cb0b5c1b432434a799fceb21b86479e09b84a0a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Similar to what we did with the file code, move the pack writer
into its own package so the related classes and their package
private methods are hidden from the rest of the library.
Change-Id: Ic1b5c7c8c8d266e90c910d8d68dfc8e93586854f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We no longer need an ObjectLoader to be lazy and try to delay
the materialization of the object content. That was done only
to support PackWriter searching for a good reuse candidate.
Instead, simplify the code base by doing the materialization
immediately when the loader asks for it, because any caller
asking for the loader is going to need the content.
Change-Id: Id867b1004529744f234ab8f9cfab3d2c52ca3bd0
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These were only used by PackWriter to help it filter object
representations. Their only user disappeared when we rewrote the
object selection code path to use the new representation type.
Change-Id: I9ed676bfe4f87fcf94aa21e53bda43115912e145
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This move isolates all of the local file specific implementation code
into a single package, where their package-private methods and support
classes are properly hidden away from the rest of the core library.
Because of the sheer number of files impacted, I have limited this
change to only the renames and the updated imports.
Change-Id: Icca4884e1a418f83f8b617d0c4c78b73d8a4bd17
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Only the ObjectDirectory type of database knows where to find the
objects directory on the local filesystem, so defer to it whenever
we need to know where the objects reside. Since this is the type
returned by FileRepository's getObjectDatabase() method, we mostly
don't have to do much other than use a slightly longer invocation.
Change-Id: Ie5f58132a6411b56c3acad73646ad169d78a0654
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This better matches with the name used in the environment
(GIT_WORK_TREE), in the configuration file (core.worktree),
and in our builder object.
Since we are already breaking a good chunk of other code
related to repository access, and this fairly easy to fix
in an application's code base, I'm not going to offer the
wrapper getWorkDir() method.
Change-Id: Ib698ba4bbc213c48114f342378cecfe377e37bb7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The new FileRepositoryBuilder class helps applications to construct
a properly configured FileRepository, with properties assumed based
upon the standard Git rules for the local filesystem.
To better support simple command line applications, environment
variable handling and repository searching was moved into this
builder class.
The change gets rid of the ever-growing FileRepository constructor
variants, and the multitude of java.io.File typed parameters,
by using simple named setter methods.
Change-Id: I17e8e0392ad1dbf6a90a7eb49a6d809388d27e4c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Not every type of Repository will be able to map an ObjectId into
a local file system path that stores that object's file contents.
Heck, its not even true for the FileRepository, as an object can
be stored in a pack file and not in its loose format.
Remove this from our public API, it was a mistake to publish it.
Change-Id: I20d1b8c39104023936e6d46a5b0d7ef39ff118e8
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The WindowCache is an implementation detail of PackFile and how its
used by ObjectDirectory. Lets start to hide it and replace the public
API with a more generic concept, ObjectReader.
Because PackedObjectLoader is also considered a private detail of
PackFile, we have to make PackWriter temporarily dependent upon the
WindowCursor and thus FileRepository and ObjectDirectory in order to
just start the refactoring. In later changes we will clean up the
APIs more, exposing sufficient support to PackWriter without needing
the file specific implementation details.
Change-Id: I676be12b57f3534f1285854ee5de1aa483895398
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some newer style APIs are updated to use the newer ObjectInserter
interface instead of the now deprecated ObjectWriter. In many of
the unit tests we don't bother to release the inserter, these are
typically using the file backend which doesn't need a release,
but in the future should use an in-memory HashMap based store,
which really wouldn't need it either.
Change-Id: I91a15e1dc42da68e6715397814e30fbd87fa2e73
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The ObjectInserter API permits ObjectDatabase implementations to
control their own object insertion behavior, rather than forcing
it to always be a new loose file created in the local filesystem.
Inserted objects can also be queued and written asynchronously to
the main application, such as by appending into a pack file that
is later closed and added to the repository.
This change also starts to open the door to non-file based object
storage, such as an in-memory HashMap for unit testing, or a more
complex system built on top of a distributed hash table.
To help existing application code port to the newer interface we
are keeping ObjectWriter as a delegation wrapper to the new API.
Each ObjectWriter instances holds a reference to an ObjectInserter
for the Repository's top-level ObjectDatabase, and it flushes and
releases that instance on each object processed.
Change-Id: I413224fb95563e7330c82748deb0aada4e0d6ace
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the surrounding code is already heavily based upon the
assumption that we have a FileRepository (e.g. because it
created that type of repository) keep the type around and
use it directly. This permits us to continue to do things
like save the configuration file.
Change-Id: Ib783f0f6a11acd6aa305c16d61ccc368b46beecc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To support other storage models other than just the local filesystem,
we split the Repository class into a nearly abstract interface and
then create a concrete subclass called FileRepository with the file
based IO implementation.
We are using an abstract class for Repository rather than the much
more generic interface, as implementers will want to inherit a large
array of utility functions, such as resolve(String). Having these in
a base class makes it easy to inherit them.
This isn't the final home for lib.FileRepository. Future changes
will rename it into storage.file.FileRepository, but to do that we
need to also move a number of other related class, which we aren't
quite ready to do.
Change-Id: I1bd54ea0500337799a8e792874c272eb14d555f7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than relying on the helpers in RepositoryConfig to get
these objects, obtain them directly through the Config API.
Its only slightly more verbose, but permits us to work with the
base Config class, which is more flexible than the highly file
specific RepositoryConfig.
This is what I really meant to do when I added the section parser
and caching support to Config, we just failed to finish updating
all of the call sites.
Change-Id: I481cb365aa00bfa8c21e5ad0cd367ddd9c6c0edd
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We don't have to assume/depend on RepositoryConfig here, these
two tests can use higher level versions of the class and still
come up with the same test. That frees us up to do some changes
to the RepositoryConfig API.
Change-Id: Ia7b263c8c5efa3fae1054416d39c546867288132
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Long ago we stopped supporting the core.legacyHeaders variable,
as JGit (like C Git) stopped creating the new pack-style loose
objects, rendering this variable pointless. The test is still
valid, it proves we write the standard loose object format for
a commit, but the variable assignment has no impact on the test
so drop it from the code.
Change-Id: I051336ada23033c05e86bbff73ae5d78a37b1640
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This stream was used only to determine how many bytes had been
written thus far. Except we're always dumping it into a simple
ByteArrayOutputStream, which also knows that. Drop the dependency
on the pack stream and use ByteArrayOutputStream directly.
This lets us later move this test into the new storage.file
package without dragging along the pack stream that is an internal
implementation detail of PackWriter, which is more general than
just the file storage layer.
Change-Id: I291689c0b1ed799270c213ee73b710b2637fb238
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Setting this value is pointless, because its automatically set
by the refs.newUpdate call that created the update operation.
The API is protected by default, because application level code,
including this test, should not be calling it.
Change-Id: I8867a4e8007892e2bd44a05d7dec619081081943
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The mapCommit API is being deprecated because it doesn't run very
fast. Leaving tests around to test how fast it is relative to C Git
isn't instructive. Remove them, which should help aid the transition
away from the mapCommit API.
Change-Id: I27e1c844610d7da5b2c44b33a00602706973c9cc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some sources had dos line endings. Also configure all projects to use
unix line endings and UTF-8 text encoding.
Change-Id: I8fc9a1dbb219ffa91d1b3011b3b11b7e48e74ca7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If a repository is "bare", it currently still returns a working directory.
This conflicts with the specification of "bare"-ness.
Bug: 311902
Change-Id: Ib54b31ddc80b9032e6e7bf013948bb83e12cfd88
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Currently, there is no way to read the content
of the Git Configuration in a way that would
allow to list all configured values generically.
This change extends the Config class in such a
way as to being able to get a list of sections and
to get a list of names for any given section or
subsection.
This is required in able to implement proper
configuration handling in EGit (show all the
content of a given configuration similar to
"git config -l").
Change-Id: Idd4bc47be18ed0e36b11be8c23c9c707159dc830
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
On Windows, FS_Win32_Cygwin has been used if a Cygwin Git installation
is present in the PATH. Assuming that the user works with the Cygwin
Git installation may result in unnecessary overhead if he actually
does not.
Applications built on top of jgit may have more knowledge on the
actually used Git client (Cygwin or not) and hence should be able to
configure which FS to use accordingly.
Change-Id: Ifc4278078b298781d55cf5421e9647a21fa5db24
A Change-Id helps tools like Gerrit Code Review to keeps different
versions of a patch together. The Change-Id is computed as a SHA-1
hash of some of the same basic information as a commit id on the first
commit intended to solve a particular problem and then reused for
updated solutions.
Change-Id: I04334f84e76e83a4185283cb72ea0308b1cb4182
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
ReadTreeTest contains a lot of useful tests for "checkout"
implementations. But ReadTreeTest was hardcoded to test only
WorkDirCheckout. This change doesn't add/modify any tests semantically
but refactors ReadTreeTest so that a different implementations of
checkout can be tested. This was done to allow DirCacheCheckout to be
tested without rewriting all these tests.
Change-Id: I36e34264482b855ed22c9dde98824f573cf8ae22
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Christian Halstrick