Set GIT_DIR and GIT_WORK_TREE when calling hooks.
Bug: 541622
Change-Id: I6153d8a6a934ec37a3a5e7319c2d0e516f539ab7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The new dependency to mockito for JDKHttpConnectionTest wasn't added for
bazel test run.
Change-Id: Ie967b7152340a0b3e05cced7eadfd40af78d9995
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
After cloning a repo with a submodule, non-recursively, JGit would
encounter in its TreeWalk in IndexDiff:
* first, a missing gitlink (in index & HEAD, not in working tree)
* second, the untracked folder (not in index and head, in working tree)
As a result, it would report the submodule as missing. Canonical git
reports a clean workspace.
The root cause of this is that the path of a gitlink "x" did
not compare equal to the path of a tree "x" in JGit.
Correct Paths.compare() to account for that. If two paths are otherwise
equal, then let gitlinks match both trees and files. Matching trees
solves the bug. Matching files is necessary to handle the case where
the gitlink directory was replaced by a file; see the new test case
IndexDiffSubmoduleTest.testSubmoduleReplacedByFile(). Comparisons of
unequal paths are left untouched, so the sort order is unchanged.
After the fix, another bug(?) in WorkingTreeIterator became apparent:
with core.dirNoGitLinks = true, it was no longer possible to overwrite
a gitlink in the index. This is now fixed in WorkingTreeIterator.
Add new test cases for the bug itself and for some related cases
(submodule directory deleted or replaced by a file) in
IndexDiffSubmoduleTest. Add a test for missing files in IndexDiffTest,
and adapt the PathsTest to test matching gitlinks.
Bug: 467631
Change-Id: I0549d10d46b1858e5eec3cc15095aa9f1d5f5280
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
when multiple match options are given in git describe the result must
not depend on the order of the match options. JGit wrongly picked the
first match using the match options in the order they were defined. Fix
this by concatenating the streams of matching tags for all match options
and then choosing the first match on the concatenated stream sorted in
tie break order.
See https://git-scm.com/docs/git-describe#git-describe---matchltpatterngt
Change-Id: Id01433d35fa16fb4c30526605bee041ac1d954b2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
According to RFC 2616 [1] header field names are case insensitive.
Header fields defined as a comma separated list can have multiple header
fields with the same field name. Add a method to HttpConnection which
retrieves all values with a given header field name with the field name
compared case insensitive.
[1] https://tools.ietf.org/html/rfc2616#section-4.2"
Change-Id: I7f601b21cda99e84f43f866c7c7cb4cb0e3cf5c3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This partially reverts commit a551b646: revert the changes in
RawParseUtils.lineMap(). Forcing all blobs containing a NUL byte
as a single line causes blame to produce useless results as soon
as it hits any version containing a NUL byte.
Doing binary detection at this level also has the problem that the
user cannot control it. Not by setting the text attribute nor in any
other way.
This came up in bug 541036, where a Java source inadvertently
contained NUL bytes in strings. Even fixing this by using escapes
"\000" will not fix JGit's blame for this file because the past
versions will still contain the NUL byte.
Native git can blame that file from bug 541036 fine.
Added new tests verifying that blaming a text file containing a NUL
byte produces sensible results.
Bug: 541036
Change-Id: I8991bec88e9827cc096868c6026ea1890b6d0d32
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add tests for password and keyboard-interactive authentication.
Implement password authentication; the default provided by sshd
is non-interactive, which is not useful for JGit.
Make sure the CredentialsProvider gets reset on successive password
retrieval attempts. Otherwise it might always return the same non-
accepted password from a secure storage. (That one was discovered
by actually trying this via EGit; the JGit tests don't catch this.)
Change the default order of authentication mechanisms to prefer
password over keyboard-interactive. This is a mitigation for upstream
bug SSHD-866.[1]
Also include a fix for upstream bug SSHD-867.[2]
[1] https://issues.apache.org/jira/projects/SSHD/issues/SSHD-866
[2] https://issues.apache.org/jira/projects/SSHD/issues/SSHD-867
Bug: 520927
Change-Id: I423e548f06d3b51531016cf08938c8bd7acaa2a9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Create the bundle and move the SshTestGitServer there. Verified that
the Eclipse build still works and ran JSchSshTest and ApacheSshTest as
junit tests inside Eclipse.
Update maven build and features to account for that. Verified by
running full maven build including packaging.
Update bazel build files to account for that. Verified by a
clean-slate bazel build :all, followed by running the JSchSshTest
and the ApacheSshTest via bazel.
Change-Id: Ia084942f4425b454529de148e00417e7da786a90
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
sshd only asks exactly once for the password. C.f. upstream issue
SSHD-850.[1] So we have to work around this limitation for now.
Once we move to sshd > 2.1.0, this can be simplified somewhat.
[1] https://issues.apache.org/jira/browse/SSHD-850
Bug: 520927
Change-Id: Id65650228486c5ed30affa9c62eac982e01ae207
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
By default sshd will use its default built-in list, which matches
the one of openssh (as far as the algorithms exist in sshd at all).
But it doesn't handle HostKeyAlgorithms from the ssh config at all.
Implement this as in openssh, including the '+' and '-' modifiers
and reordering the default if there are known host keys for a
server already.
Add tests for the reordering.
Also use a more robust reader for the known hosts file. The default
aborts on the first error.
Bug: 520927
Change-Id: Ib1684440bfe2e96140536aa1a93c4bd4a0d35916
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Tests that it works with unknown authentications in the list, and
fails if there are no common authentications between server and
client. The latter also tests that the ssh config setting is taken
into account at all.
And promptly the JGit sshd client didn't. Add a fix for this. It's
a tiny bit hacky: Apache MINA looks up a custom property set on a
hierarchy of "PropertyResolver"s starting with the session. On the
session itself this property can never be set since it's read
already in the session constructor before anyone had any chance
to set it. The next element in the resolver hierarchy is the sshd
SshClient, and so we set that property there. Since we use one
SshClient and one ClientSession per JGit SshdSession, this is OK.
Bug: 520927
Change-Id: I62446fc1fffde125a8965c030240f0918ae234b7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a new ssh client implementation based on Apach MINA sshd 2.0.0.
This implementation uses JGit's own config file parser and host entry
resolver. Code inspection of the Apache MINA implementation revealed
a few bugs or idiosyncrasies that immediately would re-introduce bugs
already fixed in the past in JGit.
Apache MINA sshd is not without quirks either, and I had to configure
and override more than I had expected. But at least it was all doable
in clean ways.
Apache MINA boasts support for Bouncy Castle, so in theory this should
open the way to using more ssh key algorithms, such as ed25519.
The implementation is in a separate bundle and is still not used in
the core org.eclipse.jgit bundle. The tests re-use the ssh tests from
the core test bundle.
Bug: 520927
Change-Id: Ib35e73c35799140fe050d1ff4fb18d0d3596580e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add support for git-receive-pack to the ssh git server and add two
new tests for pushing.
This actually uncovered an undocumented requirement in TransportSftp:
the FTP rename operation assumes POSIX semantics, i.e., that the
target is removed. This works as written only for servers that
support and advertise the "posix-rename@openssh.com" FTP extension.
Our little Apache MINA server does not advertise this extension.
Fix the FtpChannel implementation for Jsch to handle this case in a
meaningful way so that it can pass the new "push over sftp" test.
Add more tests to test the behavior of server host key checking.
Also refactor the tests generally to separate better the test
framework from the actual tests.
Bug: 520927
Change-Id: Ia4bb85e17ddacde7b36ee8c2d5d454bbfa66dfc3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Correct behaviour as git 1.7.1.1 is to resolve tie-breakers to choose
the most recent tag.
https://github.com/git/git/blob/master/Documentation/RelNotes/1.7.1.1.txt:
* "git describe" did not tie-break tags that point at the same commit
correctly; newer ones are preferred by paying attention to the
tagger date now.
Bug: 538610
Change-Id: Ib0b2a301997bb7f75935baf7005473f4de952a64
Signed-off-by: Håvard Wall <haavardw@gmail.com>
Suppose that a repository has the following commit graph:
B C
\ /
A
and it was cloned with --shallow-exclude=A. DepthGenerator does not mark
C as shallow, causing an invalid repository to be produced on the
client, because A is not sent. (A similar issue occurs when
--shallow-since is used to exclude A but neither B nor C.)
This happens whenever an excluded commit has more than one child that is
to be sent to the client. Fix DepthGenerator to handle this case
correctly.
While we're editing DepthWalk.Commit, fix the documentation of
DepthWalk.Commit#isBoundary.
Change-Id: I7068abf0fe0c864d1b0e56e1616dad1aa8719411
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Move the bulk of the basic parsing and host entry handling into a
new class OpenSshConfigFile that has no dependencies on any concrete
ssh implementation. Make the existing OpenSshConfig use the new
parser.
Introduce a new class SshConstants collecting all the various ssh-
related string literals. Also use TreeMaps with a case-insensitive
key comparator instead of converting keys to uppercase. Add a test
to verify that keys are matched case-insensitively.
Most of the parsing code was simply moved, except that the new
parser supports looking up entries given host name, port, and user
name, and can thus handle more %-substitutions correctly. This
feature is not yet used and cannot be used with JSch since JSch
only has a ConfigRepository.getConfig(String) interface.
The split is still worth the trouble as it opens the way to using
another ssh client altogether. Apache MINA sshd, for instance,
resolves host entries giving host name, port, and user name.
(Apache MINA has a built-in ssh config handling, but that has
problems, too: its pattern matching is case-insensitive, and its
merging of host entries if several match is not the same as in
OpenSsh. But with this refactoring, it will be possible to plug in
OpenSshConfigFile into an Apache MINA sshd client without dragging
along JSch.)
One test case that doesn't make sense anymore has been removed. It
tested that repeatedly querying for a host entry returned the same
object. That is no longer true since the caching has been moved to
a deeper level.
Bug: 520927
Change-Id: I6381d52b29099595e6eaf8b05c786aeeaefbf9cc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a simple ssh git server based on Apache MINA sshd, and use it
in new tests that verify ssh operations and in particular a number
of bugs that had cropped up over time in JSch.
The git server supports fetching only, and sftp access.
The tests are all in an abstract base class; the concrete JschSshTest
class only provides ssh-specific test setup. So the same tests could
be run easily also with some other ssh client.
Bug: 520927
Change-Id: Ide6687b717fb497a29fc83f22b07390a26dfce1d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When a source folder is marked as a test folder, JDT requires that it
has an output folder different from the one used for regular sources.
Therefore give the test folders in org.eclipse.jgit.test a separate
output folder "bin-tst".
Moreover JDT reports errors if non-test classes have dependencies on
test classes. Therefore remove the "test" annotation from
org.eclipse.jgit.junit.
Change-Id: Ib527439ff5b7d7b570b8a60819ecaa70f59c63a3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The copyfile entry in the manifest file copies the contents of the file
but doesn't keep the executable flag. This is inconsistent with repo
tool behaviour, plus is natural to expect that the copy of a executable
file is executable.
Transfer the executable bit when copying the file, aligning the
RepoCommand with repo tool and user expectations.
Change-Id: I01b24f482d5939e01d496f032388b3a5c02a912a
Signed-off-by: Ivan Frade <ifrade@google.com>
The RepoCommand.RemoteReader interface doesn't offer access to the mode
of a file. Caller can only default to mark the copied objects as regular
files, losing e.g. the executable bit (if set).
Add a new method readFileWithMode that returns the contents and mode of
the remote file. It supersedes the readFile method, that is marked as
deprecated.
Now callers can set correctly the file mode of the copied file.
Change-Id: I8fce01e4bc5707434c0cbc4aebbae1b6b64756f0
Signed-off-by: Ivan Frade <ifrade@google.com>
Many tests verify the contents of files in a try-with-resources
incantation that clutters the code.
Extract that verification to an "assertContents" method, that is easier
to read.
Change-Id: If430eac6f5b9ae352e42b2d43867ceb6cd618fbb
Signed-off-by: Ivan Frade <ifrade@google.com>
Patterns should treat \r in file names as normal characters
Change-Id: Ica3e0fa4a58acf5326db46bb28571fe5f20f6cd2
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
ProtocolV2Parser has unit tests but protocol v0/v1 is not covered.
Change-Id: I96022e8f8eb60d4da748d1042474fd1efd67e882
Signed-off-by: Ivan Frade <ifrade@google.com>
Parsed requests represent object ids (SHA1) in ObjectId instances but tests
use strings for those ids because they are easier to define.
Create a custom matcher that hides the conversion from string to
ObjectId. Note that this reverses the existing code conversion (it was
transforming ObjectIds into string).
This produces more readable code, consistent with the other hamcrest
assertions.
Change-Id: I47ba1d25557d791fe74fb93c740ff7de9923cc00
Signed-off-by: Ivan Frade <ifrade@google.com>
This allows clients to use the --shallow-exclude parameter (producing a
"deepen-not <ref>" line when communicating with the server) in their fetch
commands when fetching against a JGit server using protocol v2.
Note that the implementation in this commit is somewhat inefficient, as
described in the TODO comment in DepthGenerator.
Change-Id: I9fad3ed9276b624d8f668356ffd99a067dc67ef7
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
In C Git, when a client fetches with "git fetch --shallow-since=<date>
origin <ref>", and all commits reachable from <ref> are older than
<date>, the server dies with a message "no commits selected for shallow
requests". That is, (1) the --shallow-since filter applies to the commit
pointed to by the ref itself, and (2) there is a check that at least one
commit is not filtered out. (The pack-protocol.txt documentation does
not describe this, but the C implementation does this.)
The implementation in commit 1bb430dc21 ("UploadPack: support
deepen-since in protocol v2", 2018-09-27) does neither (1) nor (2), so
do both of these.
Change-Id: I9946327a71627626ecce34ca2d017d2add8867fc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
The request receives a list of capabilities and takes out the "agent" to
offer it on its own setter (getAgent).
Do this at parse time: when reading the line if the capability is
"agent" set it directly in the builder.
This makes the treatment of "agent" consistent in v0/v1 and v2.
Change-Id: Ie4f9f2cad8639adeeaef4921df49a30a8ce5b42f
Signed-off-by: Ivan Frade <ifrade@google.com>
All of the input lines passed to pre-push hook scripts must be properly
terminated by '\n', so that normal shell scripts like the git-supplied
pre-push.sample work properly, even when pushing just a single branch.
With the old code, hook scripts that use the following pattern didn't
process the last line, because 'read' has a non-zero exit status when
EOF is encountered:
while read local_ref local_sha remote_ref remote_sha; do ... done
Change-Id: Id899662ed3fedef6c314fc4b2ddf91a6dcb98cbb
Signed-off-by: Markus Keller <markus.kell.r@gmail.com>
Before this commit, a force checkout would fail if there
were any conflicting files. After this commit, a force
checkout will overwrite the conflicting files, as expected.
Making this work required fixing a bug in DirCacheCheckout.
Before this commit, when DirCacheCheckout had
failOnConflict=false, it would delete all conflicting files
from the working copy and just leave them missing. After
this commit, DirCacheCheckout overwrites conflicting files
with the merge tree.
This change in DirCacheCheckout causes "reset --hard" and
"revert --abort" to behave as expected (previously they
would simply delete conflicting files, now they will be
overwritten from the merge tree).
Change-Id: If7e328ee792ef6511ab7d9c26d8d77c39210ec9f
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
UploadPack.getPeerUserAgent() doesn't produce the expected results for
protocol v2 requests. In v2, the agent reported in the request (in an
"agent=" line) is not in the clientCapabilities but in a field on its
own. This makes getPeerUserAgent default to the transport user agent.
Making "agent" a shared property between protocol v0/v1 and v2 fixes the
problem, simplifies the function and harmonizes the implementation
between protocol versions.
In a follow up commit the "agent" will be identified on parsing time,
instead of taking it from the client capabilities.
Change-Id: Idf9825ec4e0b81a1458c8e3701f3e28aafd8a32a
Signed-off-by: Ivan Frade <ifrade@google.com>
In protocol v2, a command request can be followed by server options
(lines like "agent=<>" and "server-option=<>"), but current code
doesn't accept those lines.
Advertise the "server-option" capability, parse the lines and add
them to the request objects.
Other code in JGit can see this options and act accordingly via the
protocol v2 hooks.
This should not require any change in the client side.
Change-Id: If3946390f9cc02d29644b6ca52534b6f757bda9f
Signed-off-by: Ivan Frade <ifrade@google.com>
Eclipse Photon supports separating sources and test sources.
There are no functional changes in the IDE, except for test source
folders having a different icon color.
Users of different IDEs than Eclipse are not affected, since the
attribute on the classpath entries will be ignored by their IDE.
Bug: 539933
Change-Id: Iac6dcdf0c0730ca775bae90df6a685303dc95380
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The code base has several @SuppressWarnings annotations to suppress
warnings raised by Error Prone, but those are not recognized by
Eclipse and there is currently no way to tell it about them [1].
Suppress them for now.
[1] https://bugs.eclipse.org/bugs/show_bug.cgi?id=392045
Change-Id: I3de7cfa8ad4370ca5be71e1303879c73ab6829c1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Error Prone reports that the unsynchronized method skip overrides the
synchronized method in ByteArrayInputStream [1].
This is a test class, so we can just suppress the warning as recommended
in [1].
Note that the suppression causes a warning in Eclipse, because it doesn't
recognize the "UnsynchronizedOverridesSynchronized" as a valid value for
the @SuppressWarnings annotation [2].
[1] https://errorprone.info/bugpattern/UnsynchronizedOverridesSynchronized
[2] https://bugs.eclipse.org/bugs/show_bug.cgi?id=392045
Change-Id: I3e798b448211f1363729091f72fb0ef6a873e599
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In FetchV0Request, the fields "wantsIds" and "options" are called
"wantIds" and "clientCapabilities". Those names describe them better.
Rename FetchV2Request fields to follow fetch v0. This will make easier
to extract a superclass later.
Take also the chance to polish the javadoc.
Change-Id: Ia17dbbab8084f39cc529fef9ca5c65e189073767
Signed-off-by: Ivan Frade <ifrade@google.com>
First-want line parsing accepts lines with an optional whitespace, when
the spec is strict requiring a white space.
Validate the line enforcing that there is a white space between oid and
capabilities list.
Change-Id: I45ada67030e0720f9b402c298be18c7518c799b1
Signed-off-by: Ivan Frade <ifrade@google.com>
In protocol v0/v1 pack negotiation, the first want line contains the
options the client wants in effect. This parsing is done in UploadPack
but it doesn't have any interaction with that class.
Move the code to its own class and package, mark the current one
as deprecated (it is public API) and add unit tests.
Take the chance to move the parsing code from the constructor to a
factory method, making the class a simple container of results.
Change-Id: I1757f535dda78a4111a1c12c3a3b455a4b6f0c51
Signed-off-by: Ivan Frade <ifrade@google.com>
Previous commits block the addition to the repo of dangerous .gitmodules
files, but some could have been committed before those safeguards where
in place.
Add a check in DfsFsck to validate the .gitmodules files in the repo.
Use the same validation than the ReceivePack, translating the
results to FsckErrors.
Note that *all* .gitmodules files in the storage will be checked, not
only the latest version.
Change-Id: I040cf1f31a779419aad0292ba5e6e76eb7f32b66
Signed-off-by: Ivan Frade <ifrade@google.com>
The fsck test needs more detail about the error than an IOException
with an explanatory message.
Add an error identifier to the SubmoduleValidatorException and make
it the only throwable exception when parsing a file.
Change-Id: Ic3f0955b497e1681b25e681e1282e876cdf3d2c5
Signed-off-by: Ivan Frade <ifrade@google.com>
The main concern are submodule urls starting with '-' that could pass as
options to an unguarded tool.
Pass through the parser the ids of blobs identified as .gitmodules
files in the ObjectChecker. Load the blobs and parse/validate them
in SubmoduleValidator.
Change-Id: Ia0cc32ce020d288f995bf7bc68041fda36be1963
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In order to validate .gitmodules files, we first need to find them
in the incoming pack.
Do it in the ObjectChecker stage. Check in the tree objects if they
point to a .gitmodules file and report the tree id and the .gitmodules
blob id.
This can be used later to check if the file is in the root of the
project and if the contents are good.
While we're here, make isMacHFSGit more accurate by detecting variants
of filenames that vary in case.
[jn: tweaked NTFS and HFS+ checking; added more tests]
Change-Id: I70802e7d2c1374116149de4f89836b9498f39582
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In C git versions before 2.19.1, the submodule is fetched by running
"git clone <uri> <path>". A URI starting with "-" would be interpreted
as an option, causing security problems. See CVE-2018-17456.
Refuse to add submodules with URIs, names or paths starting with "-",
that could be confused with command line arguments.
[jn: backported to JGit 4.7.y, bringing portions of Masaya Suzuki's
dotdot check code in v5.1.0.201808281540-m3~57 (Add API to specify
the submodule name, 2018-07-12) along for the ride]
Change-Id: I2607c3acc480b75ab2b13386fe2cac435839f017
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
EolStreamTypeUtil didn't handle these correctly on Windows.
Add three new tests to verify that the crlf attribute is handled as
described at [1], and that core.eol=native produces the expected
line endings on check-out.
[1] https://git-scm.com/docs/gitattributes
Bug: 497290
Change-Id: Idd9b435e3256c1e3251cc7b966f2f0460e787f07
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This probably doesn't provide any benefit for the tests, but gets
rid of a warning from Error Prone.
See https://errorprone.info/bugpattern/InputStreamSlowMultibyteRead
Change-Id: I584d2e0d18475fad38747b688af6301c423f54a7
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Deprecate constructors and methods taking a character set name as
a String, in favor of new variants taking a Charset.
Change-Id: I616c601daf232fa17610dba1087fd902030d46ea
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Error Prone reports:
Not calling fail() when expecting an exception masks bugs
See https://errorprone.info/bugpattern/MissingFail
Change-Id: I58ad45a87dcf7d646dce056d20776d62faafbfef
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Error Prone reports:
Not calling fail() when expecting an exception masks bugs
See https://errorprone.info/bugpattern/MissingFail
Change-Id: I518b524de7cd3802f03b80450cad02ab3f79d57b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Error Prone reports:
Not calling fail() when expecting an exception masks bugs
See https://errorprone.info/bugpattern/MissingFail
Change-Id: Ic89f9daef3c31bfbfd1f3c003cb90a373cd74847
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Error Prone reports:
Not calling fail() when expecting an exception masks bugs
See https://errorprone.info/bugpattern/MissingFail
Change-Id: I463510342bb6e6b99b31a0fe264d953340784393
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The tests were set up to expect an IllegalArgumentException when
the Config.getInt method was called with a section.key that has
not been set, or explicitly set to an empty string.
However, the IllegalArgumentException never gets thrown because
the getInt method returns the provided default ("1"), and because
there was no call to "fail" after getInt, the incorrect behavior
of the test was not noticed.
Remove the try/catch around getInt, and instead assert that the
expected default value is returned.
Found by Error Prone, which reported:
Not calling fail() when expecting an exception masks bugs
See https://errorprone.info/bugpattern/MissingFail
Change-Id: Ie8e692aba9fb8523241fb8f298d57493923d9f78
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Support the deepen-since parameter when requested by a client using
protocol v2. This is done by:
- adding a DepthWalk.RevWalk#setDeepenSince method
- updating DepthGenerator to recognize when deepen-since is set
- recording in DepthWalk.Commit whether a commit is a boundary commit
Existing users of DepthWalk such as UploadPack previously recognized
boundary commits by comparing their depths against the threshold, not
tracking whether any parents were truly excluded. This behavior is
preserved - UploadPack considers a commit as boundary if its depth is
equal to the threshold *or* a parent was excluded (whether by depth or
by deepen-since).
Change-Id: I852bba6b1279f9cc8aee38282e9339d62b8dcddc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
The BufferedWriter is opened in a try-with-resource and thus will be
automatically closed.
Presumably the close was added to make sure it is closed before the
subsequent test statements are executed. Instead of explicitly closing
it, let the try-with-resource automatically close it, and move the
subsequent statements out of the try-block.
Change-Id: If5fada2f580ef9cbaad3a0b9216b5200b917781a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Replace explicit construction of FileWriter with calls to the
utility method Files.newBufferedWriter, which allows to specify
the charset.
Also convert to try-with-resource.
Change-Id: I9fa3f612b9b2fc5ac12cd79d6e61ca181120dbf5
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Replace explicit construction of BufferedReader with calls to the
utility method Files.newBufferedReader, which allows to specify
the charset.
Change-Id: I61b9451dbc8d9cf83fc8a5981292b8fdc713ce37
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
As reported by Error Prone:
An inner class should be static unless it references members of its
enclosing class. An inner class that is made non-static unnecessarily
uses more memory and does not make the intent of the class clear.
See https://errorprone.info/bugpattern/ClassCanBeStatic
Change-Id: Ib99d120532630dba63cf400cc1c61c318286fc41
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
There should only be one statement after the expect(...) method.
Any additional statements after the statement that is expected to
throw will never be executed in a passing test. This can lead to
inappropriately passing tests where later incorrect assertions are
skipped by the thrown exception.
See https://errorprone.info/bugpattern/ExpectedExceptionChecker
Change-Id: I20fecf8fb7a243e9da097e6d03fbf8cd69151bf0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
There should only be one statement after the expect(...) method.
Any additional statements after the statement that is expected to
throw will never be executed in a passing test. This can lead to
inappropriately passing tests where later incorrect assertions are
skipped by the thrown exception.
See https://errorprone.info/bugpattern/ExpectedExceptionChecker
Change-Id: I0d6350fafb281b6bdb04289f4cd5eb4bb159628b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Support multiple prefixes when querying references to allow
implementor to minimize number of RPC calls.
Change-Id: I5f822fd7eaf9756b44750080d3056de138b64f4a
Signed-off-by: Minh Thai <mthai@google.com>
The commit message template contains a superfluous blank at the end of
the first line, which is deleted by this change. This is only relevant
for jgit contributors using Eclipse, not for jgit users.
Change-Id: I462deb49c26fb64b3dc2d1d75f1e40ef302b0fc9
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Otherwise fetching all tags may pull in commits not on the
specified branches. Canonical git also does this.[1]
[1] https://github.com/git/git/blob/b160b6e69/builtin/clone.c#L1124
Bug: 538768
Change-Id: If0ac75fb9fae0c95d1a48b22954c54d4c3c09a47
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When not all branches are cloned, the fetch refspec for the
remote should not be "+refs/heads/*:refs/remotes/origin/*":
that would fetch all branches on the very next fetch, thus
making a clone with only a subset of the branches rather
pointless.
Instead, produce refspecs for the cloned branches only.
Canonical git also does this for its --single-branch case;
it doesn't have an option to clone only a subset of the branches
(only one or all).
Bug: 466858
Change-Id: Ie871880f757663437efac1e8b3313094f9e629b3
Also-by: Julian Enoch <julian.enoch@ericsson.com>
Signed-off-by: Julian Enoch <julian.enoch@ericsson.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fetch code has been moved to a ProtocolV2Parser, but ls-refs code is
still in UploadPack.
Moving it to the parser makes it easier to test, keeps the parsing
together and makes the two commands follow similar structure.
Change-Id: I573ce543e804ddeb9f83303b4af250b7cddc8cad
Signed-off-by: Ivan Frade <ifrade@google.com>
Also check that reflog is enabled by default.
Also check that a file in a folder is reset correctly.
Change-Id: I4bc6649928ce10d7b558901e465e8032b083ade0
Signed-off-by: René Scheibe <rene.scheibe@gmail.com>
The statement:
assertThat(recvStream.available(), is(0));
results in a warning from Eclipse:
The expression of type int is boxed into Integer
because recvStream.available() returns int, but the hamcrest is()
method takes an Integer.
Replace it with the equivalent JUnit assertion.
Also remove the suppression of another similar warning and fix that
in the same way.
Change-Id: I6f18b304a540bcd0a10aec7d3abc7dc6f047fe80
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In order to support GPG-signed commits, add some methods which will
allow GPG signatures to be parsed out of RevCommit objects.
Later, we can add code to verify the signatures.
Change-Id: Ifcf6b3ac79115c15d3ec4b4eaed07315534d09ac
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use existing test utility methods instead of nested PrintWriter usage.
Change-Id: I324852c7971ae644fa499f377a31d1cf265c7fd9
Signed-off-by: René Scheibe <rene.scheibe@gmail.com>
ErrorProne warns [1] about implicit use of the platform default charset,
which can result in differing behaviour between JVM executions or
incorrect behavior if the encoding of the data source doesn't match
expectations.
[1] http://errorprone.info/bugpattern/DefaultCharset
Change-Id: I0fd489d352170339c3867355cd24324dfdbd4b59
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Client will stop sending haves when the number of haves sent reaches maxhaves.
Change-Id: I1e5b1525be4c67f20a81ca24a2770c20eb5c1271
Signed-off-by: Minh Thai <mthai@google.com>
The parsing code for protocol v2 fetch doesn't have any dependency on
the rest of UploadPack.
Move it to its own class. This makes testing easier (no need to
instantiate the full UploadPack), simplifies the code in UploadPack and
increases modularity.
At the moment, the parser needs to know about the reference database to
validate incoming references. This dependency could be easily removed
moving the validation later in the flow, after the parsing, where other
validations are already happening. Postponing that to keep this patch
about moving unmodified code around.
Change-Id: I7ad29a6b99caa7c12c06f5a7f30ab6a5f6e44dc7
Signed-off-by: Ivan Frade <ifrade@google.com>
* stable-5.1:
Bazel: Use hyphen instead of underscore in external repository names
Bazel: Format all build files with buildifier 0.15.0
ChangeIdUtilTest: Remove unused notestCommitDashV
Change-Id: Ie9d77a7716591246b87fb59ac85214417fe8309d
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-5.0:
Bazel: Use hyphen instead of underscore in external repository names
Bazel: Format all build files with buildifier 0.15.0
ChangeIdUtilTest: Remove unused notestCommitDashV
Change-Id: I7c2fc7d694d7d891cac96cb805c89c8bdf7c5cbf
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.11:
Bazel: Use hyphen instead of underscore in external repository names
Bazel: Format all build files with buildifier 0.15.0
ChangeIdUtilTest: Remove unused notestCommitDashV
Change-Id: I5ebb1058927ea5a478eae9e44b7d96f123a22523
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.10:
Bazel: Use hyphen instead of underscore in external repository names
Bazel: Format all build files with buildifier 0.15.0
ChangeIdUtilTest: Remove unused notestCommitDashV
Change-Id: I500dd4e63302abb19ad669988b3a427cef8ef3d4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.9:
Bazel: Use hyphen instead of underscore in external repository names
Bazel: Format all build files with buildifier 0.15.0
ChangeIdUtilTest: Remove unused notestCommitDashV
Change-Id: I37e936de0c06d4b9f17724ac4f1feb83f6c15ae3
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.8:
Bazel: Use hyphen instead of underscore in external repository names
Bazel: Format all build files with buildifier 0.15.0
ChangeIdUtilTest: Remove unused notestCommitDashV
Change-Id: I17436237cd66ca1c2800ad5ab0142f4a2bc07328
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.7:
Bazel: Use hyphen instead of underscore in external repository names
Bazel: Format all build files with buildifier 0.15.0
ChangeIdUtilTest: Remove unused notestCommitDashV
Change-Id: I414ade902dc38b696c566dd604000e3d289f3973
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
At the moment there are two copies of the client shallow commit list:
one in the request and another in the clientShallowCommits member of
the class.
The verifyShallowCommit function was removing missing object ids
from the member but not the request list, and code afterwards was
using the request's version.
In practice, this didn't cause trouble because these shallow commits
are used as endpoint for a walk, and missing ids are just never reached.
Change-Id: I70a8f1fd46de135da09f16e5d954693c8438ffcb
Signed-off-by: Ivan Frade <ifrade@google.com>
This test was never being run. Since it was introduced it was
named "notest.." which meant it didn't run with JUnit3, and
since it is not annotated @Test it also doesn't run with JUnit4.
When compiling with Bazel 0.6.0, error-prone raises an error
that the public method is not annotated with @Ignore or @Test.
Given that the test has never been run anyway, we can just
remove it.
Bug: 525415
Change-Id: Ie9a54f89fe42e0c201f547ff54ff1d419ce37864
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-5.0:
Silence API warning for new ObjectIdSerializer introduced in 4.11.1
Ignore API warnings
Fix photon target platform to use photon version of org.eclipse.osgi
Update Photon orbit repository to R20180606145124
Suppress warning for trying to delete non-empty directory
Fix fetching with duplicate ref updates
Fetch(Process): should tolerate duplicate refspecs
FetchCommandTest: test add/update/delete fetch
Change-Id: I9e7fa37b100a7ea3cbe4104802d36c6f38df9e08
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.11:
Silence API warning for new ObjectIdSerializer introduced in 4.11.1
Ignore API warnings
Fix photon target platform to use photon version of org.eclipse.osgi
Update Photon orbit repository to R20180606145124
Suppress warning for trying to delete non-empty directory
Fix fetching with duplicate ref updates
Fetch(Process): should tolerate duplicate refspecs
FetchCommandTest: test add/update/delete fetch
Change-Id: I2497f99b7d0686a0e0f773c39c8725e813ce9d4a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.10:
Ignore API warnings
Fix photon target platform to use photon version of org.eclipse.osgi
Update Photon orbit repository to R20180606145124
Suppress warning for trying to delete non-empty directory
Fix fetching with duplicate ref updates
Fetch(Process): should tolerate duplicate refspecs
FetchCommandTest: test add/update/delete fetch
Change-Id: I47671108574fcd10fe016a58e38c038af54a6748
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Renamed and restructured tests for improved clarity.
Bug: 479266
Change-Id: Ic9d05ddf722bddd148fa9d9c19248dd53d97f1e4
Signed-off-by: René Scheibe <rene.scheibe@gmail.com>
* stable-4.9:
Ignore API warnings
Fix photon target platform to use photon version of org.eclipse.osgi
Update Photon orbit repository to R20180606145124
Suppress warning for trying to delete non-empty directory
Fix fetching with duplicate ref updates
Fetch(Process): should tolerate duplicate refspecs
FetchCommandTest: test add/update/delete fetch
Change-Id: I2a83c059b7014c2a9e6267c963422c7785b23f17
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On recent VMs, collection.toArray(new T[0]) is faster than
collection.toArray(new T[collection.size()]). Since it is also more
readable, it should now be the preferred way of collection to array
conversion.
https://shipilev.net/blog/2016/arrays-wisdom-ancients/
Change-Id: I80388532fb4b2b0663ee1fe8baa94f5df55c8442
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
If packed refs are used, duplicate updates result in an exception
because JGit tries to lock the same lock file twice. With non-atomic
ref updates, this used to work, since the same ref would simply be
locked and updated twice in succession.
Let's be more lenient in this case and remove duplicates before
trying to do the ref updates. Silently skip duplicate updates
for the same ref, if they both would update the ref to the same
object ID. (If they don't, behavior is undefined anyway, and we
still throw an exception.)
Add a test that results in a duplicate ref update for a tag.
Bug: 529400
Change-Id: Ide97f20b219646ac24c22e28de0c194a29cb62a5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Bug: 529314
Change-Id: I91eaeda8a988d4786908fba6de00478cfc47a2a2
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change-Id: I2442394fb7eae5b3715779555477dd27b274ee83
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The TransportLocal object created in
newTransportLocalWithStrictValidation() closes original repository and
increments use of test internal "dst" repository, but never decrements
use. Because of this, pack file is not closed and during tearDown on
Windows system is unable to delete it.
Bug: 538068
Change-Id: I96df8e91abfee78c91cf26c2466718e9145a69db
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
In Git protocol v2, UploadPack and ReceivePack have the same
capabilities and can process any protocol v2 request. For example, a
client can sent a "fetch" command to the "/git-receive-pack" endpoint.
This makes it difficult for existing hook interfaces. For example,
PreUploadHook takes UploadPack, but a "fetch" command may be received by
ReceivePack.
To resolve this skew, this change introduce a different hook interface
for the protocol v2. The hook takes a request that is independent to the
handlers (UploadPack, ReceivePack). Also this makes it clear what
parameters the hook is counting on, instead of keep track of the hook
using getters from UploadPack / ReceivePack.
Bug: 534847
Change-Id: I71f3266584483db1e2b2edfc1a72d0bdf1bb6041
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
When fetching with protocol v2, git expects the shallow-info section to
appear before wanted-refs if both appear in the response. Teach
UploadPack to do this.
Change-Id: Ie26a91edcce5d27a1d727d7fba5c30e1144e118b
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
ResolveMerger.checkout() and cleanUp() check out files directly and
must honor CR/LF settings and also smudge filters.
Deprecate the 3-argument version of DirCacheCheckout.checkoutEntry().
It isn't used anymore anywhere in JGit (nor in EGit).
Bug: 537410
Change-Id: I062b35401c8bd5bc99deb2f68f91089a0643504c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
UploadPack already allows the client to send wanted OIDs as "want"
lines. Extend UploadPack to also allow the client to send wanted ref
names as "want-ref" lines when the fetch is done using protocol v2.
The corresponding Git commit is 516e2b76bd ("upload-pack: implement
ref-in-want", 2018-06-28).
To support a two-stage rollout, two configuration variables are
provided: uploadpack.allowrefinwant (default "false") allows clients to
specify "want-ref" in their requests, and uploadpack.advertiserefinwant
(default "true") makes UploadPack advertise this capability. If
uploadpack.allowrefinwant is true but uploadpack.advertiserefinwant is
false, UploadPack will not advertise that it supports "want-ref", but it
will support it.
Change-Id: I3c24077949640d453af90d81a7f48ce4b8ac9833
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Two submodules at the same path on different branches need not represent
the same repository, and two submodules at different paths can represent
the same one.
The C Git implementation uses the submodule name to internally manage
the submodule repositories under .git/modules. When a submodule
represents different repositories in different branches, it makes a
conflict inside .git/modules.
The current RepoCommand implementation uses submodule paths as the
submodule names. When the manifest file mounts different repositories to
the same path in different branches, this makes a situation described
above. To solve this issue, we can use the project name instead of
the path as the submodule name.
On the other hand, since repo v1.12.8~3^2 (repo: Support multiple
branches for the same project., 2013-10-11), a manifest file can mount
the same project to different paths. If we naively use the project
name as the submodule name, it makes a conflict in .git/modules, too.
This patch uses the project name as the submodule name basically, but
when the same project is mounted to different paths, it uses the project
name and path as the submodule name.
Change-Id: I09dc7d62ba59016fe28852d3139a56ef7ef49b8f
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Reported-by: JP Sugarbroad <jpsugar@google.com>
* stable-5.0:
Prepare 4.7.3-SNAPSHOT builds
JGit v4.7.2.201807261330-r
Delete all loose refs empty directories
Use java.nio to delete path to get detailed errors
GC: Remove empty references folders
Do not ignore path deletion errors
Change-Id: I9717444c42ea89195dfcde8bb10121b9bb178e87
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.11:
Prepare 4.7.3-SNAPSHOT builds
JGit v4.7.2.201807261330-r
Delete all loose refs empty directories
Use java.nio to delete path to get detailed errors
GC: Remove empty references folders
Do not ignore path deletion errors
Change-Id: I780d4a1624fbb97a2acdf5321b9c3244b0626444
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.10:
Prepare 4.7.3-SNAPSHOT builds
JGit v4.7.2.201807261330-r
Delete all loose refs empty directories
Use java.nio to delete path to get detailed errors
GC: Remove empty references folders
Do not ignore path deletion errors
Change-Id: I2b44d862869d4453c57db668fc7c925da591f671
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.9:
Prepare 4.7.3-SNAPSHOT builds
JGit v4.7.2.201807261330-r
Delete all loose refs empty directories
Use java.nio to delete path to get detailed errors
GC: Remove empty references folders
Do not ignore path deletion errors
Change-Id: Ie7029bc91621af32e7bfd2e0d76a424b991b1995
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.8:
Prepare 4.7.3-SNAPSHOT builds
JGit v4.7.2.201807261330-r
Delete all loose refs empty directories
Use java.nio to delete path to get detailed errors
GC: Remove empty references folders
Do not ignore path deletion errors
Change-Id: I6ab2b951dd94a9fc1c4f5283847a3e2ec37d0895
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.7:
Prepare 4.7.3-SNAPSHOT builds
JGit v4.7.2.201807261330-r
Delete all loose refs empty directories
Use java.nio to delete path to get detailed errors
GC: Remove empty references folders
Do not ignore path deletion errors
Change-Id: Iadc8275fbaa3d6f7d08a96ab66d49f392f6aab78
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Remove completely the empty directories under refs/<namespace>
including the first level partition of the changes, when they are
completely empty.
Bug: 536777
Change-Id: I88304d34cc42435919c2d1480258684d993dfdca
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When processing a fetch using protocol v2, UploadPack#fetchV2 sends an
extraneous flush pkt when also sending a packfile (#sendPack sending its
own flush pkt). Update that method to only send the flush pkt if the
packfile is not being sent.
Change-Id: I7117a264bccd2d7f3a048645fcb8425a9d78d526
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
In a0c9016abd ("upload-pack: send refs' objects despite "filter"",
2018-07-09), Git updated the "filter" option in the fetch-pack
upload-pack protocol to not filter objects explicitly specified in
"want" lines, even if they match the criterion of the filter. Update
JGit to match that behavior.
Change-Id: Ia4d74326edb89e61062e397e05483298c50f9232
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Don't try to delete folders if the merger chooses THEIRS, but all of
BASE, OURS, and THEIRS contain the folder.
Add a test for rebase with auto-stash and subdirectories that
verifies this case. The needless directory deletion and reporting
such directories in getModifiedFiles() was the root cause of bug
536880.
Note even with this fix, bug 536880 will not be fixed in all cases
yet. There may still be cases where the set of modified files ends
up containing directories. This will be dealt with in EGit where
this set is used. (See https://git.eclipse.org/r/#/c/126242/ .)
Bug: 536880
Change-Id: I62b4571a1c1d4415934a6cb4270e0c8036deb2e9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
RacyGitTests depend on filesystem timer resolution. We wait for a file
system timer tick, remember that time as t1, modify a file and assume
that this file has a lastmodified of t1.
If this assumption is not fulfilled then ignore the test result.
Bug: 526111
Change-Id: Ia38b7d2f99171ef54b8f9fe5be343cf9fcfd3971
Currently SubmoduleAddCommand always uses the path as submodule name.
This patch lets the caller specify a submodule name.
SubmoduleUpdateCommand still does not make use of the submodule name
(see bug 535027) but Git does. To avoid triggering CVE-2018-11235,
do some validation on the name to avoid '..' path components.
[jn: fleshed out commit message, mostly to work around flaky CI]
Change-Id: I6879c043c6d7973556e2080387f23c246e3d76a5
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Make the method names more consistent and their semantics simpler:
hasRef and seekRef to look up a single exact reference by name and
hasRefsByPrefix and seekRefsByPrefix to look up multiple references by
name prefix.
In particular, splitting hasRef into two separate methods for its
different uses makes DfsReftableDatabase.isNameConflicting easier to
follow.
[jn: fleshed out commit message]
Change-Id: I71106068ff3ec4f7e14dd9eb6ee6b5fab8d14d0b
Signed-off-by: Minh Thai <mthai@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Reftable implementation of RefDatabase.getRefsByPrefix() should be
more performant, as references are filtered directly by prefix;
instead of fetching the whole subtree then filter by prefix.
Change-Id: If4f5f8c08285ea1eaec9efb83c3d864cea7a1321
Signed-off-by: Minh Thai <mthai@google.com>
After packaging references, the folders containing these references are
not deleted. In a busy repository, this causes operations to slow down
as traversing the references tree becomes longer.
Delete empty reference folders after the loose references have been
packed.
To avoid deleting a folder that was just created by another concurrent
operation, only delete folders that were not modified in the last 30
seconds.
Signed-off-by: Hector Oswaldo Caballero <hector.caballero@ericsson.com>
Change-Id: Ie79447d6121271cf5e25171be377ea396c7028e0
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>