Add the following statistics
- cache hit count and hit ratio
- cache miss count and miss ratio
- count of successful and failed loads
- rate of failed loads
- load, eviction and request count
- average and total load time
Use LongAdder instead of AtomicLong to implement counters in order to
improve scalability.
Optionally expose these metrics via JMX, they are registered with the
platform MBean server if the config option jmx.WindowCacheStats = true
in the user or system level git config.
Bug: 553573
Change-Id: Ia2d5246ef69b9c2bd594a23934424bc5800774aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- filter errors for new APIs added in service release
- remove unused filters
Change-Id: Ifbf532b8a3c46d4ed78a38f6c75073a072b7f669
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
# By Matthias Sohn (2) and Saša Živkov (1)
* stable-5.1:
Prepare 5.1.13-SNAPSHOT builds
JGit v5.1.12.201910011832-r
Do not rely on ArrayIndexOutOfBoundsException to detect end of input
Change-Id: Iaae4b171eaa0081f9142489de8df94ab455d65f7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In the Config#StringReader we relied on ArrayIndexOutOfBoundsException
to detect the end of the input. Creation of exception with (deep) stack
trace can significantly degrade performance in case when we read
thousands of config files, like in the case when Gerrit reads all
external ids from the NoteDb.
Use the buf.length to detect the end of the input.
Change-Id: I12266f25751373a870ce3fa623cf2a95d882d521
Older JGit stored only milliseconds timestamps in the index. Newer
JGit may get finer timestamps from the file system. This leads to
slow index diffs when a new JGit runs against an index produced
by older JGit because many timestamps will differ and JGit will
then do many content checks. See [1].
Handle this migration case by only comparing milliseconds if the
index entry has only millisecond precision.
The inverse may also occur; also compare only milliseconds if the
file timestamp has only millisecond precision.
Do the same also for microsecond resolution. On Windows, NTFS may
provide 100ns resolution and may be used by external programs writing
the index, but Java's WindowsFileAttributes may provide only
microseconds.
File timestamp precision in Java depends not only on the Java APIs
used by different JGit versions but may also change when running the
same Java code on different VMs. And of course the resolution may
vary among operating and file systems. Moreover, timestamp precision
in the index depends on the program that wrote the index. Canonical
git may use a different resolution, maybe even different between git
versions.
[1] https://www.eclipse.org/forums/index.php/t/1100344/
Change-Id: Idfd08606c883cb98787b2138f9baf0cc89a57b56
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If CheckStat is MINIMAL or timestamps have no nanosecond part
WorkingTreeIterator.compareMetaData only checks the second part of
timestamps and ignores nanoseconds which may have ended up in the index
by using native git.
If
fileLastModified.getEpochSecond() == cacheLastModified.getEpochSecond()
we currently proceed comparing fileLastModified and cacheLastModified
with full precision which is wrong since we determined that we detected
reduced timestamp resolution.
Fix this and also handle smudged index entries for CheckStat.MINIMAL.
Change-Id: I6149885903ac63d79b42d234cc02aa4e19578f3c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We don't need to update time atomically since it's only used to order
cache entries in LRU order.
Change-Id: I756fa6d90b180c519bf52925f134763744f2c1f1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.1:
Bazel: Fix warning about deprecated lib.bzl
Format lib/BUILD with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Bump minimum supported version to 0.29.0
Bazel: Bump skylib library version to 0.8.0
Use bazelisk to switch between used bazel version
Bazel: Require minimum bazel version 0.17.1
Fix wrong placeholder index in error message packInaccessible
JGitText: Remove unused externalized strings
RepoText: Remove unused externalized string
CLI: Remove unused externalized strings
Change-Id: Iea37a8e39e9d4872dc607c9222dcf191ce4e4757
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.1:
Prepare 5.1.12-SNAPSHOT builds
JGit v5.1.11.201909031202-r
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: Iac5dc9683cea97db04d20f27c10f2e103d3ae7b5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.0:
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: I172136a031ff0730e575327cafb3527c9650a71d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.11:
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: Ifb6a4dbea2f48fd2ffa66eb737d61920aefedfbd
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.10:
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: If672b4f0c350f4e8ff7e1e706485cffd8137236d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.9:
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: Id5bf44645655fca40ad22bb1f1ad20a7c2e8f6db
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
PackedBatchRefUpdate was creating a new packed-refs list that was
potentially unsorted. This would be papered over when the list was
read back from disk in parsePackedRef, which detects unsorted ref
lists on reading, and sorts them. However, the BatchRefUpdate also
installed the new (unsorted) list in-memory in
RefDirectory#packedRefs.
With the timestamp granularity code committed to stable-5.1, we can
more often accurately decide that the packed-refs file is clean, and
will return the erroneous unsorted data more often. Unluckily timed
delays also cause the file to be clean, hence this problem was
exacerbated under load.
The symptom is that refs added by a BatchRefUpdate would stop being
visible directly after they were added. In particular, the Gerrit
integration tests uses BatchRefUpdate in its setup for creating the
Admin group, and then tries to read it out directly afterward.
The tests recreates one failure case. A better approach would be to
revise RefList.Builder, so it detects out-of-order lists and
automatically sorts them.
Fixes https://bugs.eclipse.org/bugs/show_bug.cgi?id=548716 and
https://bugs.chromium.org/p/gerrit/issues/detail?id=11373.
Bug: 548716
Change-Id: I613c8059964513ce2370543620725b540b3cb6d1
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.1:
Return a new instance from openSystemConfig and openUserConfig
Change-Id: I93afa16b14e3e2d127705e3378fb703d6c329694
Signed-off-by: Jonathan Nieder <jrn@google.com>
Move the handling of cached user and system config to getSystemConfig
and getUserConfig methods and revert the implementation of
openSystemConfig and openUserConfig to the old stateless
implementation.
This ensures the open methods respect the passed-in parent config, which
may be different on each invocation. Additionally, returning a new
instance matches the behavior of the previous implementation of the
default system reader, which downstream callers may be depending on.
Move the implementation of the new caching methods getSystemConfig and
getUserConfig up to SystemReader. This avoids that we break the ABI for
subclasses of SystemReader.
Also see [1] which fixed a similar problem with Gerrit's custom
SystemReader.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/225458
Change-Id: If54a2491932d8fc914d4649cb73c9e837c5b8ad0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.1:
Prepare 5.1.11-SNAPSHOT builds
JGit v5.1.10.201908230655-r
Use AtomicReferences to cache user and system level configs
Fix copy-paste typo in CloneCommand#cleanup
Change-Id: Ie383633de334e65901ed4c6deb2d59cfcce98e16
This ensures that only one instance of user and one instance of system
config is set.
Change-Id: Idd00150f91d2d40af79499dd7bf8ad5940f87c4e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
deleteChildren was called on directory instead of gitDir, leading to a
potential null pointer exception if the git directory existed initially.
Bug: 550340
Change-Id: Iafc3b2961253a99862a59e81c7371f7bc564b412
Signed-off-by: Adrien Bustany <adrien-xx-eclipse@bustany.org>
* stable-5.1:
Add missing @since tag on FileTreeIterator#getLastModifiedInstant
Prepare 5.1.10-SNAPSHOT builds
JGit v5.1.9.201908210455-r
Avoid sign extension when comparing mtime with Instant#getEpochSecond
Fix deprecation in DirCache caused by Instant based DirCacheEntry
Change-Id: Id824c0b8b14dad5947ae9da1f90c3471e07b400f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Ensure we use the same type when comparing seconds since the epoch.
This does not prevent that in 2038 timestamps in seconds since the epoch
stored in a 32 bit integer will overflow. Integer.MAX_VALUE translates
to 2038-01-19T03:14:07Z. After this date we'll have an issue since we
store seconds since the epoch in a 32 bit integer in some places.
Bug: 319142
Change-Id: If0c03003d40b480f044686e2f7a2f62c9f4e2fe1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Replace the two int variables smudge_s and smudge_ns by an Instant and
use the new method DirCacheEntry.mightBeRacilyClean(Instant).
Change-Id: Id70adbb0856a64909617acf65da1bae8e2ae934a
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.1:
Fix NPE in RebaseTodoFile#parseComments
Fix NPE in ObjectIdOwnerMap#get
Fix NPE in CommitOnlyTest#getHead
FileUtils#lastModifiedInstant should not log error if path doesn't exist
Cache user global and system-wide git configurations
Avoid setup and saving FileStoreAttributes compete for ~/.gitconfig lock
Add missing dependencies for running FS_POSIXTest in Eclipse
Fix javadoc for SystemReader#getInstance
Improve retry handling when saving FileStoreAttributes fails
Ensure FSTest uses MockSystemReader
Make supportsAtomicCreateNewFile return true as default
Update orbit to R20190602212107-2019-06 to enable backports from master
Handle InvalidPathException in FS_POSIX#createNewFileAtomic
Ensure root cause of lock creation failures is logged
Implement toString in MockSystemReader and MockConfig
LocalDiskRefTreeDatabaseTest shall use MockSystemReader
Ensure LocalDiskRepositoryTestCase#setup fully uses MockSystemReader
Ensure we use MockSystemReader in tests
Override FileBasedConfig's save method in MockConfig
Remove FileBasedConfig.load(boolean) introduced in d45219ba
Disable debug log for FS in org.eclipse.jgit.test
Bazel: enable logging for tests in org.eclipse.jgit.test
LockFile: log exception if creation of lock file failed
Stop using deprecated Constants.CHARACTER_ENCODING
Change-Id: I48c585f3c9287be7d6ddb6b01a1955444e13fa31
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>