- build-helper-maven-plugin to 3.2.0
- jacoco-maven-plugin to 0.8.7
- maven-antrun-plugin to 3.0.0
- maven-dependency-plugin to 3.2.0
- maven-enforcer-plugin to 3.0.0
- maven-jar-plugin to 3.2.0
- maven-javadoc-plugin to 3.3.1
- maven-jxr-plugin to 3.1.1
- maven-pmd-plugin to 3.15.0
- maven-project-info-reports-plugin to 3.1.2
- maven-resources-plugin to 3.2.0
- maven-shade-plugin to 3.2.4
- maven-site-plugin to 3.9.1
- maven-source-plugin to 3.2.1
- maven-surefire-plugin to 3.0.0-M5
- spotbugs-maven-plugin to 4.3.0
- tycho and tycho-extras to 1.7.0
Change-Id: I7738fbfd7db60ddbeb372efcb4c72c71112ac231
Return immediately in scanRef if the loose ref was identified as
missing when a snapshot was attempted for the ref. This will help
performance of scanRef when the ref is packed but has a corresponding
empty dir in 'refs/'.
For example, consider the case where we create 50k sharded refs in
a new namespace called 'new-refs' using an atomic 'BatchRefUpdate'.
The refs are named like 'refs/new-refs/01/1/1', 'refs/new-refs/01/1/2',
'refs/new-refs/01/1/3' and so on. After the refs are created, the
'new-refs' namespace looks like below:
$ find refs/new-refs -type f | wc -l
0
$ find refs/new-refs -type d | wc -l
5101
At this point, an 'exactRef' call on each of the 50k refs without
this change takes ~2.5s, where as with this change it takes ~1.5s.
Change-Id: I926bc41b9ae89a1a792b1b5ec9a17b05271c906b
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Doing a getFileStoreAttributes call even when the file doesn't
exist is unnecessary. This call is particularly slow on some
filesystems. Instead, do it only when the file exists and load
the appropriate cache.
This update can help speed up RefDirectory.exactRef when the ref
is packed, but has a corresponding empty dir for it under 'refs/'.
This scenario can happen when an atomic 'BatchRefUpdate' creates
new sharded refs.
For example, consider the case where we create 50k sharded refs in
a new namespace called 'new-refs' using an atomic 'BatchRefUpdate'.
The refs are named like 'refs/new-refs/01/1/1', 'refs/new-refs/01/1/2',
'refs/new-refs/01/1/3' and so on. After the refs are created, the
'new-refs' namespace looks like below:
$ find refs/new-refs -type f | wc -l
0
$ find refs/new-refs -type d | wc -l
5101
At this point, an 'exactRef' call on each of the 50k refs without
this change takes ~30s, where as with this change it takes ~2.5s.
Change-Id: I4a5d4c6a652dbeed1f4bc3b4f2b2f1416f7ca0e7
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
- the old jetty releases were moved to the archive server
- use https
- use eclipse 4.9 release repository
Change-Id: I2ca20dd828a9272a383e166e6ad82390415891cf
* stable-5.2:
[test] Create keystore with the keytool of the running JDK
Change-Id: I981de862c614986a7b443fed1cce7b895b758682
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.1:
[test] Create keystore with the keytool of the running JDK
Change-Id: Ic56f4f23c37432377be88e07d06c5ad75591d84f
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Call keytool with the absolute path of "java.home". Otherwise a keytool
for a different, maybe even newer Java version might be picked up, and
then the keystore may not be readable by the JVM used to run the tests.
(cherry picked from commit 2d73c702d3)
Change-Id: Iea77024947a34267f008847d81312fe0abadc615
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Rather than getting all ref names and prefixes and saving them
in memory to perform the check for conflicting names, rely on
RefDirectory.isNameConflicting as it is no longer an expensive
call after it was optimized in Ie994fc.
The old optimization to save ref names and prefixes in memory
was targeted towards making clones faster. With this change,
the clone performance is unaffected when tests were done with
repos containing many(~500k) refs.
Here are few recorded elapsed times for creating 10 branches
using BatchRefUpdate on NFS based repositories with varying
loose refs count. As seen here, this change helps improve the
BatchRefUpdate performance from O(n^2) to O(1).
loose_refs_count with_change without_change
50 241 ms 310 ms
300 263 ms 1502 ms
1k 181 ms 4241 ms
2k 204 ms 6440 ms
9k 158 ms 25930 ms
20k 154 ms 60443 ms
50k 171 ms 135199 ms
110k 157 ms 329450 ms
160k 209 ms 396328 ms
This update improves the Gerrit notedb migration performance
as it uses BatchRefUpdate to write change meta refs similar to
the test performed above.
Change-Id: I853ac6c7feb4b39c3156c01876b38cbd182accfe
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Update tests to record the number of events fired post-setup and only
assert for events fired during BatchRefUpdate.execute. For tests which
use writeLooseRef to setup refs, create new tests which assert the
number of RefsChangedEvent(s) rather than updating the existing ones
to call RefDirectory.exactRef as it changes the code path.
Change-Id: I0187811628d179d9c7e874c9bb8a7ddb44dd9df4
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Avoid having to scan over ALL loose refs to determine if the
name is nested within or is a container of an existing reference.
This can get really expensive if there are too many loose refs.
Instead use exactRef and getRefsByPrefix which scan based on a
prefix.
With a simple shell script(like below) using jgit client to create
1k refs in a new repository on NFS, this change brings down the time
from 12mins to 7mins.
for ref in $(seq 1 1000); do
jgit branch "$ref"
done
Here are few recorded elapsed times to create a new branch on NFS
based repositories with varying loose refs count. As we see here,
this change improves the name conflicting check from O(n^2) to O(1).
loose_refs_count with_change without_change
50 44 ms 164 ms
300 45 ms 1193 ms
1k 38 ms 2610 ms
2k 44 ms 6003 ms
9k 46 ms 27860 ms
20k 45 ms 48591 ms
50k 51 ms 135471 ms
110k 43 ms 294252 ms
160k 52 ms 430976 ms
Change-Id: Ie994fc184b8f82811bfb37b111eb9733dbe3e6e0
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
- bazlets need to be updated to react on Maven central no longer
supporting http protocol but only https
- update bazel to 2.0
Change-Id: I07f5f050f3b1db2014a5198a28b6bbf893434814
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit d74daad1e0)
We are running several servers with jGit. We need to run repack from
time to time to keep the repos performant. I.e. after push we test how
many small packs are in the repo and when a threshold is reached we run
the repack.
After upgrading jGit version we've found that if someone does the clone
at the time repack is running the clone sometimes (not always) fails
because the repack removes .pack file used by the clone. Server
exception and client error attached.
I've tracked down the cause and it seems to be introduced between jGit
5.2 (which we upgraded from) and 5.3 and being caused by this commit:
Move throw of PackInvalidException outside the catch -
afef866a44
The problem is that when the throw was inside of the try block the last
catch block catched the exception and called openFailed(false) method.
It is true that it called it with invalidate = false, which is wrong.
The real problem though is that with the throw outside of the try block
the openFail is not called at all and the fields activeWindows and
activeCopyRawData are not set to 0. Which affects the later called tests
like: if (++activeCopyRawData == 1 && activeWindows == 0).
The fix for this is relatively simple keeping the throw outside of the
try block and still having the invalid field set to true. I did
exhaustive testing of the change running concurrent clones and pushes
indefinitely and with the patch applied it never fails while without the
patch it takes relatively short to get the error.
See: https://www.eclipse.org/lists/jgit-dev/msg04014.html
Bug: 569349
Change-Id: I9dbf8801c8d3131955ad7124f42b62095d96da54
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- log an error
- either there is no list or it is incomplete hence return immediately
Change-Id: Ieee5378ca06304056b9ccc30c1acd5f52360052d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If pack or index files are guarded by a pack lock (.keep file)
deleteOrphans() should not touch the respective files protected by the
lock file. Otherwise it may interfere with PackInserter concurrently
inserting a new pack file and its index.
The problem was caused by the following race.
All mentioned files are located in "objects/pack/".
File endings relevant in "pack" dir:
.pack
.keep
.idx
.bitmap
When ReceivePack receives a pack file it executes the following steps:
ReceivePack.service():
receivePackAndCheckConnectivity():
receivePack():
receive the pack
parse the pack, returns packLock (.keep file)
PackInserter.flush():
write tmpPck file: "insert_<random>.pack"
write tmpIdx file: "insert_<random>.idx"
real pack name: "pack-<SHA1>.pack"
real index name: "pack-<SHA1>.idx"
atomic rename tmpPack to realPack
atomic rename tmpIdx to tmpIdx
execute commands
unlock pack by removing .keep file
trigger auto gc if enabled
When PackInserter.flush() renames the temporary pack to the final
"pack-xxx.pack" file the temporary pack index file "insert_xxx.idx"
has no matching .pack file with the same base name for a short interval.
If deleteOrphans() ran during that interval it deduced the pack index
file was orphaned. Subsequently the missing pack index caused
MissingObjectExceptions since objects contained in the pack couldn't be
looked up anymore.
Bug: https://bugs.chromium.org/p/gerrit/issues/detail?id=13544
Change-Id: I559c81e4b1d7c487f92a751bd78b987d32c98719
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.2:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Add config constants for WindowCache configuration options
Change-Id: I790098be00ff3f9b8278d54ae4fb7c11311816e9
* stable-5.1:
Fix string format parameter for invalidRefAdvertisementLine
WindowCache: add metric for cached bytes per repository
pgm daemon: fallback to user and system config if no config specified
WindowCache: add option to use strong refs to reference ByteWindows
Change-Id: I741059a1d0d5950ab5bc16ec70352655ee926a24
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The externalized error message added in f4fc640 ("BasePackConnection:
Check for expected length of ref advertisement", Dec 18, 2019) uses a
malformed string format. Since there is only one formatting argument,
it should be referenced with '{0}' rather than '{1}'.
Change-Id: Ibda864dfb0bb902fe07ae4bba73117b212046e8a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Since ObjectDatabase and PackFile don't know their repository use the
packfile's grand-grand-parent directory as an identifier for the
repository the packfile resides in.
Remove metric for a repository if the number of cached bytes for the
repository drops to 0 in order to ensure the map of cached bytes per
repository doesn't contain repositories which have no data cached in the
WindowCache.
Change-Id: I969ab8029db0a292e7585cbb36ca0baa797da20b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn