To enable persisting the minimal racy threshold per FileStore add a
new config option to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vendor")
- Java version (system property "java.version")
- FileStore's name, on Windows we use the attribute volume:vsn instead
since the name is not necessarily unique.
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The same prefix is used as for filesystem timestamp resolution, so
both values are stored in the same config section
- The config key for minmal racy threshold is "minRacyThreshold" as a
time value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
- measure for 3 seconds to limit runtime which depends on hardware, OS
and Java version being used
If the minimal racy threshold is configured for a given FileStore the
configured value is used instead of measuring it.
When the minimal racy threshold was measured it is persisted in the user
global git configuration.
Rename FileStoreAttributeCache to FileStoreAttributes since this class
is now declared public in order to enable exposing all attributes in one
object.
Example:
[filesystem "AdoptOpenJDK|11.0.3|/dev/disk1s1"]
timestampResolution = 7000 nanoseconds
minRacyThreshold = 3440 microseconds
Change-Id: I22195e488453aae8d011b0a8e3276fe3d99deaea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
By running FileSnapshotTest#detectFileModified we found that the sum of
measured filesystem timestamp resolution and measured clock resolution
may yield a too small interval after a file has been modified which we
need to consider racily clean. In our tests we didn't find this behavior
on all systems we tested on, e.g. on MacOS using APFS and Java 8 and 11
this effect was not observed.
On Linux (SLES 15, kernel 4.12.14-150.22-default) we collected the
following test results using Java 8 and 11:
In 23-98% of 10000 test runs (depending on filesystem type and Java
version) the test failed, which means the effective interval which needs
to be considered racily clean after a file was modified is larger than
the measured file timestamp resolution.
"delta" is the observed interval after a file has been modified but
FileSnapshot did not yet detect the modification:
"resolution" is the measured sum of file timestamp resolution and clock
resolution seen in Java.
Java version filesystem failures resolution min delta max delta
1.8.0_212-b04 btrfs 98.6% 1 ms 3.6 ms 6.6 ms
1.8.0_212-b04 ext4 82.6% 3 ms 1.1 ms 4.1 ms
1.8.0_212-b04 xfs 23.8% 4 ms 3.7 ms 3.9 ms
1.8.0_212-b04 zfs 23.1% 3 ms 4.8 ms 5.0 ms
11.0.3+7 btrfs 98.1% 3 us 0.7 ms 4.7 ms
11.0.3+7 ext4 98.1% 6 us 0.7 ms 4.7 ms
11.0.3+7 xfs 98.5% 7 us 0.1 ms 8.0 ms
11.0.3+7 zfs 98.4% 7 us 0.7 ms 5.2 ms
Mac OS
1.8.0_212 APFS 0% 1 s
11.0.3+7 APFS 0% 6 us
The observed delta is not distributed according to a normal gaussian
distribution but rather random in the observed range between "min delta"
and "max delta".
Run this test after measuring file timestamp resolution in
FS.FileAttributeCache to auto-configure JGit since it's unclear what
mechanism is causing this effect.
In FileSnapshot#isRacyClean use the maximum of the measured timestamp
resolution and the measured "delta" as explained above to decide if a
given FileSnapshot is to be considered racily clean. Add a 30% safety
margin to ensure we are on the safe side.
Change-Id: I1c8bb59f6486f174b7bbdc63072777ddbe06694d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This helps to avoid some time critical tests can't prepare the test
fixture intended since measuring timestamp resolution takes time.
Change-Id: Ib34023e682a106070ca97e98ef16789a4dfb97b4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This is an attempt to fix crashes observed on the new Jenkins
infrastructure running on Kubernetes [1].
Increase it to 512m for
- org.eclipse.jgit.ant.test
- org.eclipse.jgit.http.test
- org.eclipse.jgit.lfs.server.test
- org.eclipse.jgit.lfs.test
- org.eclipse.jgit.pgm.test
Decrease it to 768m for
- org.eclipse.jgit.test
[1] e.g. https://ci-staging.eclipse.org/jgit/job/stable/job/jgit.gerrit/16074/console
Change-Id: Id074ed0f7bcb8a13da649a547342af2a08439d9f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit e19e859977)
The version is 4.5.5 in the master pom.xml but overridden with 4.3.6
in the LFS server tests pom.xml.
Remove the override so that the same version is used everywhere.
Change-Id: Ibccc93a0c2a9c05db23cf131585184d67611b579
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Remove it from
* package private functions.
* try blocks
* for loops
this was done with the following python script:
$ cat f.py
import sys
import re
import os
def replaceFinal(m):
return m.group(1) + "(" + m.group(2).replace('final ', '') + ")"
methodDecl = re.compile(r"^([\t ]*[a-zA-Z_ ]+)\(([^)]*)\)")
def subst(fn):
input = open(fn)
os.rename(fn, fn + "~")
dest = open(fn, 'w')
for l in input:
l = methodDecl.sub(replaceFinal, l)
dest.write(l)
dest.close()
for root, dirs, files in os.walk(".", topdown=False):
for f in files:
if not f.endswith('.java'):
continue
full = os.path.join(root, f)
print full
subst(full)
Change-Id: If533a75a417594fc893e7c669d2c1f0f6caeb7ca
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
DirCacheCheckout has a warning about non-localised string "lfs". Other
classes use org.eclipse.jgit.lfs.lib.Constants but that is not visible
to DirCacheCheckout.
Add a new constant in ConfigConstants and use that in DirCacheCheckout.
Replace existing uses of org.eclipse.jgit.lfs.lib.Constants.LFS with
the new constant, except where it is referring to the folder name.
Change-Id: I0f21b951babff9a2e579d68c4de0c62ee4bc23d4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Enable LFS support for the CLI by registering the according filters.
Errors during filter creation must be propagated up the call stack, as a
failure to create a filter should be treated as fatal if the filter is
required.
Change-Id: I3833757839bdda97cd01b6c21c1613d199e2692d
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Respect merge=lfs and diff=lfs attributes where required to replace (in
memory) the content of LFS pointers with the actual blob content from
the LFS storage (and vice versa when staging/merging).
Does not implement general support for merge/diff attributes for any
other use case apart from LFS.
Change-Id: Ibad8875de1e0bee8fe3a1dffb1add93111534cae
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If JGit built in LFS support is enabled for the current repository (or
user/system), any existing pre-push hook will cause an exception for the
time beeing, as only a single pre-push hook is supported.
Thus either native pre-push hooks OR JGit built-in LFS support may be
enabled currently, but not both.
Change-Id: Ie7d2b90e26e948d9cca3d05a7a19489488c75895
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Transfer data in chunks of 8k Transferring data byte per byte is slow,
running checkout with CleanFilter on a 2.9MB file takes 20 seconds.
Using a buffer of 8k shrinks this time to 70ms.
Also register the filter commands in a way that the native GIT LFS can
be used alongside with JGit.
Implements auto-discovery of LFS server URL when cloning from a Gerrit
LFS server.
Change-Id: I452a5aa177dcb346d92af08b27c2e35200f246fd
Also-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
There are several different version ranges specified in the various
manifest files.
Align them all to the same range: [4.12,5.0.0)
Change-Id: I02205b8b8546c9f53ed431b5fd9abf6ddcda4423
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The message is formatted as:
Invalid pathInfo '/abc' does not match '/{SHA-256}'
but should be:
Invalid pathInfo: '/abc' does not match '/{SHA-256}'
(i.e. including a colon) to be consistent with other messages.
Change-Id: Ic38aa7d33dd02d7954b95c331a73919a90c69991
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The message is formatted as:
Invalid id: : abcde...
but should be:
Invalid id: abcde...
Change-Id: Ie15cacdcf2f168edaee262e6cf8061ebfe9d998d
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Pretty printing the response is useful for human readers, but most
(if not all) of the time, the response will be read by programs.
Remove it to avoid the additional overhead of the formatting and
extra bytes in the response. Adjust the test accordingly.
Note that LfsProtocolServlet already doesn't use pretty printing,
so this change makes FileLfsServlet's behavior consistent. In fact,
both classes now have duplicate Gson handling; this will be cleaned
up in a separate change.
Change-Id: I113a23403f9222f16e2c0ddf39461398b721d064
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.9:
Ignore warning for minor version change without API change
Silence boxing warning
Prepare 4.5.5-SNAPSHOT builds
JGit v4.5.4.201711221230-r
Fix LockFile semantics when running on NFS
Honor trustFolderStats also when reading packed-refs
Prepare 4.5.4-SNAPSHOT builds
JGit v4.5.3.201708160445-r
Change-Id: Icc33d2e36f140e8714fce088379673a8834ae9de
- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>