Add a new ssh client implementation based on Apach MINA sshd 2.0.0.
This implementation uses JGit's own config file parser and host entry
resolver. Code inspection of the Apache MINA implementation revealed
a few bugs or idiosyncrasies that immediately would re-introduce bugs
already fixed in the past in JGit.
Apache MINA sshd is not without quirks either, and I had to configure
and override more than I had expected. But at least it was all doable
in clean ways.
Apache MINA boasts support for Bouncy Castle, so in theory this should
open the way to using more ssh key algorithms, such as ed25519.
The implementation is in a separate bundle and is still not used in
the core org.eclipse.jgit bundle. The tests re-use the ssh tests from
the core test bundle.
Bug: 520927
Change-Id: Ib35e73c35799140fe050d1ff4fb18d0d3596580e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add support for git-receive-pack to the ssh git server and add two
new tests for pushing.
This actually uncovered an undocumented requirement in TransportSftp:
the FTP rename operation assumes POSIX semantics, i.e., that the
target is removed. This works as written only for servers that
support and advertise the "posix-rename@openssh.com" FTP extension.
Our little Apache MINA server does not advertise this extension.
Fix the FtpChannel implementation for Jsch to handle this case in a
meaningful way so that it can pass the new "push over sftp" test.
Add more tests to test the behavior of server host key checking.
Also refactor the tests generally to separate better the test
framework from the actual tests.
Bug: 520927
Change-Id: Ia4bb85e17ddacde7b36ee8c2d5d454bbfa66dfc3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Introduce an FtpChannel abstraction, which can be obtained from a
RemoteSession. In JSchSession, wrap a JSch ChannelSftp as such an
FtpChannel. The JSch-specific SftpException is also mapped to a
generic FtpException. Rewrite TransportSftp to use only the new
abstraction layer.
This makes it possible to provide alternate ssh/sftp implementations.
Bug: 520927
Change-Id: I379026f7d4122f34931df909a28e73c02cd8a1da
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Do not add an artificial line break to the message, since it may become
much wider due to the embedded exception messages anyway.
The layout shall be controlled by the egit supplied message dialog using
layout constraints.
Bug: 540537
Change-Id: I4257b52e5e59689dfcbab47bd7c075b3fd031837
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Factor out a helper that calls next() and tunnels IOException in a
RuntimeException, similar to TunnelException.tunnel(RevWalk::next) in
Guava terms[1].
This should make the code a little more readable. No functional
change intended.
[1] https://github.com/google/guava/issues/2828#issuecomment-304187823
Change-Id: I97c062d03a17663d5c40895fd3d2c6a7306d4f39
Signed-off-by: Jonathan Nieder <jrn@google.com>
MissingObjectException and IncorrectObjectTypeException are subclasses
of IOException.
Change-Id: Ib4e1f37ce1b0b08e69ba3375bbdb6ee82ee4f036
Signed-off-by: Jonathan Nieder <jrn@google.com>
Suppose that a repository has the following commit graph:
B C
\ /
A
and it was cloned with --shallow-exclude=A. DepthGenerator does not mark
C as shallow, causing an invalid repository to be produced on the
client, because A is not sent. (A similar issue occurs when
--shallow-since is used to exclude A but neither B nor C.)
This happens whenever an excluded commit has more than one child that is
to be sent to the client. Fix DepthGenerator to handle this case
correctly.
While we're editing DepthWalk.Commit, fix the documentation of
DepthWalk.Commit#isBoundary.
Change-Id: I7068abf0fe0c864d1b0e56e1616dad1aa8719411
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Avoid loading versions from @bazel_skylib//:lib.bzl, because it is now
deprecated and is going to be removed in future skylib versions:
https://github.com/bazelbuild/bazel-skylib/blob/master/lib.bzl#L17
Change-Id: Ie722351de5254f611cf3489c8689922c8346af7f
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Move the bulk of the basic parsing and host entry handling into a
new class OpenSshConfigFile that has no dependencies on any concrete
ssh implementation. Make the existing OpenSshConfig use the new
parser.
Introduce a new class SshConstants collecting all the various ssh-
related string literals. Also use TreeMaps with a case-insensitive
key comparator instead of converting keys to uppercase. Add a test
to verify that keys are matched case-insensitively.
Most of the parsing code was simply moved, except that the new
parser supports looking up entries given host name, port, and user
name, and can thus handle more %-substitutions correctly. This
feature is not yet used and cannot be used with JSch since JSch
only has a ConfigRepository.getConfig(String) interface.
The split is still worth the trouble as it opens the way to using
another ssh client altogether. Apache MINA sshd, for instance,
resolves host entries giving host name, port, and user name.
(Apache MINA has a built-in ssh config handling, but that has
problems, too: its pattern matching is case-insensitive, and its
merging of host entries if several match is not the same as in
OpenSsh. But with this refactoring, it will be possible to plug in
OpenSshConfigFile into an Apache MINA sshd client without dragging
along JSch.)
One test case that doesn't make sense anymore has been removed. It
tested that repeatedly querying for a host entry returned the same
object. That is no longer true since the caching has been moved to
a deeper level.
Bug: 520927
Change-Id: I6381d52b29099595e6eaf8b05c786aeeaefbf9cc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a simple ssh git server based on Apache MINA sshd, and use it
in new tests that verify ssh operations and in particular a number
of bugs that had cropped up over time in JSch.
The git server supports fetching only, and sftp access.
The tests are all in an abstract base class; the concrete JschSshTest
class only provides ssh-specific test setup. So the same tests could
be run easily also with some other ssh client.
Bug: 520927
Change-Id: Ide6687b717fb497a29fc83f22b07390a26dfce1d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Do not export o.e.j.internal.transport.parser as public package;
restrict visibility to org.eclipse.jgit.test only.
Add two packages that were not listed at all (o.e.j.internal.revwalk
and o.e.j.internal.submodule) marked as x-internal:=true.
Change-Id: I9188356075515ad354b724102fbd6304b682de6a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When a source folder is marked as a test folder, JDT requires that it
has an output folder different from the one used for regular sources.
Therefore give the test folders in org.eclipse.jgit.test a separate
output folder "bin-tst".
Moreover JDT reports errors if non-test classes have dependencies on
test classes. Therefore remove the "test" annotation from
org.eclipse.jgit.junit.
Change-Id: Ib527439ff5b7d7b570b8a60819ecaa70f59c63a3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Remove the S20181031145145 Orbit definition; that one was for our
purposes broken (mistakes in the org.apache.sshd-core and
net.i2p.crypto.eddsa receipes).
Change-Id: I8246d0837bc80165dd23780236b58fd9fe2fe0bc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Also replace native git_repository rule with Starlark rule. This is
needed because in recent Bazel versions native git_repository rule
is deprecated.
Change-Id: I2c19fd31693a930d7d35fdbb93bfa4abf21fa2aa
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
The removed method and the new interface method only affect implementors
which is ok in a minor release following OSGi semantic versioning.
Change-Id: Ia5e55bd803965c7590c9278eecc6bdd36241383f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The copyfile entry in the manifest file copies the contents of the file
but doesn't keep the executable flag. This is inconsistent with repo
tool behaviour, plus is natural to expect that the copy of a executable
file is executable.
Transfer the executable bit when copying the file, aligning the
RepoCommand with repo tool and user expectations.
Change-Id: I01b24f482d5939e01d496f032388b3a5c02a912a
Signed-off-by: Ivan Frade <ifrade@google.com>
The RepoCommand.RemoteReader interface doesn't offer access to the mode
of a file. Caller can only default to mark the copied objects as regular
files, losing e.g. the executable bit (if set).
Add a new method readFileWithMode that returns the contents and mode of
the remote file. It supersedes the readFile method, that is marked as
deprecated.
Now callers can set correctly the file mode of the copied file.
Change-Id: I8fce01e4bc5707434c0cbc4aebbae1b6b64756f0
Signed-off-by: Ivan Frade <ifrade@google.com>
Many tests verify the contents of files in a try-with-resources
incantation that clutters the code.
Extract that verification to an "assertContents" method, that is easier
to read.
Change-Id: If430eac6f5b9ae352e42b2d43867ceb6cd618fbb
Signed-off-by: Ivan Frade <ifrade@google.com>
237abe6a added method getDeepenNots() with a default implementation and
method getDeepenNotFlag() to the interface DepthWalk. This affects
implementers which is ok in minor release following OSGi semantic
versioning.
Change-Id: I1c872da261fc6825e1e310127761b8b8a6d397d4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The only reference to this externalized text was deleted in c88d34b0.
Change-Id: Iecc7cc89192d69431dddb6550a02f66f0b09accc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Patterns should treat \r in file names as normal characters
Change-Id: Ica3e0fa4a58acf5326db46bb28571fe5f20f6cd2
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
ProtocolV2Parser has unit tests but protocol v0/v1 is not covered.
Change-Id: I96022e8f8eb60d4da748d1042474fd1efd67e882
Signed-off-by: Ivan Frade <ifrade@google.com>
Parsed requests represent object ids (SHA1) in ObjectId instances but tests
use strings for those ids because they are easier to define.
Create a custom matcher that hides the conversion from string to
ObjectId. Note that this reverses the existing code conversion (it was
transforming ObjectIds into string).
This produces more readable code, consistent with the other hamcrest
assertions.
Change-Id: I47ba1d25557d791fe74fb93c740ff7de9923cc00
Signed-off-by: Ivan Frade <ifrade@google.com>
This allows clients to use the --shallow-exclude parameter (producing a
"deepen-not <ref>" line when communicating with the server) in their fetch
commands when fetching against a JGit server using protocol v2.
Note that the implementation in this commit is somewhat inefficient, as
described in the TODO comment in DepthGenerator.
Change-Id: I9fad3ed9276b624d8f668356ffd99a067dc67ef7
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
In C Git, when a client fetches with "git fetch --shallow-since=<date>
origin <ref>", and all commits reachable from <ref> are older than
<date>, the server dies with a message "no commits selected for shallow
requests". That is, (1) the --shallow-since filter applies to the commit
pointed to by the ref itself, and (2) there is a check that at least one
commit is not filtered out. (The pack-protocol.txt documentation does
not describe this, but the C implementation does this.)
The implementation in commit 1bb430dc21 ("UploadPack: support
deepen-since in protocol v2", 2018-09-27) does neither (1) nor (2), so
do both of these.
Change-Id: I9946327a71627626ecce34ca2d017d2add8867fc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
The request receives a list of capabilities and takes out the "agent" to
offer it on its own setter (getAgent).
Do this at parse time: when reading the line if the capability is
"agent" set it directly in the builder.
This makes the treatment of "agent" consistent in v0/v1 and v2.
Change-Id: Ie4f9f2cad8639adeeaef4921df49a30a8ce5b42f
Signed-off-by: Ivan Frade <ifrade@google.com>
Thomas Wolf