Commit body contains the message that is not needed for reachability checks, and
takes up memory unnecessarily.
Change-Id: I0c7f6da249bf9c4fda9dc9e62e809322c68effce
Signed-off-by: Minh Thai <mthai@google.com>
This can help track down poor long tail performance that isn't accounted
for in the readIdxMicros or readBlockMicros metrics.
Change-Id: I701b9cfcc124f4ddb860d1766a11ea3557e604ce
Signed-off-by: Terry Parker <tparker@google.com>
* stable-4.11:
Fix error log message in ObjectDirectory.handlePackError()
Properly format pack checksums in PackFile.idx()
Cancel gc if thread was interrupted
PackFile: report correct message for checksum mismatch
ObjectDirectory: Clean up logging
Bazel: Stop using native.git_repository
ObjectDirectory: extra logging on packfile exceptions
Change-Id: If75b149e693005dd3fe06b523e6e6784bedf44c1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.10:
Fix error log message in ObjectDirectory.handlePackError()
Properly format pack checksums in PackFile.idx()
Cancel gc if thread was interrupted
PackFile: report correct message for checksum mismatch
ObjectDirectory: Clean up logging
Bazel: Stop using native.git_repository
ObjectDirectory: extra logging on packfile exceptions
Change-Id: I9052e318b5d920770f7c7121d36e3c58df9d5f5a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.9:
Fix error log message in ObjectDirectory.handlePackError()
Properly format pack checksums in PackFile.idx()
Cancel gc if thread was interrupted
PackFile: report correct message for checksum mismatch
ObjectDirectory: Clean up logging
Bazel: Stop using native.git_repository
ObjectDirectory: extra logging on packfile exceptions
Change-Id: I0847251eb010616a705e0b91df4bdebc225fa95d
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When the packfile checksum does not match the expected one
report the correct checksum error instead of reporting that
the number of objects is incorrect.
Change-Id: I040f36dacc4152ae05453e7acbf8dfccceb46e0d
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit 436c99ce59)
Externalize the message and log the pack file with absolute path.
Change-Id: I019052dfae8fd96ab67da08b3287d699287004cb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
(cherry picked from commit 9665d86ba1)
Display extra logging, including the exception with the associated
stacktrace, whenever a packFile can't be read and thus removed
from the packlist.
Change-Id: I97a4e31dc427bfcc0baae438dcbe2dcd4704b824
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
(cherry picked from commit 962babc4b2)
* stable-5.2:
Fix error log message in ObjectDirectory.handlePackError()
Properly format pack checksums in PackFile.idx()
Cancel gc if thread was interrupted
PackFile: report correct message for checksum mismatch
ObjectDirectory: Clean up logging
Bazel: Stop using native.git_repository
Change-Id: Ib972641105cef8089791fc65389c4f43e218620a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-5.1:
Fix error log message in ObjectDirectory.handlePackError()
Properly format pack checksums in PackFile.idx()
Cancel gc if thread was interrupted
PackFile: report correct message for checksum mismatch
ObjectDirectory: Clean up logging
Bazel: Stop using native.git_repository
Change-Id: I42b72a3bba3b4c9389d91a1a35a8004836567e7c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When the packfile checksum does not match the expected one
report the correct checksum error instead of reporting that
the number of objects is incorrect.
Change-Id: I040f36dacc4152ae05453e7acbf8dfccceb46e0d
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Externalize the message and log the pack file with absolute path.
Change-Id: I019052dfae8fd96ab67da08b3287d699287004cb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Previously, we called destroy() to delete the temp file on failure only
when catching an IOException, not a RuntimeException. Use a slightly
different construction with a finally block to ensure it's always
deleted on error (assuming the JVM is still healthy enough).
Change-Id: Ie201f3cfc81099ee1cafed066632da76223cef1f
There are valid cases where a hook, invoked by ProtocolV2Hook
and probably implemented in a different package, is interested
in knowing the wanted refs in the request.
Increase visibility to public in the wanted-ref method.
Change-Id: I5da085ac7af4c396c1cb85e630f40a57fc70b33e
Signed-off-by: Ivan Frade <ifrade@google.com>
Similar to UploadPack.getDepth() to know the shallow clone depth, expose
the user-specified filter blob limit for partial clones.
Change-Id: I04bde06862a1cf8a9862d950c15023c49d16a2a6
Signed-off-by: Terry Parker <tparker@google.com>
* changes:
RebaseCommand: tighten check for --preserve-merges on --continue
RebaseCommand: use orig-head to abort
RebaseCommand: use orig-head in addition to head
Hard-coding ~/.gnupg for the GPG directory doesn't work on Windows,
where GnuPG uses %APPDATA%\gnupg by default. Make the determination
of the directory platform-dependent.
Bug: 544797
Change-Id: Id4bfd39a981ef7c5b39fbde46fce9a7524418709
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Instead of a new "unexpectedNlinkValue" message use the already
existing "failedAtomicFileCreation". Remove a stray double quote
from the latter.
Change-Id: I1ba5e9ea48d3f7615354b2ace2575883070b3206
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
With native git, .git/rebase-merge/rewritten exists actually in two
different cases:
* as a file in git rebase --merge recording OIDs for copying notes
* as a directory in git rebase --preserve-merges
Add a comment, and check for isDirectory() instead of exists().
Bug: 511487
Change-Id: I6a3317b4234d4f41c41b3004cdc7ea0abf2c6223
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
ONTO_NAME must be "onto_name", not "onto-name".
For native git, --preserve-merges is an interactive mode. Create the
INTERACTIVE marker file, otherwise a native git rebase --continue
will fall back into rebase --merge mode before git 2.19.0 since it
started looking for the REWRITTEN directory to make the distinction
only then.[1]
This allows a JGit interactive rebase to be continued via native git
rebase --continue.
[1] https://github.com/git/git/commit/6d98d0c0
Bug: 511487
Change-Id: I13850e0fd96ac77d03fbb581c8790d76648dbbc6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Aborting a rebase used ORIG_HEAD to reset. Strictly speaking this is
not correct, since other commands run during the rebase (for instance,
when the rebase stopped on a conflict) might have changed ORIG_HEAD.
Prefer the OID recorded in the orig-head file, falling back to the
older "head" file if "orig-head" doesn't exist, and use ORIG_HEAD only
if neither exists.
Bug: 511487
Change-Id: Ifa99221bb33e4e4754377f9b8f46e76c8936e072
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
With text=auto or core.autocrlf=true, git does not normalize upon
check-in if the file in the index contains already CR/LFs. The
documentation says: "When text is set to "auto", the path is
marked for automatic end-of-line conversion. If Git decides that
the content is text, its line endings are converted to LF on
checkin. When the file has been committed with CRLF, no conversion
is done."[1]
Implement the last bit as in canonical git: check the blob in the
index for CR/LFs. For very large files, we check only the first 8000
bytes, like RawText.isBinary() and AutoLFInputStream do.
In Auto(CR)LFInputStream, ensure that the buffer is filled as much as
possible for the isBinary() check.
Regarding these content checks, there are a number of inconsistencies:
* Canonical git considers files containing lone CRs as binary.
* RawText checks the first 8000 bytes.
* Auto(CR)LFInputStream checks the first 8096 (not 8192!) bytes.
None of these are changed with this commit. It appears that canonical
git will check the whole blob, not just the first 8k bytes. Also
note: the check for CR/LF text won't work with LFS (neither in JGit
nor in git) since the blob data is not run through the smudge filter.
C.f. [2].
Two tests in AddCommandTest actually tested that normalization was
done even if the file was already committed with CR/LF.These tests
had to be adapted. I find the git documentation unclear about the
case where core.autocrlf=input, but from [3] it looks as if this
non-normalization also applies in this case.
Add new tests in CommitCommandTest testing this for the case where
the index entry is for a merge conflict. In this case, canonical git
uses the "ours" version.[4] Do the same.
[1] https://git-scm.com/docs/gitattributes
[2] https://github.com/git/git/blob/3434569fc/convert.c#L225
[3] https://github.com/git/git/blob/3434569fc/convert.c#L529
[4] https://github.com/git/git/blob/f2b6aa98b/read-cache.c#L3281
Bug: 470643
Change-Id: Ie7310539fbe6c737d78b1dcc29e34735d4616b88
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Since 2011-02-10 (i.e., git 1.7.6)[1] native git uses "orig-head" for
REBASE_HEAD. JGit was still using "head". Currently native git has a
legacy fall-back for reading this, but for how long? Let's write to
both. Note that JGit never reads this file.
[1] https://github.com/git/git/commit/84df4560
Bug: 511487
Change-Id: Id3742bf9bbc0001d850e801b26cc8880e646abfc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The non-externalized warning message says there is a "possible SHA-1
collision" but then the Sha1CollisionException is always thrown.
Replace the message with the existing externalised string that does
not say "possible".
Change-Id: I9773ec76b416c356e234a658fb119f98d33eac83
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
DfsBlockCache.Ref might get cleared out if the JVM is running out of
memory. As a result, the index is not persisted for the request and
will be reloaded unnecessarily.
Change-Id: I3b57ad5e6673f77f2dc66177a649ac412a97fe20
Signed-off-by: Minh Thai <mthai@google.com>
Deprecate the method in favor of setEncoding(Charset).
Update the only caller in the code base that was still using
the deprecated variant.
Change-Id: I6357f2d0c727007013c72e9d5b7c72a3f5f3f2b1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Display extra logging, including the exception with the associated
stacktrace, whenever a packFile can't be read and thus removed
from the packlist.
Change-Id: I97a4e31dc427bfcc0baae438dcbe2dcd4704b824
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Bug caused the pack to be 12 bytes short when cold cache. Also added
test for copyPackAsIs method.
Change-Id: Idf8fb0e50d1215245d4b032e2e00df4b218c115f
Signed-off-by: Minh Thai <mthai@google.com>
Android for instance forbids hard linking via a SELinux
policy. If we can't hard link, the NFS work-around for
atomic file creation cannot work at all. In this case,
fall back to not using the hard-linking mechanism.
Android throws an AccessDeniedException, so we catch that.
The javadoc on Files.createLink() indicates that another
possibility might be a SecurityException, so catch that,
too.
Bug: 543956
Change-Id: I551b7a45f7b2fbbd8cf94f0b7233dbd8a200520e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This method tried to iterate spurious files which may exist in the
.git/refs folder, e.g. on Mac a .DS_Store may have been created there by
inspecting the folder using the finder application. This led to a
NotDirectoryException when deleteEmptyRefsFolders tried to create an
iterator for such a file entry. Skip files contained in the refs folder
to ensure the method only tries to iterate contained folders but not
files.
Change-Id: I5f31e733072a35db1e93908a9c69a8891ae5c206
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Single-branch-clone should be able to clone a single tag. Enhance
CloneCommand to accept also full refs of tags in setBranchesToClone().
Make sure we also include fetch ref specs for the fetch command for
tags. This mimics the behavior of native git's single-branch clone:
git clone --branch <tag> --single-branch <URI>
Bug: 542611
Change-Id: I285cf043751d9b0ba71258ee8214c0e5d1191428
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Several problems:
* The command didn't specify whether it expected short or full names.
* For the new name, it expected a short name, but then got confused
if tags or both local and remote branches with the same name existed.
* For the old name, it accepted either a short or a full name, but
again got confused if a short name was given and a tag with the
same name existed.
With such an interface, one cannot use Repository.findRef() to
reliably find the branch to rename. Use exactRef() for the new
name as by the time the Ref is needed its full name is known.
For determining the old Ref from the name, do the resolution
explicitly: first try exactRef (assuming the old name is a full
name); if that doesn't find anything, try "refs/heads/<old>" and
"refs/remotes/<old>" explicitly. Throw an exception if the name
is ambiguous, or if exactRef returned something that is not a
branch (refs/tags/... or also refs/notes/...).
Document in the javadoc what kind of names are valid, and add tests.
A user can still shoot himself in the foot if he chooses exceptionally
stupid branch names. For instance, it is still possible to rename a
branch to "refs/heads/foo" (full name "refs/heads/refs/heads/foo"),
but it cannot be renamed further using the new short name if a branch
with the full name "refs/heads/foo" exists. Similar edge cases exist
for other dumb branch names, like a branch with the short name
"refs/tags/foo". Renaming using the full name is always possible.
Bug: 542446
Change-Id: I34ac91c80c0a00c79a384d16ce1e727c550d54e9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The new API is intended for UIs to check if signing will be possible or
would fail
Bug: 543579
Change-Id: I6ce1fd4210e46d49dcdf420c99d08c93e022136c
Signed-off-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
BundleFetchConnection.readLine() must abort on EOF, otherwise
it gets stuck in an endless loop.
Bug: 543390
Change-Id: I4cb3428560277888af114b928950d620bb6564f9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The import is only needed because of a reference to it in the Javadoc,
and can be avoided by explicitly specifying the package instead, which
is how it's referenced in other cases (Constants, FileHeader).
Change-Id: I0c6254a9adf1f52fb8f2c04a858b11696ad264f5
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This also includes a change to generating the jgit CLI jar. Shading is
no longer possible because it breaks the signature of BouncyCastle.
Instead, the Spring Boot Loader Maven plug-in is now used to generate an
executable jar.
Bug: 382212
Change-Id: I35ee3d4b06d9d479475ab2e51b29bed49661bbdc
Also-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
Signed-off-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
Signed-off-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This change introduces the concept of a GpgSigner which will sign
commits. The GpgSigner will be of a specific implementation (eg.,
Bouncycastle or OpenPgP executable). The actual implementation is not
part of this change.
Bug: 382212
Change-Id: Iea5da1e885c039e06bc8d679d46b124cbe504c8e
Also-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
As explained in 'The "Double-Checked Locking is Broken"
Declaration'[*], Java's memory model does not support double-checked
locking:
class LazyReadableChannel {
private ReachableChannel rc = null;
public ReadableChannel get() {
if (rc == null) {
synchronized (this) {
if (rc == null) {
rc = new ReadableChannel();
}
}
}
return rc;
}
}
With JDK 5 and newer, there is a formal memory model that ensures this
works if "rc" is volatile, but it is still not thread-safe without
that.
Fortunately, this ReadableChannelSupplier is never passed between
threads, so it does not need to be thread-safe. Simplify by removing
the synchronization.
[*] https://www.cs.umd.edu/~pugh/java/memoryModel/DoubleCheckedLocking.html
Change-Id: I0698ee6618d734fc129dd4f63fc047c1c17c94a9
Signed-off-by: Jonathan Nieder <jrn@google.com>
This allows scanning through refs once instead of once per ref, which
should make the lookup less expensive for some RefDatabase
implementations.
Change-Id: I1434f834186cc9a6b4e52659e692b1000c926995
Signed-off-by: Jonathan Nieder <jrn@google.com>
To avoid opening the readable channel in case of DfsBlockCache
hits. Also cleaning up typos around DfsBlockCache.
Change-Id: I615e349cb4838387c1e6743cdc384d1b81b54369
Signed-off-by: Minh Thai <mthai@google.com>
Opening a readable channel can be expensive and the number of channels
can be limited in DFS. Ensure that caller of
BlockBasedFile.readOneBlock() is responsible for opening and closing
the file, and that the ReadableChannel is reused in the request. As a side
effect, this makes the code easier to read, with better use of
try-with-resources.
The downside is that this means a readable channel is always opened, even
when the entire pack is already available for copying from cache. This
should be an acceptable cost: it's rare enough not to overload the server
and from a client latency perspective, the latency cost is in the noise
relative to the data transfer cost involved in a clone. If this turns out
to be a problem in practice, we can reintroduce that optimization in a
followup change.
Change-Id: I340428ee4bacd2dce019d5616ef12339a0c85f0b
Signed-off-by: Minh Thai <mthai@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
We see the same index being loaded by multiple threads. Each is
hundreds of MB and takes several seconds to load, causing server to
run out of memory. This change introduces a lock to avoid these
duplicate works. It uses a new set of locks similar in implementation
to the loadLocks for getOrLoad of blocks. The locks are kept separate
to prevent long-running index loading from blocking out fast block
loading. The cache instance can be configured with a consumer to
monitor the wait time of the new locks.
Change-Id: I44962fe84093456962d5981545e3f7851ecb6e43
Signed-off-by: Minh Thai <mthai@google.com>
CheckoutCommand had a setForce() method. But this didn't correspond
to native git's 'git checkout -f' option. Deprecate the old setForce()
method and move its implementation to a new method setForceRefUpdate()
and use it to implement the -B option in the CLI class Checkout.
Add a setForced() method and use it to fix the associated '-f' option of
the CLI Checkout class to behave like native git's 'git checkout -f'
which overwrites dirty worktree files during checkout.
This is still not fully matching native git's behavior: updating
additionally dirty index entries is not done yet.
Bug: 530771
Change-Id: I776b78eb623b6ea0aca42f681788f2e4b1667f15
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To avoid breaking ABI, take the opportunity to give these setters
(hopefully sometimes better) names and deprecate their old names.
Change-Id: Ib45011678c3d941f8ecc1a1e0fdf4c09cdc337e3
Signed-off-by: Mario Molina <mmolimar@gmail.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Swallowing intermittent errors and trying to recover from them
makes JGit's behavior hard to predict and difficult to debug.
Propagate the errors instead. This doesn't violate JGit's usual
backward compatibility promise for clients because in these
contexts an IOException indicates either repository corruption or
a true I/O error. Let's consider these cases one at a time.
In the case of repository corruption, falling back e.g. to an empty
set of refs or a missing ref will not serve a caller well. The
fallback does not indicate the nature of the corruption, so they are
not in a good place to recover from the error. This is analogous to
Git, which attempts to provide sufficient support to recover from
corruption (by ensuring commands like "git branch -D" cope with
corruption) but little else.
In the case of an I/O error, the best we can do is to propagate the
error so that the user sees a dialog and has an opportunity to try
again. As in the corruption case, the fallback behavior does not
provide enough information for a caller to rely on the current error
handling, and callers such as EGit already need to be able to handle
runtime exceptions.
To be conservative, keep the existing behavior for the deprecated
Repository#peel method. In this example, the fallback behavior is to
return an unpeeled ref, which is distinguishable from the ref not
existing and should thus at least be possible to debug.
Change-Id: I0eb58eb8c77519df7f50d21d1742016b978e67a3
Signed-off-by: Jonathan Nieder <jrn@google.com>
Its implementation contains
} catch (IOException e) {
// Legacy API, assume error means "no"
return false;
}
Better to use ObjectDatabase#has, which throws IOException to report
errors.
Change-Id: I7de02f7ceb8f57b2a8ebdb16d2aa4376775ff933
Signed-off-by: Jonathan Nieder <jrn@google.com>
That constant is just a redirection to a java standard constant
meanwhile. It is not referenced anymore in jgit code (and egit is just
removing it). Clients can use the redirection target directly.
Change-Id: I058d013f61da8d7b771c499d8743aafb8faa5ea8
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A checkout done directly after cloning (the "initial
checkout") has a different semantic as a default
checkout. That is defined in the documentation of
"git read-tree" [1]. JGit was detecting that it is
doing an initial checkout differently from native
git: jgit used to check that the index is empty
but native git required that the index file does
not exist [2]. Teach JGit to behave like native
git.
[1] https://github.com/git/git/blob/master/Documentation/git-read-tree.txt#L187
[2] https://marc.info/?t=154150811200001&r=1&w=2
Change-Id: I1dd0f1ede7cd7ea60d28607916d0165269a9f628
and allow package org.eclipse.jgit.http.server to use package
org.eclipse.jgit.internal.transport.parser.
Change-Id: Ief330c3e75a735853d0a5a265a9ff56fb5128b99
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Another step toward merging BaseReceivePack into ReceivePack.
Change-Id: If861e28ce512f556e574352fa7d4a0df0984693f
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Another step toward merging BaseReceivePack into ReceivePack.
Change-Id: I43cf2e36e2d5b0cd85bf23c81469909c14757b63
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Another step toward eliminating BaseReceivePack as a separate API.
Change-Id: If7b7d5c65a043607a2424211adb479fa33a9077b
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This is a first step toward eliminating the BaseReceivePack API.
Inspired by a larger change by Dan Wang <dwwang@google.com>.
Change-Id: I5c876a67d8db24bf808823d9ea44d991b1ce5277
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
RefDatabase.getRef was declared final in
c1954f6c36
which only affects implementers.
Change-Id: I4c14232a119670d263d88db2b8d725dcdd36ab2a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This simplifies the BaseReceivePack class and decreases its API
surface, which should make merging with ReceivePack easier.
Inspired by 6aca8899a5 (Move first line
parsing for v0/v1 pack negotiation out of UploadPack, 2018-09-17).
Change-Id: I1fc175d15aa7cb5968c26fc83a95480403af617c
Using findRef instead of getRef makes it clearer that the caller wants
to search for the ref in the search path, instead of looking for a ref
that exactly matches the input.
This change introduces the new findRef method and deprecates getRef.
It updates Repository#findRef to use the new method, ensuring some
test coverage. Other callers will be updated in followup changes.
A nice side effect of introducing the new findRef method is that it is
final and based on firstExactRef, so implementers can focus on
implementing the latter efficiently and do not have to carefully write
custom path search code respecting SEARCH_PATH.
Change-Id: Id3bb944344a9743705fd1f20193ab679298fa51c
Signed-off-by: Jonathan Nieder <jrn@google.com>
Override exactRef(String...) and firstExactRef(String...) with
implementations specific to FileRepository.
The specialized implementations are similar to the generic ones from
RefDatabase, but because these use readRef directly instead of
exactRef, they only need to call fireRefsChanged once.
This will allow replacing RefDirectory#getRef with a generic
implementation that uses firstExactRef without hurting performance.
Change-Id: I1be1948bd6121c1a1e8152e201aab97e7fb308bb
Signed-off-by: Jonathan Nieder <jrn@google.com>
Psuedorefs like FETCH_HEAD and MERGE_HEAD are supposed to be directly
under the .git directory, not in other locations in the SEARCH_PATH
like refs/ and refs/heads/. Use exactRef to access them.
Change-Id: Iab8ac47008822fa78fc0691e239e518c34d7a98e
Signed-off-by: Jonathan Nieder <jrn@google.com>
This is simpler to implement than getRef. Make it abstract so
implementers remember to override it.
Change-Id: I5f319be1fb1206d7a0142ea939dc4e1039f850ab
Signed-off-by: Jonathan Nieder <jrn@google.com>
getRef and exactRef can produce recoverable exceptions --- for
example, a corrupt loose ref that cannot be parsed. If readRef was
called and updated looseRefs in the process, RefsChangedEvent should
still be fired.
Noticed while improving the implementation of getRef. This commit
only affects exactRef and getRef. Other methods might be similarly
skipping firing RefsChangedEvent in their error handling code, and
this change does not fix them.
Change-Id: I0f460f6c8d9a585ad8453a4a47c1c77e24a1fb83
Signed-off-by: Jonathan Nieder <jrn@google.com>
Both getRef and exactRef look for a ref or pseudoref in the $GIT_DIR
directory, with careful error handling to handle non-refs like
.git/config.
Avoid the duplication by factoring out a helper that takes care of
this. This should make the code easier to understand and manipulate.
Change-Id: I2ea67816d2385e84e2d3394b897e23df5826ba50
Signed-off-by: Jonathan Nieder <jrn@google.com>
Clients can use --shallow-exclude to obtain information about what
commits are reachable from refs they are not supposed to be able to
see. Plug the hole by allowing the AdvertiseRefsHook and RefFilter to
take effect here, too.
Change-Id: If2b8e95344fa49e10a6a202144318b60d002490e
Signed-off-by: Jonathan Nieder <jrn@google.com>
The AdvertiseRefsHook can be called twice if the following conditions
hold:
1. This AdvertiseRefsHook doesn't set this.refs.
2. getAdvertisedOrDefaultRefs is called after getFilteredRefs.
For example, this can happen when fetchV2 is called after lsRefsV2
when using a stateful bidirectional transport.
The second call does not accomplish anything useful. Guard it with
'if (!advertiseRefsHookCalled)' to avoid wasted work.
Reported-by: Jonathan Tan <jonathantanmy@google.com>
Change-Id: Ib746582e4ef645b767a5b3fb969596df99ac2ab5
Signed-off-by: Jonathan Nieder <jrn@google.com>
Now the reference carries its updateIndex, so the cursor doesn't need
to expose it.
Change-Id: Icbfca46f92a13f3d8215ad10b2a166a6f40b0b0f
Signed-off-by: Ivan Frade <ifrade@google.com>
In DFS implementations the reference table can fall out of sync, but
it is not possible to check this situation in the current API.
Add a property to the Refs indicating the order of its updates. This
version is set only by RefDatabase implementations that support
versioning (e.g reftable based).
Caller is responsible to check if the reference db creates versioned
refs before accessing getUpdateIndex(). E.g:
Ref ref = refdb.exactRef(...);
if (refdb.hasVersioning()) {
ref.getUpdateIndex();
}
Change-Id: I0d5ec8e8df47c730301b2e12851a6bf3dac9d120
Signed-off-by: Ivan Frade <ifrade@google.com>
In the longer term, we can add support for this to the
RequestValidator interface. In the short term, this is a minimal
band-aid to ensure any refs the client requests are visible to the
client.
Change-Id: I0683c7a00e707cf97eef6c6bb782671d0a550ffe
Reported-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
ProtocolV2Parser explains:
// TODO(ifrade): This validation should be done after the
// protocol parsing. It is not a protocol problem asking for an
// unexisting ref and we wouldn't need the ref database here.
Do so. This way all ref database accesses are in one place, in the
UploadPack class.
No user-visible change intended --- this is just to make the code
easier to manipulate.
Change-Id: I68e87dff7b9a63ccc169bd0836e8e8baaf5d1048
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
AdvertiseRefsHook is used to limit the visibility of the refs in Gerrit.
If this hook is not called, then all refs are treated as visible.
In protocol v2, the hook is not called, causing the server to advertise
all refs. This bug was introduced in v5.0.0.201805221745-rc1~1^2~9
(Execute AdvertiseRefsHook only for protocol v0 and v1, 2018-05-14).
Even before then, the hook was not called in requests after the
capability advertisement, so in transports like HTTP that do not retain
state between round-trips, the server would advertise all refs in
response to an ls-refs (ls-remote) request.
Fix both cases by using getAdvertisedOrDefaultRefs to retrieve the
advertised refs in lsRefs, ensuring the hook is called in all cases that
use its result.
[jn: backported to stable-5.0; split out from a larger patch that also
fixes protocol v0; avoided filtering this.refs by ref prefix]
Change-Id: I64bce0e72d15b90baccc235c067e57b6af21b55f
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
AdvertiseRefsHook is used to limit the visibility of the refs in Gerrit.
If this hook is not called, then all refs are treated as visible,
causing the server to serve commits reachable from branches the client
should not be able to access, if asked to via a request naming a guessed
object id.
This bug was introduced in v2.0.0.201206130900-r~123 (Modify refs in
UploadPack/ReceivePack using a hook interface, 2012-02-08). Stateful
bidirectional transports are not affected.
Fix it by moving the AdvertiseRefsHook call to
getAdvertisedOrDefaultRefs, ensuring the hook is called in all cases.
[jn: backported to stable-4.5 by splitting out tests and the protocol v2
specific parts]
Change-Id: I159f396216354f2eda3968d17802e166d8c8ec2d
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.2:
BasePackConnection: Check for expected length of ref advertisement
TransferConfig: Make constructors public
Update last JGit version
Change-Id: I4406d4f68136a2ce363701324b9a842ad468bc59
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-5.1:
BasePackConnection: Check for expected length of ref advertisement
TransferConfig: Make constructors public
Change-Id: I2480a0455250ee381fae93cac2db30f8305fa6aa
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When a server sends a ref advertisement using protocol v2 it contains
lines other than ref names and sha1s. Attempting to get the sha1 out
of such a line using the substring method can result in a SIOOB error
when it doesn't actually contain the sha1 and ref name.
Add a check that the line is of the expected length, and subsequently
that the extracted object id is valid, and if not throw an exception.
Change-Id: Id92fe66ff8b6deb2cf987d81929f8d0602c399f4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
UploadPack has a setTransferConfig method which allows to set the
transfer config, however since the constructors of TransferConfig
have the default package visibility it is not possible for any
application using UploadPack, for example Gerrit, to actually set
a transfer config.
Make the constructors public. This is consistent with the public
constructors for example on PackConfig.
Change-Id: I07080255838421871403b2b2bcc294aa8f621c57
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This makes the implementation consistent with the other similar
methods in this class.
Change-Id: I007876aad883615d696c8eabc886818ae00b10ee
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The setProtocolV2Hook sets the protocolV2Hook to whatever value is
passed, which could be null, but the invocations of protocolV2Hook's
methods are not guarded by null-checks.
Annotate the parameter as @Nullable and set ProtocolV2Hook.DEFAULT
when null is passed. This makes the implementation consistent with
other similar methods that set a hook or filter with possible null
value.
Change-Id: I70919a3248d4c2658783941a37c47e437cff0baa
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The class has several methods where passing a null parameter is
valid. Annotate those parameters as @Nullable.
Change-Id: Ie08893ee3ab34c1ffb2db875b4ab049ad065c697
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Set GIT_DIR and GIT_WORK_TREE when calling hooks.
Bug: 541622
Change-Id: I6153d8a6a934ec37a3a5e7319c2d0e516f539ab7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
After cloning a repo with a submodule, non-recursively, JGit would
encounter in its TreeWalk in IndexDiff:
* first, a missing gitlink (in index & HEAD, not in working tree)
* second, the untracked folder (not in index and head, in working tree)
As a result, it would report the submodule as missing. Canonical git
reports a clean workspace.
The root cause of this is that the path of a gitlink "x" did
not compare equal to the path of a tree "x" in JGit.
Correct Paths.compare() to account for that. If two paths are otherwise
equal, then let gitlinks match both trees and files. Matching trees
solves the bug. Matching files is necessary to handle the case where
the gitlink directory was replaced by a file; see the new test case
IndexDiffSubmoduleTest.testSubmoduleReplacedByFile(). Comparisons of
unequal paths are left untouched, so the sort order is unchanged.
After the fix, another bug(?) in WorkingTreeIterator became apparent:
with core.dirNoGitLinks = true, it was no longer possible to overwrite
a gitlink in the index. This is now fixed in WorkingTreeIterator.
Add new test cases for the bug itself and for some related cases
(submodule directory deleted or replaced by a file) in
IndexDiffSubmoduleTest. Add a test for missing files in IndexDiffTest,
and adapt the PathsTest to test matching gitlinks.
Bug: 467631
Change-Id: I0549d10d46b1858e5eec3cc15095aa9f1d5f5280
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
when multiple match options are given in git describe the result must
not depend on the order of the match options. JGit wrongly picked the
first match using the match options in the order they were defined. Fix
this by concatenating the streams of matching tags for all match options
and then choosing the first match on the concatenated stream sorted in
tie break order.
See https://git-scm.com/docs/git-describe#git-describe---matchltpatterngt
Change-Id: Id01433d35fa16fb4c30526605bee041ac1d954b2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
According to RFC 2616 [1] header field names are case insensitive.
Header fields defined as a comma separated list can have multiple header
fields with the same field name. Add a method to HttpConnection which
retrieves all values with a given header field name with the field name
compared case insensitive.
[1] https://tools.ietf.org/html/rfc2616#section-4.2"
Change-Id: I7f601b21cda99e84f43f866c7c7cb4cb0e3cf5c3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This partially reverts commit a551b646: revert the changes in
RawParseUtils.lineMap(). Forcing all blobs containing a NUL byte
as a single line causes blame to produce useless results as soon
as it hits any version containing a NUL byte.
Doing binary detection at this level also has the problem that the
user cannot control it. Not by setting the text attribute nor in any
other way.
This came up in bug 541036, where a Java source inadvertently
contained NUL bytes in strings. Even fixing this by using escapes
"\000" will not fix JGit's blame for this file because the past
versions will still contain the NUL byte.
Native git can blame that file from bug 541036 fine.
Added new tests verifying that blaming a text file containing a NUL
byte produces sensible results.
Bug: 541036
Change-Id: I8991bec88e9827cc096868c6026ea1890b6d0d32
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This continues what commit d9ac7ddf10
(Remove unnecessary modifiers from interfaces, 2018-11-15) started.
Change-Id: I89720985a5a986722a0dcb9b5e9bbc25996bd5b3
This reverts the workaround introduced by
1c6c73c5a9, which is a patch for dealing
with a buggy C Git client v1.7.5 in 2012. We'll stop supporting very old
C Git clients.
Change-Id: I94999a39101c96f210b5eca3c2f620c15eb1ac1b
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
From Oracle's "Defining an interface":
"All abstract, default, and static methods in an interface are
implicitly public, so you can omit the public modifier."
(Without any modifier, the interface methods are also abstract, so we
omit also the "abstract")
"In addition, an interface can contain constant declarations. All
constant values defined in an interface are implicitly public, static,
and final. Once again, you can omit these modifiers."
This makes the code more consistent. Now all interfaces under
org.eclipse.jgit follow the guidelines.
Change-Id: I4fe6deb111899ec1b4318ab5a6050f3851fa1fd3
Signed-off-by: Ivan Frade <ifrade@google.com>
Add a new ssh client implementation based on Apach MINA sshd 2.0.0.
This implementation uses JGit's own config file parser and host entry
resolver. Code inspection of the Apache MINA implementation revealed
a few bugs or idiosyncrasies that immediately would re-introduce bugs
already fixed in the past in JGit.
Apache MINA sshd is not without quirks either, and I had to configure
and override more than I had expected. But at least it was all doable
in clean ways.
Apache MINA boasts support for Bouncy Castle, so in theory this should
open the way to using more ssh key algorithms, such as ed25519.
The implementation is in a separate bundle and is still not used in
the core org.eclipse.jgit bundle. The tests re-use the ssh tests from
the core test bundle.
Bug: 520927
Change-Id: Ib35e73c35799140fe050d1ff4fb18d0d3596580e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add support for git-receive-pack to the ssh git server and add two
new tests for pushing.
This actually uncovered an undocumented requirement in TransportSftp:
the FTP rename operation assumes POSIX semantics, i.e., that the
target is removed. This works as written only for servers that
support and advertise the "posix-rename@openssh.com" FTP extension.
Our little Apache MINA server does not advertise this extension.
Fix the FtpChannel implementation for Jsch to handle this case in a
meaningful way so that it can pass the new "push over sftp" test.
Add more tests to test the behavior of server host key checking.
Also refactor the tests generally to separate better the test
framework from the actual tests.
Bug: 520927
Change-Id: Ia4bb85e17ddacde7b36ee8c2d5d454bbfa66dfc3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Introduce an FtpChannel abstraction, which can be obtained from a
RemoteSession. In JSchSession, wrap a JSch ChannelSftp as such an
FtpChannel. The JSch-specific SftpException is also mapped to a
generic FtpException. Rewrite TransportSftp to use only the new
abstraction layer.
This makes it possible to provide alternate ssh/sftp implementations.
Bug: 520927
Change-Id: I379026f7d4122f34931df909a28e73c02cd8a1da
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The lock is obtained in receivePackAndCheckConnectivity. It seems to me
the structure that requres the caller to unlock the lock is wrong, but
at least by calling in finally ensures it is called even if an exception
is thrown.
Change-Id: I123841b017baf5acffe0064d1004ef11a0a5e6c2
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Do not add an artificial line break to the message, since it may become
much wider due to the embedded exception messages anyway.
The layout shall be controlled by the egit supplied message dialog using
layout constraints.
Bug: 540537
Change-Id: I4257b52e5e59689dfcbab47bd7c075b3fd031837
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Correct behaviour as git 1.7.1.1 is to resolve tie-breakers to choose
the most recent tag.
https://github.com/git/git/blob/master/Documentation/RelNotes/1.7.1.1.txt:
* "git describe" did not tie-break tags that point at the same commit
correctly; newer ones are preferred by paying attention to the
tagger date now.
Bug: 538610
Change-Id: Ib0b2a301997bb7f75935baf7005473f4de952a64
Signed-off-by: Håvard Wall <haavardw@gmail.com>
Factor out a helper that calls next() and tunnels IOException in a
RuntimeException, similar to TunnelException.tunnel(RevWalk::next) in
Guava terms[1].
This should make the code a little more readable. No functional
change intended.
[1] https://github.com/google/guava/issues/2828#issuecomment-304187823
Change-Id: I97c062d03a17663d5c40895fd3d2c6a7306d4f39
Signed-off-by: Jonathan Nieder <jrn@google.com>
MissingObjectException and IncorrectObjectTypeException are subclasses
of IOException.
Change-Id: Ib4e1f37ce1b0b08e69ba3375bbdb6ee82ee4f036
Signed-off-by: Jonathan Nieder <jrn@google.com>
Suppose that a repository has the following commit graph:
B C
\ /
A
and it was cloned with --shallow-exclude=A. DepthGenerator does not mark
C as shallow, causing an invalid repository to be produced on the
client, because A is not sent. (A similar issue occurs when
--shallow-since is used to exclude A but neither B nor C.)
This happens whenever an excluded commit has more than one child that is
to be sent to the client. Fix DepthGenerator to handle this case
correctly.
While we're editing DepthWalk.Commit, fix the documentation of
DepthWalk.Commit#isBoundary.
Change-Id: I7068abf0fe0c864d1b0e56e1616dad1aa8719411
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Move the bulk of the basic parsing and host entry handling into a
new class OpenSshConfigFile that has no dependencies on any concrete
ssh implementation. Make the existing OpenSshConfig use the new
parser.
Introduce a new class SshConstants collecting all the various ssh-
related string literals. Also use TreeMaps with a case-insensitive
key comparator instead of converting keys to uppercase. Add a test
to verify that keys are matched case-insensitively.
Most of the parsing code was simply moved, except that the new
parser supports looking up entries given host name, port, and user
name, and can thus handle more %-substitutions correctly. This
feature is not yet used and cannot be used with JSch since JSch
only has a ConfigRepository.getConfig(String) interface.
The split is still worth the trouble as it opens the way to using
another ssh client altogether. Apache MINA sshd, for instance,
resolves host entries giving host name, port, and user name.
(Apache MINA has a built-in ssh config handling, but that has
problems, too: its pattern matching is case-insensitive, and its
merging of host entries if several match is not the same as in
OpenSsh. But with this refactoring, it will be possible to plug in
OpenSshConfigFile into an Apache MINA sshd client without dragging
along JSch.)
One test case that doesn't make sense anymore has been removed. It
tested that repeatedly querying for a host entry returned the same
object. That is no longer true since the caching has been moved to
a deeper level.
Bug: 520927
Change-Id: I6381d52b29099595e6eaf8b05c786aeeaefbf9cc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Do not export o.e.j.internal.transport.parser as public package;
restrict visibility to org.eclipse.jgit.test only.
Add two packages that were not listed at all (o.e.j.internal.revwalk
and o.e.j.internal.submodule) marked as x-internal:=true.
Change-Id: I9188356075515ad354b724102fbd6304b682de6a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The removed method and the new interface method only affect implementors
which is ok in a minor release following OSGi semantic versioning.
Change-Id: Ia5e55bd803965c7590c9278eecc6bdd36241383f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The copyfile entry in the manifest file copies the contents of the file
but doesn't keep the executable flag. This is inconsistent with repo
tool behaviour, plus is natural to expect that the copy of a executable
file is executable.
Transfer the executable bit when copying the file, aligning the
RepoCommand with repo tool and user expectations.
Change-Id: I01b24f482d5939e01d496f032388b3a5c02a912a
Signed-off-by: Ivan Frade <ifrade@google.com>
The RepoCommand.RemoteReader interface doesn't offer access to the mode
of a file. Caller can only default to mark the copied objects as regular
files, losing e.g. the executable bit (if set).
Add a new method readFileWithMode that returns the contents and mode of
the remote file. It supersedes the readFile method, that is marked as
deprecated.
Now callers can set correctly the file mode of the copied file.
Change-Id: I8fce01e4bc5707434c0cbc4aebbae1b6b64756f0
Signed-off-by: Ivan Frade <ifrade@google.com>
237abe6a added method getDeepenNots() with a default implementation and
method getDeepenNotFlag() to the interface DepthWalk. This affects
implementers which is ok in minor release following OSGi semantic
versioning.
Change-Id: I1c872da261fc6825e1e310127761b8b8a6d397d4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The only reference to this externalized text was deleted in c88d34b0.
Change-Id: Iecc7cc89192d69431dddb6550a02f66f0b09accc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Patterns should treat \r in file names as normal characters
Change-Id: Ica3e0fa4a58acf5326db46bb28571fe5f20f6cd2
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
This allows clients to use the --shallow-exclude parameter (producing a
"deepen-not <ref>" line when communicating with the server) in their fetch
commands when fetching against a JGit server using protocol v2.
Note that the implementation in this commit is somewhat inefficient, as
described in the TODO comment in DepthGenerator.
Change-Id: I9fad3ed9276b624d8f668356ffd99a067dc67ef7
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
In C Git, when a client fetches with "git fetch --shallow-since=<date>
origin <ref>", and all commits reachable from <ref> are older than
<date>, the server dies with a message "no commits selected for shallow
requests". That is, (1) the --shallow-since filter applies to the commit
pointed to by the ref itself, and (2) there is a check that at least one
commit is not filtered out. (The pack-protocol.txt documentation does
not describe this, but the C implementation does this.)
The implementation in commit 1bb430dc21 ("UploadPack: support
deepen-since in protocol v2", 2018-09-27) does neither (1) nor (2), so
do both of these.
Change-Id: I9946327a71627626ecce34ca2d017d2add8867fc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
The request receives a list of capabilities and takes out the "agent" to
offer it on its own setter (getAgent).
Do this at parse time: when reading the line if the capability is
"agent" set it directly in the builder.
This makes the treatment of "agent" consistent in v0/v1 and v2.
Change-Id: Ie4f9f2cad8639adeeaef4921df49a30a8ce5b42f
Signed-off-by: Ivan Frade <ifrade@google.com>
All of the input lines passed to pre-push hook scripts must be properly
terminated by '\n', so that normal shell scripts like the git-supplied
pre-push.sample work properly, even when pushing just a single branch.
With the old code, hook scripts that use the following pattern didn't
process the last line, because 'read' has a non-zero exit status when
EOF is encountered:
while read local_ref local_sha remote_ref remote_sha; do ... done
Change-Id: Id899662ed3fedef6c314fc4b2ddf91a6dcb98cbb
Signed-off-by: Markus Keller <markus.kell.r@gmail.com>
Use Integer.valueOf() to avoid the warning by implicit conversion due to
usage as argument object in String.format().
Change-Id: Ib314f629d54ae1ce9729c3837d66ce8982a1898a
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Before this commit, a force checkout would fail if there
were any conflicting files. After this commit, a force
checkout will overwrite the conflicting files, as expected.
Making this work required fixing a bug in DirCacheCheckout.
Before this commit, when DirCacheCheckout had
failOnConflict=false, it would delete all conflicting files
from the working copy and just leave them missing. After
this commit, DirCacheCheckout overwrites conflicting files
with the merge tree.
This change in DirCacheCheckout causes "reset --hard" and
"revert --abort" to behave as expected (previously they
would simply delete conflicting files, now they will be
overwritten from the merge tree).
Change-Id: If7e328ee792ef6511ab7d9c26d8d77c39210ec9f
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
UploadPack.getPeerUserAgent() doesn't produce the expected results for
protocol v2 requests. In v2, the agent reported in the request (in an
"agent=" line) is not in the clientCapabilities but in a field on its
own. This makes getPeerUserAgent default to the transport user agent.
Making "agent" a shared property between protocol v0/v1 and v2 fixes the
problem, simplifies the function and harmonizes the implementation
between protocol versions.
In a follow up commit the "agent" will be identified on parsing time,
instead of taking it from the client capabilities.
Change-Id: Idf9825ec4e0b81a1458c8e3701f3e28aafd8a32a
Signed-off-by: Ivan Frade <ifrade@google.com>
In protocol v2, a command request can be followed by server options
(lines like "agent=<>" and "server-option=<>"), but current code
doesn't accept those lines.
Advertise the "server-option" capability, parse the lines and add
them to the request objects.
Other code in JGit can see this options and act accordingly via the
protocol v2 hooks.
This should not require any change in the client side.
Change-Id: If3946390f9cc02d29644b6ca52534b6f757bda9f
Signed-off-by: Ivan Frade <ifrade@google.com>
* stable-5.1:
ssh: Prefer algorithms of the known host keys
Change-Id: I4868359c9df75cb2c51331789cb9f34473801569
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This is public facing, stable API.
Fortunately, this class is deprecated and will be removed in the next
major version bump.
Change-Id: I91193964732e9d1943e9dc613256196e9c9d1274
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
JSch prefers ssh-rsa key type. When the remote server supports ssh-rsa
key type then this key type will be used even if the known_hosts file
contains a host key for that host, but with different key type.
This caused an unexpected UnknownHostKey error.
To fix the issue first scan the known_hosts, the HostKeyRepository in
JSch API, for any already existing host keys for the target host and
modify the default session settings to prefer their algorithms. However,
do this only if there is no HostKeyAlgorithms setting active.
Change-Id: I236df2a860ddd9289a0a820ddf09c2dea3673d36
The code base has several @SuppressWarnings annotations to suppress
warnings raised by Error Prone, but those are not recognized by
Eclipse and there is currently no way to tell it about them [1].
Suppress them for now.
[1] https://bugs.eclipse.org/bugs/show_bug.cgi?id=392045
Change-Id: I3de7cfa8ad4370ca5be71e1303879c73ab6829c1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
One more step in removing state from UploadPack, using the request
object instead.
Unfortunately, hooks get from UploadPack information about the current
request. Changing the hooks to receive the request is a public API
change, so at the moment lets keep a reference to the current request.
This kills half the benefit of using a request object vs fields, but
at least we still get better modularity.
Change-Id: I86803d876a621b727c66ee73f2880c93190629e9
Signed-off-by: Ivan Frade <ifrade@google.com>
All data required in this function is available in the request object.
Use that object instead of class members. This reduces class state and
is more readable.
Make the function use a request object and remove the now unnecessary
field "deepenNotRefs".
Change-Id: If861e44c2860a78cf19f456d1b3feb7ddc314cce
Signed-off-by: Ivan Frade <ifrade@google.com>
These properties are protocol v2 specific, but they have clear default
no-op values and having them in the common superclass simplifies client
code.
Move properties deepenSince and deepenNotRefs up to FetchRequest. In
FetchV0Request, they are initialized with their no-op values (0 for
deepenSince and empty list for deepenNotRefs)
Change-Id: I9d46a6dfbe29ebd794b5a6482033cdc70d411a23
Signed-off-by: Ivan Frade <ifrade@google.com>
filterBlobLimit is not part of the UploadPack state, and as field
of the class is difficult to see where it is set or accessed.
Use the request object instead of a field. This reduces
UploadPack state and makes clearer how the value is used.
Change-Id: I96a04a5a8b31bf2243de701e1fd7ebb4080b49e2
Signed-off-by: Ivan Frade <ifrade@google.com>
Mark reference fields as final, annotate constructor parameters and
getters as @NonNull when appropiate and assert the incoming references
are non-null.
Change-Id: I0ef9a513a99313bf461fe9629ce6cc8b409bdedb
Signed-off-by: Ivan Frade <ifrade@google.com>
Some code apply to both, v1 and v2 requests, so it should receive
just a request instance.
Move all common fields to an abstract superclass that can be passed
to "version neutral" functions.
Change-Id: I47c22fb12065bc93767f78175e2b36cc43ccb5c5
Signed-off-by: Ivan Frade <ifrade@google.com>
In FetchV0Request, the fields "wantsIds" and "options" are called
"wantIds" and "clientCapabilities". Those names describe them better.
Rename FetchV2Request fields to follow fetch v0. This will make easier
to extract a superclass later.
Take also the chance to polish the javadoc.
Change-Id: Ia17dbbab8084f39cc529fef9ca5c65e189073767
Signed-off-by: Ivan Frade <ifrade@google.com>
Protocol v0/v1 parsing code doesn't have any real dependency on UploadPack.
Move it to its class and use a request object to read the data in
UploadPack.
This makes the code easier to test, keeps similar structure than protocol v2,
reduces the line count of UploadPack and paves the way to remove the
members as implicit parameters in it.
Change-Id: I8188da8bd77e90230a7e37c02d800ea18463694f
Signed-off-by: Ivan Frade <ifrade@google.com>
Uncaught exceptions are handled by java.lang.Thread's handler, which
prints it to stderr.
This is useful because InternalPushConnection is used in tests, and
during development, the server side may have programming errors that
manifest as RuntimeExceptions.
Before this change, all types of failures would lead to a uniform
failure message "test://test/conn0: push not permitted" on the client.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: I0983cbeb86d36fa7a9313373f5fce54971f804ec
* stable-4.6:
Replace Findbugs with Spotbugs in org.eclipse.jgit/pom.xml
Replace FindBugs with SpotBugs
Change-Id: I24417e4ebbba31f7ff6896d585ef807327411392
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.5:
Replace Findbugs with Spotbugs in org.eclipse.jgit/pom.xml
Replace FindBugs with SpotBugs
Change-Id: I1c077e8f3530ac717b1603d3307fd15d4335b8fe
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
First-want line parsing accepts lines with an optional whitespace, when
the spec is strict requiring a white space.
Validate the line enforcing that there is a white space between oid and
capabilities list.
Change-Id: I45ada67030e0720f9b402c298be18c7518c799b1
Signed-off-by: Ivan Frade <ifrade@google.com>
In protocol v0/v1 pack negotiation, the first want line contains the
options the client wants in effect. This parsing is done in UploadPack
but it doesn't have any interaction with that class.
Move the code to its own class and package, mark the current one
as deprecated (it is public API) and add unit tests.
Take the chance to move the parsing code from the constructor to a
factory method, making the class a simple container of results.
Change-Id: I1757f535dda78a4111a1c12c3a3b455a4b6f0c51
Signed-off-by: Ivan Frade <ifrade@google.com>
The usage of non-short-circuit logic is intentional, per the inline
comment added in change Ib4b35e357 as a follow-up to Ie3761ffb4 which
was a previously rejected attempt to "fix" a similar warning that had
been raised by FindBugs.
Change-Id: I3f6729f954d45d30ce697356d2ab3cc877d3ad54
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This reverts commit 37c7fbd661.
These filters weren't unused. Without them Eclipse raises 4 API errors.
Change-Id: I5ce443d40b5f517be4a315479e81246d40af1983
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
For example, instead of using
public @NonNull String getMyFavoriteString() { ... }
use
@NonNull
public String getMyFavoriteString() { ... }
This makes the style more consistent (the existing JGit code base
tends to lean toward the second style) and makes the source code
better reflect how the annotation is parsed, as a METHOD annotation.
Longer term, we should switch to a TYPE_USE annotation and switch to
the first style.
Noticed using a style checker that follows
https://google.github.io/styleguide/javaguide.html#s4.8.5-annotations
Change-Id: I9b9fa08035d805ca660520f812a84d2f47eff507
Reported-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
For example, instead of using
public @Nullable String getMyFavoriteString() { ... }
use
@Nullable
public String getMyFavoriteString() { ... }
This makes the style more consistent (the existing JGit code base
tends to lean toward the second style) and makes the source code
better reflect how the annotation is parsed, as a METHOD annotation.
Longer term, we should switch to a TYPE_USE annotation and switch to
the first style.
Noticed using a style checker that follows
https://google.github.io/styleguide/javaguide.html#s4.8.5-annotations
Change-Id: I07f4e67cc149fb8007f696a4663e10d4bfc57e3a
Reported-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
As described in the javadoc for org.eclipse.jgit.annotations.Nullable:
Warning: Please do not use this annotation on arrays. Different
annotation processors treat `@Nullable Object[]` differently: some
treat it as an array of nullable objects, for consistency with
versions of `Nullable` defined with `@Target TYPE_USE`, while others
treat it as a nullable array of objects. JGit therefore avoids using
this annotation on arrays altogether.
See the checker-framework manual[1] for details.
[1] http://types.cs.washington.edu/checker-framework/current/checker-framework-manual.html#faq-array-syntax-meaning
Change-Id: I14ffcf80adbb8145d797998de2f2fa6ab84c3ae3
Signed-off-by: Jonathan Nieder <jrn@google.com>
Previous commits block the addition to the repo of dangerous .gitmodules
files, but some could have been committed before those safeguards where
in place.
Add a check in DfsFsck to validate the .gitmodules files in the repo.
Use the same validation than the ReceivePack, translating the
results to FsckErrors.
Note that *all* .gitmodules files in the storage will be checked, not
only the latest version.
Change-Id: I040cf1f31a779419aad0292ba5e6e76eb7f32b66
Signed-off-by: Ivan Frade <ifrade@google.com>
errorType is already null in the caller and callee when unknown, so we
can replace a conditional call to a setter in the only caller with an
unconditionally provided @Nullable constructor parameter.
As a bonus, this lets us mark the field as final.
Change-Id: Ie2f929180e74ffa1aba8ec6caccfa81fbd8bfc04
Signed-off-by: Ivan Frade <ifrade@google.com>
The fsck test needs more detail about the error than an IOException
with an explanatory message.
Add an error identifier to the SubmoduleValidatorException and make
it the only throwable exception when parsing a file.
Change-Id: Ic3f0955b497e1681b25e681e1282e876cdf3d2c5
Signed-off-by: Ivan Frade <ifrade@google.com>
A .gitmodules file can include a submodule without a path to configure
the URL for a submodule that is only present on other branches.
A .gitmodules file can include a submodule with no URL and no path to
reserve the name for a submodule that existed in earlier history but
is not available from any URL any more.
"git fsck" permits both of these cases. Permit them in JGit as well
(instead of throwing NullPointerException).
Change-Id: I3b442639ad79ea7a59227f96406a12e62d3573ae
Reported-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
This was not updated with the original introduction of the new method.
Bug: 534731
Change-Id: Ic4589c3a209109a829fbb706a9bf38845134e904
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Since v4.7.5.201810051826-r~3 (SubmoduleAddCommand: Reject submodule
URIs that look like cli options, 2018-09-24), SubmoduleAddCommand
checks submodule names for ".." path components in
assertValidSubmoduleName. This additional check for the same is
redundant.
Change-Id: I993326a370978880b690dc133a81fa3025935bcb
Signed-off-by: Jonathan Nieder <jrn@gmail.com>
The text "<tree, blob>" with angle brackets should not be used in javadoc
since it is interpreted as an HTML tag and then rejected since it's not a
valid HTML tag. Wrap the text in a @literal tag.
Also add a missing space.
Change-Id: Ide045e8c04a39a916f5b2e964e58c151e4555830
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The main concern are submodule urls starting with '-' that could pass as
options to an unguarded tool.
Pass through the parser the ids of blobs identified as .gitmodules
files in the ObjectChecker. Load the blobs and parse/validate them
in SubmoduleValidator.
Change-Id: Ia0cc32ce020d288f995bf7bc68041fda36be1963
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In order to validate .gitmodules files, we first need to find them
in the incoming pack.
Do it in the ObjectChecker stage. Check in the tree objects if they
point to a .gitmodules file and report the tree id and the .gitmodules
blob id.
This can be used later to check if the file is in the root of the
project and if the contents are good.
While we're here, make isMacHFSGit more accurate by detecting variants
of filenames that vary in case.
[jn: tweaked NTFS and HFS+ checking; added more tests]
Change-Id: I70802e7d2c1374116149de4f89836b9498f39582
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In C git versions before 2.19.1, the submodule is fetched by running
"git clone <uri> <path>". A URI starting with "-" would be interpreted
as an option, causing security problems. See CVE-2018-17456.
Refuse to add submodules with URIs, names or paths starting with "-",
that could be confused with command line arguments.
[jn: backported to JGit 4.7.y, bringing portions of Masaya Suzuki's
dotdot check code in v5.1.0.201808281540-m3~57 (Add API to specify
the submodule name, 2018-07-12) along for the ride]
Change-Id: I2607c3acc480b75ab2b13386fe2cac435839f017
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
EolStreamTypeUtil didn't handle these correctly on Windows.
Add three new tests to verify that the crlf attribute is handled as
described at [1], and that core.eol=native produces the expected
line endings on check-out.
[1] https://git-scm.com/docs/gitattributes
Bug: 497290
Change-Id: Idd9b435e3256c1e3251cc7b966f2f0460e787f07
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Breaking implementers is ok in a minor version update following OSGi
semantic versioning. According to [1] adding a default method is ok if
risk of inheriting a method with the same name from multiple interfaces
is low.
[1] https://wiki.eclipse.org/Evolving_Java-based_APIs_2#Evolving_API_Interfaces
Change-Id: Iad354cb73cfff9a96b9a9852a3c4d9ba0c5df430
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
According to Error Prone, the class should also override:
int read(byte[], int, int)
otherwise multi-byte reads from this input stream are likely to be slow.
See https://errorprone.info/bugpattern/InputStreamSlowMultibyteRead
Change-Id: I33ab8cd30013447f2a0363b3a7b1424b79cb1818
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Since this constructor is package-private, so instead of deprecating
it, we can remove it right away.
Change-Id: I84ba72e8c94fb09412bbf7ce73b7eec72f61e964
Signed-off-by: Jonathan Nieder <jrn@google.com>
Deprecate constructors and methods taking a character set name as
a String, in favor of new variants taking a Charset.
Change-Id: I616c601daf232fa17610dba1087fd902030d46ea
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Support the deepen-since parameter when requested by a client using
protocol v2. This is done by:
- adding a DepthWalk.RevWalk#setDeepenSince method
- updating DepthGenerator to recognize when deepen-since is set
- recording in DepthWalk.Commit whether a commit is a boundary commit
Existing users of DepthWalk such as UploadPack previously recognized
boundary commits by comparing their depths against the threshold, not
tracking whether any parents were truly excluded. This behavior is
preserved - UploadPack considers a commit as boundary if its depth is
equal to the threshold *or* a parent was excluded (whether by depth or
by deepen-since).
Change-Id: I852bba6b1279f9cc8aee38282e9339d62b8dcddc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
In DepthGenerator, commits are always added to the "pending" queue
either at depth 0 (in the constructor) or after a depth check (in
next()), so it is redundant to check for depth after removing them from
the queue. Remove the check.
This redundancy seems to have been present since the introduction of
server-side shallow clone support in commit 9952223e06 ("Implement
server support for shallow clones", 2011-08-21).
Change-Id: Iad334935293367400c2901a25c0f4bf36c437cf2
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Replace explicit construction of BufferedReader with calls to the
utility method Files.newBufferedReader, which allows to specify
the charset.
Change-Id: I61b9451dbc8d9cf83fc8a5981292b8fdc713ce37
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
As reported by Error Prone:
An inner class should be static unless it references members of its
enclosing class. An inner class that is made non-static unnecessarily
uses more memory and does not make the intent of the class clear.
See https://errorprone.info/bugpattern/ClassCanBeStatic
Change-Id: Ib99d120532630dba63cf400cc1c61c318286fc41
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Support multiple prefixes when querying references to allow
implementor to minimize number of RPC calls.
Change-Id: I5f822fd7eaf9756b44750080d3056de138b64f4a
Signed-off-by: Minh Thai <mthai@google.com>
The commit message template contains a superfluous blank at the end of
the first line, which is deleted by this change. This is only relevant
for jgit contributors using Eclipse, not for jgit users.
Change-Id: I462deb49c26fb64b3dc2d1d75f1e40ef302b0fc9
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
This is a base change which prepares for subsequent bugfixes.
Change-Id: Iaadc93df37e45753d700be73669e68c03590adb5
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
* stable-5.1:
Fix ObjectUploadListener#close
Fix error handling in FileLfsServlet
ObjectDownloadListener#onWritePossible: Make code spec compatible
ObjectDownloadListener: Return from onWritePossible when data is written
Fix IOException when LockToken#close fails
Change-Id: If6e4b4786401c6598b9f3b1c2b7d7081b08acd35
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-5.0:
Fix ObjectUploadListener#close
Fix error handling in FileLfsServlet
ObjectDownloadListener#onWritePossible: Make code spec compatible
ObjectDownloadListener: Return from onWritePossible when data is written
Fix IOException when LockToken#close fails
Change-Id: Ib7a63b5144a89c213aff3b32c30a2a6526355e64
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.11:
Fix ObjectUploadListener#close
Fix error handling in FileLfsServlet
ObjectDownloadListener#onWritePossible: Make code spec compatible
ObjectDownloadListener: Return from onWritePossible when data is written
Fix IOException when LockToken#close fails
Change-Id: Iffe202a412b3bca1c8d8d7dc5dfd646c49838de9
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.10:
Fix ObjectUploadListener#close
Fix error handling in FileLfsServlet
ObjectDownloadListener#onWritePossible: Make code spec compatible
ObjectDownloadListener: Return from onWritePossible when data is written
Fix IOException when LockToken#close fails
Change-Id: I28ebf6138ccd9425fc05319de78c7716f0bdd199
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.9:
Fix ObjectUploadListener#close
Fix error handling in FileLfsServlet
ObjectDownloadListener#onWritePossible: Make code spec compatible
ObjectDownloadListener: Return from onWritePossible when data is written
Fix IOException when LockToken#close fails
Change-Id: Ib7d01cb0ece8b259156855045a53b8baf3fa2968
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.8:
Fix ObjectUploadListener#close
Fix error handling in FileLfsServlet
ObjectDownloadListener#onWritePossible: Make code spec compatible
ObjectDownloadListener: Return from onWritePossible when data is written
Fix IOException when LockToken#close fails
Change-Id: Id8eb635094336567d9f3c28ec985cd5127d31632
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.7:
Fix ObjectUploadListener#close
Fix error handling in FileLfsServlet
ObjectDownloadListener#onWritePossible: Make code spec compatible
ObjectDownloadListener: Return from onWritePossible when data is written
Fix IOException when LockToken#close fails
Change-Id: Iad9836811be034cf992ea25dad4409addba75115
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This happened if the LockTokens hard link was already deleted earlier.
Bug: 531759
Change-Id: Idc84bd695fac1a763b3cbb797c9c4c636a16e329
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Otherwise fetching all tags may pull in commits not on the
specified branches. Canonical git also does this.[1]
[1] https://github.com/git/git/blob/b160b6e69/builtin/clone.c#L1124
Bug: 538768
Change-Id: If0ac75fb9fae0c95d1a48b22954c54d4c3c09a47
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When not all branches are cloned, the fetch refspec for the
remote should not be "+refs/heads/*:refs/remotes/origin/*":
that would fetch all branches on the very next fetch, thus
making a clone with only a subset of the branches rather
pointless.
Instead, produce refspecs for the cloned branches only.
Canonical git also does this for its --single-branch case;
it doesn't have an option to clone only a subset of the branches
(only one or all).
Bug: 466858
Change-Id: Ie871880f757663437efac1e8b3313094f9e629b3
Also-by: Julian Enoch <julian.enoch@ericsson.com>
Signed-off-by: Julian Enoch <julian.enoch@ericsson.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fetch code has been moved to a ProtocolV2Parser, but ls-refs code is
still in UploadPack.
Moving it to the parser makes it easier to test, keeps the parsing
together and makes the two commands follow similar structure.
Change-Id: I573ce543e804ddeb9f83303b4af250b7cddc8cad
Signed-off-by: Ivan Frade <ifrade@google.com>
UploadPack.processShallow is doing too many things and offering a
confusing API. It is filtering or splitting commit ids depending
if a parameter is null and writing them out (or not) depending on another
flag.
Iterate the list and announce to Consumers what object ids need
to be marked as (un)shallow. They decide what to do with them.
As java consumers don't allow to propagate exceptions, define
our own functional interface for it.
Change-Id: I619cf2eed9b1e0338151120b8ef87a463fbe8827
Signed-off-by: Ivan Frade <ifrade@google.com>
shallowCommits variable is nullable only to signal later
if code has gone through the processShallow code.
Use a flag to indicate that condition and make shallowCommits
non-nullable. This makes code clearer and paves the way to untangle
processShallow in a follow-up commit.
Change-Id: I898e6aaf6f860bb6afafbac05653ba116c9b2da6
Signed-off-by: Ivan Frade <ifrade@google.com>
* stable-5.1:
Fix logging null if called process fails
Change-Id: Iba771dd8d680b154cb628c7571a2bbc2ecf50a3b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If some process executed by FS#readPipe ends in an error,
the error stream is never set as errorMessage because
FS#GobblerThread#waitForProcessCompletion always returned true.
This caused LOG#warn to be called with null.
Return false whenever FS#GobblerThread#waitForProcessCompletion fails.
Bug: 538723
Change-Id: Ic9492bd688431d52c8665f7a2efec2989e95a4ce
Signed-off-by: Cliffred van Velzen <cliffred@cliffred.nl>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.11:
Fix NoSuchFileException during directory cleanup in RefDirectory
Externalize warning message in RefDirectory.delete()
Suppress warning for trying to delete non-empty directory
Change-Id: Ic7eaa0b6a4e750bc7853eb549a9e126269ae22cf
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.10:
Fix NoSuchFileException during directory cleanup in RefDirectory
Externalize warning message in RefDirectory.delete()
Suppress warning for trying to delete non-empty directory
Change-Id: I191d56e3c0f11cf53076b06c7e7a05492c7a03f1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.9:
Fix NoSuchFileException during directory cleanup in RefDirectory
Externalize warning message in RefDirectory.delete()
Suppress warning for trying to delete non-empty directory
Change-Id: Ied2d7a70c5544ff012687a1aeb6e07394d9bd6fd
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.8:
Fix NoSuchFileException during directory cleanup in RefDirectory
Externalize warning message in RefDirectory.delete()
Suppress warning for trying to delete non-empty directory
Change-Id: I5e6cc35f3673545e7ff857e6ed0bcd2c44e50316
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.7:
Fix NoSuchFileException during directory cleanup in RefDirectory
Externalize warning message in RefDirectory.delete()
Suppress warning for trying to delete non-empty directory
Change-Id: I9ec6352b5ff57aa1a3380079dc9165890cc76d49
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Change-Id: Icec16c01853a3f5ea016d454b3d48624498efcce
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit 5e68fe245f)
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This is actually a fairly common occurrence; deleting the parent
directories can work only if the file deleted was the last one
in the directory.
Bug: 537872
Change-Id: I86d1d45e1e2631332025ff24af8dfd46c9725711
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
(cherry picked from commit d9e767b431)
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
According to String.replaceAll JavaDoc:
"Note that backslashes (\) and dollar signs ($) in the replacement
string may cause the results to be different than if it were being
treated as a literal replacement string; see Matcher.replaceAll. Use
java.util.regex.Matcher.quoteReplacement to suppress the special meaning
of these characters, if desired."
Bug: 536318
Change-Id: Ib70cfec41bf73e14d23d94d14aee05a25b1e87f6
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Matthias Sohn